In newer QEMU libvirt combinations acpi support is no longer tolerated
and ignored. Therfore before upgrading the test capabilities to QEMU
8.1.0 replies removing the acpi feature from the domain XMLs.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow //disk/target@removable for scsi disk devices, since QEMU has support
the removable attribute for scsi-hd device from v0.14.0[1].
[1]: 419e691f8e: scsi-disk: Allow overriding SCSI INQUIRY removable bit
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
openSUSE Leap 15.{4,5} are supported under libvirt's distro support
statement, but they only contain attr version 2.4.47.
Reverts: dffeef89ef
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Do for all other profiles what we already do for the
virt-aa-helper one. In this case we limit the feature to AppArmor
3.x, as it was never implemented for 2.x.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
For AppArmor 3.x we can use 'include if exists', which frees us
from having to create a dummy override. For AppArmor 2.x we keep
things as they are to avoid introducing regressions.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Implement the standard AppArmor 3.x abstraction extension
approach.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
The subprofile can only work by including the abstraction shipped
in the passt package, which we can't assume is present, and
'include if exists' doesn't work well on 2.x.
No distro that's stuck on AppArmor 2.x is likely to be shipping
passt anyway.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Compared to profiles, we only need a single preprocessing step
here, as there is no variable substitution happening.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Perform an additional preprocessing step before the existing
variable substitution. This is the same approach that we already
use to customize systemd unit files based on whether the service
supports TCP connections.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
We will soon need to base some decisions on whether AppArmor 3.x
or 2.x is present on the system.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
After v8.1.0-61-g030faee28d it is no longer necessary to make the
/proc/meminfo file nonseekable as our code that fills the file
with spoofed values can handle seeking just fine.
Previously, `free(1)` was okay with failed lseek(), but this was
ages ago and meanwhile the procps project moved to creating a
library and moved the file parsing code under an exported
function. In attempt to make the function callable multiple
times, it can lseek() multiple times and failure to do so is
fatal.
This reverts commit 7664955086
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/492
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Fix the syntax-check failures (which can be seen after
python3-flake8-import-order package is installed) with the help
of isort[1]:
289/316 libvirt:syntax-check / flake8 FAIL 5.24s exit status 2
[1]: https://pycqa.github.io/isort/
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As it turns out, apparmor 2.x and 3.x behave differently or have differing
levels of support for local customizations of profiles and profile
abstractions. Additionally the apparmor 2.x tools do not cope well with
'include if exists'. Revert this commit until a more complete solution is
developed that works with old and new apparmor.
Reverts: 9b743ee190
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
If VIR_ASYNC_JOB_NONE flag is present, job.current is equal
to NULL, which leads to SIGSEGV. Thus, this check should be
moved up.
Fixes: v8.0.0-427-gf304de0df6
Signed-off-by: Nikolai Barybin <nikolai.barybin@virtuozzo.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In one of my previous commits I've introduced @logfd variable
that was supposed to hold FD of passt logfile. But I've forgot to
assign the qemuDomainOpenFile() retval to it.
Fixes: 8511b96a31
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In our passt example XML we use /var/log/passt.log as path to the
log file. This is not optimal, because in case of unprivileged
daemon, neither libvirt nor passt has enough permissions to
create the file. Let's move the file under /tmp.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are a few situations where passt itself is unable to create
a file because it runs under QEMU user (e.g. just like our
example from formatdomain.rst suggests: /var/log/passt.log). If
libvirtd runs with sufficient permissions (e.g. as root) it can
create the file and set seclabels on it so that passt can then
open it.
Ideally, we would just pass pre-opened FD, but this wasn't viewed
as secure enough [1]. So lets just create the file and set
seclabels.
For the case when both libvirtd and passt have the same
permissions, well then we fail before even needing to fork() and
exec().
1: https://archives.passt.top/passt-dev/20230606225836.63aecebe@elisabeth/
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2209191
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
New storage types are not implemented in generators for -drive and the
xen config. Explicitly reject them in case of a programming error.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Update to v8.0.0-1739-g5f9dd6a8ce and build on a newer kernel and with
newer libblkio.
Notable changes:
- 'fdset' feature is supported for the vdpa block backend provided by
libblkio
- 'xsaves' feature is optional for EPYC-Rome
- 'cryptodev-backend-lkcf' and 'PIIX3-xen' devices removed
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If there are no parameters, there is nothing to validate.
If params == NULL, memcpy below results in memcpy(sorted, NULL, 0),
which is UB.
Found by UBSAN. Example of this codepath: virDomainBlockCopy()
(where nparams == 0 is valid) -> qemuDomainBlockCopy()
Signed-off-by: Oleg Vasilev <oleg.vasilev@virtuozzo.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
When detaching a device, the following race condition may happen:
Once qemuDomainSignalDeviceRemoval() marks the device for
removal, it returns true, which means it is the caller
that marked the device for removal is going to remove the
device from domain definition.
But qemuDomainWaitForDeviceRemoval() may still receive
timeout from virDomainObjWaitUntil() which is implemented
by pthread_cond_timedwait() due to an unavoidable race
between the expiration of the timeout and the predicate
state(priv->unplug.alias) change.
And then qemuDomainWaitForDeviceRemoval() will return 0,
thus the caller will not remove the device from domain
definition.
In this situation, the device is still present in the domain
definition but doesn't exist in qemu anymore. Worse, there is
no way to remove it from the domain definition.
Solution is to recheck the value of priv->unplug.alias to
determine who is going to remove the device from domain
definition.
Signed-off-by: zuo boqun <zuoboqun@baidu.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Qemu 8.1.0 will add discard_no_unref option for qcow2 images.
When this option is enabled (default=false), then it will no longer
unreference clusters when guest does a discard, but it will just free
the blocks (useful for incremental backups for example) and pass the
discard to the lower layer.
This was implemented to avoid fragmentation within the qcow2 image.
Signed-off-by: Jean-Louis Dupond <jean-louis@dupond.be>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qcow2 driver allows passing discards to the storage while keeping
the reference of the block, and just marking it as zeroed. This can
decrease the levels of fragmentation of the qcow2 metadata when
discards are enabled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a config where both DIMM and non-DIMM <memory> devices are used so
that it validates that only DIMMs require memory slots.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Memory slots are required only for DIMM-like devices, but the maximum
memory address space is relevant also for other non-DIMM memory devices
such as virtio-mem. Allow configurations where no slots are added.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Memory slots are required only for DIMM-like devices, while other
devices defined via <memory> such as virtio-mem may use the PCI bus and
thus do not require/consume a memory slot.
Fix the validation code to calculate the required count of memory
devices only for DIMMs and NVDIMMs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Specify the memory size by using '-m size=2048k' instead of just '-m 2'.
The new syntax is used when memory hotplug is enabled. To preserve
memory sizing, if memory hotplug is disabled the size is rounded down to
the nearest mebibyte.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This should not be needed, but here's what's happening:
virStrToLong_*() family of functions was switched from strtol*()
to g_ascii_strtol*() in order to handle corner cases on Windows
(most notably parsing hex numbers with base=0) - see
v9.4.0-61-g2ed41d7cd9. But what we did not realize back then, is
the fact that g_ascii_strtol*() family has their own global lock
rendering virStrToLong_*() function unsafe between fork() +
exec(). Worse, if one of the threads has to wait for the lock (or
on its corresponding condition), then errno is mangled and
g_ascii_strtol*() signals an error, even though there's no error.
Read more here:
https://gitlab.gnome.org/GNOME/glib/-/issues/3034
Nevertheless, if we make glib init the g_ascii_strtol*() global
state (by calling one function from g_ascii_strtol*() family),
then there shouldn't be any congestion on the lock and thus no
errno mangling.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The current implementation of virConnectBaselineHypervisorCPU in QEMU
driver can provide a CPU definition that will not work on all hosts in
case they have different maximum physical address size. So when we get
the info from domain capabilities, we need to choose the smallest
physical address size for the computed baseline CPU definition.
https://bugzilla.redhat.com/show_bug.cgi?id=2171860
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already report the hosts physical address size in host capabilities,
but computing a baseline CPU definition is done from domain
capabilities.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Newer GCC (13.1.1 in my case) wrongly reports "maybe uninitialized"
warning for this variable inside the next condition. Even though this
accusation is wrong (the condition is guarded by the same condition as
the for cycle initializing it), initialize it during the declaration so
compilation errors don't stop others and maybe also future proof the
code for changes.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Using os.system("cp {0} {1}".format(...)) has two issues, it does not
work on Windows, but more importantly it can cause issues in case one of
the directories has a space in it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This has two main advantages:
- it parses the number with C locale explicitly
- it behaves the same on Windows as on Linux and BSD
both of which are wanted behaviours.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With the last user gone this function can be abolished. It is
preferable to use _ll instead since that is not a subject to 32/64 bit
scaling.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It is used to fill an unsigned long long anyway and if it is negative
than there is really an issue somewhere.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
