https://bugzilla.redhat.com/show_bug.cgi?id=971485
As of d7f9d82753 we copy the listen
address from the qemu.conf config file in case none has been provided
via XML. But later, when migrating, we should not include such listen
address in the migratable XML as it is something autogenerated, not
requested by user. Moreover, the binding to the listen address will
likely fail, unless the address is '0.0.0.0' or its IPv6 equivalent.
This patch introduces a new boolean attribute to virDomainGraphicsListenDef
to distinguish autofilled listen addresses. However, we must keep the
attribute over libvirtd restarts, so it must be kept within status XML.
(cherry picked from commit 6546017c50)
iscsiadm now supports specifying hostnames in the portal argument [1]
Instead of resolving the hostname to a single IPv4 address, pass the
hostname to isciadm, allowing IPv6 targets to work.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=624437
(cherry picked from commit cbdb3c7326)
https://bugzilla.redhat.com/show_bug.cgi?id=964177
Though both libvirt and QEMU's document say RTC_CHANGE returns
the offset from the host UTC, qemu actually returns the offset
from the specified date instead when specific date is provided
(-rtc base=$date).
It's not safe for qemu to fix it in code, it worked like that
for 3 years, changing it now may break other QEMU use cases.
What qemu tries to do is to fix the document:
http://lists.gnu.org/archive/html/qemu-devel/2013-05/msg04782.html
And in libvirt side, instead of replying on the value from qemu,
this converts the offset returned from qemu to the offset from
host UTC, by:
/*
* a: the offset from qemu RTC_CHANGE event
* b: The specified date (-rtc base=$date)
* c: the host date when libvirt gets the RTC_CHANGE event
* offset: What libvirt will report
*/
offset = a + (b - c);
The specified date (-rtc base=$date) is recorded in clock's def as
an internal only member (may be useful to exposed outside?).
Internal only XML tag "basetime" is introduced to not lose the
guest's basetime after libvirt restarting/reloading:
<clock offset='variable' adjustment='304' basis='utc' basetime='1370423588'/>
(cherry picked from commit e31b5cf393)
https://bugzilla.redhat.com/show_bug.cgi?id=903480
During domain destruction it's possible that the learnIPAddressThread has
already removed the interface prior to the teardown filter path being run.
The teardown code would only be telling the thread to terminate.
(cherry picked from commit 64919d978e)
If snapshot creation failed for example due to invalid use of the
"REUSE_EXTERNAL" flag, libvirt killed access to the original image file
instead of the new image file. On machines with selinux this kills the
whole VM as the selinux context is enforced immediately.
* qemu_driver.c:qemuDomainSnapshotUndoSingleDiskActive():
- Kill access to the new image file instead of the old one.
Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=906639
(cherry picked from commit 177046753f)
Function qemuDomainSetBlockIoTune() was checking QEMU capabilities
even when !(flags & VIR_DOMAIN_AFFECT_LIVE) and the domain was
shutoff, resulting in the following problem:
virsh # domstate asdf; blkdeviotune asdf vda --write-bytes-sec 100
shut off
error: Unable to change block I/O throttle
error: unsupported configuration: block I/O throttling not supported with this QEMU binary
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=965016
(cherry picked from commit 5af3ce8277)
By default files in a FUSE mount can only be accessed by the
user which created them, even if the file permissions would
otherwise allow it. To allow other users to access the FUSE
mount the 'allow_other' mount option must be used. This bug
prevented non-root users in an LXC container from reading
the /proc/meminfo file.
https://bugzilla.redhat.com/show_bug.cgi?id=967977
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 922ebe4ead)
Many applications use /dev/tty to read from stdin.
e.g. zypper on openSUSE.
Let's create this device node to unbreak those applications.
As /dev/tty is a synonym for the current controlling terminal
it cannot harm the host or any other containers.
Signed-off-by: Richard Weinberger <richard@nod.at>
(cherry picked from commit 9a0ac6d9c2)
Conflicts:
src/lxc/lxc_controller.c
This patch implements support for the "cpu-add" QMP command that plugs
CPUs into a live guest. The "cpu-add" command was introduced in QEMU
1.5. For the hotplug to work machine type "pc-i440fx-1.5" is required.
(cherry picked from commit c12b2be516)
Call virLogVMessage instead of virLogMessage, since libudev
called us with a va_list object, not a list of arguments.
Honor message priority and strip the trailing newline.
https://bugzilla.redhat.com/show_bug.cgi?id=969152
(cherry picked from commit f753dd62f9)
Before trying to mount the selinux filesystem in a container
use is_selinux_enabled() to check if the machine actually
has selinux support (eg not booted with selinux=0)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 95c6cc344b)
Re-add the selinux header to lxc_container.c since other
functions now use it, beyond the patch that was just
reverted.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 63ea1e5432)
Change bbe97ae968 caused the
QEMU driver to ignore ENOENT errors from cgroups, in order
to cope with missing /proc/cgroups. This is not good though
because many other things can cause ENOENT and should not
be ignored. The callers expect to see ENXIO when cgroups
are not present, so adjust the code to report that errno
when /proc/cgroups is missing
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit c2cf5f1c2a)
Found that I was unable to start existing domains after updating
to a kernel with no cgroups support
# zgrep CGROUP /proc/config.gz
# CONFIG_CGROUPS is not set
# virsh start test
error: Failed to start domain test
error: Unable to initialize /machine cgroup: Cannot allocate memory
virCgroupPartitionNeedsEscaping() correctly returns errno (ENOENT) when
attempting to open /proc/cgroups on such a system, but it was being
dropped in virCgroupSetPartitionSuffix().
Change virCgroupSetPartitionSuffix() to propagate errors returned by
its callees. Also check for ENOENT in qemuInitCgroup() when determining
if cgroups support is available.
(cherry picked from commit bbe97ae968)
Describe the new cgroups layout, how to customize placement
of guests and what virsh commands are used to access the
parameters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 486a86eb18)
It is possible to build a kernel without swap cgroup controls
present. This causes a fatal error when querying memory
parameters. Treat missing swap controls as meaning "unlimited".
The fatal error remains if the user tries to actually change
the limit.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit f493d83fbd)
Xen 4.3 fixes a mistake in the libxl event handler signature where the
event owned by the application was defined as const. Detect this and
define the libvirt libxl event handler signature appropriately.
(cherry picked from commit 43b0ff5b1e)
Don't reuse the return value of virStorageBackendFileSystemIsMounted.
If it's 0, we'd return it even if the mount command failed.
Also, don't report another error if it's -1, since one has already
been reported.
Introduced by 258e06c.
https://bugzilla.redhat.com/show_bug.cgi?id=981251
(cherry picked from commit 13fde7ceab)
When creating a virtual FC HBA with virsh/libvirt API, an error message
will be returned: "error: Node device not found",
also the 'nodedev-dumpxml' shows wrong information of wwpn & wwnn
for the new created device.
Signed-off-by: xschen@tnsoft.com.cn
This reverts f90af69 which switched wwpn & wwwn in the wrong place.
https://www.kernel.org/doc/Documentation/scsi/scsi_fc_transport.txt
(cherry picked from commit 3c0d5e224c)
If networkUnplugBandwidth is called on a network which has
no bandwidth defined, print a warning instead of crashing.
This can happen when destroying a domain with bandwidth if
bandwidth was removed from the network after the domain was
started.
https://bugzilla.redhat.com/show_bug.cgi?id=975359
(cherry picked from commit 658c932ab4)
Don't check for '\n' at the end of file if zero bytes were read.
Found by valgrind:
==404== Invalid read of size 1
==404== at 0x529B09F: virCgroupGetValueStr (vircgroup.c:540)
==404== by 0x529AF64: virCgroupMoveTask (vircgroup.c:1079)
==404== by 0x1EB475: qemuSetupCgroupForEmulator (qemu_cgroup.c:1061)
==404== by 0x1D9489: qemuProcessStart (qemu_process.c:3801)
==404== by 0x18557E: qemuDomainObjStart (qemu_driver.c:5787)
==404== by 0x190FA4: qemuDomainCreateWithFlags (qemu_driver.c:5839)
Introduced by 0d0b409.
https://bugzilla.redhat.com/show_bug.cgi?id=978356
(cherry picked from commit 306c49ffd5)
Free the old XML strings before overwriting them if the user
has chosen to reedit the file or force the redefinition.
Found by Alex Jia trying to reproduce another bug:
https://bugzilla.redhat.com/show_bug.cgi?id=977430#c3
(cherry picked from commit 1e3a252974)
Cherry-picked from 38ada092d1
As a consequence of the cgroup layout changes from commit 'cfed9ad4', the
lxcDomainGetSchedulerParameters[Flags]()' and lxcGetSchedulerType() APIs
failed to return data for a non running domain. This can be seen through
a 'virsh schedinfo <domain>' command which returns:
Scheduler : Unknown
error: Requested operation is not valid: cgroup CPU controller is not mounted
Prior to that change a non running domain would return:
Scheduler : posix
cpu_shares : 0
vcpu_period : 0
vcpu_quota : 0
emulator_period: 0
emulator_quota : 0
This patch will restore the capability to return configuration only data
for a non running domain regardless of whether cgroups are available.
NOTE: Needed to change the VIR_STRDUP(ret, "posix"); to ret = strdup("posix");
and added the virReportOOMError(); on failure.
Cherry-picked from b237545341
As a consequence of the cgroup layout changes from commit '632f78ca', the
qemuDomainGetSchedulerParameters[Flags]()' and qemuGetSchedulerType() APIs
failed to return data for a non running domain. This can be seen through
a 'virsh schedinfo <domain>' command which returns:
Scheduler : Unknown
error: Requested operation is not valid: cgroup CPU controller is not mounted
Prior to that change a non running domain would return:
Scheduler : posix
cpu_shares : 0
vcpu_period : 0
vcpu_quota : 0
emulator_period: 0
emulator_quota : 0
This patch will restore the capability to return configuration only data
for a non running domain regardless of whether cgroups are available.
NOTE: Needed to change the VIR_STRDUP(ret, "posix"); to ret = strdup("posix");
and added the virReportOOMError(); on failure.
Don't free the stream on error if we've successfully added it
to the hash table, since it will be freed by virChrdevHashEntryFree
callback.
Preserve the error message before calling virStreamFree, since it
resets the error.
Introduced by 4716138, crashing since 6921892.
Reported by Sergey Fionov on libvir-list.
(cherry picked from commit a32b41746c)
Because it's a valid combination. p2p still uses a separate channel
for qemu migration, so there's value in letting the user specify a manual
migrate URI for overriding auto-port, or libvirt's FQDN lookup.
What _isn't_ allowed is --migrateuri and TUNNELLED, since there is
no separate migration channel. Disallow that instead
(cherry picked from commit 5e1de4fcdd)
Apps using libvirt will often have code like
if (virXXXX() < 0) {
virErrorPtr err = virGetLastError();
fprintf(stderr, "Something failed: %s\n",
err && err->message ? err->message :
"unknown error");
return -1;
}
Checking for a NULL error object or message leads to very
verbose code. A virGetLastErrorMessage() helper from libvirt
can simplify this to
if (virXXXX() < 0) {
fprintf(stderr, "Something failed: %s\n",
virGetLastErrorMessage());
return -1;
}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 69c6a58a1d)
If we are just ejecting media, ret == -1 even after the retry loop
determines that the tray is open, as requested. This means media
disconnect always report's error.
Fix it, and fix some other mini issues:
- Don't overwrite the 'eject' error message if the retry loop fails
- Move the retries decrement inside the loop, otherwise the final loop
might succeed, yet retries == 0 and we will raise error
- Setting ret = -1 in the disk->src check is unneeded
- Fix comment typos
cc: mprivozn@redhat.com
(cherry picked from commit 406d8a9809)
In 84c59ffa I've tried to fix changing ejectable media process. The
process should go like this:
1) we need to call 'eject' on the monitor
2) we should wait for 'DEVICE_TRAY_MOVED' event
3) now we can issue 'change' command
However, while waiting in step 2) the domain monitor was locked. So
even if qemu reported the desired event, the proper callback was not
called immediately. The monitor handling code needs to lock the
monitor in order to read the event. So that's the first lock we must
not hold while waiting. The second one is the domain lock. When
monitor handling code reads an event, the appropriate callback is
called then. The first thing that each callback does is locking the
corresponding domain as a domain or its device is about to change
state. So we need to unlock both monitor and VM lock. Well, holding
any lock while sleep()-ing is not the best thing to do anyway.
(cherry picked from commit 543af79a14)
qemu-img resize will fail with "The new size must be a multiple of 512"
if libvirt doesn't round it first.
This fixes rhbz#951495
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
(cherry picked from commit 9a8f39d097)
This patch is in relation to Bug 966449:
https://bugzilla.redhat.com/show_bug.cgi?id=966449
This is a patch addressing the coredump.
Thread 1 must be calling nwfilterDriverRemoveDBusMatches(). It does so with
nwfilterDriverLock held. In the patch below I am now moving the
nwfilterDriverLock(driverState) further up so that the initialization, which
seems to either take a long time or is entirely stuck, occurs with the lock
held and the shutdown cannot occur at the same time.
Remove the lock in virNWFilterDriverIsWatchingFirewallD to avoid
double-locking.
(cherry picked from commit 0ec376c20a)
Commit 894f784948 broke the v1.0.5-maint
branch because VIR_STRDUP() didn't exist in the v1.0.5 release so the
resulting build is missing that symbol.
This patch is only for the v1.0.5-maint branch.
Commit 7f15ebc7a2 introduced a bug
happening when guests without a <graphics> element are migrated.
The initialization of listenAddress happens unconditionally
from the cookie even if the cookie->graphics pointer was NULL.
Moved the initialization to where it is safe.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
(cherry picked from commit 9684bb11fd)
This should resolve:
https://bugzilla.redhat.com/show_bug.cgi?id=959191
The problem was that qemuUpdateActivePciHostdevs was returning 0
(success) when no hostdevs were present, but would otherwise return -1
(failure) even when it completed successfully. It is only called from
qemuProcessReconnect(), and when qemuProcessReconnect got back an
error, it would not only stop reconnecting, but would terminate the
guest qemu process "to remove danger of it ending up running twice if
user tries to start it again later".
(This bug was introduced in commit 011cf7ad, which was pushed between
v1.0.2 and v1.0.3, so all maintenance branches from v1.0.3 up to 1.0.5
will need this one line patch applied.)
(cherry picked from commit 2ea45647bc)
A literal IPv6 must be escaped, otherwise migration fails with:
unable to execute QEMU command 'drive-mirror': address resolution failed
for f0::0d:5901: Servname not supported for ai_socktype
since QEMU treats everything after the first ':' as the port.
(cherry picked from commit 2136327e23)
gcc 4.1.2 (hello, RHEL 5!) fails to build on 32-bit platforms with:
conf/domain_conf.c: In function 'virDomainDefParseXML':
conf/domain_conf.c:10581: warning: integer constant is too large for 'long' type
Problem introduced in commit f8e3221f9.
* src/conf/domain_conf.c (virDomainDefParseXML): Mark large constants.
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit f6817c70b4)
Since f03dcc5 we use [::] as the listening address both on qemu
command line in -incoming and in nbd-server-start QMP command.
However the latter requires just :: without the braces.
(cherry picked from commit 2326006410)
https://bugzilla.redhat.com/show_bug.cgi?id=965169 documents a
problem starting domains when cgroups are enabled; I was able
to reliably reproduce the race about 5% of the time when I added
hooks to domain startup by 3 seconds (as that seemed to be about
the length of time that qemu created and then closed a temporary
thread, probably related to aio handling of initially opening
a disk image). The problem has existed since we introduced
virCgroupMoveTask in commit 9102829 (v0.10.0).
There are some inherent TOCTTOU races when moving tasks between
kernel cgroups, precisely because threads can be created or
completed in the window between when we read a thread id from the
source and when we write to the destination. As the goal of
virCgroupMoveTask is merely to move ALL tasks into the new
cgroup, it is sufficient to iterate until no more threads are
being created in the old group, and ignoring any threads that
die before we can move them.
It would be nicer to start the threads in the right cgroup to
begin with, but by default, all child threads are created in
the same cgroup as their parent, and we don't want vcpu child
threads in the emulator cgroup, so I don't see any good way
of avoiding the move. It would also be nice if the kernel were
to implement something like rename() as a way to atomically move
a group of threads from one cgroup to another, instead of forcing
a window where we have to read and parse the source, then format
and write back into the destination.
* src/util/vircgroup.c (virCgroupAddTaskStrController): Ignore
ESRCH, because a thread ended between read and write attempts.
(virCgroupMoveTask): Loop until all threads have moved.
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 83e4c77547)
'make check' fails since commit 470d5c46 on any system with dash
as /bin/sh, because '<<<' is a bash extension. For example:
nwfilterschematest: 23: /home/eblake/libvirt/tests/schematestutils.sh: Syntax error: redirection unexpected
Also, there is no need to spawn a grep process when shell globbing
can do the same.
* tests/schematestutils.sh: Replace bashism and subprocess with a
faster and portable construct.
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 1d21b884a3)
