RHEL-6's rpmbuild wipes the docdir for a (sub-)package if any %doc
directives are present, prior to copying in the marked documentation.
This means we can't prepopulate this directory with the HTML
documentation during the %install phase.
Instead, move the HTML documentation to a temporary directory during
%install and mark the contents of this temporary directory with %doc.
This fixes a build regression introduced in
commit e23216da9a
Author: Cole Robinson <crobinso@redhat.com>
Date: Wed Sep 25 13:20:40 2013 -0400
spec: Clean up distribution of ChangeLog (and others)
where the libvirt-docs sub-RPM gained a %doc directive, thus
triggering the RPM bug.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
All our .pl scripts had the executable bit set, except for one.
Make it consistent (even if we invoke the scripts as an argument
to $(PERL) rather than directly).
* src/check-aclrules.pl: Make executable.
Signed-off-by: Eric Blake <eblake@redhat.com>
All *-info virsh commands output a list of colon-seperated key-val pairs.
But virsh net-info command misses this colon for key "Name" and "UUID".
Signed-off-by: Hao Liu <hliu@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
In the 730af8f2cd commit we are fixing broken qemu startup on systems
with ancient qemu. This commit introduces the regression test for that
specific case to make sure we don't break it again.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
On the domain startup, this function is called to dump some info about
the CPUs. At the beginning of the function we check if we aren't running
older qemu which is not exposing the CPUs via 'qom-list'. However, we
are not checking for even older qemus, which throw 'CommandNotFound'
error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
A USB filter is stored in a hostdev. The original code doesn't
allocate hostdev->info that is expected to be allocated with hostdev.
So use virDomainHostdevDefAlloc() to allocate both as we expect.
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
This patch shuts up the following warning of clang
on Mac OS X:
virsh.c:2761:22: error: assigning to 'char *' from 'const char [6]' discards qualifiers
[-Werror,-Wincompatible-pointer-types-discards-qualifiers]
rl_readline_name = "virsh";
^ ~~~~~~~
The warning happens because rl_readline_name on Mac OS X comes
from an old readline header that still uses 'char *', while it
is 'const char *' in readline 4.2 (April 2001) and newer.
Tested on Mac OS X 10.8.5 (clang-500.2.75) and Fedora 19 (gcc 4.8.1).
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Added a macro similar to the GLib's GLIB_CHECK_VERSION so that one can
simply do something like:
#if LIBVIR_CHECK_VERSION(1,1,3)
/* Call function here that appeared in 1.1.3 and newer */
virSomeNewFunction();
#endif
Without a 'return 0' in the stub lxcStartFuse() method, the
compiler warns:
lxc/lxc_fuse.c:374: error: control reaches end of non-void function
[-Wreturn-type]
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The glibc setxid is supposed to be async signal safe, but
libc developers confirm that it is not. This causes a problem
when libvirt_lxc starts the FUSE thread and then runs clone()
to start the container. If the clone() was done before the
FUSE thread has completely started up, then the container
will hang in setxid after clone().
The fix is to avoid creating any threads until after the
container has been clone()'d. By avoiding any threads in
the parent, the child is no longer required to run in an
async signal safe context, and we thus avoid the glibc
bug.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Report the error in virPortAllocatorAcquire instead
of doing it in every caller.
The error contains the port range name instead of the intended
use for the port, e.g.:
Unable to find an unused port in range 'display' (65534-65535)
instead of:
Unable to find an unused port for SPICE
This also adds error reporting when the QEMU driver could not
find an unused port for VNC, VNC WebSockets or NBD migration.
The connection pointer in the closeCallback data was never
initialized, making the unref in remoteClientCloseFunc a no-op.
This fixes the following leak in virsh when the daemon closes
the connection unexpectedly:
1,179 (288 direct, 891 indirect) bytes in 1 blocks are
definitely lost in loss record 745 of 792
at 0x4C2A6D0: calloc (in vgpreload_memcheck-amd64-linux.so)
by 0x4E9643D: virAllocVar (viralloc.c:558)
by 0x4ED2425: virObjectNew (virobject.c:190)
by 0x4F675AC: virGetConnect (datatypes.c:116)
by 0x4F6EA06: do_open (libvirt.c:1136)
by 0x4F71017: virConnectOpenAuth (libvirt.c:1481)
by 0x129FFA: vshReconnect (virsh.c:337)
by 0x128310: main (virsh.c:2470)
Noticed while revieweing the patches for qemu's new migration state.
* include/libvirt/libvirt.h.in (_virDomainJobInfo): Fix typo,
grammar.
* src/libvirt.c (virDomainGetJobInfo): Add cross reference.
Signed-off-by: Eric Blake <eblake@redhat.com>
QEMU 1.6.0 introduced new migration status: setup
Libvirt does not expect such string in QMP and refuses to migrate with error
"unexpected migration status in setup"
This patch fixes it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1025108
So far qemuSetupHostdevCGroup was called very early during hotplug, even
before we knew the device we were about to hotplug was actually
available. By calling the function later, we make sure QEMU won't be
allowed to access devices used by other domains.
Another important effect of this change is that hopluging USB devices
specified by vendor and product (but not by their USB address) works
again. This was broken since v1.0.5-171-g7d763ac, when the call to
qemuFindHostdevUSBDevice was moved after the call to
qemuSetupHostdevCGroup, which then used an uninitialized USB address.
https://bugzilla.redhat.com/show_bug.cgi?id=1018267
The aim of virObject refing and urefing is to tell where the object is
to be used and when is no longer needed. Hence any object shouldn't be
used after it has been unrefed, as we might be the last to hold the
reference. The better way is to call virObjectUnref() *after* the last
object usage. In this specific case, the monitor EOF handler was called
after the qemuMonitorIO called virObjectUnref. Not only that @mon was
disposed (which is not used in the handler anyway) but the @mon->vm
which is causing a SIGSEGV:
2013-11-15 10:17:54.425+0000: 20110: error : qemuMonitorIO:688 : internal error: early end of file from monitor: possible problem:
qemu-kvm: -incoming tcp:01.01.01.0:49152: Failed to bind socket: Cannot assign requested address
Program received signal SIGSEGV, Segmentation fault.
qemuProcessHandleMonitorEOF (mon=<optimized out>, vm=0x7fb728004170) at qemu/qemu_process.c:299
299 if (priv->beingDestroyed) {
(gdb) p *priv
Cannot access memory at address 0x0
(gdb) p vm
$1 = (virDomainObj *) 0x7fb728004170
(gdb) p *vm
$2 = {parent = {parent = {magic = 3735928559, refs = 0, klass = 0xdeadbeef}, lock = {lock = {__data = {__lock = 2, __count = 0, __owner = 20110, __nusers = 1, __kind = 0, __spins = 0, __list = {__prev = 0x0,
__next = 0x0}}, __size = "\002\000\000\000\000\000\000\000\216N\000\000\001", '\000' <repeats 26 times>, __align = 2}}}, pid = 0, state = {state = 0, reason = 0}, autostart = 0, persistent = 0,
updated = 0, def = 0x0, newDef = 0x0, snapshots = 0x0, current_snapshot = 0x0, hasManagedSave = false, privateData = 0x0, privateDataFreeFunc = 0x0, taint = 304}
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the qemuProcessReconnectHelper() a new thread that does all the
interesting work is spawned. The rationale is to not block the daemon
startup process in case of unresponsive qemu. However, the thread
handler is a local variable which gets lost once the control goes out of
scope. Hence the thread gets leaked. We can avoid this if the thread
isn't made joinable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The @list->callbacks is an array that is inflated whenever a new event
is added, e.g. via virDomainEventCallbackListAddID(). However, when we
are freeing the array, we free the items within it but forgot to
actually free it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These two chunks had to be part of df4283a55b. But for some unclear
reason, the weren't. Anyway, these two variables are not used anywhere
within function. They're initialized to NULL and then VIR_FREE()-d. And
there's no reason do do two NOPs, right?
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While trying to compare netfs against my new gluster pool, I
discovered two things:
virt-xml-validate chokes on valid xml produced by 'virsh pool-dumpxml'
[yet another reason that ALL patches that add new xml should be adding
corresponding tests]
When using glusterfs FUSE mounts, you cannot access a subdirectory
of a gluster volume. The recommended workaround in the gluster
community is to mount the volume to an intermediate location, then
bind-mount the desired subdirectory to the final location. Maybe
we should teach libvirt to do bind-mounting, but for now I chose to
just document the limitation.
* docs/storage.html.in: Improve documentation.
* docs/schemas/storagepool.rng (sourcefmtnetfs): Allow all
formats, and drop redundant info-vendor.
* tests/storagepoolxml2xmltest.c (mymain): New test.
* tests/storagepoolxml2xmlin/pool-netfs-gluster.xml: New file.
* tests/storagepoolxml2xmlout/pool-netfs-gluster.xml: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Before:
$ virsh iface-list
Name State MAC Address
--------------------------------------------
br0 active f0🇩🇪f1:dc:b8:b0
virbr2 active 52:54:00:61:78:0c
After:
$ virsh iface-list
Name State MAC Address
---------------------------------------------------
br0 active f0🇩🇪f1:dc:b8:b0
virbr2 active 52:54:00:61:78:0c
Change the alignment to match the domain listing function.
Before:
$ virsh pool-list
Name State Autostart
-----------------------------------------
boot-scratch active no
default active no
glusterpool active no
$ virsh pool-list --details
Name State Autostart Persistent Capacity Allocation Available
-------------------------------------------------------------------------------
boot-scratch running no yes 117.99 GiB 101.40 GiB 16.60 GiB
default running no yes 117.99 GiB 101.40 GiB 16.60 GiB
glusterpool running no yes 29.40 GiB 44.23 MiB 29.36 GiB
After:
$ virsh pool-list
Name State Autostart
-------------------------------------------
boot-scratch active no
default active no
glusterpool active no
$ virsh pool-list --details
Name State Autostart Persistent Capacity Allocation Available
---------------------------------------------------------------------------------
boot-scratch running no yes 117.99 GiB 101.40 GiB 16.60 GiB
default running no yes 117.99 GiB 101.40 GiB 16.60 GiB
glusterpool running no yes 29.40 GiB 44.23 MiB 29.36 GiB
When opening a new connection to the driver, nwfilterOpen
only succeeds if the driverState has been allocated.
Move the privilege check in driver initialization before
the state allocation to disable the driver.
This changes the nwfilter-define error from:
error: cannot create config directory (null): Bad address
To:
this function is not supported by the connection driver:
virNWFilterDefineXML
https://bugzilla.redhat.com/show_bug.cgi?id=1029266
ifdef LIBXL_HAVE_DOMAIN_CREATE_RESTORE_PARAMS hides a multi-line body
for a brace-less else. Add braces to ensure proper logic is applied.
Without this fix, new domains cannot be started. Both
libxl_domain_create_new and libxl_domain_create_restore are called when
starting a new domain leading to this error:
libxl: error: libxl.c:324:libxl__domain_rename: domain with name "guest" already exists.
libxl: error: libxl_create.c:800:initiate_domain_create: cannot make domain: -6
The QOM path in qemu that contains the CPUID registers of a running VM
may not be present (introduced in QEMU 1.5).
Since commit d94b781771 we have a regression with QEMU that don't
support reporting of the CPUID register state via the monitor as the
process startup code expects the path to exist.
This patch adds code that checks with the monitor if the requested path
already exists and uses it only in this case.
There were two separate places with that were stringifying type of a
volume. One of the places was out of sync with types implemented
upstream.
To avoid such problems in the future, this patch adds a common function
to convert the type to string and reuses it across the two said places.
Add an extra space before the first column as we have when listing
domains.
Previous output:
$ virsh vol-list glusterpool
Name Path
-----------------------------------------
asdf gluster://gluster-node-1/gv0/asdf
c gluster://gluster-node-1/gv0/c
cd gluster://gluster-node-1/gv0/cd
$ virsh vol-list glusterpool --details
Name Path Type Capacity Allocation
----------------------------------------------------------------------
asdf gluster://gluster-node-1/gv0/asdf unknown 0.00 B 0.00 B
c gluster://gluster-node-1/gv0/c unknown 16.00 B 16.00 B
cd gluster://gluster-node-1/gv0/cd unknown 0.00 B 0.00 B
New output:
$ virsh vol-list glusterpool
Name Path
------------------------------------------------------------------------------
asdf gluster://gluster-node-1/gv0/asdf
c gluster://gluster-node-1/gv0/c
cd gluster://gluster-node-1/gv0/cd
$ virsh vol-list glusterpool --details
Name Path Type Capacity Allocation
------------------------------------------------------------------------
asdf gluster://gluster-node-1/gv0/asdf unknown 0.00 B 0.00 B
c gluster://gluster-node-1/gv0/c unknown 16.00 B 16.00 B
cd gluster://gluster-node-1/gv0/cd unknown 0.00 B 0.00 B
As of libvirt 1.1.1 and systemd 205, the cgroups layout used by
libvirt has some changes. Update the 'cgroups.html' file from
the website to describe how it works in a systemd world.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the host side of an LXC container console disconnected
and the guest side continued to write data, until the PTY
buffer filled up, the LXC controller would busy wait. It
would repeatedly see POLLHUP from poll() and not disable
the watch.
This was due to some bogus logic detecting blocking
conditions. Upon seeing a POLLHUP we must disable all
reading & writing from the PTY, and setup the epoll to
wake us up again when the connection comes back.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'none' machine type is something only intended for use
by libvirt probing capabilities. It isn't something that
is useful for running real VM instances. As such it should
not be exposed to users in the capabilities.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virQEMUCapsProbeQMPMachineTypes method iterates over machine
types copying them into the qemuCapsPtr object. It only updates
the qemuCaps->nmachinetypes value at the end though. So if OOM
occurs in the middle, the destructor of qemuCapsPtr will not
free the partially initialized machine types.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To avoid code duplication between snapshot configuration code that
parses the disk source too we need to split out this code that will be
reused later on.
This patch tries to be code movement, some aspects of this function will
be refactored later.
If the managedsave image is corrupted, e.g. the XML part is, we fail to
parse it and throw an error, e.g.:
error: Failed to start domain jms8
error: XML error: missing security model when using multiple labels
This is okay, as we can't really start the machine and avoid undefined
qemu behaviour. On the other hand, the error message doesn't give a
clue to users what should they do. The consensus here would be to thrown
a warning to logs saying "Hey, you've got a corrupted file".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1027096
If there's the following snippet in the domain XML, the domain will be
lost upon the daemon restart (if the domain is started prior restart):
<seclabel type='dynamic' relabel='yes'/>
The problem is, the 'label', 'imagelabel' and 'baselabel' are parsed
whenever the VIR_DOMAIN_XML_INACTIVE is *not* present or the label is
static. The latter is not our case, obviously. So, when libvirtd starts
up, it finds domain state xml and parse it. During parsing, many XML
flags are enabled but VIR_DOMAIN_XML_INACTIVE. Hence, our parser tries
to extract 'label', 'imagelabel' and 'baselabel' from the XML which
fails for model='none'. Err, this model - even though not specified in
XML - can be taken from qemu wide config file: /etc/libvirtd/qemu.conf.
However, in order to know we are dealing with model='none' the code in
question must be moved forward a bit. Then a new check must be
introduced. This is what the first two chunks are doing.
But this alone is not sufficient. The domain state XML won't contain the
model attribute without slight modification. The model should be
inserted into the XML even if equal to 'none' and the state XML is being
generated - what if the origin (the @security_driver variable in
qemu.conf) changes during libvirtd restarts?
At the end, a test to catch this scenario is introduced.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
