The first argument should be const char ** instead of
char **, because this is a search function and as such it
doesn't, and shouldn't, alter the haystack in any way.
This change means we no longer have to cast arrays of
immutable strings to arrays of mutable strings; we still
have to do the opposite, though, but that's reasonable.
<filesystem type='ram' accessmode='passthrough'>
<source usage='524288' units='KiB'/>
<target dir='/dev/shm'/>
</filesystem>
would lead to lxcContainerMountAllFS calling STRPREFIX
on a NLL pointer because it failed to check if fs->src->path
was non-NULL. This is a regression caused by
commit da665fbd48
Author: Olga Krishtal <okrishtal@virtuozzo.com>
Date: Thu Jul 14 16:52:38 2016 +0300
filesystem: adds possibility to use storage pool as fs source
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
<filesystem type='ram' accessmode='passthrough'>
<source usage='524288' units='KiB'/>
<target dir='/dev/shm'/>
</filesystem>
would lead to lxcContainerResolveSymlinks calling
access(NULL) because it failed to check if fs->src->path
was non-NULL. This is a regression caused by
commit da665fbd48
Author: Olga Krishtal <okrishtal@virtuozzo.com>
Date: Thu Jul 14 16:52:38 2016 +0300
filesystem: adds possibility to use storage pool as fs source
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1363773
Imagine that you're creating a transient domain, but for some reason,
starting it fails. That is virLXCProcessStart() returns an error. With
current code, in the error handling code the domain object is removed
from the domain object list, @vm is set to NULL and controls jump to
enjob label where virLXCDomainObjEndJob() is called which dereference vm
leading to instant crash.
The fix is to end the job in the error handling code and only after that
remove the domain from the list and jump onto cleanup label instead of
endjob.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So commit 306b3a8504 tried mimicking behaviour of commit 540c339a25, but
added a virObjectRef(vm) only after virDomainObjListAdd() in
lxcDomainDefineXMLFlags() and not in lxcDomainCreateXMLWithFiles().
That way undefining a domain that was started with different XML than
defined will leave the domain object in a state with not enough
references to then remove it. Hence any lxcDomainDestroyFlags() called
afterwards crashes the daemon.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1351057
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch forces container's init process, to become a session leader,
that is its session ID is made the same as its process ID.
That might seem unnecessary in general, but if we want to checkpoint a
container with CRIU, which is needed for container migration,
we must ensure that the SID of each process inside the container points
to a process that lives in the same PID namespace as the container.
Therefore, we force that the session leader is the init.
Signed-off-by: Katerina Koukiou <k.koukiou@gmail.com>
Any error happening after the hand shake in the lxc controller
will not result in a failure as errors are checked during the handshake.
Move the handshake after the last possible error.
Commit da665fbd introduced the following condition to virLXCProcessEnsureRootFS
and openvzReadFSConf:
if (!(<some_var> = virDomainFSDefNew()) < 0)
which broke the build on fedora with GCC 5.3.1: "logical not is only applied to
the left hand side of comparison".
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Allow to store driver specific data on a per-vcpu basis.
Move of the virDomainDef*Vcpus* functions was necessary as
virDomainXMLOptionPtr was declared below this block and I didn't want to
split the function headers.
(This patch had been pushed earlier in
commit cd5c9f21de, but was reverted in
commit 1549f16832 because it had been
accidentally pushed during the freeze for release 2.0.0)
This patch takes the code out of
lxcContainerRenameAndEnableInterfaces() that adds all IP addresses and
IP routes to the interface, and puts it into a utility function
virNetDevIPInfoAddToDev() in virnetdevip.c so that it can be used by
anyone.
One small change in functionality -
lxcContainerRenameAndEnableInterfaces() previously would add all IP
addresses to the interface while it was still offline, then set the
interface online, and then add the routes. Because I don't want the
utility function to set the interface online, I've moved this up so
the interface is first set online, then IP addresses and routes are
added. This is the same order that the network service from
initscripts (in ifup-ether) does it, so it shouldn't pose any problem
(and hasn't, in the tests that I've run).
(This patch had been pushed earlier in commit
f1e0d0da11, but was reverted in commit
05eab47559 because it had been
accidentally pushed during the freeze for release 2.0.0)
This patch takes the code out of
lxcContainerRenameAndEnableInterfaces() that adds all IP addresses and
IP routes to the interface, and puts it into a utility function
virNetDevIPInfoAddToDev() in virnetdevip.c so that it can be used by
anyone.
One small change in functionality -
lxcContainerRenameAndEnableInterfaces() previously would add all IP
addresses to the interface while it was still offline, then set the
interface online, and then add the routes. Because I don't want the
utility function to set the interface online, I've moved this up so
the interface is first set online, then IP addresses and routes are
added. This is the same order that the network service from
initscripts (in ifup-ether) does it, so it shouldn't pose any problem
(and hasn't, in the tests that I've run).
It makes more sense to have the logging at the lower level so other
callers can share the goodness.
While removing so much stuff from / touching so many lines in
lxcContainerRenameAndEnableInterfaces() (which used to have this
debug/error logging), label names were changed and it was updated to
use the now-more-common method of initializing ret to -1 (failure),
then setting to 0 right before the cleanup label.
a.k.a. <hostdev mode='capabilities' type='net'>.
This replaces the existing nips, ips, nroutes, and routes with a
single virNetDevIPInfo, and simplifies the code by calling that
object's parse/format/clear functions instead of open coding.
These functions all need to be called from a utility function that
must be located in the util directory, so we move them all into
util/virnetdevip.[ch] now that it exists.
Function and struct names were appropriately changed for the new
location, but all code is unchanged aside from motion and renaming.
This patch splits virnetdev.[ch] into multiple files, with the new
virnetdevip.[ch] containing all the functions related to setting and
retrieving IP-related info for a device (both addresses and routes).
Commit c9a641 (first appearred in 1.2.12) added support for setting
the guest-side IP address of veth devices in lxc domains.
Unfortunately, it hardcoded the assumption that the proper prefix for
any IP address with no explicit prefix in the config should be "24";
that is only correct for class C IPv4 addresses, but not for any other
IPv4 address, nor for any IPv6 address.
The good news is that there is already a function in libvirt that will
determine the proper default prefix for any IP address. This patch
replaces the use of the ill-fated VIR_SOCKET_ADDR_DEFAULT_PREFIX with
calls to virSocketAddrGetIPPrefix().
lxcContainerRenameAndEnableInterfaces() isn't making a copy of the
interface's ifname_guest (into newname), it's just copying the pointer
to it. This means that when it later calls VIR_FREE(newname), it's
actually freeing up (and fortunately NULLing out, so at least we don't
try to access free'd memory) netDef->ifname_guest.
I'm tired of mistyping this all the time, so let's do it the same all
the time (similar to how we changed all "Pci" to "PCI" awhile back).
(NB: I've left alone some things in the esx and vbox drivers because
I'm unable to compile them and they weren't obviously *not* a part of
some API. I also didn't change a couple of variables named,
e.g. "somethingIptables", because they were derived from the name of
the "iptables" command)
Move all APIs with a virHostMEM name prefix out into new
util/virhostmem.h & util/virhostmem.c files
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move all APIs with a virHostCPU name prefix out into new
util/virhostcpu.h & util/virhostcpu.c files
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In preparation for moving all the CPU related APIs out of
the nodeinfo file, give them a virHostCPU name prefix.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In preparation for moving all the memory related APIs out of
the nodeinfo file, give them a virHostMem name prefix.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Nearly all the methods in the nodeinfo file are given a
'const char *sysfs_prefix' parameter to override the
default sysfs path (/sys/devices/system). Every single
caller passes in NULL for this, except one use in the
unit tests. Furthermore this parameter is totally
Linux-specific, when the APIs are intended to be cross
platform portable.
This removes the sysfs_prefix parameter and instead gives
a new method linuxNodeInfoSetSysFSSystemPath for use by
the test suite.
For two of the methods this hardcodes use of the constant
SYSFS_SYSTEM_PATH, since the test suite does not need to
override the path for thos methods.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
On LXC domain startup we have already called virDomainObjSetDefTransient
to fill vm->newDef.
There is no need to call virDomainLiveConfigHelperMethod which has the
ability to fill newDef if it's NULL.
On LXC domain startup we have already called virDomainObjSetDefTransient
to fill vm->newDef.
There is no need to call virDomainLiveConfigHelperMethod which has the
ability to fill newDef if it's NULL.
On LXC domain startup we have already called virDomainObjSetDefTransient
to fill vm->newDef.
There is no need to call virDomainLiveConfigHelperMethod which has the
ability to fill newDef if it's NULL.
A few functions using virDomainLiveConfigHelperMethod use the generic
name 'vmdef' to point to the persistent definition.
Use persistentDef and/or persistentDefCopy to make its purpose obvious.
The virConnectOpenInternal method opens the libvirt client
config file and uses it to resolve things like URI aliases.
There may be driver specific things that are useful to
store in the config file too, so rather than have them
re-parse the same file, pass the virConfPtr down to the
drivers.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Similarly to the domain definition validator add a device validator. The
change to the prototype of the domain validator is necessary as
virDomainDeviceInfoIterateInternal requires a non-const pointer.
Remove the live attribute and mark the definition as transient
whether the domain is runing or not.
There were only two callers left calling with live=false:
* testDomainStartState, where the domain already is active
because we assigned vm->def->id just a few lines above the call
* virDomainObjGetPersistentDef, which now only calls
virDomainObjSetDefTransient for an active domain
Commit 45ec297d from November 2010:
Make state driver device hotplug/update actually transient
added virDomainObjSetDefTransient calls to the domain startup
function in several drivers.
In November 2011, commit 8866eed:
Set aliases for LXC/UML console devices
added a call earlier in the startup function, without removing the
existing ones.
Also, in the UML driver it seems the function never did anything
useful - vm->def->id is set asynchronnously in umlNotifyEvent.
At the time of calling virDomainObjSetDefTransient with live=false,
vm->def->id was likely still -1, making the call a no-op.
When building using -Og, gcc sees that some variables can be used
uninitialized It can be debatable whether it is possible with our
codeflow, but functions should be self-contained and initializations are
always good. The return instead of goto is due to actualType being used
in the cleanup.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Adjust the code to perform the virLXCDomainObjBeginJob first
and then the call virDomainLiveConfigHelperMethod.
As Ján Tomko pointed out, in virDomainLiveConfigHelperMethod,
there is a check to see if the domain is active when AFFECT_LIVE is set.
Since virLXCDomainObjBeginJob unlocks the virDomainObjPtr lock,
the domain could possibly be destroyed while we wait for the job
and the check results would no longer be valid.
Signed-off-by: Katerina Koukiou <k.koukiou@gmail.com>
