Fully stub out the virCgroupGetAppRoot method as done with other
methods in the file, rather than just the body. This lets us
annotate the unused parameter to avoid a warning
I noticed that /var/lib/libvirt/dnsmasq/*.conf used the wrong word;
it was intended to match the wording in src/util/xml.c.
* src/network/bridge_driver.c (networkDnsmasqConfContents): Fix typo.
* tests/networkxml2confdata/*.conf: Update accordingly.
* Autotools changes:
- Don't assume Qemu is Linux-only
- Check Linux headers only on Linux
- Disable firewalld on FreeBSD
* Initctl:
Initctl seem to present only on Linux, so stub it on other platforms
* Raw I/O: Linux-only as well
* Headers cleanup
make check fails in check-symsorting if configure is not run in
the source directory. Prefixing symfile names with $(srcdir)
fixes this.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This patch adds a new domain lookup helper qemuDomObjFromDomainDriver
that lookups the domain and leaves the driver locked. The driver is
returned as the second argument of that function. If the lookup fails
the driver is unlocked to help avoid cleanup codepaths.
This patch also improves docs for the helpers.
This patch gets rid of the undeterministic error reporting code done on
return values of get(pw|gr)nam_r. With this patch, if the group record
is not returned by the corresponding function this error is not
considered fatal even if errno != 0. The error is logged in such case.
Move the code for matching hostdev instances out of virDomainHostdevFind
and into virDomainHostdevMatch method, which in turn calls out to other
helper methods depending on the type of hostdev.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rename virDomainHostdevPartsParse to virDomainHostdevDefParseSubsys
to reflect the fact that it only deals with hostdevs uing the
traditional mode=subsystem, and not mode=capabilities
Rename virDomainHostSourceFormat to virDomainHostdevDefFormatSubsys
for the same reason.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
virStorageFileGetLVMKey and virStorageFileGetSCSIKey
both return heap allocated strings, so the return value
should not be marked const.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add check-symsorting.pl to perform case-insensitive alphabetical
sorting of groups of symbols. Fix all violations it reports
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Most of this deals with moving the libvirt-guests.sh script which
does all the work to /usr/libexec, so it can be shared by both
systemd and traditional init. Previously systemd depended on
the script being in /etc/init.d
Required to fix https://bugzilla.redhat.com/show_bug.cgi?id=789747
When using vnc gaphics over a unix socket, virt-aa-helper needs to provide
access for the qemu domain to access the sockfile.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
When a qemu domain is backed by huge pages, apparmor needs to grant the domain
rw access to files under the hugetlbfs mount point. Add a hook, called in
qemu_process.c, which ends up adding the read-write access through
virt-aa-helper. Qemu will be creating a randomly named file under the
mountpoint and unlinking it as soon as it has mmap()d it, therefore we
cannot predict the full pathname, but for the same reason it is generally
safe to provide access to $path/**.
Signed-off-by: Serge Hallyn <serge.hallyn@ubuntu.com>
I noticed that on Fedora 18, xlstproc decides to regenerate
HACKING with additional whitespace. I haven't figured out why
that is happening (although fixing it would probably be a task
for xlstproc), but in the process of investigating, I noticed
that 'make HACKING' was completely silent, for no good reason.
* Makefile.am (gen-ChangeLog, gen-AUTHORS, NEWS)
($(top_srcdir)/HACKING): Mention which files we are generating.
This patch exports qemuMigrationIsAllowed and adds a new parameter to it
to denote if it's a remote migration or a local migration. Local
migrations are used in snapshots and saving of the machine state and
have fewer restrictions. This patch also adjusts callers of the function
and tweaks some error messages to be more universal.
Currently there is no way to detect it via QMP and requesting "-sandbox
off" works correctly even if it was compiled out, so this will work
unless someone both requests the sandbox in qemu.conf and builds QEMU
without the support for it.
Interfaces keeps a class_id, which is an ID from which bridge
part of QoS settings is derived. We need to store class_id
in domain status file, so we can later pass it to
virNetDevBandwidthUnplug.
Currently, we are only keeping a inactive XML configuration
in status dir. This is no longer enough as we need to keep
this class_id attribute so we don't overwrite old entries
when the daemon restarts. However, since there has already
been release which has just <network/> as root element,
and we want to keep things compatible, detect that loaded
status file is older one, and don't scream about it.
Network should be notified if we plug in or unplug an
interface, so it can perform some action, e.g. set/unset
network part of QoS. However, we are doing this in very
early stage, so iface->ifname isn't filled in yet. So
whenever we want to report an error, we must use a different
identifier, e.g. the MAC address.
This will be used whenever a NIC with guaranteed throughput is to
be plugged into a bridge. It will adjust the average throughput of
non guaranteed NICs (classid 1:2) to meet new requirements.
These set bridge part of QoS when bringing domain's interface up.
Long story short, if there's a 'floor' set, a new QoS class is created.
ClassID MUST be unique within the bridge and should be kept for
unplug phase.
These classes can borrow unused bandwidth. Basically,
only egress qdsics can have classes, therefore we can
do this kind of traffic shaping only on host's outgoing,
that is domain's incoming traffic.
This is however supported only on domain interfaces with
type='network'. Moreover, target network needs to have at least
inbound QoS set. This is required by hierarchical traffic shaping.
From now on, the required attribute for <inbound/> is either 'average'
(old) or 'floor' (new). This new attribute can be used just for
interfaces type of network (<interface type='network'/>) currently.
Stochastic Fairness Queuing (SFQ) is queuing discipline
(qdisc) which doesn't really shape any traffic but 'just'
re-arrange packets in sending buffer so no stream starve.
The goal is to ensure fairness. There is basically only one
configuration parameter (perturb) which is set to advised
value of 10.
Network adapters of type 'routed' is a special case. Other adapters
have 'network' parameter in prlctl's output instead.
Routed network adapters should be connected to 'routed' network
from libvirt's view.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Historically if traffic from the adapter is routed to LAN without
NAT, it isn't connected to any virtual networks, but has a 'type'
instead. Sinse libvirt has special virtual network type for such case,
let's add pseudo network 'routed' to fit libvirt's API well.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Parallels Cloud Server uses virtual networks model for network
configuration. It uses own tools for virtual network management.
So add network driver, which will be responsible for listing
virtual networks and performing different operations on them
(in consequent patched).
This patch only allows listing virtual network names, without
any parameters like DHCP server settings.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Allow changing network interfaces in domain configuration.
ifname is used as iterface identifier: if there is interface
with some ifname in old config and there are no interfaces with
such name in the new config - issue prlctl command to delete
the network interface. And vice versa - if interface with
some ifname exists only in new config - issue prlctl command
to create it.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Parse network interfaces info from prlctl output.
Parallels Cloud Server uses virtual networks model for
network configuration: You can add network adapter to
VM and connect it to some predefined virtual network.
Fill type, mac, network name and linkstate fields of
virDomainNetDef structure.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
When the disk snapshot part of an external system checkpoint fails the
memory image is retained. This patch adds code to remove the image in
such case.
In case the snapshot code isn't able to restart CPUs after an external
checkpoint we would leak a copy of the domains XML definition. This
patch fixes the cleanup path.
False positive, but it breaks the build with gcc-4.6.3.
qemu/qemu_migration.c:2931:37: error: 'offline' may be used
uninitialized in this function [-Werror=uninitialized]
qemu/qemu_migration.c:2887:10: note: 'offline' was declared here
This patch changes how parameters are passed to dnsmasq. Instead of
being on the command line, the parameters are put into a file (one
parameter per line) and a commandline --conf-file= specifies the
location of the file. The file is located in the same directory as
the leases file.
Putting the dnsmasq parameters into a configuration file
allows them to be examined and more easily understood than
examining the command lines displayed by "ps ax". This is
especially true when a number of networks have been started.
When the use of dnsmasq was originally done, the required command line
was simple, but it has gotten more complicated over time and will
likely become even more complicated in the future.
Note: The test conf files have all been renamed .conf instead of
.argv, and tests/networkxml2xmlargvdata was moved to
tests/networkxml2xmlconfdata.
The DHCPv6 support includes IPV6 dhcp-range and dhcp-host for one
IPv6 subnetwork on one interface. This support will only work
if dnsmasq version >= 2.64; otherwise an error occurs if
dhcp-range or dhcp-host is specified for an IPv6 address.
Essentially, this change provides the same DHCP support for IPv6
that has been available for IPv4.
With dnsmasq >= 2.64, support for the RA service is also now provided
by dnsmasq (radvd is no longer used/started). (Although at least one
version of dnsmasq prior to 2.64 "supported" IPv6 Router
Advertisement, there were bugs (fixed in 2.64) that rendered it
unusable.)
Documentation and the network schema has been updated
to reflect the new support.
virNetworkDefUpdateForward requires separate functions to parse and
clear a virNetworkForwardDef by itself, but they were previously just
inlined in the virNetworkDef parse and free functions. This patch
makes them into separate functions.
The attributes of a <network> element's <forward> element were
previously stored directly in the virNetworkDef object, but
virNetworkUpdateForward() needs to operate on a <forward> in
isolation, so this patchs pulls out all those attributes into a
separate virNetworkForwardDef struct (and shortens their names
appropriately). This new object is contained in the virNetworkDef, not
pointed to by it, so there is no extra memory management.
This patch makes no functional changes, it only changes, e.g.,
"nForwardIfs" to "forward.nifs".