All but VIR_CPU_MODE_HOST_MODEL were moved. 'host_model' mode
has nuances that forbid the verification to be moved to parse
time.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We have a lot of "if (usingVirtio)" checks being done while
constructing the NIC command line. Let's put all of them in
a single "if".
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A few tweaks were made during the move:
- the error messages were changed to mention 'sata controller'
instead of 'ide controller';
- a check for address type 'drive' was added like it is done
with other bus types. The error message of qemuxml2argdata was
updated to reflect that now, instead of erroring it out from the
common code in virDomainDiskDefValidate(), we're failing earlier
with a different error message.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In fee8a61d29 a new attribute to <memballoon/> was introduced:
free-page-reporting. We don't really like hyphens in attribute
names. Use camelCase instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
These variables seem to be left over from a previous refactoring and
they don't add anything to the code.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
...if a machine memory-backend using shared memory is configured for
the guest. This is especially important for QEMU machine types that
don't have NUMA but virtiofs support.
An example snippet:
<domain type='kvm'>
<name>test</name>
<memory unit='KiB'>2097152</memory>
<memoryBacking>
<access mode='shared'/>
</memoryBacking>
<devices>
<filesystem type='mount' accessmode='passthrough'>
<driver type='virtiofs'/>
<source dir='/tmp/test'/>
<target dir='coffee'/>
</filesystem>
...
</devices>
...
</domain>
and the corresponding QEMU command line:
/usr/bin/qemu-system-s390x \
-machine s390-ccw-virtio-5.2,memory-backend=s390.ram \
-m 2048 \
-object
memory-backend-file,id=s390.ram,mem-path=/var/lib/libvirt/qemu/ram/46-test/s390.ram,share=yes,size=2147483648 \
...
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch enables the free-page-reporting in qemu.
Signed-off-by: Nico Pache <npache@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch will introduce the free-page-reporting feature capabilities
that are in qemu 5.1
Signed-off-by: Nico Pache <npache@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
By default, pfifo_fast queueing discipline (qdisc) is set on
newly created interfaces (including TAPs). This qdisc has three
queues and packets that want to be sent through given NIC are
placed into one of the queues based on TOS field. Queues are then
emptied based on their priority allowing interactive sessions
stay interactive whilst something else is downloading a large
file.
Obviously, this means that kernel has to be involved and some
locking has to happen (when placing packets into queues). If
virtualization is taken into account then the above algorithm
happens twice - once in the guest and the second time in the
host.
This is arguably not optimal as it burns host CPU cycles
needlessly. Guest already made it choice and sent packets in the
order it wants.
To resolve this, Linux kernel offers 'noqueue' qdisc which can be
applied on virtual interfaces and in fact for 'lo' it is by
default:
lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue
Set it for other TAP devices we create for domains too. With this
change I was able to squeeze 1Mbps more from a macvtap attached
to a guest and to my 1Gbps LAN (as measured by iperf3).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1329644
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
If storage migration is requested, and the destination storage does
not exist on the remote host, qemu's migration support will call
into the libvirt storage driver to precreate the destination storage.
The storage driver virConnectPtr is opened too early though, adding
an unnecessary dependency on the storage driver for several cases
that don't require it. This currently requires kubevirt to install
the storage driver even though they aren't actually using it.
Push the virGetConnectStorage calls to right before the cases they are
actually needed.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
As preparation for g_autoptr() we need to change the function to take
only virCgroupPtr.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
"cpu_map.xml" was moved to a directory "cpu_map" and split up into
several files.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The original descirption for *_tls_x509_verify is a little misleading
by saying that "Enabling this option will reject any client who does
not have a ca-cert.pem certificate".
Signed-off-by: Fangge Jin <fjin@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In 88957116c9 I've switched to -machine memory-backend=ID and
-object memory-backend-* because QEMU is obsoleting -mem-path
and -mem-prealloc. However, what I did not foresee was that using
-machine memory-backend in combination with -numa is not allowed
in QEMU. This was reported upstream and fortunately not released
yet.
The problem is that if domain has NUMA nodes then we will
generate memory-backend-* objects for NUMA nodes (because if QEMU
is new enough to expose default RAM ID it also supports -numa
memdev=) and adding non-NUMA memory backend is wrong.
Reported-by: Masayoshi Mizuma <msys.mizuma@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
For readability, and to ensure we do allocation when
returning 0.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
We only care about the first part of the 'ifname' string,
splitting it is overkill.
Instead, just replace the ':' with a '\0' in a copy of the string.
This reduces the count of the varaibles containing some form
of the interface name to two.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
The error check for ValueObjectGet("return") is redundant,
qemuAgentCommand already checked for us that the reply contains
a "return" object.
It does not guarantee, that it is an array.
Use virJSONValueObjectGetArray that combines getting the object
with checking for its type and return the more helpful of
the two error messages.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Convert one interface from the "return" array returned by
"guest-network-get-interfaces" to virDomainInterface.
Due to the functionality of squashing interface aliases together,
this is not a pure function - it either:
* Adds the interface to ifaces_ret, incrementing ifaces_count
and adds a pointer to it into the ifaces_store hash table.
* Adds the additional IP addresses from the interface alias
to the existing interface entry, found through the hash table.
This does not increment ifaces_count or extend the array.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
We have a local 'iface' variable that contains the same value
eventually. Initialize it early instead of indexing two more
times.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
We're passing 'ifaces_count' to virHashCreate as the initial
hash table size just after we've initialized it to zero.
This translates to a default of 256 inside virHashCreateFull.
Instead of this obfuscation, use virHashNew (default of 32),
to make it obvious we don't care about the initial hash size.
Also remove the error handling, since neither of the functions
return any errors after switching to g_new0.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
This lets us conveniently reduce its scope to the outer loop.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
qemuAgentGetInterfaceOneAddress returns exactly one address
for every iteration of the loop (and we error out if not).
Instead of expanding the addrs by one on every iteration,
do it upfront since we know how many times the loop will
execute.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
For both 'ip_addr_arr' and 'ret_array', we:
1) already checked that they are arrays
2) only iterate up to the array size
Remove the duplicate checks.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
A function that takes one entry from the "ip-addresses" array
returned by "guest-network-get-interfaces" and converts it
into virDomainIPAddress.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
virJSONValueObjectGetArray returns NULL if the object with
the supplied key is not an array.
Calling virJSONValueIsArray right after is redundant.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
This adds a new value to virConnectCompareCPUFlags,
"VIR_CONNECT_CPU_VALIDATE_XML", that governs XML document validation in
virCPUDefParseXML.
In src/conf/cpu_conf.c, include configmake.h for PKGDATADIR and
virfile.h for virFileFindResource.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
I left in a 'return' or 'goto cleanup' in a few places
where I did the conversion manually.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Move them to separate conditions to reduce churn
in following patches.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Previous refactors allow us to plainly replace all VIR_FREE by g_free to
finish the modernization of the file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Restructure the control-flow a bit using an temporary variable to avoid
the need to use VIR_FREE.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use modern allocators, automatic memory feeing, and decrease the scope
of some variables to remove the 'cleanup' label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use modern allocators, automatic memory feeing, and decrease the scope
of some variables to remove the 'error' and 'cleanup' labels.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use modern allocators, automatic memory feeing, and decrease the scope
of some variables to remove the 'error' label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory freeing to get rid of the 'error' label. Since the
'tmp' variable was used only in one instance, rename it appropriately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use modern memory handling approach to simplify the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use modern memory handling approach to simplify the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Register the the cleanup functions for 'qemuMigrationCookieGraphics',
'qemuMigrationCookieNetwork', 'qemuMigrationCookieNBD', and
'qemuMigrationCookieCaps'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Switch to automatic memory cleaning, use g_new0 for allocation and get
rid of the 'error' label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the code into 'qemuMigrationCookieNBDXMLFormat' and use modern XML
formatting code patterns.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use 'virXMLFormatElement' both for formating the whole <network> element
but also for formatting the <interface> subelements. This alows to
remove the crazy logic which was determining which element was already
formatted.
Additional simplification is achieved by switching to skipping the loop
using 'continue' rather than putting everything in a giant block.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Switch to the two buffer approach to simplify the logic for terminating
the element.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now it only returns -1 so we can do that directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most of our functions report errors so there's no need to mention it
here again.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Make sure that 'virXPathNodeSet' returns '1' as the only expected value
rather than relying on the fact that the previous check for the number
of elements ensures success of the subsequent call.
The error message no longer mentions the number of <domain> elements in
the cookie, but this is a very unlikely internal error anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Don't reuse 'tmp' over and over, but switch to single use automaticaly
freed variables instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the code into 'qemuMigrationCookieXMLParseMandatoryFeatures' to
simplify 'qemuMigrationCookieXMLParse'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After recent refactors the function can be refactored to remove the
'cleanup' label by using autoptr for the 'map' variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are only 3 places using the function. Two can use virBitmapNewCopy
directly. In case of the qemu capabilities code we need to free the old
bitmap first.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of saving the interesting pieces of each existing NetDef,
clearing it, and then copying back the saved pieces after setting the
type to ethernet, just create a new NetDef, copy in the interesting
bits, and replace the old one. (The end game is to eliminate
virDomainNetDefClear() completely, since this is the only real use)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
So far, Libvirt configures memory-backend-* for memory hotplug,
possibly NUMA nodes and in a few other cases. This patch
switches to constructing the memory-backend-* command line for
all cases. To keep ability to migrate guests a little hack is
used: the ID of the object is set to the one that QEMU uses
internally anyways. These IDs are stable (first started to appear
somewhere around v0.13.0-rc0~96) and can't change.
In fact, this patch does exactly what QEMU does internally. The
reason for moving the logic into Libvirt is that QEMU wants to
deprecate the old style of specifying memory.
So far, only x84_64 test cases are changed, because tests for
other architectures use older capabilities, which still lack the
QEMU_CAPS_MACHINE_MEMORY_BACKEND capability and they don't report
the RAM ID.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1836043
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The machine structure has another (optional) attribute:
default-ram-id, which specifies the alias of the default RAM
object. While the alias is private, it can never change in order
to not break migration. QEMU uses the alias when allocating
regular, not NUMA memory. In order to switch to new command line
and maintain migration, save this ID.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The objects at @def and @mem pointers are only read and not
written. Make the arguments const to make that explicit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
If a domain was using hugepages through memory-backend-file or
via -mem-path, we would turn prealloc on. But we are not doing
that for memory-backend-memfd. Fix this, because we need QEMU to
fully allocate hugepages.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
If user specifies immediate memory allocation in the domain XML,
they want QEMU to fully allocate its memory. And if the memory
was allocated using plain '-m' then we would honour it. But, if a
memory backend is used, then we don't set the prealloc attribute
of the backend.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All three memory backends (-file, -ram and -memfd) have .prealloc
attribute. Since we are setting it only for -file, the
corresponding code lives only under if() that handles that
specific backend. But in near future we will want to set the
attribute for other backends too. Therefore, move the
corresponding code outside of the if().
This causes some .argv files to be changed, but the only change
happening there is move of the attribute (best viewed with:
'git show --color-words=.').
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This originally started as bug 1595525 in which namespaces and
libusb used in QEMU were not playing nicely with each other. The
problem was that libusb built a cache of USB devices it saw
(which was a very limited set because of the namespace) and then
expected to receive udev events to keep the cache in sync. But
those udev events didn't come because on hotplug when we mknod()
devices in the namespace no udev event is generated. And what is
worse - libusb failed to open a device that wasn't in the cache.
Without going further into what the problem was, libusb added a
new API for opening USB devices that avoids using cache which
QEMU incorporated and exposes under "hostdevice" attribute.
What is even nicer is that QEMU uses qemu_open() for path
provided in the attribute and thus FD passing could be used.
Except qemu_open() expects so called FD sets instead of `getfd'
and these are not implemented in libvirt, yet.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1877218
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability tracks whether "usb-host" device has "hostdevice"
attribute. This attribute allows us to specify full path to the
USB device ("/dev/bus/usb/$bus/$dev") but more importantly, since
QEMU uses qemu_open() for this attribute it allows us to pass
pre-opened FD and have QEMU not bother with opening the file at
all.
The attribute was added in v5.1.0-rc0~71^2~1 QEMU commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use a more descriptive name and move the verb to the end so that the
functions conform with the naming policy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There is just one caller, inline the code. This also optimizes the code
as we no longer have to calculate length of the output XML as it's
actually stored in the buffer struct.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need an empty cookie, so use qemuMigrationCookieNew instead of
qemuMigrationEatCookie with NULL/0 arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow direct use rather than going through qemuMigrationEatCookie with
NULL/0 arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move around some code so that we can get rid of the 'cleanup:' label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use a more descriptive name and move the verb to the end so that the
functions conform with the naming policy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract the validation of transient disk option. We support transient
disks in qemu under the following conditions:
- -blockdev is used
- the disk source is a local file
- the disk type is 'disk'
- the disk is not readonly
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
Add overlays after the VM starts before we start executing guest code.
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
Remove the overlay if the disk was <transient/>. Note that even if we'd
forbid unplug of such a disk through the API, the disk can still be
ejected from the guest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
Block migration when transient disk option is enabled to simplify the
handling of the overlay files.
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
For now we disable disk hotplug of transient disk as it requires
creating an overlay prior to adding the frontend.
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
For now we disallow blockjobs with transient disks to avoid dealing with
obsoleted overlays.
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
To implement <transient/> disks we'll need to install an overlay on top
of the original disk image which will be discarded after the VM is
turned off. This was initially implemented by qemu but libvirt never
picked up this option as the overlays were created by qemu without
libvirt involvment which didn't work with SELinux.
With blockdev the qemu feature became unsupported so we need to do this
via the snapshot code anyways.
The helpers introduced in this patch prepare a fake snapshot disk
definition for a disk which is configured as <transient/> and use it to
create a snapshot (without actually modifying metadata or persistent
def).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
Later patches will implement support for <transient/> disks in libvirt
by installing an overlay on top of the configured image. This will
require cleanup after the VM will be stopped so that the state is
correctly discarded.
Since the overlay will be installed only during the startup phase of the
VM we need to ensure that qemuProcessStop doesn't delete the original
file on some previous failure. This is solved by adding
'inhibitDiskTransientDelete' VM private data member which is set prior
to any startup step and will be cleared once transient disk overlays are
established.
Based on that we can then delete the overlays for any <transient/> disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
CVE-2020-25637
Add a requirement for domain:write if source is set to
VIR_DOMAIN_INTERFACE_ADDRESSES_SRC_AGENT.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
'ndd' tracks the actual number of snapshot disks filled into the
structure and is incremented by the functions filling the context, thus
it must not be set when initializing the context.
Fixes: 8c2ecdf131
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The container itself needs to be freed too.
Fixes: 8c2ecdf131
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make it obvious that the snapshot is prepared for the active external
snapshot case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract the code which invokes the monitor and finalizes the snapshot
into a separate function for easier reuse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a container struct which holds all data needed to create and clean
up after a (for now external) snapshot. This will aggregate all the
'qemuSnapshotDiskDataPtr' the 'actions' of a transaction QMP command and
everything needed for cleanup at any given point.
This aggregation allows to simplify the arguments of the functions which
prepare the snapshot data and additionally will simplify the code
necessary for creating overlays on top of <transient/> disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Be more specific about the role of the function. It's creating the disk
portion of an external active snapshot.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After virDomainSnapshotAlignDisks is called the definitions of disks in
the snapshot definition and in the domain definition are in the same
order so they can be addressed using the same index.
This frees up 'idx' to be removed later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add an abort() on the class/object allocation failures so that
virStorageSourceNew() always returns a virStorageSource and remove
checks from all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Before:
$ uname -m
s390x
$ cat passthrough-cpu.xml
<cpu check="none" mode="host-passthrough" />
$ virsh hypervisor-cpu-compare passthrough-cpu.xml
error: Failed to compare hypervisor CPU with passthrough-cpu.xml
error: internal error: unable to execute QEMU command 'query-cpu-model-comp
arison': Invalid parameter type for 'modelb.name', expected: string
After:
$ virsh hypervisor-cpu-compare passthrough-cpu.xml
CPU described in passthrough-cpu.xml is identical to the CPU provided by hy
pervisor on the host
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We'll use the auto-alignment function during parse time, in
domain_conf.c. Let's move the function to that file, renaming
it to virDomainNVDimmAlignSizePseries(). This will also make it
clearer that, although QEMU is the only driver that currently
supports it, pSeries NVDIMM restrictions aren't tied to QEMU.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
If the mapping is not present, we should not try to
access its elements.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 8b5b80f4c5
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In [1], changes were made to remove the existing auto-alignment
for pSeries NVDIMM devices. That design promotes strange situations
where the NVDIMM size reported in the domain XML is different
from what QEMU is actually using. We removed the auto-alignment
and relied on standard size validation.
However, this goes against Libvirt design philosophy of not
tampering with existing guest behavior, as pointed out by Daniel
in [2]. Since we can't know for sure whether there are guests that
are relying on the auto-alignment feature to work, the changes
made in [1] are a direct violation of this rule.
This patch reverts [1] entirely, re-enabling auto-alignment for
pSeries NVDIMM as it was before. Changes will be made to ease
the limitations of this design without hurting existing
guests.
This reverts the following commits:
- commit 2d93cbdea9
Revert "formatdomain.html.in: mention pSeries NVDIMM 'align down' mechanic"
- commit 0ee56369c8
qemu_domain.c: change qemuDomainMemoryDeviceAlignSize() return type
- commit 07de813924
qemu_domain.c: do not auto-align ppc64 NVDIMMs
- commit 0ccceaa57c
qemu_validate.c: add pSeries NVDIMM size alignment validation
- commit 4fa2202d88
qemu_domain.c: make qemuDomainGetMemorySizeAlignment() public
[1] https://www.redhat.com/archives/libvir-list/2020-July/msg02010.html
[2] https://www.redhat.com/archives/libvir-list/2020-September/msg00572.html
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduce 'isa' controller type. In domain XML it looks this way:
...
<controller type='isa' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01'
function='0x0'/>
</controller>
...
Currently, this is needed for the bhyve driver to allow choosing a
specific PCI address for that. In bhyve, this controller is used to
attach serial ports and a boot ROM.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch is just revert of [1]. Actually we should NOT pass
QEMU_ASYNC_JOB_NONE as that patch suggests while we are in async job in order
to acquire nested jobs correctly. The patch tries to fix issues introduced by
another patch [2] where jobs are mistakenly cleared out in qemuProcessStop.
Later patch [3] fixed the issue introduced by patch [2]. Now we need to revert
[1] as well as we now still have same concurrency crash issues as [3] described
but for the force revert.
[1] 0c4408c83: qemu: Don't use asyncJob after stop during snapshot revert
[2] 888aa4b6b: qemuDomainObjPrivateDataClear: Don't leak @migParams
[3] d75f865fb: qemu: fix concurrency crash bug in snapshot revert
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'readonly' hostdev property is stored separately from the
virStorageSource as some hostdevs are not described by a virStorage
source. We need to propagate the flag to the virStorage source also for
iSCSI backends as it's used to generate the backend properties.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1868856
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We've put the aliases into the backup job definition after the status
XML was already written so they didn't appear in the on-disk state.
Move the code putting them into the private definition earlier, so that
the status XML update done by saving blockjobs already writes them out.
Also add a note notifying that the block job status update writes the
status XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1870488
Fixes: 423576679a
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 423576679a implementing TLS forgot to remove the comment.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU's blockdev nodenames which are used to back SCSI/iSCSI hostdevs are
limited to 32 characters. If a user passes a very long user alias as
name of the host device it's easy to end up with a too-long nodename.
To prevent this from happening don't base the nodename on the possibly
user-specified alias but on the normal sequential node name generator.
We then store the name in the status XML for further use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The secret object is used to pass data to the backend so it's better
fitting to base the secret object name on the SCSI host device backend
name.
Since we store the object alias in the status XML this modification is
safe in regards to existing guests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allocate the nodename in the setup function rather than in the command
line generator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is no longer used once we setup per-hostdev data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically we've prepared secrets for all objects in one place. This
doesn't make much sense and it's semantically more appealing to prepare
everything for a single device type in one place.
Move the setup of the (iSCSI|SCSI) hostdev secrets into a new function
which will be used to setup other things as well in the future.
This is a similar approach we do for disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This was a hack when we were locally regenerating the nodename so that
it's not leaked. Now that we use proper virStorageSource with
persistence it's no longer required.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify the attach/detach data generators to actually use the
virStorageSourceStructure embedded in the SCSI config data rather than
creating an ad-hoc internal one.
The modification will allow us to properly store the nodename used for
the backend in the status XML rather than re-generating it all the
time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For upgrade reasons so that we can modify the used nodename we must
generate the old version for all status XMLs which don't have it stored
explicitly.
The change will be required as using the user-provided alias may result
in too-long nodenames which will be rejected by qemu.
Add code which fills in the appropriate old value and add test cases to
validate that it's added and also that existing nodenames are not
overwritten.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After we started copying the privateData pointer in
qemuDomainObjRestoreJob, we should also free them
once we're done with them.
Register the clear function and use g_auto.
Also add a check for job->cb to qemuDomainObjClearJob,
to prevent freeing an uninitialized job.
https://bugzilla.redhat.com/show_bug.cgi?id=1878450
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: aca37c3fb2
While we set up perf events for a shutoff domain and check the settings,
All of perf events are reported as 'disabled', unless we add --config,
This is redundant for a shutoff domain.
# virsh domstate $GUEST
shut off
# virsh perf --domain $GUEST
cmt : disabled
mbmt : disabled
mbml : disabled
......
# virsh perf --domain $GUEST --enable mbmt
mbmt : enabled
# virsh perf --domain $GUEST
cmt : disabled
mbmt : disabled
mbml : disabled
......
Use virDomainObjGetOneDefState instead of virDomainObjGetOneDef to fix
the issue. After patch, The perf event status of a shutoff domain is
reported correctly:
# virsh domstate $GUEST
shut off
# virsh perf --domain $GUEST
cmt : disabled
mbmt : disabled
mbml : disabled
......
# virsh perf --domain $GUEST --enable mbmt
mbmt : enabled
# virsh perf --domain $GUEST
cmt : disabled
mbmt : enabled
mbml : disabled
......
Signed-off-by: Lin Ma <lma@suse.de>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
It requires a guest agent configured and running in the domain's guest
OS, So check qemu agent during qemuDomainPMSuspendForDuration().
Signed-off-by: Lin Ma <lma@suse.de>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When the guest agent isn't running, we still report success on a PM
suspend action even though we logged an error correctly, this is because
we poisoned the 'ret' value a few lines above.
Fixes: a663a86081
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In 8e1804f9f6 I've tried to fix the following use case: domain
is started with path to UEFI only and relies on libvirt to figure
out corresponding NVRAM template to create a per-domain copy
from. The fix consisted of having a check tailored exactly for
this use case and if it's hit then using FW autoselection to
figure it out. Unfortunately, the NVRAM template is not saved in
the inactive XML (well, the domain might be transient anyway).
Then, as a part of that check we see whether the per-domain copy
doesn't exist already and if it does then no template is looked
up hence no template will appear in the live XML.
This works, until the domain is migrated. At the destination, the
per-domain copy will not exist so we need to know the template to
create the per-domain copy from. But we don't even get to the
check because we are not starting a fresh new domain and thus the
qemuFirmwareFillDomain() function quits early.
The solution is to switch order of these two checks. That is
evaluate the check for the old style before checking flags.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1852910
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
When starting a domain, qemuProcessLaunch() iterates over all
VIR_PERF_EVENT_* values and (possibly) enables them. While there
is nothing wrong with the code, the for loop where it's done makes
it harder to jump onto next block of code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Propagate the cluster size from the original image as the user might
have configured a custom cluster size for performance reasons. Propagate
the cluster size of a qcow2 image to the new overlay or copy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
'blockdev-create' allows us to create the image with a custom cluster
size if we wish to. Wire it up for 'qcow2'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Configuring the cluster size of an image may have performance
implications. This patch allows us to detect cluster size for existing
images so that we will be able to propagate it to new images which are
based on existing images e.g. during snapshots/block-copy/etc.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When building and populating domain NS a couple of functions are
called that append paths to a string list. This string list is
then inspected, one item at the time by
qemuNamespacePrepareOneItem() which gathers all the info for
given path (stat buffer, possible link target, ACLs, SELinux
label) using qemuNamespaceMknodItemInit(). If the path needs to
be created in the domain's private /dev then it's added onto this
qemuNamespaceMknodData list which is freed later in the process.
But, if the path does not need to be created in the domain's
private /dev, then the memory allocated by
qemuNamespaceMknodItemInit() is not freed anywhere leading to a
leak.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is just a clean-up of commit 3791f29b08 using the new parameter of
virProcessSetAffinity() introduced in commit 9514e24984 so that there is
no error reported in the logs.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In the past we had to declare @cfg and then explicitly unref it.
But now, with glib we can use g_autoptr() which will do the unref
automatically and thus is more bulletproof.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
In the qemuInterfacePrepareSlirp() function, the qemu driver
config is obtained (via virQEMUDriverGetConfig()), but it is
never unrefed leading to mangled refcounter.
Fixes: 9145b3f1cc
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
On shutdown we just stop accepting new jobs for worker thread so that on
shutdown wait we can exit worker thread faster. Yes we basically stop
processing of events for VMs but we are going to do so anyway in case of daemon
shutdown.
At the same time synchronous event processing that some API calls may require
are still possible as per VM event loop is still running and we don't need
worker thread for synchronous event processing.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We are dropping the only reference here so that the event loop thread
is going to be exited synchronously. In order to avoid deadlocks we
need to unlock the VM so that any handler being called can finish
execution and thus even loop thread be finished too.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This hunk was introduced in [1] in order to avoid loosing
events from monitor on stopping qemu process. But as explained
in [2] on destroy we won't get neither EOF nor any other
events as monitor is just closed. In case of crash/shutdown
we won't get any more events as well and qemuDomainObjStopWorker
will be called by qemuProcessStop eventually. Thus let's
remove qemuDomainObjStopWorker from qemuProcessHandleMonitorEOF
as it is not useful anymore.
[1] e6afacb0f: qemu: start/stop an event loop thread for domains
[2] d2954c072: qemu: ensure domain event thread is always stopped
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This allows:
a) migration without access to network
b) complete control of the migration stream
c) easy migration between containerised libvirt daemons on the same host
Resolves: https://bugzilla.redhat.com/1638889
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Consider a host with 8 CPUs. There are the following possible scenarios
1. Bare metal; libvirtd has affinity of 8 CPUs; QEMU should get 8 CPUs
2. Bare metal; libvirtd has affinity of 2 CPUs; QEMU should get 8 CPUs
3. Container has affinity of 8 CPUs; libvirtd has affinity of 8 CPus;
QEMU should get 8 CPUs
4. Container has affinity of 8 CPUs; libvirtd has affinity of 2 CPus;
QEMU should get 8 CPUs
5. Container has affinity of 4 CPUs; libvirtd has affinity of 4 CPus;
QEMU should get 4 CPUs
6. Container has affinity of 4 CPUs; libvirtd has affinity of 2 CPus;
QEMU should get 4 CPUs
Scenarios 1 & 2 always work unless systemd restricted libvirtd privs.
Scenario 3 works because libvirt checks current affinity first and
skips the sched_setaffinity call, avoiding the SYS_NICE issue
Scenario 4 works only if CAP_SYS_NICE is availalbe
Scenarios 5 & 6 works only if CAP_SYS_NICE is present *AND* the cgroups
cpuset is not set on the container.
If libvirt blindly ignores the sched_setaffinity failure, then scenarios
4, 5 and 6 should all work, but with caveat in case 4 and 6, that
QEMU will only get 2 CPUs instead of the possible 8 and 4 respectively.
This is still better than failing.
Therefore libvirt can blindly ignore the setaffinity failure, but *ONLY*
ignore it when there was no affinity specified in the XML config.
If user specified affinity explicitly, libvirt must report an error if
it can't be honoured.
Resolves: https://bugzilla.redhat.com/1819801
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Adds new typed param for migration and uses this as a UNIX socket path that
should be used for the NBD part of migration. And also adds virsh support.
Partially resolves: https://bugzilla.redhat.com/1638889
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Clean up the semantics by using one extra self-describing variable.
This also fixes the port allocation when the port is specified.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Instead of saving some data from a union up front and changing an overlayed
struct before using said data, let's just set the new values after they are
decided. This will increase the readability of future commit(s).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In 6.7.0 release I've changed how domain namespace is built and
populated. Previously it used to be done from a pre-exec hook
(ran in the forked off child, just before dropping all privileges
and exec()-ing QEMU), which not only meant we had to have two
different code paths for creating a node in domain's namespace
(one for this pre-exec hook, the other for hotplug ran from the
daemon), it also proved problematic because it was leaking FDs
into QEMU process.
To mitigate this problem, we've not only ditched libdevmapper
from the NS population process, I've also dropped the pre-exec
code and let the NS be populated from the daemon (using the
hotplug code). But, I was not careful when doing so, because the
pre-exec code was tolerant to files that doesn't exist, while
this new code isn't. For instance, the very first thing that is
done when the new NS is created is it's populated with
@defaultDeviceACL which contain files like /dev/null, /dev/zero,
/dev/random and /dev/kvm (and others). While the rest will
probably exist every time, /dev/kvm might not and thus the new
code I wrote has to be tolerant to that.
Of course, users can override the @defaultDeviceACL (by setting
cgroup_device_acl in qemu.conf) and remove /dev/kvm (which is
acceptable workaround), but we definitely want libvirt to work
out of the box even on hosts without KVM.
Fixes: 9048dc4e62
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since QEMU 1.5.3, the ib700 watchdog device has no options for address,
and not address in device tree:
$ /usr/libexec/qemu-kvm -version
QEMU emulator version 1.5.3 (qemu-kvm-1.5.3-175.el7), Copyright (c) 2003-2008 Fabrice Bellard
$ /usr/libexec/qemu-kvm -device ib700,\?
$ virsh qemu-monitor-command seabios --hmp info qtree|grep ib700 -A 2
dev: ib700, id "watchdog0"
dev: isa-serial, id "serial0"
index = 0
So only allow it to use none address.
Fixes: 8a54cc1d08
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1509908
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuAgentFSInfoToPublic() currently only sets the devAlias for PCI devices.
However, the QEMU guest agent could also provide the device name in the
"dev" field of the response for other devices instead (well, at least after
fixing another problem in the current QEMU guest agent...). So if creating
the devAlias from the PCI information failed, let's fall back to the name
provided by the guest agent. This helps to fix the empty "Target" fields
that occur when running "virsh domfsinfo" on s390x where CCW devices are
used for the guest instead of PCI devices.
Also add a proper debug message here in case we completely failed to set the
device alias, since this problem here was very hard to debug: The only two
error messages that I've seen were "Unable to get filesystem information"
and "Unable to encode message payload" - which only indicates that something
went wrong in the RPC call. No debug message indicated the real problem, so
I had to learn the hard way why the RPC call failed (it apparently does not
like devAlias left to be NULL) and where the real problem comes from.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1755075
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
libvirt currently silently allows <timer name="kvmclock"/> and some
other timer tags in the guest XML definition for timers that do not
exist on non-x86 systems. We should not silently ignore these tags
since the users might not get what they expected otherwise.
Note: The error is only generated if the timer is marked with
present="yes" - otherwise we would suddenly refuse XML definitions
that worked without problems before.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1754887
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, we are mixing: #if HAVE_BLAH with #if WITH_BLAH.
Things got way better with Pavel's work on meson, but apparently,
mixing these two lead to confusing and easy to miss bugs (see
31fb929eca for instance). While we were forced to use HAVE_
prefix with autotools, we are free to chose our own prefix with
meson and since WITH_ prefix appears to be more popular let's use
it everywhere.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Setting IFF_VNET_HDR for a tap device passes the whole packet to the
host, reducing emulation overhead and improving performance.
Libvirt bases its decision about applying IFF_VNET_HDR to the tap
interface on whether or not the model of the emulated network device
is virtio. Originally, virtio was the only model to support
IFF_VNET_HDR in QEMU; however, the e1000e & vmxnet3 adapters have also
supported it since their introductions - QEMU commit
786fd2b0f87 for vmxnet3, and QEMU commit 6f3fbe4ed0 for e1000e, so it
should be set for those models too.
Signed-off-by: Patrick Magauran <patmagauran.j@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Laine Stump <laine@redhat.com>
By default Xen only allows guests to write "known safe" values into PCI
configuration space, yet many devices require writes to other areas of
the configuration space in order to operate properly. To allow writing
any values Xen supports the 'permissive' setting, see xl.cfg(5) man page.
This change models Xen's permissive setting by adding a writeFiltering
attribute on the <source> element of a PCI hostdev. When writeFiltering
is set to 'no', the Xen permissive setting will be enabled and guests
will be able to write any values into the device's configuration space.
The permissive setting remains disabled in the absense of the
writeFiltering attribute, of if it is explicitly set to 'yes'.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a configuration option for specifying location of the qemu modules
directory, defaulting to /usr/lib64/qemu. Then use this location to
check for changes in the directory, indicating that a qemu module has
changed and capabilities need to be reprobed.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The list archives, people.redhat.com and bugzilla all support
https.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
When creating a standard tap device, if provided with an ifname that
contains "%d", rather than taking that literally as the name to use
for the new device, the kernel will instead use that string as a
template, and search for the lowest number that could be put in place
of %d and produce an otherwise unused and unique name for the new
device. For example, if there is no tap device name given in the XML,
libvirt will always send "vnet%d" as the device name, and the kernel
will create new devices named "vnet0", "vnet1", etc. If one of those
devices is deleted, creating a "hole" in the name list, the kernel
will always attempt to reuse the name in the hole first before using a
name with a higher number (i.e. it finds the lowest possible unused
number).
The problem with this, as described in the previous patch dealing with
macvtap device naming, is that it makes "immediate reuse" of a newly
freed tap device name *much* more common, and in the aftermath of
deleting a tap device, there is some other necessary cleanup of things
which are named based on the device name (nwfilter rules, bandwidth
rules, OVS switch ports, to name a few) that could end up stomping
over the top of the setup of a new device of the same name for a
different guest.
Since the kernel "create a name based on a template" functionality for
tap devices doesn't exist for macvtap, this patch for standard tap
devices is a bit different from the previous patch for macvtap - in
particular there was no previous "bitmap ID reservation system" or
overly-complex retry loop that needed to be removed. We simply find
and unused name, and pass that name on to the kernel instead of
"vnet%d".
This counter is also wrapped when either it gets to INT_MAX or if the
full name would overflow IFNAMSIZ-1 characters. In the case of
"vnet%d" and a 32 bit int, we would reach INT_MAX first, but possibly
someday someone will change the name from vnet to something else.
(NB: It is still possible for a user to provide their own
parameterized template name (e.g. "mytap%d") in the XML, and libvirt
will just pass that through to the kernel as it always has.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There have been some reports that, due to libvirt always trying to
assign the lowest numbered macvtap / tap device name possible, a new
guest would sometimes be started using the same tap device name as
previously used by another guest that is in the process of being
destroyed *as the new guest is starting.
In some cases this has led to, for example, the old guest's
qemuProcessStop() code deleting a port from an OVS switch that had
just been re-added by the new guest (because the port name is based on
only the device name using the port). Similar problems can happen (and
I believe have) with nwfilter rules and bandwidth rules (which are
both instantiated based on the name of the tap device).
A couple patches have been previously proposed to change the ordering
of startup and shutdown processing, or to put a mutex around
everything related to the tap/macvtap device name usage, but in the
end no matter what you do there will still be possible holes, because
the device could be deleted outside libvirt's control (for example,
regular tap devices are automatically deleted when the qemu process
terminates, and that isn't always initiated by libvirt but could
instead happen completely asynchronously - libvirt then has no control
over the ordering of shutdown operations, and no opportunity to
protect it with a mutex.)
But this only happens if a new device is created at the same time as
one is being deleted. We can effectively eliminate the chance of this
happening if we end the practice of always looking for the lowest
numbered available device name, and instead just keep an integer that
is incremented each time we need a new device name. At some point it
will need to wrap back around to 0 (in order to avoid the IFNAMSIZ 15
character limit if nothing else), and we can't guarantee that the new
name really will be the *least* recently used name, but "math"
suggests that it will be *much* less common that we'll try to re-use
the *most* recently used name.
This patch implements such a counter for macvtap/macvlan, replacing
the existing, and much more complicated, "ID reservation" system. The
counter is set according to whatever macvtap/macvlan devices are
already in use by guests when libvirtd is started, incremented each
time a new device name is needed, and wraps back to 0 when either
INT_MAX is reached, or when the resulting device name would be longer
than IFNAMSIZ-1 characters (which actually is what happens when the
template for the device name is "maccvtap%d"). The result is that no
macvtap name will be re-used until the host has created (and possibly
destroyed) 99,999,999 devices.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When editing a domain with hotplug enabled, I removed the only
NUMA node it had and got no error. I got the error later though,
when starting the domain. This is not as user friendly as it can
be. Move the validation call out from command line generator and
into domain validator (which is called prior to starting cmd line
generation anyway).
When doing this, I had to remove memory-hotplug-nonuma xml2xml
test case because there is no way the test case can succeed,
obviously.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Non-x86 archs does not have a 'microcode' version like x86. This is
covered already inside the function - just return 0 if no microcode
is found. Regardless of that, a read of /proc/cpuinfo is always made.
Each read will invoke the kernel to fill in the CPU details every time.
Now let's consider a non-x86 host, like a Power 9 server with 128 CPUs.
Each /proc/cpuinfo read will need to fetch data for each CPU and it
won't even matter because we know beforehand that PowerPC chips don't
have microcode information.
We can do better for non-x86 hosts by skipping this process entirely.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since the macro no longer includes the 'ignore_value'
statement, stop putting another empty statement after it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Many of our functions start with a DEBUG statement.
Move the statements after declarations to appease
our coding style.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Split those initializations that depend on a statement
above them.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use virJSONValueObjectCreate rather than creating the object
piece-by-piece and use new accessors for bitmap to simplify the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Introduce a new device element "<audio>" which allows
to map guest sound device specified using the "<sound>"
element to specific audio backend.
Example:
<sound model='ich7'>
<audio id='1'/>
</sound>
<audio id='1' type='oss'>
<input dev='/dev/dsp0'/>
<output dev='/dev/dsp0'/>
</audio>
This block maps to OSS audio backend on the host using
/dev/dsp0 device for both input (recording)
and output (playback).
OSS is the only backend supported so far.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add 'ich7' sound model. This is a preparation for sound support in
bhyve, as 'ich7' is the only model it supports.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Back when the original version of this chunk of code was added (commit
41b087198 in libvirt-0.8.1 in April 2010), we used virExecDaemonize()
to start the qemu process, and would continue on in the function
(which at that time was called qemudStartVMDaemon()) even if a -1 was
returned. So it was possible to get to this code with rv == -1 (it was
called "ret" in that version of the code).
In modern libvirt code, qemu is started with virCommandRun(); then we
call virPidFileReadPath(); those are the only two ways of setting "rv"
prior to this code being removed, and in either case if the new value
of rv < 0, then we immediately skip over the rest of the code to the
cleanup: label.
This means that the code being removed by this patch is
unreachable.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Even if namespaces are disabled, then due to a missing check at the
beginning of qemuDomainBuildNamespace(), the domain startup code
still tries to populate (nonexistent) domain's namespace.
Fixes: 8da362fe62
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
After the recent changes, this function is now always returning
zero. Turn it to 'void' to relieve callers from checking it.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We don't need the auto-alignment now that the user is handling
it by hand.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The existing auto-align behavior for pSeries has the idea to
alleviate user configuration of the NVDIMM size, given that the
alignment calculation is not trivial to do (256MiB alignment
of mem->size - mem->label_size value, a.k.a guest area). We
align mem->size down to avoid end of file problems.
The end result is not ideal though. We do not touch the domain
XML, meaning that the XML can report a NVDIMM size 255MiB smaller
than the actual size the guest is seeing. It also adds one more
thing to consider in case the guest is reporting less memory
than declared, since the auto-align is transparent to the
user.
Following Andrea's suggestion in [1], let's instead do an
size alignment validation. If the NVDIMM is unaligned, error out
and suggest a rounded up value. This can be bothersome to users,
but will bring consistency of NVDIMM size between the domain XML
and the guest.
This approach will force existing non-running pSeries guests to
readjust the NVDIMM value in their XMLs, if necessary. No changes
were made for x86 NVDIMM support.
[1] https://www.redhat.com/archives/libvir-list/2020-July/msg01471.html
Suggested-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Next patch will use it outside of qemu_domain.c.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function is not changing the domain definition, it's only
reading from it. The function is going to be used from another
function which already takes const virDomainDef. Make the @def
const to avoid typecasting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 4362068979 moved the function to
util/virqemu.c which is compiled also on win32 and geteuid()/getegid()
doesn't exist there.
Move it to qemu_domain.c which is compiled only when the qemu driver is
enabled. Originally I didn't want to put it here as qemu_domain.c is a
code dump for helper functions but this is the least invasive fix.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We've dumped all the snapshot helpers and related code into
qemu_driver.c. It accounted for ~10% of overal size of qemu_driver.c.
Separate the code to qemu_snapshot.c/h.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There's a lot of helper code related to the save image handling. Extract
it to qemu_saveimage.c/h.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the code to qemu_domain.c so that it can be reused in other parts
of the qemu driver. 'qemu_domain' was chosen as we check the domain
state after closing the wrapper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the code to qemu_domain.c so that it can be reused in other parts
of the qemu driver. 'qemu_domain' was chosen as the permissions are
based on the domain configuration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory allocation to simplify the code and remove the need
for a 'cleanup:' label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory allocation and move variables into correct scope to
simplify the code and remove the need for a 'cleanup:' label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory allocation and move variables into correct scope to
simplify the code and remove the need for a 'error:' label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory allocation and move variables into correct scope to
simplify the code and remove the need for a 'error:' label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function doesn't have an overly verbose cleanup section as there
isn't any error code path. Unify it with the rest of the functions which
will simplify adding a possible error path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both parsing and formatting of NBD migration jobs is QEMU specific and
since we're trying to create a hypervisor-agnostic module out of
qemu_domainjob.c, move the NBD XML handling bits to the qemu_domain
module instead. Additionally, move the respective NBD XML calls to
the 'parseJob'/'formatJob' callbacks of the
qemuDomainObjPrivateJobCallbacks structure.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Functions `qemuDomainRemoveInactiveJob` and
`qemuDomainRemoveInactiveJobLocked` had their declaration misplaced in
`qemu_domainjob` and were moved to `qemu_domain` where their definitions
reside.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Most of our augeas files are generated during meson setup into build
directory and we were running augeas tests only for these files.
However, we have some other augeas and config files that are not
modified during meson setup and they are only in source directories.
In order to run tests for these files we need to provide different path
to both source and build directories.
Reported-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In case qemuDumpToFd() returns zero followed by a VIR_CLOSE(fd) fail,
we'd jump to the "cleanup" label with "ret=0", potentially resulting in
an unexpected success return value.
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
GCC 10 complains about "well_formed_uri" may be used uninitialzed.
Even though it is a false positive, we can easily avoid it.
Avoiding
../src/qemu/qemu_migration.c: In function ‘qemuMigrationDstPrepareDirect’:
../src/qemu/qemu_migration.c:2920:16: error: ‘well_formed_uri’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
2920 | if (well_formed_uri) {
| ^
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
If we don't have cgroups available and user tries to update blkio
parameters for running VM it will crash.
It should have been protected by the virCgroupHasController() check but
it was never called if the API was executed without any flags.
We call virDomainObjGetDefs() which sets `def` and `persistentDef` based
on the flags and these two variables should be used to figure out if we
need to update LIVE, CONFIG or both states.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1808293
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Following the rationale from commit
<2020c6af8a8e4bb04acb629d089142be984484c8> we should do the same thing
for iothread info as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit <2020c6af8a8e4bb04acb629d089142be984484c8> fixed an issue with
QEMU driver by reporting offline CPUs as well. However, doing so it
introduced a regression into libxl and test drivers by completely
ignoring the passed `hostcpus` variable.
Move the virHostCPUGetAvailableCPUsBitmap() out of the helper into QEMU
driver so it will not affect other drivers which gets the number of host
CPUs differently.
This was uncovered by running libvirt-dbus test suite which counts on
the fact that test driver has hard-coded host definition and must not
depend on the host at all.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This is not expose in most historical versions of glibc, nor
non-glibc impls. We must use our wrapper API instead.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If a Ctrl-C arrives while we are in the middle of executing the
virDomainCreateXML call, we will have no "virDomainPtr" object
available, but QEMU may none the less be running.
This means we'll never try to stop the QEMU process before we
honour the Ctrl-C and exit.
To deal with this race we need to postpone quit of the event
loop if it is requested while in the middle of domain startup.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We should prevent inlining of symbols from the driver .so files that are
mocked, as well as those in the main libvirt.so
This isn't fixing any currently known problem, just trying to prevent
future issues.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The header log_manager.h doesn't use anything from log_protocol.h and
the only other place than logging using log_protocol.h is qemu_command.c
where we can include log_protocol.h directly to have enum value
VIR_LOG_MANAGER_PROTOCOL_DOMAIN_OPEN_LOG_FILE_TRUNCATE available.
Fixes race-condition compilation error with meson:
In file included from ../tests/qemuhotplugmock.c:21:
In file included from ../src/qemu/qemu_hotplug.h:25:
In file included from ../src/qemu/qemu_domain.h:42:
../src/logging/log_manager.h:25:10: fatal error: 'logging/log_protocol.h' file not found
^~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Reported-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can use qemuDomainSetupInput() to obtain the path that we
need to unlink() from within domain's namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can use qemuDomainSetupRNG() to obtain the path that we
need to unlink() from within domain's namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can use qemuDomainSetupChardev() to obtain the path that we
need to unlink() from within domain's namespace. Note, while
previously we unlinked only VIR_DOMAIN_CHR_TYPE_DEV chardevs,
with this change we unlink some other types too - exactly those
types we created when plugging the device in.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can use qemuDomainSetupMemory() to obtain the path that we
need to unlink() from within domain's namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In my attempt to deduplicate the code, we can use
qemuDomainSetupHostdev() to obtain the list of paths to unlink
and then pass it to qemuDomainNamespaceUnlinkPaths() to unlink
them in a single fork.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
So far, the only caller qemuDomainNamespaceUnlinkPath() will
always pass a single path to unlink, but similarly to
qemuDomainNamespaceMknodPaths() - there are a few callers that
would like to pass two or more files to unlink at once (held in a
string list). Make the @paths argument a string list then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Simirarly to qemuDomainAttachDeviceMknodHelper() which was
modified just a couple of commits ago, modify the unlink helper
which is called on device detach so that it can unlink multiple
files in one go instead of forking off for every single one of
them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanup, creating /dev nodes from pre-exec hook is
no longer needed and thus can be removed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain SEV into daemon's
namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain loader into daemon's
namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain RNGs into daemon's
namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain inputs into daemon's
namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain graphics (render node)
into daemon's namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain TPM into daemon's
namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain chardevs into daemon's
namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain memory (nvdimms) into
daemon's namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain hostdevs into daemon's
namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in one of previous commits, populating domain's
namespace from pre-exec() hook is dangerous. This commit moves
population of the namespace with domain disks into daemon's
namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As mentioned in previous commit, populating domain's namespace
from pre-exec() hook is dangerous. This commit moves population
of the namespace with basic /dev nodes (e.g. /dev/null, /dev/kvm,
etc.) into daemon's namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Okay, here is the deal. Currently, the way we build namespace is
very fragile. It is done from pre-exec hook when starting a
domain, after we mass closed all FDs and before we drop
privileges and exec() QEMU. This fact poses some limitations onto
the namespace build code, e.g. it has to make sure not to keep
any FD opened (not even through a library call), because it would
be leaked to QEMU. Also, it has to call only async signal safe
functions. These requirements are hard to meet - in fact as of my
commit v6.2.0-rc1~235 we are leaking a FD into QEMU by calling
libdevmapper functions.
To solve this issue and avoid similar problems in the future, we
should change our paradigm. We already have functions which can
populate domain's namespace with nodes from the daemon context.
If we use them to populate the namespace and keep only the bare
minimum in the pre-exec hook, we've mitigated the risk.
Therefore, the old qemuDomainBuildNamespace() is renamed to
qemuDomainUnshareNamespace() and new qemuDomainBuildNamespace()
function is introduced. So far, the new function is basically a
NOP and domain's namespace is still populated from the pre-exec
hook - next patches will fix it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The aim to make it look as close to
qemuDomainNamespaceSetupDisk() as possible. The latter will call
the former and this change makes that diff easier to read.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Every caller does the same - counts the number of items in a
string list they have, only to pass the number to
qemuDomainNamespaceMknodPaths(). This is needless - the function
can accept the string list and count the items itself.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While the previous commit prepared the helper function run in a
forked off helper (with corresponding struct), this commit
modifies the caller, which now create all files requested in a
single process and does not fork off for every single path.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
So far, when attaching a device needs two or more /dev nodes
created into a domain, we fork off and run the helper for every
node separately. For majority of devices this is okay, because
they need no or one node created anyway. But the idea is to use
this attach code to build the namespace when starting a domain,
in which case there will be way more nodes than one.
To achieve this, the recursive approach for handling symlinks has
to be turned into an iterative one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When attaching a device into a domain, the corresponding /dev
node might need to be created in the domain's namespace. For some
types of files we call mknod(), for symlinks we call symlink(),
but for others - which exist in the host namespace - we need to
so called 'bind mount' them (which is a way of passing a
file/directory between mount namespaces). There is this condition
in qemuDomainAttachDeviceMknodRecursive() which decides whether a
bind mount will be used, move it into a separate function so that
it can be reused later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This structure is going to be used from not only device attach
code, but also when building the namespace. Moreover, the code
lives in a separate file so the chances of clashing with another
name are minimal.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's not really a problem since this is a helper process that
dies as soon as the helper function returns, but the cleanup code
will be replaced with a function soon and this change prepares
the code for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
