In order to reuse the newly-created host-side disk struct in
the virstoragefile backing chain code, I first have to move
it to util/. This starts the process, by first moving the
security label structures.
* src/conf/domain_conf.h (virDomainDefGenSecurityLabelDef)
(virDomainDiskDefGenSecurityLabelDef, virSecurityLabelDefFree)
(virSecurityDeviceLabelDefFree, virSecurityLabelDef)
(virSecurityDeviceLabelDef): Move...
* src/util/virseclabel.h: ...to new file.
(virSecurityLabelDefNew, virSecurityDeviceLabelDefNew): Rename the
GenSecurity functions.
* src/qemu/qemu_process.c (qemuProcessAttach): Adjust callers.
* src/security/security_manager.c (virSecurityManagerGenLabel):
Likewise.
* src/security/security_selinux.c
(virSecuritySELinuxSetSecurityFileLabel): Likewise.
* src/util/virseclabel.c: New file.
* src/conf/domain_conf.c: Move security code, and fix fallout.
* src/Makefile.am (UTIL_SOURCES): Build new file.
* src/libvirt_private.syms (domain_conf.h): Move symbols...
(virseclabel.h): ...to new section.
Signed-off-by: Eric Blake <eblake@redhat.com>
While running qemucaps2xmltest, it was found that valgrind pointed out
the following memory leaks:
==29896== 0 bytes in 1 blocks are definitely lost in loss record 1 of 65
==29896== at 0x4A0577B: calloc (vg_replace_malloc.c:593)
==29896== by 0x4C6B45E: virAllocN (viralloc.c:191)
==29896== by 0x4232A9: virQEMUCapsGetMachineTypesCaps (qemu_capabilities.c:1999)
==29896== by 0x4234E7: virQEMUCapsInitGuestFromBinary (qemu_capabilities.c:789)
==29896== by 0x41F10B: testQemuCapsXML (qemucaps2xmltest.c:118)
==29896== by 0x41FFD1: virtTestRun (testutils.c:201)
==29896== by 0x41EE7A: mymain (qemucaps2xmltest.c:203)
==29896== by 0x42074D: virtTestMain (testutils.c:789)
==29896== by 0x3E6CE1ED1C: (below main) (libc-start.c:226)
==29896==
==29896== 0 bytes in 1 blocks are definitely lost in loss record 2 of 65
==29896== at 0x4A0577B: calloc (vg_replace_malloc.c:593)
==29896== by 0x4C6B45E: virAllocN (viralloc.c:191)
==29896== by 0x4232A9: virQEMUCapsGetMachineTypesCaps (qemu_capabilities.c:1999)
==29896== by 0x4234E7: virQEMUCapsInitGuestFromBinary (qemu_capabilities.c:789)
==29896== by 0x41F10B: testQemuCapsXML (qemucaps2xmltest.c:118)
==29896== by 0x41FFD1: virtTestRun (testutils.c:201)
==29896== by 0x41EEA3: mymain (qemucaps2xmltest.c:204)
==29896== by 0x42074D: virtTestMain (testutils.c:789)
==29896== by 0x3E6CE1ED1C: (below main) (libc-start.c:226)
Signed-off-by: Eric Blake <eblake@redhat.com>
In all other drivers we are doing so. Moreover, we don't want to parse
runtime information in attach (even if the attach is meant as live)
because we are generating the runtime info ourselves. We can't trust
users they supply sane values anyway.
==1140== 9 bytes in 1 blocks are definitely lost in loss record 72 of 1,151
==1140== at 0x4A06C2B: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==1140== by 0x623C758: xmlStrndup (in /usr/lib64/libxml2.so.2.9.1)
==1140== by 0x50FD763: virXMLPropString (virxml.c:483)
==1140== by 0x510F8B7: virDomainDeviceInfoParseXML (domain_conf.c:3685)
==1140== by 0x511ACFD: virDomainChrDefParseXML (domain_conf.c:7535)
==1140== by 0x5121D13: virDomainDeviceDefParse (domain_conf.c:9918)
==1140== by 0x13AE6313: qemuDomainAttachDeviceFlags (qemu_driver.c:6926)
==1140== by 0x13AE65FA: qemuDomainAttachDevice (qemu_driver.c:7005)
==1140== by 0x51C77DA: virDomainAttachDevice (libvirt.c:10231)
==1140== by 0x127FDD: remoteDispatchDomainAttachDevice (remote_dispatch.h:2404)
==1140== by 0x127EC5: remoteDispatchDomainAttachDeviceHelper (remote_dispatch.h:2382)
==1140== by 0x5241F81: virNetServerProgramDispatchCall (virnetserverprogram.c:437)
When doing live attach, we are passing the inactive definition anyway
since we are passing the result of virDomainDeviceDefCopy() which does
inactive copy by default.
Moreover, we are doing the same mistake in qemuhotplugtest.
Just a side note - it makes perfect sense to parse the runtime info
like alias in qemuDomainDetachDevice and qemuDomainUpdateDeviceFlags()
as in some cases the only difference to distinguish two devices can be
just their alias.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds an element to QEMU's capability XML, to
show if the underlying QEMU binary supports the live disk
snapshotting or not.
This allows any client to know ahead of time if the feature
is available.
Without this information available, the only way to check
for the snapshot support is to request one and check for
errors.
Signed-off-by: Francesco Romani <fromani@redhat.com>
Currently, the Linux kernel treats values of '0' and '1' as
the minimum of 2. Values larger than the maximum are changed
to the maximum.
Re-reading the shares value after setting it reflects this in
the live domain XML.
Currently, <cputune><shares>0</shares></cputune> is treated
as if it were not specified.
Treat is as a valid value if it was explicitly specified
and write it to the cgroups.
qemuDomainSetSchedulerParametersFlags() calls virQEMUDriverGetConfig() twice
and makes the reference counter leak. This removes redundant call.
Problem introduced in commit 45ad1ad
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch adds qemuMonitorGetDumpGuestMemoryCapability, which is used to check
whether the specified dump-guest-memory format is supported by qemu.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
It's finally time to start tracking disk backing chains in
<domain> XML. The first step is to start refactoring code
so that we have an object more convenient for representing
each host source resource in the context of a single guest
<disk>. Ultimately, I plan to move the new type into src/util
where it can be reused by virStorageFile, but to make the
transition easier to review, this patch just creates the
new type then fixes everything until it compiles again.
* src/conf/domain_conf.h (_virDomainDiskDef): Split...
(_virDomainDiskSourceDef): ...to new struct.
(virDomainDiskAuthClear): Use new type.
* src/conf/domain_conf.c (virDomainDiskDefFree): Split...
(virDomainDiskSourceDefClear): ...to new function.
(virDomainDiskGetType, virDomainDiskSetType)
(virDomainDiskGetSource, virDomainDiskSetSource)
(virDomainDiskGetDriver, virDomainDiskSetDriver)
(virDomainDiskGetFormat, virDomainDiskSetFormat)
(virDomainDiskAuthClear, virDomainDiskGetActualType)
(virDomainDiskDefParseXML, virDomainDiskSourceDefFormat)
(virDomainDiskDefFormat, virDomainDiskDefForeachPath)
(virDomainDiskDefGetSecurityLabelDef)
(virDomainDiskSourceIsBlockType): Adjust all users.
* src/lxc/lxc_controller.c (virLXCControllerSetupDisk):
Likewise.
* src/lxc/lxc_driver.c (lxcDomainAttachDeviceMknodHelper):
Likewise.
* src/qemu/qemu_command.c (qemuAddRBDHost, qemuParseRBDString)
(qemuParseDriveURIString, qemuParseGlusterString)
(qemuParseISCSIString, qemuParseNBDString)
(qemuDomainDiskGetSourceString, qemuBuildDriveStr)
(qemuBuildCommandLine, qemuParseCommandLineDisk)
(qemuParseCommandLine): Likewise.
* src/qemu/qemu_conf.c (qemuCheckSharedDevice)
(qemuAddISCSIPoolSourceHost, qemuTranslateDiskSourcePool):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainUpdateDeviceConfig)
(qemuDomainPrepareDiskChainElement)
(qemuDomainSnapshotCreateInactiveExternal)
(qemuDomainSnapshotPrepareDiskExternalBackingInactive)
(qemuDomainSnapshotPrepareDiskInternal)
(qemuDomainSnapshotPrepare)
(qemuDomainSnapshotCreateSingleDiskActive)
(qemuDomainSnapshotUndoSingleDiskActive)
(qemuDomainBlockPivot, qemuDomainBlockJobImpl)
(qemuDomainBlockCopy, qemuDomainBlockCommit): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsSafe): Likewise.
* src/qemu/qemu_process.c (qemuProcessGetVolumeQcowPassphrase)
(qemuProcessInitPasswords): Likewise.
* src/security/security_selinux.c
(virSecuritySELinuxSetSecurityFileLabel): Likewise.
* src/storage/storage_driver.c (virStorageFileInitFromDiskDef):
Likewise.
* tests/securityselinuxlabeltest.c (testSELinuxLoadDef):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
It's easy to shed the daemon these days. With this XML snippet:
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/some/dummy/path/test.bin'>
<seclabel model='dac' relabel='no'/>
</source>
<target dev='vdb' bus='virtio'/>
<readonly/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
</disk>
I get the SIGSEGV when starting the domain. The thing is, when
starting a domain, we check for its disk presence. For some reason,
when determining the disk chain, we parse the <seclabel/> (don't ask
me why). However, there's no label attribute in the XML, so we end up
calling virParseOwnershipIds() over NULL string:
[Switching to Thread 0x7ffff10c4700 (LWP 30956)]
__strchr_sse42 () at ../sysdeps/x86_64/multiarch/strchr.S:136
136 ../sysdeps/x86_64/multiarch/strchr.S: No such file or directory.
(gdb) bt
#0 __strchr_sse42 () at ../sysdeps/x86_64/multiarch/strchr.S:136
#1 0x00007ffff749f800 in virParseOwnershipIds (label=0x0, uidPtr=uidPtr@entry=0x7ffff10c2df0, gidPtr=gidPtr@entry=0x7ffff10c2df4) at util/virutil.c:2115
#2 0x00007fffe929f006 in qemuDomainGetImageIds (gid=0x7ffff10c2df4, uid=0x7ffff10c2df0, disk=0x7fffe40cb000, vm=0x7fffe40a6410, cfg=0x7fffe409ae00) at qemu/qemu_domain.c:2385
#3 qemuDomainDetermineDiskChain (driver=driver@entry=0x7fffe40120e0, vm=vm@entry=0x7fffe40a6410, disk=disk@entry=0x7fffe40cb000, force=force@entry=false) at qemu/qemu_domain.c:2414
#4 0x00007fffe929f128 in qemuDomainCheckDiskPresence (driver=driver@entry=0x7fffe40120e0, vm=vm@entry=0x7fffe40a6410, cold_boot=cold_boot@entry=true) at qemu/qemu_domain.c:2250
#5 0x00007fffe92b6fc8 in qemuProcessStart (conn=conn@entry=0x7fffd4000b60, driver=driver@entry=0x7fffe40120e0, vm=vm@entry=0x7fffe40a6410, migrateFrom=migrateFrom@entry=0x0, stdin_fd=stdin_fd@entry=-1, stdin_path=stdin_path@entry=0x0, snapshot=snapshot@entry=0x0,
vmop=vmop@entry=VIR_NETDEV_VPORT_PROFILE_OP_CREATE, flags=flags@entry=1) at qemu/qemu_process.c:3813
#6 0x00007fffe93087e8 in qemuDomainObjStart (conn=0x7fffd4000b60, driver=driver@entry=0x7fffe40120e0, vm=vm@entry=0x7fffe40a6410, flags=flags@entry=0) at qemu/qemu_driver.c:6051
#7 0x00007fffe9308e32 in qemuDomainCreateWithFlags (dom=0x7fffcc000d50, flags=0) at qemu/qemu_driver.c:6105
#8 0x00007ffff753c5cc in virDomainCreate (domain=domain@entry=0x7fffcc000d50) at libvirt.c:8861
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Busy enterprise workloads hosted on large sized VM's tend to dirty
memory faster than the transfer rate achieved via live guest migration.
Despite some good recent improvements (& using dedicated 10Gig NICs
between hosts) the live migration may NOT converge.
Recently support was added in qemu (version 1.6) to allow a user to
choose if they wish to force convergence of their migration via a
new migration capability : "auto-converge". This feature allows for qemu
to auto-detect lack of convergence and trigger a throttle-down of the
VCPUs.
This patch includes the libvirt support needed to trigger this
feature. (Testing is in progress)
Signed-off-by: Chegu Vinod <chegu_vinod@hp.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When checking compatibility of a device with a domain definition, we
should know what we're going to do with the device. Because we may need
to check for different things when we're attaching a new device versus
detaching an existing device.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
A device needs to be checked for compatibility with the domain
definition it corresponds to. Specifically, for VIR_DOMAIN_AFFECT_CONFIG
case we should check against persistent def rather than active def.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=844378
When qemu dies early after connecting to its monitor but before we
actually try to read something from the monitor, we would just fail
domain start with useless message:
"An error occurred, but the cause is unknown"
This is because the real error gets reported in a monitor EOF handler
executing within libvirt's event loop.
The fix is to take any error set in qemuMonitor structure and propagate
it into the thread-local error when qemuMonitorClose is called and no
thread-local error is set.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Wire up all the pieces to send arbitrary qemu events to a
client using libvirt-qemu.so. If the extra bookkeeping of
generating event objects even when no one is listening turns
out to be noticeable, we can try to further optimize things
by adding a counter for how many connections are using events,
and only dump events when the counter is non-zero; but for
now, I didn't think it was worth the code complexity.
* src/qemu/qemu_driver.c
(qemuConnectDomainQemuMonitorEventRegister)
(qemuConnectDomainQemuMonitorEventDeregister): New functions.
* src/qemu/qemu_monitor.h (qemuMonitorEmitEvent): New prototype.
(qemuMonitorDomainEventCallback): New typedef.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONIOProcessEvent):
Report events.
* src/qemu/qemu_monitor.c (qemuMonitorEmitEvent): New function, to
pass events through.
* src/qemu/qemu_process.c (qemuProcessHandleEvent): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Valgrind reported leaking of maxCpus and arch strings from
virXPathString, as well as the leak of the machineMaxCpus array.
Don't use 'str' for the strings we don't want to free, to allow
freeing of 'str' in the cleanup label and free machineMaxCpus
in virCapsReset too.
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As part of the goal to get away from doing string matching on
filenames when deciding whether to emit a log message, turn
the virLogSource enum into a struct which contains a log
"name". There will eventually be one virLogSource instance
statically declared per source file. To minimise churn in this
commit though, a single global instance is used.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The dtrace probe macros rely on the logging API. We can't make
the internal.h header include the virlog.h header though since
that'd be a circular include. Instead simply split the dtrace
probes into their own header file, since there's no compelling
reason for them to be in the main internal.h header.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We allow translation from no_bandwidth to has_bandwidth for a vnic.
However, going in the opposite direction is not implemented. It's not
limitation of the API rather than internal implementation. The problem
is, we correctly detect that user hasn't specified any outbound (say
he wants to clear out outbound). However, this gets overwritten by
current vnic outbound settings. Then, virNetDevBandwidthSet doesn't
change anything. We need to stop overwriting the outbound if users
don't want us to. Same applies for inbound.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If there should be some sort of separator it is better to use comment
with the filename, copyright, description, license information and
authors.
Found by:
git grep -nH '^$' | grep '\.[ch]:1:'
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch is not trying to fix every switch, just the ones I worked
with last time, because some of these were especially unreadable.
Covers enums virDomainGraphicsType and virDomainChrType (where
applicable).
Also sort its cases by their value.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit a1cbe4b5 added a check for spaces around assignments and this
patch extends it to checks for spaces around '=='. One exception is
virAssertCmpInt where comma after '==' is acceptable (since it is a
macro and '==' is its argument).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Coverity found an issue in lxc_driver and uml_driver that we don't
check the return value of register functions.
I've also updated all other places and unify the way we check the
return value.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Right now we are parsing the XML as though it's live, which for example
will choke on hardcoded XML like:
<seclabel type='dynamic' model='selinux' relabel='yes'/>
Erroring with:
$ sudo virsh domxml-to-native qemu-argv f
error: XML error: security label is missing
All drivers are fixed, but only qemu was tested.
We have to explicitly destroy TAP devices on FreeBSD because
they're not freed after being closed, otherwise we end up with
orphaned TAP devices after destroying a domain.
Many of the domain xml format functions (including all of the device
format functions) had hard-coded spaces, which made for incorrect
indentation when those functions were called in a different context
(for example, commit 2122cf39 added <interface> XML into the document
provided to a network hook script, and in this case it should have
been indented by 2 spaces, but was instead indented by 6 spaces).
To make it possible to insert a properly indented device anywhere into
an XML document, this patch removes hardcoded spaces from the
formatting functions, and calls virBufferAdjustIndent() at appropriate
places instead. (a regex search of domain_conf.c was done to assure
that all occurrences of hardcoded spaces were removed).
virDomainDiskSourceDefFormatInternal() is also called from
snapshot_conf.c, so two virBufferAdjustIndent() calls were temporarily
added around that call - those functions will have hardcoded spaces
removed in a separate patch.
This could cause some conflicts when backporting future changes to the
formatting functions to older branches, but fortunately the changes
are almost all trivial, so conflict resolution will be obvious.
When I played with virtlockd I was stunned by lacking
documentation. My frustration got bigger when I had to
read the patches to get the correct value to set in
qemu.conf.
Moreover, from pure libvirt-pride I'm changing commented
value from sanlock to lockd. We want to favor our own
implementation after all.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The kernel didn't support the unprivileged SGIO for SCSI generic
device finally, and since it's unknow whether the way to support
unprivileged SGIO for SCSI generic device will be similar as for
SCSI block device or not, even it's simliar (I.e. via sysfs, for
SCSI block device, it's /sys/dev/block/8\:0/queue/unpriv_sgio,
for example), the file name might be different, So it's better not
guess what it should be like currently.
This patch removes the related code (mainly about the "shareable"
checking on the "sgio" setting, it's not supported at all, why
we leave checking code there? :-), and error out if "sgio" is
specified in the domain config.
Changes parameter from vm def to specific hostdevs info and name info, so that
it could be used more widely, e.g, could be used without full vm def info.
Some virHostdevXXXX methods included the string Hostdev again
as a suffix. Change the latter to Device instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Change any method names with Usb, Pci or Scsi to use
USB, PCI and SCSI since they are abbreviations.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Various methods in virnetdev.c and virhostdev.c were missing
const-ness for several char * parameters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
For extracting hostdev codes from qemu_hostdev.c to common library, change qemu
specific COLD_BOOT handling to be a flag, and pass it to hostdev functions.
For extracting hostdev codes from qemu_hostdev.c to common library, change qemu
specific cfg->relaxedACS handling to be a flag, and pass it to hostdev
functions.
Same logic of preparing/reattaching hostdevs could be used in attach/detach
hotplug places, so reuse hostdev interfaces to avoid duplicate, also for later
extracting general code to common library.
Update parameters from vm->def to specific name, hostdevs, nhostdevs to keep
consistentcy with PreparePCIDevices and PrepareSCSIDevices. And, at the same
time, make it reusable in later patch.
When attaching to a QEMU process, the def->seclabels array is
going to be empty. The qemuProcessAttach method must thus
populate it with data for the security drivers.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
While investigating https://bugzilla.redhat.com/show_bug.cgi?id=1061827
I noticed that we pass user input unscathed for block-pull, but
always pass a canonical absolute name through for block-commit.
[Note that we probably _ought_ to validate that the user's request
for block-pull actually matches the backing chain, the way we already
do for block-commit - but that's a separate issue. Further note that
the ability to pass user input through unscathed allows backdoors
such as specifying a backing image that is a network URI such as
a gluster disk, instead of forcing things to the local file system;
which is an area still under active investigation on whether libvirt
needs to behave differently for network disks.]
Since qemu may write the name that the user passed in as the backing
file, a user may have a reason to want a relative file name passed
through to qemu, and always munging things to absolute prevents that.
Put another way, if you have the backing chain:
[A] <- [B(back=./A)] <- [C(back=./B)]
and commit B into A (virsh blockcommit $dom vda --base A --top B),
the metadata of C will have to be re-written. But should it be
rewritten as [C(back=./A)] or as [C(back=/path/to/A)]? Still up in
the air is whether qemu's decision should be based on whether B
and/or C had relative paths, or on whether the --base and/or
--top arguments to the command were relative paths; but if we always
pass a canonical name, we've prevented the spelling of the command
arguments from being part of the hueristics that qemu uses.
I also audited the code, and verified that we never call
qemuMonitorBlockCommit() with a NULL base, either before or after
the change to qemu_driver.c.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Preserve user's
spelling, since absolute vs. relative matters to qemu.
* src/qemu/qemu_monitor.h (qemuMonitorBlockCommit): Base is never
null.
* src/qemu/qemu_monitor.c (qemuMonitorBlockCommit): Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockCommit):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockCommit):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The qemu_bridge_filter.c file had some helpers for calling
the ebtablesXXX functions todo bridge filtering. The only
thing these helpers did was to overwrite the original error
message from the ebtables code. For added fun, the callers
of these helpers overwrote the errors yet again. For even
more fun, one of the helpers called another helper and
overwrite its errors too.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Extracting capabilities from QEMU takes a notable amount of time
when all QEMU binaries are installed. Each system emulator
needs about 200-300ms multiplied by 26 binaries == ~5-8 seconds.
This change causes the QEMU driver to save an XML file containing
the content of the virQEMUCaps object instance in the cache
dir eg /var/cache/libvirt/qemu/capabilities/$SHA256(binarypath).xml
or $HOME/.cache/libvirt/qemu/cache/capabilities/$SHA256(binarypath).xml
We attempt to load this and only if it fails, do we fallback to
probing the QEMU binary. The ctime of the QEMU binary and libvirtd
are stored in the cached file and its data discarded if either
of them change.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Debian's package manager will preserve mtime timestamp on binaries
from the time they are built, rather than installed. So if a
user downgrades their QEMU dpkg, the libvirt capabilities
cache will not refresh. The fix is to use ctime instead of mtime
since it cannot be faked.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Avoid the freeing of an array of zero file descriptors in case
of error. Initialize the array to -1 using memset.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
This fixes a possible double free. In virNetworkAssignDef() if
virBitmapNew() fails, then virNetworkObjFree(network) is called.
However, with network->def pointing to actual @def. So if caller
frees @def again, ...
Moreover, this fixes one possible memory leak too. In
virInterfaceAssignDef() if appending to the list of interfaces
fails, we ought to call virInterfaceObjFree() instead of bare
VIR_FREE().
Although, in order to do that some array size variables needs
to be turned into size_t rather than int.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When domain is started with setting that cannot be done, i.e. those
that require cgroups, there is no error reported and it succeeds
without any message whatsoever.
When setting with API, virsh, an error is reported, but only due to
the fact that no cgroups are mounted (priv->cgroup == NULL).
Given the above it seems reasonable to reject such unsupported
settings.
This patch effectively changes the error message from:
$ virsh -c qemu:///session schedinfo dummy
Scheduler : Unknown
error: Requested operation is not valid: cgroup CPU controller is not mounted
to:
$ virsh -c qemu:///session schedinfo dummy
Scheduler : Unknown
error: Operation not supported: CPU tuning is not available in session mode
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1023366
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The qemuMonitorJSONBlockJob handles a few errors internally. If qemu
returns a different error we would report a rather unhelpful message:
$ virsh blockpull gluster-job vda --base /dev/null
error: internal error: Unexpected error
As the actual message from qemu contains a bit more info, let's use it
to report something a little more useful:
$ virsh blockpull gluster-job vda --base /dev/null
error: internal error: Unexpected error: (GenericError) 'Base '/dev/null' not found'
In qemuMonitorJSONExtractCPUInfo an error message hinted on missing
character device data which is wrong.
Also a comment states that only qemu-kvm tree includes the thread_id
field. This is no longer true.
https://bugzilla.redhat.com/show_bug.cgi?id=1071264
Reverting of external snapshots is not supported currently. The check
that is present doesn't properly check for all aspects that make a
snapshot external. Use virDomainSnapshotIsExternal() to do the check.
As I did previously in 4f588a1b46, libvirt needs to set virtio vectors.
Previously, we were advised to use vectors=N, where
N = 2 * (number of queues) + 1
However, just recently this advisory has changed on the Multiquue wiki
page [1] to:
N = 2 * (number of queues) + 2
1: http://www.linux-kvm.org/page/Multiqueue#Enable_MQ_feature
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Auditing all callers of virCommandRun and virCommandWait that
passed a non-NULL pointer for exit status turned up some
interesting observations. Many callers were merely passing
a pointer to avoid the overall command dying, but without
caring what the exit status was - but these callers would
be better off treating a child death by signal as an abnormal
exit. Other callers were actually acting on the status, but
not all of them remembered to filter by WIFEXITED and convert
with WEXITSTATUS; depending on the platform, this can result
in a status being reported as 256 times too big. And among
those that correctly parse the output, it gets rather verbose.
Finally, there were the callers that explicitly checked that
the status was 0, and gave their own message, but with fewer
details than what virCommand gives for free.
So the best idea is to move the complexity out of callers and
into virCommand - by default, we return the actual exit status
already cleaned through WEXITSTATUS and treat signals as a
failed command; but the few callers that care can ask for raw
status and act on it themselves.
* src/util/vircommand.h (virCommandRawStatus): New prototype.
* src/libvirt_private.syms (util/command.h): Export it.
* docs/internals/command.html.in: Document it.
* src/util/vircommand.c (virCommandRawStatus): New function.
(virCommandWait): Adjust semantics.
* tests/commandtest.c (test1): Test it.
* daemon/remote.c (remoteDispatchAuthPolkit): Adjust callers.
* src/access/viraccessdriverpolkit.c (virAccessDriverPolkitCheck):
Likewise.
* src/fdstream.c (virFDStreamCloseInt): Likewise.
* src/lxc/lxc_process.c (virLXCProcessStart): Likewise.
* src/qemu/qemu_command.c (qemuCreateInBridgePortWithHelper):
Likewise.
* src/xen/xen_driver.c (xenUnifiedXendProbe): Simplify.
* tests/reconnect.c (mymain): Likewise.
* tests/statstest.c (mymain): Likewise.
* src/bhyve/bhyve_process.c (virBhyveProcessStart)
(virBhyveProcessStop): Don't overwrite virCommand error.
* src/libvirt.c (virConnectAuthGainPolkit): Likewise.
* src/openvz/openvz_driver.c (openvzDomainGetBarrierLimit)
(openvzDomainSetBarrierLimit): Likewise.
* src/util/virebtables.c (virEbTablesOnceInit): Likewise.
* src/util/viriptables.c (virIpTablesOnceInit): Likewise.
* src/util/virnetdevveth.c (virNetDevVethCreate): Fix debug
message.
* src/qemu/qemu_capabilities.c (virQEMUCapsInitQMP): Add comment.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSINodeUpdate): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
When probing QEMU capabilities fails for a binary generate a
log message with MESSAGE_ID==8ae2f3fb-2dbe-498e-8fbd-012d40afa361.
This can be directly queried from journald based on the UUID
instead of needing string grep. This lets tools like libguestfs'
bug reporting tool trivially do automated sanity tests on the
host they're running on.
$ journalctl MESSAGE_ID=8ae2f3fb-2dbe-498e-8fbd-012d40afa361
Feb 21 17:11:01 localhost.localdomain lt-libvirtd[9196]:
Failed to probe capabilities for /bin/qemu-system-alpha:
internal error: Child process (LC_ALL=C LD_LIBRARY_PATH=
/home/berrange/src/virt/libvirt/src/.libs PATH=/usr/lib64/
ccache:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:
/usr/bin:/root/bin HOME=/root USER=root LOGNAME=root
/bin/qemu-system-alpha -help) unexpected exit status 127:
/bin/qemu-system-alpha: error while loading shared libraries:
libglapi.so.0: cannot open shared object file: No such file
or directory
$ journalctl MESSAGE_ID=8ae2f3fb-2dbe-498e-8fbd-012d40afa361 --output=json
{ ...snip...
"LIBVIRT_SOURCE" : "file",
"PRIORITY" : "3",
"CODE_FILE" : "qemu/qemu_capabilities.c",
"CODE_LINE" : "2770",
"CODE_FUNC" : "virQEMUCapsLogProbeFailure",
"MESSAGE_ID" : "8ae2f3fb-2dbe-498e-8fbd-012d40afa361",
"LIBVIRT_QEMU_BINARY" : "/bin/qemu-system-xtensa",
"MESSAGE" : "Failed to probe capabilities for /bin/qemu-system-xtensa:
internal error: Child process (LC_ALL=C LD_LIBRARY_PATH=/home/berrange
/src/virt/libvirt/src/.libs PATH=/usr/lib64/ccache:/usr/local/sbin:
/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin HOME=/root
USER=root LOGNAME=root /bin/qemu-system-xtensa -help) unexpected
exit status 127: /bin/qemu-system-xtensa: error while loading shared
libraries: libglapi.so.0: cannot open shared object file: No such
file or directory\n" }
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As of 0bd2ccdec an empty disk path for virDomainBlockStats (or the one
with Flags) is allowed meaning "get me overall summarized statistics".
However, running 'virsh domblkstat $dom' throws a misleading error:
# ./tools/virsh domblkstat dom
error: Failed to get block stats dom
error: invalid argument: invalid path:
while after this commit
# virsh domblkstat dom
error: Operation not supported: summary statistics are not supported yet
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1038363
If a domain has a different maximum for persistent and live maxmem
or max vcpus, then it is possible to hit cases where libvirt
refuses to adjust the current values or gets halfway through
the adjustment before failing. Better is to determine up front
if the change is possible for all requested flags.
Based on an idea by Geoff Franks.
* src/qemu/qemu_driver.c (qemuDomainSetMemoryFlags): Compute
correct maximum if both live and config are being set.
(qemuDomainSetVcpusFlags): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch changes network device type used by default from rtl8139
to virtio when architecture type is aarch64 and machine type is virt.
Qemu doesn't support any other machine types for aarch64 right now and
we can't make any other aarch64-specific tuning in this function yet.
Signed-off-by: Oleg Strikov <oleg.strikov@canonical.com>
There is no keyboard working on PPC64 and PS2 mouse is only for X86
when graphics are enabled.
Add a USB keyboard and USB mouse for PPC64 when graphics are enabled.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Format qemu command line for USB keyboard
and add test cases for it.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
There might be some use cases, where user wants to prepare the host or
its environment prior to starting a network and do some cleanup after
the network has been shut down. Consider all the functionality that
libvirt doesn't currently have as an example what a hook script can
possibly do.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, there's just one place where we care if hook script is
changing the domain XML: migration hook for incoming migration. In
all other places where a hook script is executed, we don't read the
XML back from the script.
Anyway, the hook script can alter domain XML and hence we should taint
it if the script did.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add support for gluster backed images as sources for snapshots in the
qemu driver. This will also simplify adding further network backed
volumes as sources for snapshot in case qemu will support them.
Use the new storage driver APIs to delete snapshot backing files in case
of failure instead of directly relying on "unlink". This will help us in
the future when we will be adding network based storage without local
representation in the host.
All the data for getting the actual type is present in the snapshot
config. There is no need to have this function private to the qemu
driver and it will be re-used later in other parts of libvirt
All the data for getting the actual type is present in the domain
config. There is no need to have this function private to the qemu
driver and it will be re-used later in other parts of libvirt
On some platforms like IBM PowerNV the NUMA node numbers can be
non-sequential. For eg. numactl --hardware o/p from such a machine looks
as given below
node distances:
node 0 1 16 17
0: 10 40 40 40
1: 40 10 40 40
16: 40 40 10 40
17: 40 40 40 10
The NUMA nodes are 0,1,16,17
Libvirt uses sequential index as NUMA node numbers and this can
result in crash or incorrect results.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
Add a new backend for any character device. This backend uses channel
in spice connection. This channel is similar to spicevmc, but
all-purpose in contrast to spicevmc.
Apart from spicevmc, spiceport-backed chardev will not be formatted
into the command-line if there is no spice to use (with test for that
as well). For this I moved the def->graphics counting to the start
of the function so its results can be used in rest of the code even in
the future.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch is here just to ease the code review and make related
changes look more sensible. Apart from removing the condition this is
merely a whitespace (indentation) change.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Limiting ourselves to qemu without QEMU_CAPS_DEVICE capability, we
used '-serial none' only if there was no serial device defined in the
domain XML. This means that if we want to have a possibility of the
device being defined in XML, but not used in the command-line
(e.g. when it's pointless), we'll fail to attach '-serial none' to the
command-line (when skipping the device's command-line building and the
device being the only one).
Since there is no such device, this patch doesn't actually do
anything, but enables easier future additions in this manner.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add a new character device backend called 'spiceport' that uses
spice's channel for communications and apart from spicevmc can be used
as a backend for any character device from libvirt's point of view.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The code took into account only the global permissions. The domains now
support per-vm DAC labels and per-image DAC labels. Use the most
specific label available.
Add a new <timer> for the HyperV reference time counter enlightenment
and the iTSC reference page for Windows guests.
This feature provides a paravirtual approach to track timer events for
the guest (similar to kvmclock) with the option to use real hardware
clock on systems with a iTSC with compensation across various hosts.
According to the documentation various timer options are only supported
by certain timer types. Add a post parse check to verify that the user
didn't specify invalid options.
Also fix the qemu command line parsing function to set correct default
values for the kvmclock timer so that it passes the new check.
Couple of codepaths shared the same code which can be moved out to a
function and on one of such places, qemuMigrationConfirmPhase(), the
domain was resumed even if it wasn't running before the migration
started.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1057407
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This commit allows to attach/detach a <filesystem> device in qemu. For
this purpose I'm introducing two new functions: virDomainFSInsert() and
virDomainFSRemove() and adding necessary code in the qemu driver. It
compares filesystems based on their "destination" folder. So if two
filesystems share the same destination, they are considered equal and
the qemu driver would reject the insertion.
Signed-off-by: Matthieu Coudron <mattator@gmail.com>
If virDomainMemoryStats was run on a domain with virtio balloon driver
running on an old qemu which supports QMP but does not support qom-list
QMP command, libvirtd would crash. The reason is we did not check if
qemuMonitorJSONGetObjectListPaths failed and moreover we even stored its
result in an unsigned integer type.
When attempting a blockcommit from the top layer, the base argument
passed is NULL. This will be dereferenced when attempting a commit with
an empty image chain. Output the real volume path instead:
virsh blockcommit --verbose --path vda --domain DOMNAME --wait
error: invalid argument: top '/path/somefile' in chain for 'vda' has no backing file
instead of:
error: invalid argument: top '(null)' in chain for 'vda' has no backing file
https://bugzilla.redhat.com/show_bug.cgi?id=1046192
Commit b8bf79a, which adds clock='variable', forgets to check
localtime basis in qemuBuildClockArgStr(). So that localtime
basis could not be used.
Reported-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Noticed a misuse of 'to' while testing my event regression under
polkit ACLs, and decided to review the entire conf files for
other legibility bugs.
* daemon/libvirtd.conf: Use correct grammar.
* src/qemu/qemu.conf: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1058839
Commit f9f56340 for CVE-2014-0028 almost had the right idea - we
need to check the ACL rules to filter which events to send. But
it overlooked one thing: the event dispatch queue is running in
the main loop thread, and therefore does not normally have a
current virIdentityPtr. But filter checks can be based on current
identity, so when libvirtd.conf contains access_drivers=["polkit"],
we ended up rejecting access for EVERY event due to failure to
look up the current identity, even if it should have been allowed.
Furthermore, even for events that are triggered by API calls, it
is important to remember that the point of events is that they can
be copied across multiple connections, which may have separate
identities and permissions. So even if events were dispatched
from a context where we have an identity, we must change to the
correct identity of the connection that will be receiving the
event, rather than basing a decision on the context that triggered
the event, when deciding whether to filter an event to a
particular connection.
If there were an easy way to get from virConnectPtr to the
appropriate virIdentityPtr, then object_event.c could adjust the
identity prior to checking whether to dispatch an event. But
setting up that back-reference is a bit invasive. Instead, it
is easier to delay the filtering check until lower down the
stack, at the point where we have direct access to the RPC
client object that owns an identity. As such, this patch ends
up reverting a large portion of the framework of commit f9f56340.
We also have to teach 'make check' to special-case the fact that
the event registration filtering is done at the point of dispatch,
rather than the point of registration. Note that even though we
don't actually use virConnectDomainEventRegisterCheckACL (because
the RegisterAny variant is sufficient), we still generate the
function for the purposes of documenting that the filtering
takes place.
Also note that I did not entirely delete the notion of a filter
from object_event.c; I still plan on using that for my upcoming
patch series for qemu monitor events in libvirt-qemu.so. In
other words, while this patch changes ACL filtering to live in
remote.c and therefore we have no current client of the filtering
in object_event.c, the notion of filtering in object_event.c is
still useful down the road.
* src/check-aclrules.pl: Exempt event registration from having to
pass checkACL filter down call stack.
* daemon/remote.c (remoteRelayDomainEventCheckACL)
(remoteRelayNetworkEventCheckACL): New functions.
(remoteRelay*Event*): Use new functions.
* src/conf/domain_event.h (virDomainEventStateRegister)
(virDomainEventStateRegisterID): Drop unused parameter.
* src/conf/network_event.h (virNetworkEventStateRegisterID):
Likewise.
* src/conf/domain_event.c (virDomainEventFilter): Delete unused
function.
* src/conf/network_event.c (virNetworkEventFilter): Likewise.
* src/libxl/libxl_driver.c: Adjust caller.
* src/lxc/lxc_driver.c: Likewise.
* src/network/bridge_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/test/test_driver.c: Likewise.
* src/uml/uml_driver.c: Likewise.
* src/vbox/vbox_tmpl.c: Likewise.
* src/xen/xen_driver.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
commit f094aaac changed qemuPrepareHostdevPCIDevices() such that it
may modify the "backend" (vfio vs. legacy kvm) setting in the
virHostdevDef. However, qemuDomainAttachHostPciDevice() (used by
hotplug) copies the backend setting into a local *before* calling
qemuPrepareHostdevPCIDevices(), and then later makes a decision based
on that pre-change value.
The result is that, if the backend had been set to "default" (i.e. not
specified in the config) and was later updated to "VFIO" by
qemuPrepareHostdevPCIDevices(), the qemu process' MacMemLock is not
increased (as is required for VFIO device assignment).
This patch delays making the local copy of backend until after its
potential modification.
We support only one spicevmc channel name anyway and the code is
prepared to use the default one, there's only one check missing. It
is also mentioned in the documentation already and helps defining
domains with spice vdagent for people using virsh.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The NWFilter code has as a deadlock race condition between
the virNWFilter{Define,Undefine} APIs and starting of guest
VMs due to mis-matched lock ordering.
In the virNWFilter{Define,Undefine} codepaths the lock ordering
is
1. nwfilter driver lock
2. virt driver lock
3. nwfilter update lock
4. domain object lock
In the VM guest startup paths the lock ordering is
1. virt driver lock
2. domain object lock
3. nwfilter update lock
As can be seen the domain object and nwfilter update locks are
not acquired in a consistent order.
The fix used is to push the nwfilter update lock upto the top
level resulting in a lock ordering for virNWFilter{Define,Undefine}
of
1. nwfilter driver lock
2. nwfilter update lock
3. virt driver lock
4. domain object lock
and VM start using
1. nwfilter update lock
2. virt driver lock
3. domain object lock
This has the effect of serializing VM startup once again, even if
no nwfilters are applied to the guest. There is also the possibility
of deadlock due to a call graph loop via virNWFilterInstantiate
and virNWFilterInstantiateFilterLate.
These two problems mean the lock must be turned into a read/write
lock instead of a plain mutex at the same time. The lock is used to
serialize changes to the "driver->nwfilters" hash, so the write lock
only needs to be held by the define/undefine methods. All other
methods can rely on a read lock which allows good concurrency.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To support passing the path of the test data to the utils, one
more argument is added to virSCSIDeviceGetSgName,
virSCSIDeviceGetDevName, and virSCSIDeviceNew, and the related
code is changed accordingly.
Later tests for the scsi utils will be based on this patch.
Signed-off-by: Osier Yang <jyang@redhat.com>
It doesn't make sense to fail if the SCSI host device is specified
as "shareable" explicitly between domains (NB, it works if and only
if the device is specified as "shareable" for *all* domains,
otherwise it fails).
To fix the problem, this patch introduces an array for virSCSIDevice
struct, which records all the names of domain which are using the
device (note that the recorded domains must specify the device as
shareable). And the change on the data struct brings on many
subsequent changes in the code.
Prior to this patch, the "shareable" tag didn't work as expected,
it actually work like "non-shareable". So this patch also added notes
in formatdomain.html to declare the fact.
* src/util/virscsi.h:
- Remove virSCSIDeviceGetUsedBy
- Change definition of virSCSIDeviceGetUsedBy and virSCSIDeviceListDel
- Add virSCSIDeviceIsAvailable
* src/util/virscsi.c:
- struct virSCSIDevice: Change "used_by" to be an array; Add
"n_used_by" as the array count
- virSCSIDeviceGetUsedBy: Removed
- virSCSIDeviceFree: frees the "used_by" array
- virSCSIDeviceSetUsedBy: Copy the domain name to avoid potential
memory corruption
- virSCSIDeviceIsAvailable: New
- virSCSIDeviceListDel: Change the logic, for device which is already
in the list, just remove the corresponding entry in "used_by". And
since it's only used in one place, we can safely removing the code
to find out the dev in the list first.
- Copyright updating
* src/libvirt_private.sys:
- virSCSIDeviceGetUsedBy: Remove
- virSCSIDeviceIsAvailable: New
* src/qemu/qemu_hostdev.c:
- qemuUpdateActiveScsiHostdevs: Check if the device existing before
adding it to the list;
- qemuPrepareHostdevSCSIDevices: Error out if the not all domains
use the device as "shareable"; Also don't try to add the device
to the activeScsiHostdevs list if it already there; And make
more sensible error w.r.t the current "shareable" value in
driver->activeScsiHostdevs.
- qemuDomainReAttachHostScsiDevices: Change the logic according
to the changes on helpers.
Signed-off-by: Osier Yang <jyang@redhat.com>
Add support for specifying various types when doing snapshots. This will
later allow to do snapshots on network backed volumes. Disks of type
'volume' are not supported by snapshots (yet).
Also amend the test suite to check parsing of the various new disk
types that can now be specified.
Creating a qemu VM with /dev/hwrng as backend RNG device throws the
following error - "Could not open '/dev/hwrng': Permission denied"
This patch fixes the issue
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently the qemuDomainGetBlockInfo will return allocation == physical
for most backing stores. For a qcow2 block backed device it's possible
to return the highest lv extent allocated from qemu for an active guest.
That is a value where allocation != physical and one would hope be less.
However, if the guest is not running, then the code falls back to returning
allocation == physical. This turns out to be problematic for rhev which
monitors the size of the backing store. During a migration, before the
VM has been started on the target and while it is deemed inactive on the
source, there's a small window of time where the allocation is returned
as physical triggering the code to extend the file unnecessarily.
Since rhev uses transient domains and this is edge condition for a transient
domain, rather than returning good status and allocation == physical when
this "window of opportunity" exists, this patch will check for a transient
(or non persistent) domain and return a failure to the caller rather than
returning the defaults. For a persistent domain, the defaults will be
returned. The description for the virDomainGetBlockInfo has been updated
to describe the phenomena.
the array params is allocated by VIR_ALLOC_N in
remoteDispatchDomainGetCPUStats. it had been set
to zero. No need to reset it to zero again, and
this reset here is incorrect too, nparams * ncpus
is the array length not the size of params array.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Unlike the host devices of other types, SCSI host device XML supports
"shareable" tag. This patch introduces it for the virSCSIDevice struct
for a later patch use (to detect if the SCSI device is shareable when
preparing the SCSI host device in QEMU driver).
I noticed that we allow virDomainGetVcpusFlags even for read-only
connections, but that with a flag, it can require guest agent
interaction. It is feasible that a malicious guest could
intentionally abuse the replies it sends over the guest agent
connection to possibly trigger a bug in libvirt's JSON parser,
or withhold an answer so as to prevent the use of the agent
in a later command such as a shutdown request. Although we
don't know of any such exploits now (and therefore don't mind
posting this patch publicly without trying to get a CVE assigned),
it is better to err on the side of caution and explicitly require
full access to any domain where the API requires guest interaction
to operate correctly.
I audited all commands that are marked as conditionally using a
guest agent. Note that at least virDomainFSTrim is documented
as needing a guest agent, but that such use is unconditional
depending on the hypervisor (so the existing domain:fs_trim ACL
should be sufficient there, rather than also requirng domain:write).
But when designing future APIs, such as the plans for obtaining
a domain's IP addresses, we should copy the approach of this patch
in making interaction with the guest be specified via a flag, and
use that flag to also require stricter access checks.
* src/libvirt.c (virDomainGetVcpusFlags): Forbid guest interaction
on read-only connection.
(virDomainShutdownFlags, virDomainReboot): Improve docs on agent
interaction.
* src/remote/remote_protocol.x
(REMOTE_PROC_DOMAIN_SNAPSHOT_CREATE_XML)
(REMOTE_PROC_DOMAIN_SET_VCPUS_FLAGS)
(REMOTE_PROC_DOMAIN_GET_VCPUS_FLAGS, REMOTE_PROC_DOMAIN_REBOOT)
(REMOTE_PROC_DOMAIN_SHUTDOWN_FLAGS): Require domain:write for any
conditional use of a guest agent.
* src/xen/xen_driver.c: Fix clients.
* src/libxl/libxl_driver.c: Likewise.
* src/uml/uml_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/lxc/lxc_driver.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Libvirtd would crash if a domain contained an empty cdrom drive of
type='volume' as the disk def->srcpool member would be dereferenced. Fix
it by checking if the source pool is present before dereferencing it.
Also alter tests to catch this issue in the future.
Reported by: Kevin Shanahan
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1056328
https://bugzilla.redhat.com/show_bug.cgi?id=1034993
SCSI passthrough disks (<disk .. device="lun">) can't be used as backing
for snapshots. Currently with upstream qemu the vm crashes on such
attempt.
This patch adds a early check to catch an attempt to do such a snapshot
and rejects it right away. qemu will fix the issue but this will let us
control the error message.
We shouldn't access the domain definition while we are in the monitor
section as the domain is unlocked. Additionally after we exit from the
monitor we need to check if the VM is still alive. Not doing so resulted
in a crash if qemu exits while attempting to do an external VM snapshot.
spice-server offers an API to disable file transfer messages
on the agent channel between the client and the guest.
This is supported in qemu through the disable-agent-file-xfer option.
This patch exposes this option to libvirt.
Adds a new element 'filetransfer', with one property,
'enable', which accepts a boolean.
Default is enabled, for backward compatibility.
Depends on the capability exported in the first patch of the series.
Signed-off-by: Francesco Romani <fromani@redhat.com>
spice-server offers an API to disable file transfer messages
on the agent channel between the client and the guest.
This is supported in qemu through the disable-agent-file-xfer option.
This patch detects if QEMU supports this option, and add
a capability if does.
Signed-off-by: Francesco Romani <fromani@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1046919
If none (KVM, VFIO) of the supported PCI passthrough methods is known to
work on a host, it's better to fail right away with a nice error message
rather than letting attachment fail with a more cryptic message such as
Failed to bind PCI device '0000:07:05.0' to vfio-pci: No such device
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
With this patch, user can setup throttle blkio cgroup
through virsh for qemu domain.
Signed-off-by: Guan Qiang <hzguanqiang@corp.netease.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
