We do not have a legacy API for listing network ports
so there's nothing to fall back on.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Switch the allocation in virshSnapshotListCollect and
its cargo-culted Checkpoint counterpart to two separate
g_new0 calls and move the boolean expression to
the if condition that chooses between them.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We no longer report any errors so all callers can be replaced by
virBitmapNew. Additionally virBitmapNew can't return NULL now so error
handling is not necessary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
WITH_VIRTUALPORT just checks that we are building on Linux and that
IFLA_PORT_MAX is defined in linux/if_link.h. Back when 802.11Qb[gh]
support was added, the IFLA_* stuff was new (introduced in kernel
2.6.35, backported to RHEL6 2.6.32 kernel at some point), and so this
extra check was necessary, because libvirt was being built on Linux
distros that didn't yet have IFLA_* (e.g. older RHEL6, all
RHEL5). It's been in the kernel for a *very* long time now, so all
supported versions of all Linux platforms libvirt builds on have it.
Note that the above paragraph implies that the conditional compilation
should be changed to #if defined(__linux__). However, the astute
reader will notice that the code in question is sending and receiving
netlink messages, so it really should be conditional on WITH_LIBNL
(which implies __linux__) instead, so that's what this patch does.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
portability: Returning an integer in a function with pointer
return type is not portable. [CastIntegerToAddressAtReturn]
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All of them are in the cleanup section right before the variables
they free go out of scope.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow to filter for CSS devices.
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Make channel subsystem (CSS) devices available in the node_device driver.
The CCS devices reside in the computer system and provide CCW devices, e.g.:
+- css_0_0_003a
|
+- ccw_0_0_1a2b
|
+- scsi_host0
|
+- scsi_target0_0_0
|
+- scsi_0_0_0_0
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Currently this patch works for the commands emulatorpin, iothreadpin and
vcpupin.
Signed-off-by: Lin Ma <lma@suse.de>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit c7151b0 added the completion for VSH_OT_INT options, say '--cellno'
and '--pagesize', So we need to ignore VSH_OT_INT otherwise we get the
incorrect completion.
before:
# virsh freepages --pagesize <TAB><TAB>
--all --cellno 1GiB 2MiB 4KiB
after:
# virsh freepages --pagesize <TAB><TAB>
1GiB 2MiB 4KiB
Signed-off-by: Lin Ma <lma@suse.de>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 3b225256 removed unused VIR_CONNECT_LIST_DOMAINS_* flags, But some
of them will be used in upcoming patches, So add some of them back.
Signed-off-by: Lin Ma <lma@suse.de>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virshDomainFree handles NULL pointers gracefully, so there's no need to
check the pointer before the call.
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The changes for sparse stream support started passing
virshStreamCallbackDataPtr to virshStreamSink
instead of passing a simple file descriptor, but
forgot to adjust all the callers.
Fix it in cmdScreenshot as well.
https://bugzilla.redhat.com/show_bug.cgi?id=1875195
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 9e745a9717
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
A wireshark plugin must declare what major and minor version it
was built with as these are checked when wireshark loads plugins.
On the top of that, we use major + minor + micro to adapt to
changed API between releases. So far, we were getting these
version numbers from wireshark/config.h.
And while most distributions install wireshark/config.h file some
don't. On distros shipping it it's hack^Wsaved during built by
packaging system and installed later. But some distros are not
doing that. At least not for new enough wireshark because as of
wireshark's commit v2.9.0~1273 the ws_version.h is installed
which contains the version macros we need and is installed by
wireshark itself.
But of course, some distros which have new enough wireshark
packaged do not ship ws_version.h and stick to the hack. That is
why we can't simply bump the minimal version and switch to the
new header file. We need a configure check and adopt our code to
deal with both ways. At least for the time being.
Based on Andrea's original patch:
https://www.redhat.com/archives/libvir-list/2020-September/msg00156.html
Closes: https://gitlab.com/libvirt/libvirt/-/issues/74
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Adds new typed param for migration and uses this as a UNIX socket path that
should be used for the NBD part of migration. And also adds virsh support.
Partially resolves: https://bugzilla.redhat.com/1638889
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
As it turned out my previous commits which switched from HAVE_ to
WITH_ and dropped stdarg.h detection were a bit too aggressive.
Because of reasons described in 9ea3424a17 we need to define
HAVE_STDARG_H before including readline otherwise macos build
fails. Honestly, I still don't fully understand the problem so I
am not going to bother you with "explanation".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This allows us to drop include of readline header files from
virsh.c and virt-admin.c because they needed it only because of
the add_history() function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, we are mixing: #if HAVE_BLAH with #if WITH_BLAH.
Things got way better with Pavel's work on meson, but apparently,
mixing these two lead to confusing and easy to miss bugs (see
31fb929eca for instance). While we were forced to use HAVE_
prefix with autotools, we are free to chose our own prefix with
meson and since WITH_ prefix appears to be more popular let's use
it everywhere.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In packet-libvirt.c in wireshark dissector we include rpc/types.h
but guard the include with a condition (that is supposed to be
true if we detected during configure phase that the host system
has the header file). Thing is, it looks like we were never doing
the configure check and thus the file was never included and yet,
the NSS plugin works. Drop the include then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use https: links for websites that support them.
The URIs which are used as namespace identifiers
are left alone.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
It seems wireshark has migrated to gitlab in the meantime.
Point there instead of to the dead svn repo.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
This patch takes care of just the obvious cases: there are
many more situations where the data we pass to configure_file()
could likely be obtained in a more effective way, but we can
address the low-hanging fruits as a first approximation.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When switching to meson, some of HAVE_* macros were renamed to
WITH_ because they did not reflect whether the build platform has
or doesn't have something, but whether we are building with some
functionality turned on or off. This is the case with
HAVE_BSD_NSS macro too. As a result, the NSS plugin built on BSD
did not expose nss_module_register() function which made the
plugin unusable:
https://www.redhat.com/archives/libvir-list/2020-September/msg00000.html
Fixes: c742687055
Reported-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Split those initializations that depend on a statement
above them.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For iscsi-direct pool, the initiator is necessary for pool defining:
<pool type="iscsi-direct">
...
<initiator>
<iqn name="iqn.2013-06.com.example:iscsi-initiator"/>
</initiator>
...
</pool>
Add --source-initiator to fill the initiator iqn for
pool-create-as/pool-define-as subcommands.
https://bugzilla.redhat.com/show_bug.cgi?id=1658082
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is very similar to previous commit.
The virshStreamInData() callback is used by virStreamSparseSendAll()
to detect whether the file the data is read from is in data or hole
section. The SendAll() will then send corresponding type of virStream
message to make server create a hole or write actual data. But the
callback uses virFileInData() even for block devices, which results in
an error. Just like in previous commit, emulate a DATA section
for block devices.
Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1852528
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This callback is called when the server sends us STREAM_HOLE
meaning there is no real data, only zeroes. For regular files
we would just seek() beyond EOF and ftruncate() to create the
hole. But for block devices this won't work. Not only we can't
seek() beyond EOF, and ftruncate() will fail, this approach won't
fill the device with zeroes. We have to do it manually.
Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1852528
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We can't use virFileInData() with block devices, but we can
emulate being in data section all the time (vol-upload case).
Alternatively, we can't just lseek() beyond EOF with block
devices to create a hole, we will have to write zeroes
(vol-download case). But to decide we need to know if the FD we
are reading data from / writing data to is a block device. Store
this information in _virshStreamCallbackData.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These callback will need to know more that the FD they are
working on. Pass the structure that is passed to other stream
callbacks (e.g. virshStreamSource() or virshStreamSourceSkip())
instead of inventing a new one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Right now we're unconditionally adding RPATH information to the
installed binaries and libraries, but that's not always desired.
autotools seem to be smart enough to only include that information
when targeting a non-standard prefix, so most distro packages
don't actually contain it; moreover, both Debian and Fedora have
wiki pages encouraging packagers to avoid setting RPATH:
https://wiki.debian.org/RpathIssuehttps://fedoraproject.org/wiki/RPath_Packaging_Draft
Implement RPATH logic that Does The Right Thing™ in the most
common cases, while still offering users the ability to override
the default behavior if they have specific needs.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The timeout argument for guest-agent-timeout is optional but it did not
have proper default value specified. Also update the virsh man page
accordingly.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In libvirt 6.6 stopping guests with libvirt-guests.sh is broken.
As soon as there is more than one guest one can see
`systemctl stop libvirt-guests` failing and in the log we see:
libvirt-guests.sh[2455]: Running guests on default URI:
libvirt-guests.sh[2457]: /usr/lib/libvirt/libvirt-guests.sh: 120:
local: 2a49cb0f-1ff8-44b5-a61d-806b9e52dae2: bad variable name
libvirt-guests.sh[2462]: no running guests.
That is due do mutliple guests becoming a list of UUIDs. Without
recognizing this as one single string the assignment breaks when using 'local'
(which was recently added in 6.3.0). This is because local is defined as
local [option] [name[=value] ... | - ]
which makes the shell trying handle the further part of the string as
variable names. In the error above that string isn't a valid variable
name triggering the issue that is seen.
This depends on the shell being used. POSIX shells don't have 'local'
specified yet and for the common shells it depends. It worked in bash and
bash-in-POSIX-mode, but for example dash in POSIX mode triggers the issue.
To resolve that 'textify' all assignments that are strings or potentially
can become such lists (even if they are not using the local qualifier).
Fixes: 08071ec0 "tools: variables clean-up in libvirt-guests script"
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
GCC 10 complains about "arg" possibly being a NULL dereference.
Even though it might be a false positive, we can easily avoid it.
Avoiding
../tools/vsh.c: In function ‘vshCommandOptStringReq’:
../tools/vsh.c:1034:19: error: potential null pointer dereference [-Werror=null-dereference]
1034 | else if (!*arg->data && !(arg->def->flags & VSH_OFLAG_EMPTY_OK))
| ~~~^~~~~~
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Both accept a NULL value gracefully and virStringFreeList
does not zero the pointer afterwards, so a straight replace
is safe.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
virLoginShellGetShellArgv was not dereferencing the pointer
to the string list containing the shell parameters from the
config file, thus setting some random number as shargvlen.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 740e4d7052
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
After the split of virsh to multiple files, and the subsequent
split to vsh/virt-admin, there are quite a few leftovers.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The commands daemon-log-filters and daemon-log-outputs
are used both for getting and setting the variables.
But the getter receives an allocated string, which
we do not free.
Use separate variables for the getter and the setter
to get rid of the memory leak and to stop casting
away the const.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Some of libvirt APIs return the number of elements, but we
don't need them, only whether the API failed or not.
Delete the redundant variables.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Although virXPathNodeSet is unlikely to return -1, we should
check for it properly or not at all.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Instead of using environment variables pass the values to the script
as arguments.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Most likely rarely changed with configure option and it is used only
as fallback if there is no VISUAL or EDITOR environment variable.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
There is no point of having this option in libvirt because the debug
logs can be configured using log filters.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
EXTRA_DIST is not relevant because meson makes a git copy when creating
dist archive so everything tracked by git is part of dist tarball.
The remaining ones are not converted to meson files as they are
automatically tracked by meson.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
The switch to GDateTime removed the last use.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 3caa28dc50
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
GCC 10 complains about "desc" possibly being a NULL dereference. Even
though it is a false positive, we can easily avoid it.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With meson introduction which is using the same CFLAGS for the whole
project some compilation errors were discovered. The wireshark plugin
library is the only one in tools directory that is not using AM_CFLAGS.
With the AM_CFLAGS we get these errors:
../../tools/wireshark/src/packet-libvirt.c: In function 'dissect_libvirt_fds':
../../tools/wireshark/src/packet-libvirt.c:348:31: error: unused parameter 'tvb' [-Werror=unused-parameter]
348 | dissect_libvirt_fds(tvbuff_t *tvb, gint start, gint32 nfds)
| ~~~~~~~~~~^~~
../../tools/wireshark/src/packet-libvirt.c:348:41: error: unused parameter 'start' [-Werror=unused-parameter]
348 | dissect_libvirt_fds(tvbuff_t *tvb, gint start, gint32 nfds)
| ~~~~~^~~~~
../../tools/wireshark/src/packet-libvirt.c:348:55: error: unused parameter 'nfds' [-Werror=unused-parameter]
348 | dissect_libvirt_fds(tvbuff_t *tvb, gint start, gint32 nfds)
| ~~~~~~~^~~~
At top level:
../../tools/wireshark/src/packet-libvirt.c:64:5: error: 'dissect_xdr_bool' defined but not used [-Werror=unused-function]
64 | dissect_xdr_##xtype(tvbuff_t *tvb, proto_tree *tree, XDR *xdrs, int hf) \
| ^~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c:88:1: note: in expansion of macro 'XDR_PRIMITIVE_DISSECTOR'
88 | XDR_PRIMITIVE_DISSECTOR(bool, bool_t, boolean)
| ^~~~~~~~~~~~~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c:64:5: error: 'dissect_xdr_float' defined but not used [-Werror=unused-function]
64 | dissect_xdr_##xtype(tvbuff_t *tvb, proto_tree *tree, XDR *xdrs, int hf) \
| ^~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c:86:1: note: in expansion of macro 'XDR_PRIMITIVE_DISSECTOR'
86 | XDR_PRIMITIVE_DISSECTOR(float, gfloat, float)
| ^~~~~~~~~~~~~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c:64:5: error: 'dissect_xdr_short' defined but not used [-Werror=unused-function]
64 | dissect_xdr_##xtype(tvbuff_t *tvb, proto_tree *tree, XDR *xdrs, int hf) \
| ^~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c:80:1: note: in expansion of macro 'XDR_PRIMITIVE_DISSECTOR'
80 | XDR_PRIMITIVE_DISSECTOR(short, gint16, int)
| ^~~~~~~~~~~~~~~~~~~~~~~
../../tools/wireshark/src/packet-libvirt.c: In function 'dissect_libvirt_message':
../../tools/wireshark/src/packet-libvirt.c:423:34: error: null pointer dereference [-Werror=null-dereference]
423 | vir_xdr_dissector_t xd = find_payload_dissector(proc, type, get_program_data(prog, VIR_PROGRAM_DISSECTORS),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
424 | *(gsize *)get_program_data(prog, VIR_PROGRAM_DISSECTORS_LEN));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use g_auto* pointers to avoid the need for the cleanup label. The
type of the pointer 'virDomainPtr dom' was changed to its alias
'virshDomainPtr' to allow the use of g_autoptr().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use g_auto* in the string and in the bitmap. Remove the
cleanup label since it's now unneeded.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The srv-XXX commands were renamed to server-XXX, with the old
name being a undocumented back compat alias only.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Network interfaces are simply attached to a bridge device.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When a block copy job fails prior to reaching the synchronized phase
while we are waiting for the job to finish virsh would print the
following:
$ virsh blockcopy backup-test vda /tmp/dst.qcow2 --wait --reuse-external --transient-job
error:
Copy failed
The above message looks like we've forgot to print the error message
itself as the line ends after 'error:'. Unfortunately with the current
API design clients have no way of actually getting the error message as
the VIR_DOMAIN_EVENT_ID_BLOCK_JOB(_2) event only reports the status but
not an error and the job then vanishes.
Fix the expectations by using vshPrintExtra instead of vshError:
$ virsh blockcopy backup-test vda /tmp/dst.qcow2 --wait --reuse-external --transient-job
Copy failed
Note that the newline is required to avoid printing the 'Copy failed'
message on the same line when printing the job progress percentage.
Inspired by https://bugzilla.redhat.com/show_bug.cgi?id=1847867
Fix the same issue also for block pull and block commit job
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add checking in virt-host-validate for secure guest support
on x86 for AMD Secure Encrypted Virtualization.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Paulo de Rezende Pinatti <ppinatti@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add checking in virt-host-validate for secure guest support
on s390 for IBM Secure Execution.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Reviewed-by: Paulo de Rezende Pinatti <ppinatti@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Compilers are not very good at detecting this problem. Fixed by manual
inspection of compilation warnings after replacing 'VIR_FREE' with an
empty macro.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com
This is convenience macro, use it more. This commit was generated
using the following spatch:
@@
symbol node;
identifier old;
identifier ctxt;
type xmlNodePtr;
@@
- xmlNodePtr old;
+ VIR_XPATH_NODE_AUTORESTORE(ctxt);
...
- old = ctxt->node;
... when != old
- ctxt->node = old;
@@
symbol node;
identifier old;
identifier ctxt;
type xmlNodePtr;
@@
- xmlNodePtr old = ctxt->node;
+ VIR_XPATH_NODE_AUTORESTORE(ctxt);
... when != old
- ctxt->node = old;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This partially reverts fe65e9c8b5.
In the referenced commit I removed @ret from
virHostValidateBhyve() thinking it wasn't used when in fact it is
- it's usage is hidden under MODULE_STATUS_WARN(). Reintroduce
the variable back.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are few places where a return variable is introduced (ret
or retval), but then is never changed and is then passed to
return. Well, we can return the value that the variable is
initialized to directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
After the commit dc0771c, ret variable no longer
represents the status of the return code, use
data->ret replace it.
Signed-off-by: Xu Yandong <xuyandong2@huawei.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In some cases it's useful to report the error which caused the domain
job to fail. Add an optional field for holding the error message so that
it can be later retrieved from statistics of a completed job.
Add the field name macro and code for extracting it in virsh.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When the job monitoring logic was refactored, these two commands
were not converted properly and the result is that a successful
dump or migration (char '0') would be reported as a failed one
(int 48) instead.
Fixes: dc0771cfa2
Reported-by: Brian Rak <brak@gameservers.com>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 86608f787e added the above flag as an alias for ambiguous
'delete-snapshots' flag, but forgot to actually change the code that
extracts it, thus the new version actually doesn't work.
https://bugzilla.redhat.com/show_bug.cgi?id=1821988
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We've adopted reStructuredText as the primary markup language for
our documentation and, given that both GitLab and GitHub can render
documents in this format just fine, it makes sense to get rid of
the few last remaining bits of Markdown and standardize on
reStructuredText across the board.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Redeclared variables in script functions marked as local.
Variables `guest_running` and `guests_shutting_down` in the
functions 'guest_is_on` and `check_guests_shutdown` were
untouched, as the functions returned values in these
variables.
Signed-off-by: Prathamesh Chavan <pc44800@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We're going to add many more later, so start by adjusting the
existing ones to more closely follow the example set by libvirtd.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Unfortunately, yajl_free() is not NOP on NULL. It really does
expect a valid pointer. Therefore, check whether the pointer we
want to pass to it is NULL or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
POWER hosts does not implement CPU virtualization extensions like
x86 or s390x. Instead, all bare-metal POWER hosts are considered
to be virtualization ready.
For POWER, the validation is done by checking if the virtualization
module kvm_hv is loaded in the host. If not, we should warn the
user about it.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
wire-up virAdmServerUpdateTlsFiles API into virt-admin client.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: Wu Qingliang <wuqingliang4@huawei.com>
Use 'g_autoptr' which mandates initialization for 'hostname' and also
for 'domain' to allow full refactor of the cleanup path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Include virutil.h in all files that use it,
instead of relying on it being pulled in somehow.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
After the introduction of virenum.h in commit 285c5f28c4,
it is only needed in the C file.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Historically, this file was a dump for most of our helper
functions and needed almost everywhere.
With the introduction of virfile.h and virstring.h,
and more importantly, virenum.h and the introduction
of GLib, that is no longer true.
Remove its include from C files that don't even use it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Simplify gathering the actual return value from a passed-through QMP
command when using 'qemu-monitor-command' by adding '--return-value'
switch which just extracts the 'return' section and alternatively
reports an error if the section is not present.
This simplifies gathering of some test data where the full reply would
need to be trimmed just for the actual return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This deletes all trace of gnulib from libvirt. We still
have the keycodemapdb submodule to deal with. The simple
solution taken was to update it when running autogen.sh.
Previously gnulib could auto-trigger refresh when running
'make' too. We could figure out a solution for this, but
with the pending meson rewrite it isn't worth worrying
about, given how infrequently keycodemapdb changes.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
For long running jobs (save, managed save, dump & live migrate)
virsh runs a background thread for executing the job and then
has the main thread catch Ctrl-C for graceful shutdown, as well
as displaying progress info.
The monitoring code is written using poll, with a pipe used
to get the completion status from the thread. Using a pipe
and poll is problematic for Windows portability. This rewrites
the code to use a GMainLoop instance for monitoring stdin and
doing progress updates. The use of a pipe is entirely eliminated,
instead there is just a shared variable between both threads
containing the job completion status.
No mutex locking is used because the background thread writes
to the variable only when the main loop is still running,
while the foreground thread only reads it after the main loop
has exited.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Pvpanic device supports bit 1 as crashloaded event, it means that
guest actually panicked and run kexec to handle error by guest side.
Handle crashloaded as a lifecyle event in libvirt.
Test case:
Guest side:
before testing, we need make sure kdump is enabled,
1, build new pvpanic driver (with commit from upstream
e0b9a42735f2672ca2764cfbea6e55a81098d5ba
191941692a3d1b6a9614502b279be062926b70f5)
2, insmod new kmod
3, enable crash_kexec_post_notifiers,
# echo 1 > /sys/module/kernel/parameters/crash_kexec_post_notifiers
4, trigger kernel panic
# echo 1 > /proc/sys/kernel/sysrq
# echo c > /proc/sysrq-trigger
Host side:
1, build new qemu with pvpanic patches (with commit from upstream
600d7b47e8f5085919fd1d1157f25950ea8dbc11
7dc58deea79a343ac3adc5cadb97215086054c86)
2, build libvirt with this patch
3, handle lifecycle event and trigger guest side panic
# virsh event stretch --event lifecycle
event 'lifecycle' for domain stretch: Crashed Crashloaded
events received: 1
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
The O_SYNC flag is not defined on Windows platforms.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This addreses portability to Windows and standardizes
error reporting. This fixes a number of places which
failed to set O_CLOEXEC or failed to report errors.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Always trim the full specified suffix.
All of the callers outside of tests were passing either
strlen or the actual length of the string.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Replace all the cases that only supply the length
and do not care about matching a suffix, as well
as that one test case that does.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
rpmlint complains about "script-without-shebang" due to the execute
permissions on /usr/share/bash-completion/completions/vsh. Use
INSTALL_DATA instead of INSTALL_SCRIPT to avoid the unnecessary
execute permissions.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The Windows platform does not have the signal handling
support we need, so it must be disabled in several parts
of the codebase.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The combination of g_unichar_iszerowidth and
g_unichar_iswide is sufficient to replicate the logic
of wcwidth() for libvirt.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently we rely on gnulib creating configmake.h, but we
can easily create it ourselves instead.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This imports a simpler version of GNULIB's getpass() function
impl for Windows. Note that GNULIB's impl was buggy as it
returned a static string on UNIX, and a heap allocated string
on Windows. This new impl always heap allocates.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Simplify human usage of secret-set-value by adding --interactive which
will read the value of the secret from the terminal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Allow using the contents of --file without base64 decoding.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Print a warning if users pass in secrets as command line arguments and
mention it in the man page.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The necessity to specify the secret value as command argument is
insecure. Allow reading the secret from a file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Users might want to get the raw value instead of dealing with base64
encoding. This might be useful for redirection to file and also for
simple human-readable secrets.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Automatically clean the secret object and get rid of the cleanup label
and 'ret' valiable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Automatically clean the secret object and get rid of the cleanup label
and 'ret' valiable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Similarly to other libvirt object freeing APIs the function resets the
libvirt error when called and doesn't take NULL gracefully. Install the
workaround and g_autoptr handlers similarly to the 'virshDomain' type.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
gmtime_r/localtime_r are mostly used in combination with
strftime to format timestamps in libvirt. This can all
be replaced with GDateTime resulting in simpler code
that is also more portable.
There is some boundary condition problem in parsing POSIX
timezone offsets in GLib which tickles our test suite.
The test suite is hacked to avoid the problem. The upsteam
GLib bug report is
https://gitlab.gnome.org/GNOME/glib/issues/1999
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The GNULIB termios module ensures termios.h exists (but
is none the less empty) when building for Windows. We
already exclude usage of the functions that would exist
in a real termios.h, so having an empty termios.h is
not especially useful.
It is simpler to just put all use of termios.h related
functions behind a "#ifndef WIN32" conditional.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
G_STATIC_ASSERT() is a drop-in functional equivalent of
the GNULIB verify() macro.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce a vastly simpler VIR_INT64_STR_BUFLEN constant
which is large enough for all cases where we currently
use INT_BUFSIZE_BOUND. This eliminates most use of the
gnulib intprops.h header.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Our virsh already has 'domhostname' command. Add '--source'
argument to it so that users can chose between 'lease' and
'agent' sources. Also, implement completer for the argument.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
--tls-destination would be just ignored unless --tls is not specified,
which is correct, but let's provide a bit of a guidance is a user
forgets to add --tls.
This is just a virsh-only check targeted to end users as we don't
currently have such checks at the API level for migration parameters
that depend on flags.
https://bugzilla.redhat.com/show_bug.cgi?id=1784345
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
The 'domifaddr' command accepts several arguments. Let's validate
them first and look up domain to work with only after to save
some RPC cycles should validation fail.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduced in v5.10.0-449-gcf44ec5577 it used
virshCommaStringListComplete() to generate list of options. But
this is not correct because the '--source' argument of the
'domifaddr' doesn't accept a string list (for instance
"arp,agent,lease") rather than a single string. Therefore, the
completer must return these strings separately and thus must
refrain from using virshCommaStringListComplete().
At the same time, now that we have strings we need declared as
an enum we can use TypeToString() instead of copying strings.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are more occurrences, but I'm converting --source argument
of domifaddr command only, because I will need it in next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
commandhelper.c is not converted since this is a standalone
program only run on UNIX, so can rely on getcwd().
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
g_get_real_time() returns the time since epoch in microseconds.
It uses gettimeofday() internally while libvirt used clock_gettime
because it is declared async signal safe. In practice gettimeofday
is also async signal safe *provided* the timezone parameter is
NULL. This is indeed the case in g_get_real_time().
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The g_pattern_match function_simple is an acceptably close
approximation of fnmatch for libvirt's needs.
In contrast to fnmatch(), the '/' character can be matched
by the wildcards, there are no '[...]' character ranges and
'*' and '?' can not be escaped to include them literally in
a pattern.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Eliminate direct use of normal setenv/unsetenv calls in
favour of GLib's wrapper. This eliminates two gnulib
modules
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The command `domifaddr` can use three different sources to grab IP
address of a Virtual Machine: lease, agent and arp. This parameter does
not have a completer function to return source options.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The phyp driver was added in 2009 and does not appear to have had any
real feature change since 2011. There's virtually no evidence online
of users actually using it. IMO it's time to kill it.
This was discussed a bit in April 2016:
https://www.redhat.com/archives/libvir-list/2016-April/msg01060.html
Final discussion is here:
https://www.redhat.com/archives/libvir-list/2019-December/msg01162.html
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
virGetUserCacheDirectory() *never* *ever* returns NULL, making the
checks for it completely unnecessary.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make it clearer that what we're trying to do is find @source and
@target_node so that the unattentive or code analysis utility
doesn't believe 'source' and 'target' could be found in the same
node element.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
My commit e73889b631
split the -Wframe-larger-than warning setting into
two different variables - STRICT_FRAME_LIMIT_CFLAGS
for the library code and RELAXED_FRAME_LIMIT_CFLAGS
which was needed for tests.
Use the strict limit by default and specify the warning
flag twice for the parts that require a larger stack
frame, relying on the fact that the compiler will pick
up the latter value.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This is slightly more complicated because NVMe disk source is not
a simple attribute to <source/> element. The format in which the
PCI address and namespace ID are printed is the same as QEMU
accepts them:
nvme://XXXX:XX:XX.X/X
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
These days libvirt is pretty reliable and even remote connections
(not the default for libvirt-guests anyway) either work or fail but are
uncommon to be flaky.
On the other hand users might have disabled the service and while we are
After=libvirtd for ordering we are not Requiring it. Adding that or any
harder dependency might break our ordering. But if people have disabled
libvirt they will do a full retry loop until timeout.
Lets drop the loop to be much faster if a remote is not reachable.
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1854653
This reverts
commit 4e7fc8305a
Author: Michal Prívozník <mprivozn@redhat.com>
Date: Fri Feb 21 12:46:08 2014 +0100
libvirt-guests: Wait for libvirtd to initialize
The race described in that commit no longer exists using systemd as
we now have socket activation. If not using systemd, then it is also
safe if using the libvirtd --daemon flag, since the parent process
won't return to the caller until the child is accepting connections.
Reported-by: Doug Smythies <dsmythies@telus.net>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Remove the usage where sanity of the length argument is verified
by other conditions not matching the previous patches.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We abort on allocation errors now so there is no need to
have a function for it.
Replace the only use by return -1, chosen by fair dice roll.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This was a semi-automated conversion. First it was run through pod2rst,
and then it was manually editted to use a rst structure that matches
expectations of rst2man.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The stats reported for a blockjob which is member of a domain pull
backup refer to the utilization of the scratch file rather than the
progress of the backup as the progress of the backup depends on the
client. Note this quirk in the docs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
