Multiple tests need to register a function to quiesce errors from
libvirt when using a connection and doing negative tests. Each of those
tests had a static function to do so. This can be replaced by a utility
function that enables the errors when debug is enabled.
This patch adds virtTestQuiesceLibvirtErrors() and refactors test that
use private handlers.
qemu/KVM also supports a tftp URL while specifying the cdrom ISO image.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='tftp' name='/url/path'>
<host name='host.name' port='69'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
The ftps protocol is another protocol supported by qemu/KVM while specifying
the cdrom ISO image.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='ftps' name='/url/path'>
<host name='host.name' port='990'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
The https protocol is also accepted by qemu/KVM when specifying the cdrom ISO
image.
The xml should be as following:
<disk type='network' device='cdrom'>
<source protocol='https' name='/url/path'>
<host name='host.name' port='443'/>
</source>
</disk>
Signed-off-by: Aline Manera <alinefm@br.ibm.com>
Some systems apparently have a global variable/function called remove
and thus break compilation of virsh-domain.c. Rename the variable to
avoid this.
Reported by GuanQiang.
GCC 4.8.0+ whines about variable "new" being uninitialized since
commit 73bfac0e71. This is a false positive as the
xmlFreeNode(new) statement can be only reached if new was actually
allocated successfully.
CC conf/libvirt_conf_la-domain_conf.lo
conf/domain_conf.c: In function 'virDomainDefSetMetadata':
conf/domain_conf.c:18650:24: error: 'new' may be used uninitialized in this function [-Werror=maybe-uninitialized]
xmlFreeNode(new);
Reported independently by John Ferlan and Michal Privoznik.
Commit 073e1575 tried to set things up so that 1) generated files
to be shipped in the tarball always live in srcdir, and 2) we have
no files in SOURCES that depend on any other files with a literal
$(srcdir) in the name, because that situation can cause confusing
results for the make expansion of $@ depending on whether the file
is found locally or via VPATH. But all my testing for that patch
was done incrementally, where all the protocol.[ch] files had
already been generated prior to the patch and were up-to-date in
the srcdir, and thus I missed one case where $@ causes grief in a
VPATH build from a fresh checkout:
We have a pattern rule for generating remote_protocol.[ch], and
what's more, the rule for protocol.c depends on protocol.h AND
on the protocol.x file. The pattern for protocol.c is only
satisfied via the VPATH lookup for protocol.x, and if protocol.h
doesn't yet exist, the VPATH rule kicks in and we end up with a
dependency on a file with $(srcdir) in the name. Based on make's
rules for $@, this resulted in make building remote_protocol.h
into srcdir (where we want it), then remote_protocol.c into
builddir (oops, not so good for the tarball), and also causes
the build to fail (the compiler can't find the .h if it lives
in a different directory than the .c):
CC remote/libvirt_driver_remote_la-remote_protocol.lo
remote/remote_protocol.c:7:29: fatal error: remote_protocol.h: No such file or directory
#include "remote_protocol.h"
^
compilation terminated.
As before, the fix is to hard-code the output file to go into
srcdir in spite of $@; but since this is in a pattern rule, we
are forced to use $@ in the recipe, so the patch is a bit
trickier than what was done in commit 073e1575.
* src/Makefile.am (%protocol.c, %protocol.h): Force output to srcdir.
Signed-off-by: Eric Blake <eblake@redhat.com>
Eric Blake suggested that we could do a little better in case copying of
the metadata to be set fails. With this patch, the old metadata is
discarded after the new string is copied successfuly.
If the ABI compatibility check with the "migratable" user XML is
successful, we would leak the originally parsed XML from the user that
would not be used in this case.
Reported by Ján Tomko.
virDomainSetMetadata when operating on the metadata element was
requesting the @key argument to be passed even if @metadata was NULL
used to delete the corresponding metadata element. This is not needed as
the key is only used when adding the element and matching is done via
the XML namespace.
The virDomainGetMetadata function was designed to support also retrieval
of app specific metadata from the <metadata> element. This functionality
was never implemented originally.
The function implemented common behavior that can be reused for other
hypervisor drivers that use the virDomainObj data structures. Factor out
the core into a separate helper func.
The function implemented common behavior that can be reused for other
hypervisor drivers that use the virDomainObj data structures. Factor out
the core into a separate helper func.
In the original implementation of external checkpoints I've mistakenly
used the live definition to be stored in the save image. The normal
approach is to use the "migratable" definition. This was discovered when
commit 07966f6a8b changed the behavior to
use a converted XML from the user to do the compatibility check to fix
problem when using the regular machine saving.
As the previous patch added a compatibility layer, we can now change the
type of the XML in the image.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1008340
External checkpoints have a bug in the implementation where they use the
normal definition instead of the "migratable" one. This causes errors
when the snapshot is being reverted using the workaround method via
qemuDomainRestoreFlags() with a custom XML. This issue was introduced
when commit 07966f6a8b changed the code to
compare "migratable" XMLs from the user as we should have used
migratable in the image too.
This patch adds a compatibility layer, so that fixing the snapshot code
won't make existing snapshots fail to load.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1008340
CD-ROMs and Floppies are allowed to have no source to imply they are
empty or disconnected. Since the LUN type is used for raw CD-ROM access
with QEMU (and VMWare in the future), it also needs to allow an empty
source when the raw CD-ROM device is disconnected from the domain.
qemuMigrationEatCookie has flags to control if these should
be parsed, but it does not fill mig->flags. These cookies might
get leaked if these flags are not set by qemuMigrationBakeCookie.
42 (32 direct, 10 indirect) bytes in 1 blocks are definitely lost in
loss record 361 of 662
==123== by 0x1BA33FCA: qemuMigrationEatCookie (qemu_migration.c:678)
==123== by 0x1BA34A1E: qemuMigrationRun (qemu_migration.c:3108)
==123== by 0x1BA3622B: doNativeMigrate (qemu_migration.c:3343)
==123== by 0x1BA3B408: qemuMigrationPerform (qemu_migration.c:4138)
https://bugzilla.redhat.com/show_bug.cgi?id=1008619
1,003 bytes in 1 blocks are definitely lost in loss record 599 of 635
==404== by 0x50728A7: virBufferAddChar (virbuffer.c:185)
==404== by 0x50BC466: virSystemdEscapeName (virsystemd.c:67)
==404== by 0x50BC6B2: virSystemdMakeSliceName (virsystemd.c:108)
==404== by 0x50BC870: virSystemdCreateMachine (virsystemd.c:169)
==404== by 0x5078267: virCgroupNewMachine (vircgroup.c:1498)
I spent far too long on a new machine trying to figure out why
./autobuild.sh failed due to an rpm build failure (complaining
that libvirt_parthelper was supposed to be packaged but was not
built), and finally traced it to a missing parted-devel
installation. I learned that --nodeps is in place for
autobuilder setups, but for developers, removing it would make
rpmbuild error out much sooner for a less cryptic failure.
* autobuild.sh: Conditionally drop --nodeps from rpmbuild lines.
Signed-off-by: Eric Blake <eblake@redhat.com>
Bother those kernel developers. In the latest rawhide, kernel
and glibc have now been unified so that <netinet/in.h> and
<linux/in6.h> no longer clash; but <linux/if_bridge.h> is still
not self-contained. Because of the latest header change, the
build is failing with:
checking for linux/param.h... no
configure: error: You must install kernel-headers in order to compile libvirt with QEMU or LXC support
with details:
In file included from conftest.c:561:0:
/usr/include/linux/in6.h:71:18: error: field 'flr_dst' has incomplete type
struct in6_addr flr_dst;
We need a workaround to avoid our workaround :)
* configure.ac (NETINET_LINUX_WORKAROUND): New test.
* src/util/virnetdevbridge.c (includes): Use it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Since the maxvcpus command query the maximum number of virtual
CPUs supported for a guest VM on this connection, it should be
in virsh-host.c but not virsh-domain.c.
Signed-off-by: yangdongsheng <yangds.fnst@cn.fujitsu.com>
Since virnetsocket conditionally uses selinux we need to link against it
otherwise the build fails with:
CCLD libvirtd
/usr/bin/ld: ../src/.libs/libvirt-lxc.so: undefined reference to symbol 'freecon'
/lib/i386-linux-gnu/libselinux.so.1: error adding symbols: DSO missing from command line
collect2: error: ld returned 1 exit status
make[3]: *** [libvirtd] Error 1
An off-list bug report mentioned some confusion where the public
documentation of libvirt.c:virConnectGetHostname did not match
the private documentation of util/virutil.c:virGetHostname.
* src/libvirt.c (virConnectGetHostname): Tweak docs.
Signed-off-by: Eric Blake <eblake@redhat.com>
The VIR_ACCESS_PERM_CONNECT_DETECT_STORAGE_POOLS enum
constant had its string format be 'detect_storage_pool',
note the missing trailing 's'. This prevent the ACL
check from ever succeeding. Fix this and add a simple
test script to validate this problem of matching names.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Right now we mount selinuxfs even user namespace is enabled and
ignore the error. But we shouldn't ignore these errors when user
namespace is not enabled.
This patch skips mounting selinuxfs when user namespace enabled.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
When reverting a live internal snapshot with a live guest the ABI
compatiblity check was comparing a "migratable" definition with a normal
one. This resulted in the check failing with:
revert requires force: Target device address type none does not match source pci
This patch generates a "migratable" definition from the actual one to
check against the definition from the snapshot to avoid this problem.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1006886
This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=983026
The netcf interface driver previously had no state driver associated
with it - as a connection was opened, it would create a new netcf
instance just for that connection, and close it when it was
finished. the problem with this is that each connection to libvirt
used up a netlink socket, and there is a per process maximum of ~1000
netlink sockets.
The solution is to create a state driver to go along with the netcf
driver. The state driver will opens a netcf instance, then all
connections share that same netcf instance, thus only a single
netlink socket will be used no matter how many connections are mde to
libvirtd.
This was rather simple to do - a new virObjectLockable class is
created for the single driverState object, which is created in
netcfStateInitialize and contains the single netcf handle; instead of
creating a new object for each client connection, netcfInterfaceOpen
now just increments the driverState object's reference count and puts
a pointer to it into the connection's privateData. Similarly,
netcfInterfaceClose() just un-refs the driverState object (as does
netcfStateCleanup()), and virNetcfInterfaceDriverStateDispose()
handles closing the netcf instance. Since all the functions already
have locking around them, the static lock functions used by all
functions just needed to be changed to call virObjectLock() and
virObjectUnlock() instead of directly calling the virMutex* functions.
This better fits the modern naming scheme in libvirt, and anticipates
an upcoming change where a single instance of this state will be
maintained by a separate state driver, and every instance of the netcf
driver will share the same state.
If the guest is configured with
<filesystem type='mount'>
<source dir='/'/>
<target dir='/'/>
<readonly/>
</filesystem>
Then any submounts under / should also end up readonly, except
for those setup as basic mounts. eg if the user has /home on a
separate volume, they'd expect /home to be readonly, but we
should not touch the /sys, /proc, etc dirs we setup ourselves.
Users can selectively make sub-mounts read-write again by
simply listing them as new mounts without the <readonly>
flag set
<filesystem type='mount'>
<source dir='/home'/>
<target dir='/home'/>
</filesystem>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the array of basic mounts out of the lxcContainerMountBasicFS
function, to a global variable. This is to allow it to be referenced
by other methods wanting to know what the basic mount paths are.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Describe some of the issues to be aware of when configuring LXC
guests with security isolation as a goal.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
