There is no need to have two different enums where one has the same
values as the other one with some additions.
Currently for on_poweroff and on_reboot we allow only subset of actions
that are allowed for on_crash. This was covered in parse time using
two different enums. Now to make sure that we don't allow setting
actions that are not supported we need to check it while validating
domain config.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1497396
The other APIs accept both, ifname and MAC address. There's no
reason virDomainInterfaceStats can't do the same.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
To handle setting a default heads value. Convert callers that were
doing it by hand
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
At the time the check was written virtuozzo did not use disabled items in boot
order configuration. Boot items were always enabled. Now they can be disabled
as well. Supporting such items is easy - they just should be ignored.
The HOST_NAME_MAX, INET_ADDRSTRLEN and VIR_LOOPBACK_IPV4_ADDR
constants are only used by a handful of files, so are better
kept in virsocketaddr.h or the source file that uses them.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We have to use waitDomainJob instead of waitJob, because of it
unlock the domain until job has finished, so domain will be available
for other clients.
Signed-off-by: Konstantin Neumoin <kneumoin@virtuozzo.com>
There is no "node driver" as there was before, drivers have to do
their own ACL checking anyway, so they all specify their functions and
nodeinfo is basically just extending conf/capablities. Hence moving
the code to src/conf/ is the right way to go.
Also that way we can de-duplicate some code that is in virsysfs and/or
virhostcpu that got duplicated during the virhostcpu.c split. And
Some cleanup is done throughout the changes, like adding the vir*
prefix etc.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Current code for example can call unsubscribe if connection
succeeds but subscribing fails. This will probabaly lead
only to spurious error messages without any actual inconsistencies
but nevertheless.
When we happen to lose a domain but still get a performance event
for it, we should also free the event handle.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
This is necessary to be able to get statistics for venet0 or
"host-routed" adapter, which has -1 index and thus, its statistics
is shown as "net.nic4294967295".
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Because this is invalid xml for containers. This patch almost
reverts 7eda8369, but still skips converting vz sdk bootorder
for containers to libvirt bootorder because we use boot order
in containers for quite different purpurse.
Before, boot devices information for CTs was always empty and we
didn't indicate that containers can boot from disk.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Virtuozzo SDK interface doesn't differ filesystems from disks and sees them as disks.
Before, we always mistakenly presented disks based on files as filesystems, which is
not completely correct. Now we are going to show either disks or filesystems depending
on a hint, which uses boot device section of VZ config. Though this information
doesn't change booting order of a CT, it is used by vz libvirt interface as a hint
for libvirt representation of disks. Since now, if we have filesystems in input xml,
then we add them to VZ booting devices list and rely on this information to show
corresponding libvirt xml.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Implicit devices like controllers are confusing for CTs and
function virDomainDefAddImplicitDevices never intended to be called
for CTs.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
This flag tells backend not to create instance
disks making behavior the same as in qemu driver.
Disk files have to be created beforehand on target
host manually or by upper management layer i.e.
OpenStack Nova.
Signed-off-by: Pavel Glushchak <pglushchak@virtuozzo.com>
This reverts commit 3a6cf6fc16.
Mistakenly this commit was pushed because I thought I missed the
corret one b880ff42ddb while in fact I didn't.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
We have couple of functions that operate over NULL terminated
lits of strings. However, our naming sucks:
virStringJoin
virStringFreeList
virStringFreeListCount
virStringArrayHasString
virStringGetFirstWithPrefix
We can do better:
virStringListJoin
virStringListFree
virStringListFreeCount
virStringListHasString
virStringListGetFirstWithPrefix
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Recently, libprlsdk got a separate flag PNA_BRIDGE corresponding to
type=bridge libvirt network interfaces. Let's use it and get rid of
all workarounds previously added to support it.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Change the virDomainChrDef to use a pointer to 'source' and allocate
that pointer during virDomainChrDefNew.
This has tremendous "fallout" in the rest of the code which mainly
has to change source.$field to source->$field.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Absent driver name attribute is invalid xml. Which in turn makes
unusable 'virsh edit' for example. The value does not make
much sense and ignored on input so nobody will hurt.
vz sdk supports setting serial number only for disk devices.
Getting serial upon cdrom(for example) is error however
setting is just ignored. Let's check for disk device
explicitly for clarity in both cases.
Setting serial number for other devices is ignored
with an info note just as before.
We need usual conversion from "" to NULL in direction
vz sdk -> libvirt, because "" is not valid for libvirt
and "" means unspecifiend in vz sdk which is NULL for libvirt.
Modeled after the qemuDomainHostdevPrivatePtr (commit id '27726d8c'),
create a privateData pointer in the _virDomainChardevDef to allow storage
of private data for a hypervisor in order to at least temporarily store
secret data for usage during qemuBuildCommandLine.
NB: Since the qemu_parse_command (qemuParseCommandLine) code is not
expecting to restore the secret data, there's no need to add code
code to handle this new structure there.
Signed-off-by: John Ferlan <jferlan@redhat.com>
While dettaching/attaching device in OpenStack, nova
calls vzDomainDettachDevice twice, because the update of the internal
configuration of the ct comes a bit latter than the update event.
As the result, we suffer from the second call to dettach the same device.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
The original motivation is to expand API calls like start/stop etc so that
the ACL checks could be added. But this patch has its own befenits.
1. functions like prlsdkStart/Stop use common routine to wait for
job without domain lock. They become more self contained and do
not return intermediate PRL_RESULT.
2. vzDomainManagedSave do not update cache twice.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
If we are going to ignore return value of a functions
that can raise an error, it's not enough to use ignore_value
construction. We should explicitly call virResetLastError
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
First, make function logPrlEventErrorHelper be void and only
print information (if any) from an event.
Second, don't rewrite original error with any errors we get
during parsing event info.
Third, ignore PRL_ERR_NO_DATA at all.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Unfortunately vz sdk do not provide detail information on migration
progress, only progress percentage. Thus vz driver provides percents
instead of bytes in data fields of virDomainJobInfoPtr.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Undefine procedure drops domain lock while waiting for detaching
disks vz sdk call. Meanwhile vz sdk event domain-config-changed
arrives, its handler finds domain and is blocked waiting for job
condition. After undefine API call finishes event processing procedes
and tries to refreshes domain config thru existing vz sdk domain handle.
Domain does not exists anymore and event processing fails. Everything
is fine we just don't want to see error message in log for this
particular case.
Fortunately domain has flag that domain is removed from list. This
also imply that vz sdk domain is also undefined. Thus if we check
for this flag right after domain is locked again on accuiring
job condition we gracefully handle this situation.
Actually the race can happen in other situations too. Any
time we wait for job condition in mutualy exclusive job in
time when we acquire it vz sdk domain can cease to exist.
So instead of general internal error we can return domain
not found which is easier to handle. We don't need to patch
other places in mutually exclusive jobs where domain lock
is dropped as if job is started domain can't be undefine
by mutually exclusive undefine job.
The code of this patch is quite similar to qemu driver checks
for is domain is active after acquiring a job. The difference
only while qemu domain is operational while process is active
vz domain is operational while domain exists.
Current vz driver implementation is not usable when it comes to
long runnig operations. Migration or saving a domain blocks all
other operations even query ones which are expecteted to be available.
This patch addresses this problem.
All vz driver API calls fall into next 3 groups:
1. only query domain cache (virDomainObj, vz cache statistic)
examples are vzDomainGetState, vzDomainGetXMLDesc etc.
2. use thread shared sdkdom object
examples are vzDomainSetMemoryFlags, vzDomainAttachDevice etc.
3. use no thread shared sdkdom object nor domain cache
examples are vzDomainSnapshotListNames, vzDomainSnapshotGetXMLDesc etc
API calls from group 1 don't need to be changed as they hold domain lock only
for short period of time. These calls [1] are easily distinguished. They query
domain object thru libvirt common code or query vz sdk statistics handle thru
vz sdk sync operations.
vzDomainInterfaceStats is the only exception. It uses sdkdom object to
convert interface name to its vz sdk stack index which could not be saved in
domain cache. Interface statistics is available thru this stack index as a key
rather than name. As a result we can have accidental 'not known interface'
errors on quering intrerface stats. The reason is that in the process of
updating domain configuration we drop all devices and then recreate them again
in sdkdom object and domain lock can be dropped meanwhile (to remove networks
for existing bridged interfaces and(or) (re)create new ones). We can fix this
by changing the way we support bridged interfaces or by reordering operations
and changing bridged networks beforehand. Anyway this is better than moving
this API call into 2 group and making it an exclusive job.
As to API calls from group 2, first thread shared sdkdom object needs to be
explained. vz sdk has only one handle for a given domain, thus threads need
exclusive access to operate on it. These calls are fixed to drop and reacquire
domain lock on any lengthy operations - namely waiting the result of async vz
sdk operation. As lock is dropped we need to take extra reference to domain
object if it is not taken already as domain object can be deleted from list
while lock is dropped. As this operations use thread shared sdkdom object, the
simplest way to make calls from group 2 be consistent to each other is to make
them mutually exclusive. This is done by taking/releasing job condition thru
calling correspondent job routine. This approach makes group 1 and group
2 calls consistent to each other too. Not all calls of group 2 change the
domain cache but those that do update it thru prlsdkUpdateDomain which holds
the lock thoughout the update.
API calls from group [2] are easily distinguished too. They use
beginEdit/commit to change domain configuration (vzDomainSetMemoryFlags) or/and
update domain cache from sdkdom at the end of operation (vzDomainSuspend).
There is a known issue however. Frankly speaking it was introduced by ealier
patch '[PATCH 6/9] vz: cleanup loading domain code' from a different series.
The patch significantly reduced amount of time when the driver lock is held when
creating domain from API call or as a result of domain added event from vz sdk.
The problem is these two paths race on using thread shared sdkdom as we don't
have libvirt domain object and can not lock on it. However this don't
invalidates the patch as we can't use the former approach of preadding domain
into the list as we need name at least and name is not given by event. Anyway
i'm against adding half baked object into the list. Eventually this race can be
fixed by extra measures. As to current situation races with different
configurations are unlikely and race when adding domain thru vz driver and
simultaneous event from vz sdk is not dangerous as configuration is the same.
The last group [3] is API calls that need only sdkdom object to make vz sdk
call and don't change thread shared sdkdom object or domain cache in any way.
For now these are mostly domain snapshot API calls. The changes are similar to
those of group 2 - they add extra reference and drop/reacquire the lock on waiting
vz async call result. One can simply take the immutable sdkdom object from the
cache and drop the lock for the rest of operations but the chosen approach
makes implementation of these API calls somewhat similar to those of from group
2 and thus a bit futureproof. As calls of group 3 don't need vz driver
domain/vz sdk cache in any way, they are consistent with respect to API calls from
groups 1 and 3.
There is another exception. Calls to make-snapshot/revert-to-snapshot/migrate
are moved to group 2. That is they are made mutually exclusive. The reason
is that libvirt API supports control/query only for one job per domain and
these are jobs that are likely to be queried/aborted.
Appendix.
[1] API calls that only query domain cache.
(marked [*] are included for a different reason)
.domainLookupByID = vzDomainLookupByID, /* 0.10.0 */
.domainLookupByUUID = vzDomainLookupByUUID, /* 0.10.0 */
.domainLookupByName = vzDomainLookupByName, /* 0.10.0 */
.domainGetOSType = vzDomainGetOSType, /* 0.10.0 */
.domainGetInfo = vzDomainGetInfo, /* 0.10.0 */
.domainGetState = vzDomainGetState, /* 0.10.0 */
.domainGetXMLDesc = vzDomainGetXMLDesc, /* 0.10.0 */
.domainIsPersistent = vzDomainIsPersistent, /* 0.10.0 */
.domainGetAutostart = vzDomainGetAutostart, /* 0.10.0 */
.domainGetVcpus = vzDomainGetVcpus, /* 1.2.6 */
.domainIsActive = vzDomainIsActive, /* 1.2.10 */
.domainIsUpdated = vzDomainIsUpdated, /* 1.2.21 */
.domainGetVcpusFlags = vzDomainGetVcpusFlags, /* 1.2.21 */
.domainGetMaxVcpus = vzDomainGetMaxVcpus, /* 1.2.21 */
.domainHasManagedSaveImage = vzDomainHasManagedSaveImage, /* 1.2.13 */
.domainGetMaxMemory = vzDomainGetMaxMemory, /* 1.2.15 */
.domainBlockStats = vzDomainBlockStats, /* 1.2.17 */
.domainBlockStatsFlags = vzDomainBlockStatsFlags, /* 1.2.17 */
.domainInterfaceStats = vzDomainInterfaceStats, /* 1.2.17 */ [*]
.domainMemoryStats = vzDomainMemoryStats, /* 1.2.17 */
.domainMigrateBegin3Params = vzDomainMigrateBegin3Params, /* 1.3.5 */
.domainMigrateConfirm3Params = vzDomainMigrateConfirm3Params, /* 1.3.5 */
[2] API calls that use thread shared sdkdom object
(marked [*] are included for a different reason)
.domainSuspend = vzDomainSuspend, /* 0.10.0 */
.domainResume = vzDomainResume, /* 0.10.0 */
.domainDestroy = vzDomainDestroy, /* 0.10.0 */
.domainShutdown = vzDomainShutdown, /* 0.10.0 */
.domainCreate = vzDomainCreate, /* 0.10.0 */
.domainCreateWithFlags = vzDomainCreateWithFlags, /* 1.2.10 */
.domainReboot = vzDomainReboot, /* 1.3.0 */
.domainDefineXML = vzDomainDefineXML, /* 0.10.0 */
.domainDefineXMLFlags = vzDomainDefineXMLFlags, /* 1.2.12 */ (update part)
.domainUndefine = vzDomainUndefine, /* 1.2.10 */
.domainAttachDevice = vzDomainAttachDevice, /* 1.2.15 */
.domainAttachDeviceFlags = vzDomainAttachDeviceFlags, /* 1.2.15 */
.domainDetachDevice = vzDomainDetachDevice, /* 1.2.15 */
.domainDetachDeviceFlags = vzDomainDetachDeviceFlags, /* 1.2.15 */
.domainSetUserPassword = vzDomainSetUserPassword, /* 1.3.6 */
.domainManagedSave = vzDomainManagedSave, /* 1.2.14 */
.domainSetMemoryFlags = vzDomainSetMemoryFlags, /* 1.3.4 */
.domainSetMemory = vzDomainSetMemory, /* 1.3.4 */
.domainRevertToSnapshot = vzDomainRevertToSnapshot, /* 1.3.5 */ [*]
.domainSnapshotCreateXML = vzDomainSnapshotCreateXML, /* 1.3.5 */ [*]
.domainMigratePerform3Params = vzDomainMigratePerform3Params, /* 1.3.5 */ [*]
.domainUpdateDeviceFlags = vzDomainUpdateDeviceFlags, /* 2.0.0 */
prlsdkHandleVmConfigEvent
[3] API calls that do not use thread shared sdkdom object
.domainManagedSaveRemove = vzDomainManagedSaveRemove, /* 1.2.14 */
.domainSnapshotNum = vzDomainSnapshotNum, /* 1.3.5 */
.domainSnapshotListNames = vzDomainSnapshotListNames, /* 1.3.5 */
.domainListAllSnapshots = vzDomainListAllSnapshots, /* 1.3.5 */
.domainSnapshotGetXMLDesc = vzDomainSnapshotGetXMLDesc, /* 1.3.5 */
.domainSnapshotNumChildren = vzDomainSnapshotNumChildren, /* 1.3.5 */
.domainSnapshotListChildrenNames = vzDomainSnapshotListChildrenNames, /* 1.3.5 */
.domainSnapshotListAllChildren = vzDomainSnapshotListAllChildren, /* 1.3.5 */
.domainSnapshotLookupByName = vzDomainSnapshotLookupByName, /* 1.3.5 */
.domainHasCurrentSnapshot = vzDomainHasCurrentSnapshot, /* 1.3.5 */
.domainSnapshotGetParent = vzDomainSnapshotGetParent, /* 1.3.5 */
.domainSnapshotCurrent = vzDomainSnapshotCurrent, /* 1.3.5 */
.domainSnapshotIsCurrent = vzDomainSnapshotIsCurrent, /* 1.3.5 */
.domainSnapshotHasMetadata = vzDomainSnapshotHasMetadata, /* 1.3.5 */
.domainSnapshotDelete = vzDomainSnapshotDelete, /* 1.3.5 */
[4] Known issues.
1. accidental errors on getting network statistics
2. race with simultaneous use of thread shared domain object on paths
of adding domain thru API and adding domain on vz sdk domain added event.
sdk domain handle is unique per connection so there is
no sense to query it again if we have it in vzDomObjPtr.
Side effect of prlsdkSdkDomainLookupByUUID is refreshing
domain config is of no use too as PrlVm_BeginEdit do it too.
vz supports only a subset of tcp and udp parameters.
1. tcp type supports only 'raw' protocol.
2. udp type supports only same parameters of 'host' and 'service'
for 'bind' and 'connect'.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
