Commit Graph

12 Commits

Author SHA1 Message Date
Laine Stump
b83d26f6c4 qemu: support ich9-intel-hda audio device
This resolves one of the issues in:

   https://bugzilla.redhat.com/show_bug.cgi?id=1003983

This device is identical to qemu's "intel-hda" device (known as "ich6"
in libvirt), but has a different PCI device ID (which matches the ID
of the hda audio built into the ich9 chipset, of course). It's not
supported in earlier versions of qemu, so it requires a capability
bit.
2013-09-25 10:38:02 -04:00
Cole Robinson
a216e64872 qemu: Set QEMU_AUDIO_DRV=none with -nographic
On my machine, a guest fails to boot if it has a sound card, but not
graphical device/display is configured, because pulseaudio fails to
initialize since it can't access $HOME.

A workaround is removing the audio device, however on ARM boards there
isn't any option to do that, so -nographic always fails.

Set QEMU_AUDIO_DRV=none if no <graphics> are configured. Unfortunately
this has massive test suite fallout.

Add a qemu.conf parameter nographics_allow_host_audio, that if enabled
will pass through QEMU_AUDIO_DRV from sysconfig (similar to
vnc_allow_host_audio)
2013-09-02 16:53:39 -04:00
Vladislav Bogdanov
81af5336ac qemu: pass -usb and usb hubs earlier, so USB disks with static address are handled properly 2012-10-30 08:54:32 +01:00
Marc-André Lureau
d9a269bc74 tests: add ich6 codec type test to qemuxml2argv-sound-device
Test new codec type element.
2012-05-17 11:43:35 -06:00
Eric Blake
25b39315d6 tests: fix recent test failures
* tests/qemuxml2argvdata/qemuxml2argv-*.args: Reflect reserved VGA
port change.
2011-04-06 10:05:14 -06:00
Juerg Haefliger
bd6c46fa0c tests: handle backspace-newline pairs in test input files
This patch teaches testutil how to read multi-line input files with
backspace-newline line continuation markers.

The patch also breaks up all the single-line arguments test input files into
multi-line files with lines shorter than 80 characters.
2011-01-31 11:25:34 -07:00
Cole Robinson
6cabc0b0d0 qemu: sound: Support intel 'ich6' model
In QEMU, the card itself is a PCI device, but it requires a codec
(either -device hda-output or -device hda-duplex) to actually output
sound. Specifying <sound model='ich6'/> gives us -device intel-hda
-device hda-duplex I think it's important that a simple <sound model='ich6'/>
sets up a useful codec, to have consistent behavior with all other sound cards.

This is basically Dan's proposal of

    <sound model='ich6'>
        <codec type='output' slot='0'/>
        <codec type='duplex' slot='3'/>
    </sound>

without the codec bits implemented.

The important thing is to keep a consistent API here, we don't want some
<sound> devs require tweaking codecs but not others. Steps I see to
accomplishing this:

    - every <sound> device has a <codec type='default'/> (unless codecs are
        manually specified)
    - <codec type='none'/> is required to specify 'no codecs'
    - new audio settings like mic=on|off could then be exposed in
        <sound> or <codec> in a consistent manner for all sound models

v2:
    Use model='ich6'

v3:
    Use feature detection, from eblake
    Set codec id, bus, and cad values

v4:
    intel-hda isn't supported if -device isn't available

v5:
    Comment spelling fixes
2011-01-24 13:11:52 -05:00
Daniel P. Berrange
0e308c2c9f Re-arrange PCI device address assignment to match QEMU's default
To try and ensure that people upgrading from old QEMU get guests
with the same PCI device ordering, change the way we assign addrs
to match QEMU's default order. This should make Windows less
annoyed.

* src/qemu/qemu_conf.c: Follow QEMU's default PCI ordering
  logic when assigning addresses
* tests/*.args: Update for changed PCI addresses
2010-07-21 11:35:21 +01:00
Daniel P. Berrange
f310b25341 Add '-nodefconfig' command line arg to QEMU
We already use the '-nodefaults' command line arg with QEMU to stop
it adding any default devices to guests. Unfortunately, QEMU will
load global config files from /etc/qemu that may also add default
devices. These aren't blocked by '-nodefaults', so we need to also
add the '-nodefconfig' arg to prevent that.

Unfortunately these global config files are also used to define
custom CPU models. So in blocking global hardware device addition
we also block definitions of new CPU models. Libvirt doesn't know
about these custom CPU models though, so it would never make use
of them anyway. Thus blocking them via -nodefconfig isn't a show
stopping problem. We would need to expand libvirt's own CPU model
XML database to support these instead.

* src/qemu/qemu_conf.c: Add '-nodefconfig' if available
* tests/qemuxml2argvdata/: Add '-nodefconfig' to all data files which
  have '-nodefaults' present
2010-06-23 14:08:05 +01:00
Daniel P. Berrange
b66924148a Convert VirtIO balloon over to -device syntax
Replace

   -balloon virtio

With

   -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3

This allows it to get correct assigned PCI address as declared in
previous patch

 * src/qemu/qemu_conf.c: Convert Virtio ballon to -device and
   give it an explicit PCI address
 * tests/qemuxml2argvdata/qemuxml2argv-*args: Add in virtio balloon
   where appropriate
2010-01-18 13:55:57 +00:00
Daniel P. Berrange
a44d0dc26c Auto-assign PCI addresses
Instead of relying on QEMU to assign PCI addresses and then querying
them with 'info pci', manually assign all PCI addresses before starting
the guest.  These addresses are not stable across reboots. That will
come in a later patch

NB, the PIIX3 (IDE, FDC, ISA-Bridge) will always have slot 1 and
VGA will always have slot 2. We declare the Virtio Balloon gets
slot 3, and then all remaining slots are for configured devices.

* src/qemu/qemu_conf.c: If -device is supported, then assign all PCI
  addresses when building the command line
* src/qemu/qemu_driver.c: Don't query monitor for PCI addresses if
  they have already been assigned
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address-device.args,
  tests/qemuxml2argvdata/qemuxml2argv-net-virtio-device.args,
  tests/qemuxml2argvdata/qemuxml2argv-sound-device.args,
  tests/qemuxml2argvdata/qemuxml2argv-watchdog-device.args: Update
  to include PCI slot/bus information
2010-01-18 13:55:57 +00:00
Daniel P. Berrange
4886cba76a Convert audio devices over to -device syntax
The current syntax for audio devices is a horrible multiplexed
arg

    -soundhw sb16,pcspk,ac97

The new syntax is

    -device sb16,id=sound0

or

    -device AC97,id=sound1,addr=<PCI SLOT>

NB, pcspk still uses the old -soundhw syntax
2010-01-18 13:55:56 +00:00