With QEMU >= 0.12 the host and guest side of disks no longer have
the same naming convention. Specifically the host side will now
get a 'drive-' prefix added to its name. The 'info blockstats'
monitor command returns the host side name, so it is neccessary
to strip this off when looking up stats since libvirt stores the
guest side name !
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Move 'drive-' prefix
string to a defined constant
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Strip
off 'drive-' prefix (if found) when looking up disk stats
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in cpu_conf.{h,c} and update all callers to
match
The QEMU flags are commonly stored as a signed or unsigned int,
allowing only 31 flags. This limit is rather close, so to aid
future patches, change it to a 64-bit int
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c,
tests/qemuargv2xmltest.c, tests/qemuhelptest.c, tests/qemuxml2argvtest.c:
Use 'unsigned long long' for QEMU flags
When restoring from a saved guest image, the XML would already
contain the PCI slot ID of the IDE controller & video card.
The attempt to explicitly reserve this upfront would thus fail
everytime.
* src/qemu/qemu_conf.c: Reserve IDE controller / video card
slot at time of need, rather than upfront
To allow devices to be hot(un-)plugged it is neccessary to ensure
they all have a unique device aliases. This fixes the hotplug
methods to assign device aliases before invoking the monitor
commands which need them
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Expose methods
for assigning device aliases for disks, host devices and
controllers
* src/qemu/qemu_driver.c: Assign device aliases when hotplugging
all types of device
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address-device.args,
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address-device.args:
Update for changed hostdev naming scheme
This patch re-arranges the QEMU device alias assignment code to
make it easier to call into the same codeblock when performing
device hotplug. The new code has the ability to skip over already
assigned names to facilitate hotplug
* src/qemu/qemu_driver.c: Call qemuAssignDeviceNetAlias()
instead of qemuAssignNetNames
* src/qemu/qemu_conf.h: Export qemuAssignDeviceNetAlias()
instead of qemuAssignNetNames
* src/qemu/qemu_driver.c: Merge the legacy disk/network alias
assignment code into the main methods
The current way of assigning names to the host network backend and
NIC device in QEMU was over complicated, by varying naming scheme
based on the NIC model and backend type. This simplifies the naming
to simply be 'net0' and 'hostnet0', allowing code to easily determine
the host network name and vlan based off the primary device alias
name 'net0'. This in turn allows removal of alot of QEMU specific
code from the XML parser, and makes it easier to assign new unique
names for NICs that are hotplugged
* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove hostnet_name
and vlan fields from virNetworkDefPtr
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c:
Use a single network alias naming scheme regardless of NIC type
or backend type. Determine VLANs from the alias name.
* tests/qemuxml2argvdata/qemuxml2argv-net-eth-names.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-device.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.args: Update
for new simpler naming scheme
The QEMU 0.12.x tree has the -netdev command line argument, but not
corresponding monitor command. We can't enable the former, without
the latter since it will break hotplug/unplug.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Disable -netdev usage
until 0.13 at earliest
* tests/qemuxml2argvtest.c: Add test for -netdev syntax
* tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-netdev.xml: Test
data files for -netdev syntax
PCI disk, disk controllers, net devices and host devices need to
have PCI addresses assigned before they are hot-plugged
* src/qemu/qemu_conf.c: Add APIs for ensuring a device has an
address and releasing unused addresses
* src/qemu/qemu_driver.c: Ensure all devices have addresses
when hotplugging.
The current QEMU code allocates PCI addresses incrementally starting
at 4. This is not satisfactory because the user may have given some
addresses in their XML config, which need to be skipped over when
allocating addresses to remaining devices.
It is thus neccessary to maintain a list of already allocated PCI
addresses and then only allocate ones that remain unused. This is
also required for domain device hotplug to work properly later.
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add APIs for creating
list of existing PCI addresses, and allocating new addresses.
Refactor address assignment to use this code
* src/qemu/qemu_driver.c: Pull PCI address assignment up into the
qemuStartVMDaemon() method, as a prelude to moving it into the
'define' method. Update list of allocated addresses when connecting
to a running VM at daemon startup.
* tests/qemuxml2argvtest.c, tests/qemuargv2xmltest.c,
tests/qemuxml2xmltest.c: Remove USB product test since all
passthrough is done based on address
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.args,
tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml: Kil
unused data files
To allow for better code reuse from hotplug methods, the code for
generating PCI/USB hostdev arg values is split out into separate
methods
* qemu/qemu_conf.h, qemu/qemu_conf.c: Introduce new APis for
qemuBuildPCIHostdevPCIDevStr, qemuBuildUSBHostdevUsbDevStr
and qemuBuildUSBHostdevDevStr
All the helper functions for building command line arguments
now return a 'char *', instead of acepting a 'char **' or
virBufferPtr argument
* qemu/qemu_conf.c: Standardize syntax for building args
* qemu/qemu_conf.h: Export all functions for building args
* qemu/qemu_driver.c: Update for changed syntax for building
NIC/hostnet args
The QEMU driver contained code to generate a -device string for piix4-ide, but
wasn't using it. This change removes this string generation. It also adds a
comment explaining why IDE and FDC controllers don't generate -device strings.
The change also generates an error if a sata controller is specified for a QEMU
domain, as this isn't supported.
* src/qemu/qemu_conf.c: Remove VIR_DOMAIN_CONTROLLER_TYPE_IDE handler in
qemuBuildControllerDevStr(). Ignore IDE and FDC controllers. Error if
SATA controller is discovered. Add comments.
On RHEL-5 the qemu-kvm binary is located in /usr/libexec.
To reduce confusion for people trying to run upstream libvirt
on RHEL-5 machines, make the qemu driver look in /usr/libexec
for the qemu-kvm binary.
To make this work, I modified virFindFileInPath to handle an
absolute path correctly. I also ran into an issue where
NULL was sometimes being passed for the file parameter
to virFindFileInPath; it didn't crash prior to this patch
since it was building paths like /usr/bin/(null). This
is non-standard behavior, though, so I added a NULL
check at the beginning.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Add the ability to turn off dynamic management of file permissions
for libvirt guests.
* qemu/libvirtd_qemu.aug: Support 'dynamic_ownership' flag
* qemu/qemu.conf: Document 'dynamic_ownership' flag.
* qemu/qemu_conf.c: Load 'dynamic_ownership' flag
* qemu/test_libvirtd_qemu.aug: Test 'dynamic_ownership' flag
The test expected all environment variables copied in qemudBuildCommandLine
to have known values. So all of them have to be either set to a known value
or be unset. SDL_VIDEODRIVER and QEMU_AUDIO_DRV are not handled at all but
should be handled. Unset both, otherwise the test will fail if they are set
in the testing environment.
* src/qemu/qemu_conf.c: add a comment about copied environment variables
and qemuxml2argvtest
* tests/qemuxml2argvtest.c: unset SDL_VIDEODRIVER and QEMU_AUDIO_DRV
QEMU's command line equivalent for the following domain XML fragment
<vcpus>2</vcpus>
<cpu ...>
...
<topology sockets='1' cores='2', threads='1'/>
</cpu>
is
-smp 2,sockets=1,cores=2,threads=1
This syntax was introduced in QEMU-0.12.
Version 2 changes:
- -smp argument build split into a separate function
- always add ",sockets=S,cores=C,threads=T" to -smp if qemu supports it
- use qemuParseCommandLineKeywords for command line parsing
Version 3 changes:
- ADD_ARG_LIT => ADD_ARG and line reordering in qemudBuildCommandLine
- rebased
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Current version expects name=value,... list and when an incorrect string
such as "a,b,c=d" would be parsed as "a,b,c" keyword with "d" value
without reporting any error, which is probably not the expected
behavior.
This patch adds an extra argument called allowEmptyValue, which if
non-zero will permit keywords with no value; "a,b=c,,d=" will be parsed
as follows:
keyword value
"a" NULL
"b" "c"
"" NULL
"d" ""
In case allowEmptyValue is zero, the string is required to contain
name=value pairs only; retvalues is guaranteed to contain non-NULL
pointers. Now, "a,b,c=d" will result in an error.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Replace
-balloon virtio
With
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
This allows it to get correct assigned PCI address as declared in
previous patch
* src/qemu/qemu_conf.c: Convert Virtio ballon to -device and
give it an explicit PCI address
* tests/qemuxml2argvdata/qemuxml2argv-*args: Add in virtio balloon
where appropriate
Instead of relying on QEMU to assign PCI addresses and then querying
them with 'info pci', manually assign all PCI addresses before starting
the guest. These addresses are not stable across reboots. That will
come in a later patch
NB, the PIIX3 (IDE, FDC, ISA-Bridge) will always have slot 1 and
VGA will always have slot 2. We declare the Virtio Balloon gets
slot 3, and then all remaining slots are for configured devices.
* src/qemu/qemu_conf.c: If -device is supported, then assign all PCI
addresses when building the command line
* src/qemu/qemu_driver.c: Don't query monitor for PCI addresses if
they have already been assigned
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address-device.args,
tests/qemuxml2argvdata/qemuxml2argv-net-virtio-device.args,
tests/qemuxml2argvdata/qemuxml2argv-sound-device.args,
tests/qemuxml2argvdata/qemuxml2argv-watchdog-device.args: Update
to include PCI slot/bus information
QEMU always configures a VGA card. If no video card is included in
the libvirt XML, it is neccessary to explicitly turn off the default
using -vga none
* src/qemu/qemu_conf.c: Pass -vga none if no video card is configured
* tests/qemuargv2xmltest.c, tests/qemuxml2argvtest.c: Test for
handling -vga none.
* tests/qemuxml2argvdata/qemuxml2argv-nographics-vga.args,
tests/qemuxml2argvdata/qemuxml2argv-nographics-vga.xml: Test
data files
Not all QEMU builds default to SDL graphics for their display.
Newer QEMU now has an explicit -sdl flag, which we can use to
explicitly request SDL intead of relying on the default. This
protects libvirt against unexpected changes in graphics default
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Probe for -sdl
flag and use it if it is found
* tests/qemuhelptest.c: Add SDL flag to tests
The old syntax was
-chardev SOMECONFIG
-nic user,guestfwd=tcp:IP:PORT-chardev:CHARDEV
The new syntax is
-chardev SOMECONFIG
-netdev user,guestfwd=tcp:IP:PORT,chardev=ID,id=user-ID
The old syntax was
-usbdevice host:PRODUCT:VENDOR
Or
-usbdevice host:BUS.DEV
The new syntax is
-device usb-host,product=PRODUCT,vendor=VENDOR
Or
-device usb-host,hostbus=BUS,hostaddr=DEV
The previous syntax was severely limited in its options
-usbdevice disk:/home/berrange/output.img
The new syntax is the same as for other disk types
-drive file=/home/berrange/output.img,if=none,id=usb-1,index=1
-device usb-storage,drive=usb-1
Again, the index= arg is wrong here, and will be removed in a
later merge
The current syntax uses a pair of args
-net nic,macaddr=52:54:00:56:6c:55,vlan=3,model=pcnet,name=pcnet.0
-net user,vlan=3,name=user.0
The new syntax does not need the vlan craziness anymore, and
so has a simplified pair of args
-netdev user,id=user.0
-device pcnet,netdev=user.0,id=pcnet.0,mac=52:54:00:56:6c:55,addr=<PCI SLOT>
The current preferred syntax for disk drives uses
-drive file=/vms/plain.qcow,if=virtio,index=0,boot=on,format=qcow
The new syntax splits this up into a pair of linked args
-drive file=/vms/plain.qcow,if=none,id=drive-virtio-0,format=qcow2
-device virtio-blk-pci,drive=drive-virtio-0,id=virtio-0,addr=<PCI SLOT>
SCSI/IDE devices also get a bus property linking them to the
controller
-device scsi-disk,drive=drive-scsi0-0-0,id=scsi0-0-0,bus=scsi0.0,scsi-id=0
-device ide-drive,drive=drive-ide0-0-0,id=ide0-0-0,bus=ide0,unit=0
The current syntax for audio devices is a horrible multiplexed
arg
-soundhw sb16,pcspk,ac97
The new syntax is
-device sb16,id=sound0
or
-device AC97,id=sound1,addr=<PCI SLOT>
NB, pcspk still uses the old -soundhw syntax
The current character device syntax uses either
-serial tty,path=/dev/ttyS2
Or
-chardev tty,id=serial0,path=/dev/ttyS2 -serial chardev:serial0
With the new -device support, we now prefer
-chardev file,id=serial0,path=/tmp/serial.log -device isa-serial,chardev=serial0
This patch changes the existing -chardev syntax to use this new
scheme, and fallbacks to the old plain -serial syntax for old
QEMU.
The monitor device changes to
-chardev socket,id=monitor,path=/tmp/test-monitor,server,nowait -mon chardev=monitor
In addition, this patch adds --nodefaults, which kills off the
default serial, parallel, vga and nic devices. THis avoids the
need for us to explicitly turn each off
When starting a guest, give every device a unique alias. This will
be used for the 'id' parameter in -device args in later patches.
It can also be used to uniquely identify devices in the monitor
For old QEMU without -device, assign disk names based on QEMU's
historical naming scheme.
* src/qemu/qemu_conf.c: Assign unique device aliases
* src/qemu/qemu_driver.c: Remove obsolete qemudDiskDeviceName
and use the device alias in eject & blockstats commands
Probe for the new -device flag and if available set the -nodefaults
flag, instead of using -net none, -serial none or -parallel none.
Other device types will be converted to use -device in later patches.
The -nodefaults flag will help avoid unwelcome surprises from future
QEMU releases
* src/qemu/qemu_conf.c: Probe for -device. Add -nodefaults flag.
Remove -net none, -serial none or -parallel none
* src/qemu/qemu_conf.h: Define QEMU_CMD_FLAG_DEVICE
* tests/qemuhelpdata/qemu-0.12.1: New data file for 0.12.1 QEMU
* tests/qemuhelptest.c: Test feature extraction from 0.12.1 QEMU
This patch introduces the support for giving all devices a short,
unique name, henceforth known as a 'device alias'. These aliases
are not set by the end user, instead being assigned by the hypervisor
if it decides it want to support this concept.
The QEMU driver sets them whenever using the -device arg syntax
and uses them for improved hotplug/hotunplug. it is the intent
that other APIs (block / interface stats & device hotplug) be
able to accept device alias names in the future.
The XML syntax is
<alias name="video0"/>
This may appear in any type of device that supports device info.
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add a 'alias'
field to virDomainDeviceInfo struct & parse/format it in XML
* src/libvirt_private.syms: Export virDomainDefClearDeviceAliases
* src/qemu/qemu_conf.c: Replace use of "nic_name" field with the
standard device alias
* src/qemu/qemu_driver.c: Clear device aliases at shutdown
Existing applications using libvirt are not aware of the disk
controller concept. Thus, after parsing the <disk> definitions
in the XML, it is neccessary to create <controller> elements
to satisfy all requested disks, as per their defined drive
addresses
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/libvirt_private.syms: Add virDomainDefAddDiskControllers()
method for populating disk controllers, and call it after
parsing disk definitions.
* src/qemu/qemu_conf.c: Call virDomainDefAddDiskControllers()
when doing ARGV -> XML conversion
* tests/qemuxml2argvdata/qemuxml2argv*.xml: Add disk controller
data to all data files which don't have it already
The current code for using -drive simply sets the -drive 'index'
parameter. QEMU internally converts this to bus/unit depending
on the type of drive. This does not give us precise control over
the bus/unit assignment though. This change switches over to make
libvirt explicitly calculate the bus/unit number.
In addition bus/unit/index are actually irrelevant for VirtIO
disks, since each virtio disk is a separate PCI device. No disk
controller is involved.
Doing the conversion to bus/unit in libvirt allows us to correctly
attach SCSI controllers when required.
* src/qemu/qemu_conf.c: Specify bus/unit instead of index for
disks
* tests/qemuxml2argvdata/qemuxml2argv-disk*.args: Switch over from
using index=NNNN, to bus=NN, unit=NN for SCSI/IDE/Floppy disks
To enable it to be called from multiple locations, split out
the code for building the -drive arg string. This will be needed
by later patches which do drive hotplug, the conversion to use
-device, and the conversion to controller/bus/unit addressing
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add qemuBuildDriveStr
for building -drive arg string
When parsing the <disk> element specification, if no <address>
is provided for the disk, then automatically assign one based on
the <target dev='sdXX'/> device name. This provides for backwards
compatability with existing applications using libvirt, while also
allowing new apps to have complete fine grained control.
* src/conf/domain_conf.h, src/conf/domain_conf.c,
src/libvirt_private.syms: Add virDomainDiskDefAssignAddress()
for assigning a controller/bus/unit address based on disk target
* src/qemu/qemu_conf.c: Call virDomainDiskDefAssignAddress() after
generating XML from ARGV
* tests/qemuxml2argvdata/*.xml: Add in drive address information
to all XML files
The -mem-prealloc flag should be used when using large pages
This ensures qemu tries to allocate all required memory immediately,
rather than when first used. The latter mode will crash qemu
if hugepages aren't available when accessed, while the former
should gracefully fallback to non-hugepages.
* src/qemu/qemu_conf.c: add -mem-prealloc flag to qemu command line
when using large pages
The behavior for the qemu balloon device has changed. Formerly, a virtio
balloon device was provided by default. Now, '-balloon virtio' must be
specified on the command line to enable it. This patch causes libvirt to
add '-balloon virtio' to the command line whenever the -balloon option is
available.
* src/qemu/qemu_conf.c src/qemu/qemu_conf.h: check for the new flag and
add "-baloon vitio" to qemu command when needed
* tests/qemuhelptest.c: add the new flag for detection
* src/qemu/qemu_conf.h: Remove QEMU_CMD_FLAG_0_12 and just leave
the lone JSON flag
* src/qemu/qemu_conf.c: Enable JSON on QEMU 0.13 or later, but
leave it disabled for now
Change -monitor, -serial and -parallel output to use -chardev if it is
available.
* src/qemu/qemu_conf.c: Update qemudBuildCommandLine to use -chardev where
available.
* tests/qemuxml2argvtest.c tests/qemuxml2argvdata/: Add -chardev equivalents
for all current serial and parallel tests.
Replace free(virBufferContentAndReset()) with virBufferFreeAndReset().
Update documentation and replace all remaining calls to free() with
calls to VIR_FREE(). Also add missing calls to virBufferFreeAndReset()
and virReportOOMError() in OOM error cases.
Initial support for the new QEMU monitor protocol using JSON
as the data encoding format instead of plain text
* po/POTFILES.in: Add src/qemu/qemu_monitor_json.c
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Hack to turn on QMP
mode. Replace with a version number check on >= 0.12 later
* src/qemu/qemu_monitor.c: Delegate to json monitor if enabled
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
impl of QMP protocol
* src/Makefile.am: Add src/qemu/qemu_monitor_json.{c,h}
Introduce a new type="dir" mode for <disks> that allows use of
QEMU's virtual FAT block device driver. eg
<disk type='dir' device='floppy'>
<source dir='/tmp/test'/>
<target dev='fda' bus='fdc'/>
<readonly/>
</disk>
gets turned into
-drive file=fat:floppy:/tmp/test,if=floppy,index=0
Only read-only disks are supported with virtual FAT mode
* src/conf/domain_conf.c, src/conf/domain_conf.h: Add type="dir"
* docs/schemas/domain.rng: Document new disk type
* src/xen/xend_internal.c, src/xen/xm_internal.c: Raise error for
unsupported disk types
* tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom-empty.args: Fix
empty disk file handling
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.args,
tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.xml,
tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.args,
tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.xml
tests/qemuxml2argvtest.c: Test QEMU vitual FAT driver
* src/qemu/qemu_conf.c: Support generating fat:/some/dir type
disk args
* src/security/security_selinux.c: Temporarily skip labelling
of directory based disks
Recent qemu releases require command option '-enable-qemu' in order
for the kvm functionality be activated. Libvirt needs to pass this flag
to qemu when starting a domain. Note that without the option,
even if both the kernel and qemu support KVM, KVM will not be activated
and VMs will be very slow.
* src/qemu/qemu_conf.h src/qemu/qemu_conf.c: parse the extra command
line option from help and add it when running kvm
* tests/qemuhelptest.c: this modified the flags output for qemu-0.10.5
and qemu-kvm-0.11.0-rc2 regression tests
* src/conf/domain_conf.h src/conf/domain_conf.c: add the new entry in
the enum and lists of virDomainDiskBus
* src/qemu/qemu_conf.c: same for virDomainDiskQEMUBus
allows the following to be specified in a domain:
<channel type='pipe'>
<source path='/tmp/guestfwd'/>
<target type='guestfwd' address='10.0.2.1' port='4600'/>
</channel>
* proxy/Makefile.am: add network.c as dep of domain_conf.c
* docs/schemas/domain.rng src/conf/domain_conf.[ch]: extend the domain
schemas and the parsing/serialization side for the new construct
QEmu support will add the following on the qemu command line:
-chardev pipe,id=channel0,path=/tmp/guestfwd
-net user,guestfwd=tcp:10.0.2.1:4600-chardev:channel0
* src/qemu/qemu_conf.c: Add argument output for channel
* tests/qemuxml2(argv|xml)test.c: Add test for <channel> domain syntax
A character device's target (it's interface in the guest) had only a
single property: port. This patch is in preparation for adding targets
which require other properties.
Since this changes the conf type for character devices this affects
a number of drivers:
* src/conf/domain_conf.[ch] src/esx/esx_vmx.c src/qemu/qemu_conf.c
src/qemu/qemu_driver.c src/uml/uml_conf.c src/uml/uml_driver.c
src/vbox/vbox_tmpl.c src/xen/xend_internal.c src/xen/xm_internal.c:
target properties are moved into a union in virDomainChrDef, and a
targetType field is added to identify which union member should be
used. All current code which touches a virDomainChrDef is updated both
to use the new union field, and to populate targetType if necessary.
* src/qemu/qemu.conf src/qemu/qemu_conf.c src/qemu/qemu_conf.h: there is
a new config type option for mac filtering
* src/qemu/qemu_bridge_filter.[ch]: new module for the ebtable entry points
* src/qemu/qemu_driver.c: plug the MAC filtering at the right places
in the domain life cycle
* src/Makefile.am po/POTFILES.in: add the new module
- Don't duplicate SystemError
- Use proper error code in domain_conf
- Fix a broken error call in qemu_conf
- Don't use VIR_ERR_ERROR in security driver (isn't a valid code in this case)
Nearly all of the methods in src/util/util.h have error codes that
must be checked by the caller to correct detect & report failure.
Add ATTRIBUTE_RETURN_CHECK to ensure compile time validation of
this
* daemon/libvirtd.c: Add explicit check on return value of virAsprintf
* src/conf/domain_conf.c: Add missing check on virParseMacAddr return
value status & report error
* src/network/bridge_driver.c: Add missing OOM check on virAsprintf
and report error
* src/qemu/qemu_conf.c: Add missing check on virParseMacAddr return
value status & report error
* src/security/security_selinux.c: Remove call to virRandomInitialize
that's done in libvirt.c already
* src/storage/storage_backend_logical.c: Add check & log on virRun
return status
* src/util/util.c: Add missing checks on virAsprintf/Run status
* src/util/util.h: Annotate all methods with ATTRIBUTE_RETURN_CHECK
if they return an error status code
* src/vbox/vbox_tmpl.c: Add missing check on virParseMacAddr
* src/xen/xm_internal.c: Add missing checks on virAsprintf
* tests/qemuargv2xmltest.c: Remove bogus call to virRandomInitialize()
If the the qemu and kvm binaries are the same, we don't include machine
types in the kvm domain info.
However, the code which refreshes the machine types info from the
previous capabilities structure first looks at the kvm domain's info,
finds it matches and then copies the empty machine types list over
for the top-level qemu domain.
That doesn't make sense, we shouldn't copy an empty machin types list.
* src/qemu/qemu_conf.c: qemudGetOldMachinesFromInfo(): don't copy an
empty machine types list.
When using VNC for graphics + keyboard + mouse, we shouldn't
then use the host OS for audio. Audio should go back over
VNC.
When using SDL for graphics, we should use the host OS for
audio since that's where the display is. We need to allow
certain QEMU env variables to be passed through to guest
too to allow choice of QEMU audio backend.
* qemud/libvirtd.sysconf: Mention QEMU/SDL audio env vars
* src/qemu_conf.c: Passthrough QEMU/SDL audio env for SDL display,
disable host audio for VNC display
* src/qemu/qemu_conf.h, src/qemu/qemu_conf.c: Remove prefix arg
from qemuBuildHostNetStr which is no longer required
* src/qemu/qemu_driver.c: Refactor to use qemuMonitorAddHostNetwork()
API for adding host network
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorAddHostNetwork() method for adding host networks
* src/qemu/qemu_conf.c: Remove separator from qemuBuildNicStr()
args, and remove hardcoded 'nic' prefix. Leave it upto callers
instead
* src/qemu/qemu_driver.c: Switch over to using the new
qemuMonitorAddPCINetwork() method for NIC hotplug
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorAddPCINetwork API for PCI network device hotplug
Add the virStrncpy function, which takes a dst string, source string,
the number of bytes to copy and the number of bytes available in the
dest string. If the source string is too large to fit into the
destination string, including the \0 byte, then no data is copied and
the function returns NULL. Otherwise, this function copies n bytes
from source into dst, including the \0, and returns a pointer to the
dst string. This function is intended to replace all unsafe uses
of strncpy in the code base, since strncpy does *not* guarantee that
the buffer terminates with a \0.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Latest upstream QEMU can be built with Xen support, which introduces
a -xen-domid argument. This was mistakenly detected as -domid due
to old Xenner support. Adapt to cope with both syntax. Also only
set domid if the virt type is xen, or the guest type is xen
* src/qemu_conf.c, src/qemu_conf.h: Detect new -xen-domid flag in
preference to -domid.
* tests/qemuxml2argvdata/qemuxml2argv-bootloader.args,
tests/qemuxml2argvdata/qemuxml2argv-input-xen.args: Add missing
-domid param
* tests/qemuxml2argvdata/qemuxml2argv-misc-uuid.args: Remove bogus
-boot param.
* tests/qemuxml2argvtest.c: Add missing QEMUD_CMD_FLAG_DOMID params
