Check whether QEMU supports -device intel-iommu
Note that the presence of this option does not mean that it's
usable because of a bug in earlier QEMU versions, but it's
better than nothing.
https://bugzilla.redhat.com/show_bug.cgi?id=1235580
Commit c9c03ea stopped creating an intermediate file during syntax-check
to save on execution time. It also switched to outputting the whole
incorrectly wrapped file instead of a diff needed to fix it.
Feed the newly wrapped file to diff via a pipe.
Note that fixing it by running test-wrap-argv.pl --in-place or
the unit test with VIR_TEST_REGENERATE_OUTPUT is easier.
Commit 843a70a changed test-wrap-argv.pl to use
/usr/bin/env perl
instead of
/usr/bin/perl
However when called from qemuxml2argvtest with
VIR_TEST_REGENERATE_OUTPUT, PATH is set to '/bin'.
Find the path to perl early in virTestMain, in case we
are going to need it later after we've overridden PATH.
In commit ec5dcf2a and b0b4a35c we have moved qemuhotplugtest's XMLs to
new directories but forgot to fix the Makefile. Add 2 directories in
EXTRA_DIST to fix broken VPATH build. Also remove now unused
qemuhotplugtestdata directory from the Makefile as well as from the
tree.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The libvirtdconftest was previously used to test data type
handling of the libvirtd config file. Now we're using the
typedef APIs, this test case has little value, and is pretty
hard to fixup with deal with the new APIs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently many users of virConf APIs are defining the same
macros for calling virConfValue() and then doing type
checking. To remove this repeated code, add a set of
typesafe accessor methods.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virconftest is different from all our other tests in that
the C program only tests a single in/out config file pair. It
relies on a shell wrapper to invoke it once for each test
file.
This gets rid of the shell wrapper and makes the C program
actually run over each test file using the normal test pattern.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This way we can safely differentiate what XMLs contain whole domain
definitions and which contain just devices. Thanks to that we can
test the domain XMLs in virschematest again.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This makes the search for related XMLs easier, plus they are not used in
the xml2argv tests anyway. This also makes future patches cleaner.
While on that remove unnecessary '-hotplug' from the filenames.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In the mock, we have a stub for virNetDevTapCreate(). However,
the mocked version does not exactly as it's native counterpart.
The function receives a string, which is an interface name that
caller would like to have, but it's not guaranteed that they will
get just that one. If they don't, the function free()-s the one
passed and returns the new one. Just like the mocked version. But
what is the mocked version missing is the free().
==1068== 6 bytes in 1 blocks are definitely lost in loss record 9 of 132
==1068== at 0x4C29F80: malloc (vg_replace_malloc.c:296)
==1068== by 0xDE13356: xmlStrndup (in /usr/lib64/libxml2.so.2.9.4)
==1068== by 0xAE2333E: virXMLPropString (virxml.c:479)
==1068== by 0xAE45975: virDomainNetDefParseXML (domain_conf.c:9038)
==1068== by 0xAE5C0BB: virDomainDefParseXML (domain_conf.c:16734)
==1068== by 0xAE5EB96: virDomainDefParseNode (domain_conf.c:17444)
==1068== by 0xAE5EA05: virDomainDefParse (domain_conf.c:17391)
==1068== by 0xAE5EA93: virDomainDefParseFile (domain_conf.c:17415)
==1068== by 0x433430: testCompareXMLToArgvFiles (qemuxml2argvtest.c:278)
==1068== by 0x433A18: testCompareXMLToArgvHelper (qemuxml2argvtest.c:414)
==1068== by 0x446ED4: virTestRun (testutils.c:179)
==1068== by 0x43A099: mymain (qemuxml2argvtest.c:1016)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It's just test, but why leak it?
==26971== 20 bytes in 1 blocks are definitely lost in loss record 623 of 704
==26971== at 0x4C29F80: malloc (vg_replace_malloc.c:296)
==26971== by 0xE560447: vasprintf (vasprintf.c:76)
==26971== by 0xAE0DEE2: virVasprintfInternal (virstring.c:480)
==26971== by 0xAE0DFF7: virAsprintfInternal (virstring.c:501)
==26971== by 0x4751F3: qemuProcessPrepareMonitorChr (qemu_process.c:2651)
==26971== by 0x4334B1: testCompareXMLToArgvFiles (qemuxml2argvtest.c:297)
==26971== by 0x4339AC: testCompareXMLToArgvHelper (qemuxml2argvtest.c:413)
==26971== by 0x446E7A: virTestRun (testutils.c:179)
==26971== by 0x445D33: mymain (qemuxml2argvtest.c:2029)
==26971== by 0x44886F: virTestMain (testutils.c:969)
==26971== by 0x445D9B: main (qemuxml2argvtest.c:2036)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Status XML tests were done by prepending a constant string to an
existing XML. With the planned changes the header will depend on data
present in the definition rather than just on the data that was parsed.
The first dynamic element in the header will be the vcpu thread list.
Reuse and rename qemuXML2XMLPreFormatCallback for gathering the relevant
data when checking the active XML parsing and formating and pass the
bitmap to a newly crated header generator.
As the empty bitmap exists, we should also test it. This patch adds
test cases for the procedures 'virBitmapNextSetBit', 'virBitmapLastSetBit',
'virBitmapNextClearBit'.
Tested-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
This is preferrable to -nographic which (in addition to disabling
graphics output) redirects the serial port to stdio and on OpenBIOS
enables the firmware's serial console.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For type='ethernet' interfaces only.
(This patch had been pushed earlier in
commit 0b4645a7e0, but was reverted in
commit 84d47a3cce because it had been
accidentally pushed during the freeze for release 2.0.0)
This is place as a sub-element of <source>, where other aspects of the
host-side connection to the network device are located (network or
bridge name, udp listen port, etc). It's a bit odd that the interface
we're configuring with this info is itself named in <target dev='x'/>,
but that ship sailed long ago:
<interface type='ethernet'>
<mac address='00:16:3e:0f:ef:8a'/>
<source>
<ip address='192.168.122.12' family='ipv4'
prefix='24' peer='192.168.122.1'/>
<ip address='192.168.122.13' family='ipv4' prefix='24'/>
<route family='ipv4' address='0.0.0.0'
gateway='192.168.122.1'/>
<route family='ipv4' address='192.168.124.0' prefix='24'
gateway='192.168.124.1'/>
</source>
</interface>
In practice, this will likely only be useful for type='ethernet', so
its presence in any other type of interface is currently forbidden in
the generic device Validate function (but it's been put into the
general population of virDomainNetDef rather than the
ethernet-specific union member so that 1) we can more easily add the
capability to other types if needed, and 2) we can retain the info
when set to an invalid interface type all the way through to
validation and report a proper error, rather than just ignoring it
(which is currently what happens for many other type-specific
settings).
(NB: The already-existing configuration of IP info for the guest-side
of interfaces is in subelements directly under <interface>, and the
name of the guest-side interface (when configurable) is in <guest
dev='x'/>).
(This patch had been pushed earlier in
commit fe6a77898a, but was reverted in
commit d658456530 because it had been
accidentally pushed during the freeze for release 2.0.0)
In order to use more common code and set up for a future type, modify the
encryption secret to allow the "usage" attribute or the "uuid" attribute
to define the secret. The "usage" in the case of a volume secret would be
the path to the volume as dictated by the backwards compatibility brought
on by virStorageGenerateQcowEncryption where it set up the usage field as
the vol->target.path and didn't allow someone to provide it. This carries
into virSecretObjListFindByUsageLocked which takes the secret usage attribute
value from from the domain disk definition and compares it against the
usage type from the secret definition. Since none of the code dealing
with qcow/qcow2 encryption secrets uses usage for lookup, it's a mostly
cosmetic change. The real usage comes in a future path where the encryption
is expanded to be a luks volume and the secret will allow definition of
the usage field.
This code will make use of the virSecretLookup{Parse|Format}Secret common code.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add a new secret type known as "passphrase" - it will handle adding the
secret objects that need a passphrase without a specific username.
The format is:
<secret ...>
<uuid>...</uuid>
...
<usage type='passphrase'>
<name>mumblyfratz</name>
</usage>
</secret>
Signed-off-by: John Ferlan <jferlan@redhat.com>
I'm not sure why our code claimed "-boot menu=on" cannot be used in
combination with per-device bootindex, but it was proved wrong about
four years ago by commit 8c952908. Let's always use bootindex when QEMU
supports it.
https://bugzilla.redhat.com/show_bug.cgi?id=1323085
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Verify that SCSI controllers get created automatically when a SCSI disk
is hot-plugged to a domain that doesn't have a matching SCSI controller
defined already.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Commit cf0568b0af moved a bunch of functions from virNetDev
to the more specific virNetDevIP; however, not all of the
existing uses were moved properly, causing build failures on
FreeBSD.
Complete the transition to the new names and drop the
obsolete declarations from the header file while at it.
This is place as a sub-element of <source>, where other aspects of the
host-side connection to the network device are located (network or
bridge name, udp listen port, etc). It's a bit odd that the interface
we're configuring with this info is itself named in <target dev='x'/>,
but that ship sailed long ago:
<interface type='ethernet'>
<mac address='00:16:3e:0f:ef:8a'/>
<source>
<ip address='192.168.122.12' family='ipv4'
prefix='24' peer='192.168.122.1'/>
<ip address='192.168.122.13' family='ipv4' prefix='24'/>
<route family='ipv4' address='0.0.0.0'
gateway='192.168.122.1'/>
<route family='ipv4' address='192.168.124.0' prefix='24'
gateway='192.168.124.1'/>
</source>
</interface>
In practice, this will likely only be useful for type='ethernet', so
its presence in any other type of interface is currently forbidden in
the generic device Validate function (but it's been put into the
general population of virDomainNetDef rather than the
ethernet-specific union member so that 1) we can more easily add the
capability to other types, and 2) we can retain the info when set to
an invalid interface type all the way through to validation and report
a proper error, rather than just ignoring it (which is currently what
happens for many other type-specific settings).
(NB: The already-existing configuration of IP info for the guest-side
of interfaces is in subelements directly under <interface>, and the
name of the guest-side interface (when configurable) is in <guest
dev='x'/>).
When support for <interface type='ethernet'> was added in commit
9a4b705f back in 2010, it erroneously looked at <source dev='blah'/>
for a user-specified guest-side interface name. This was never
documented though. (that attribute already existed at the time in the
data.ethernet union member of virDomainNetDef, but apparently had no
practical use - it was only used as a storage place for a NetDef's
bridge name during qemuDomainXMLToNative(), but even then that was
never used for anything).
When support for similar guest-side device naming was added to the lxc
driver several years later, it was put in a new subelement <guest
dev='blah'/>.
In the intervening years, since there was no validation that
ethernet.dev was NULL in the other drivers that didn't actually use
it, innocent souls who were adding other features assuming they needed
to account for non-NULL ethernet.dev when really they didn't, so
little bits of the usual pointless cargo-cult code showed up.
This patch not only switches the openvz driver to use the documented
<guest dev='blah'/> notation for naming the guest-side device (just in
case anyone is still using the openvz driver), and logs an error if
anyone tries to set <source dev='blah'/> for a type='ethernet'
interface, it also removes the cargo-cult uses of ethernet.dev and
<source dev='blah'/>, and eliminates if from the RNG and from
virDomainNetDef.
NB: I decided on this course of action after mentioning the
inconsistency here:
https://www.redhat.com/archives/libvir-list/2016-May/msg02038.html
and getting encouragement do eliminate it in a later IRC discussion
with danpb.
Now that we can include <interface type='ethernet'> in tests, we could
almost test XML that has an <ip> element in an interface. Except that
the test fails when it tries to actually set the IP address for the
interface's tap device. This patch mocks virNetDevSetIPAddress() to
just return success.
These had been declared in conf/device_conf.h, but then used in
util/virnetdev.c, meaning that we had to #include conf/device_conf.h
in virnetdev.c (which we have for a long time said shouldn't be done.
This caused a bigger problem when I tried to #include util/virnetdev.h
in a file in src/conf (which is allowed) - for some reason the
"device_conf.h: File not found" error.
The solution is to move the data types and functions used in util
sources from conf to util. Some names were adjusted during the move
("virInterface" --> "virNetDevIf", and "VIR_INTERFACE" -->
"VIR_NETDEV_IF")
Some Intel processor families (e.g. the Intel Xeon processor E5 v3
family) introduced some PQos (Platform Qos) features, including CMT
(Cache Monitoring technology) and MBM (Memory Bandwidth Monitoring),
to monitor or control shared resource. This patch add them into x86
part of cpu_map.xml to be used for applications based on libvirt to
get cpu capabilities. For example, Nova in OpenStack schedules guests
based on the CPU features that the host has.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
The VIR_STORAGE_POOL_EVENT_REFRESHED constant does not
reflect any change in the lifecycle of the storage pool.
It should thus not be part of the storage pool lifecycle
event set, but rather be a top level event in its own
right. Thus we introduce VIR_STORAGE_POOL_EVENT_ID_REFRESH
to replace it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In order to read 16 bits of data in the native format and convert add
the 16 bit macros to match existing 32 and 64 bit code.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This partially reverts commit 9b45c9f049.
It changed the default format of socket address from the one SASL
requires, but did not adjust all the callers.
It also removed the test coverage for it.
Revert most of the changes except the virSocketAddrFormatFull support
for URI-formatted strings.
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=1345743 while
reverting the format used by virt-admin's client-info command from
the URI one to the SASL one.
https://bugzilla.redhat.com/show_bug.cgi?id=1345743
In cases where we expect parse failure of the test input file the
testsuite can't differentiate if the parser failed when parsing or when
opening the file. Add a call to virFileExists and error out on missing
input files.
Missing output files are partially expected when regenerating test
output.
Move the enum into a new src/util/virsecret.h, rename it to be
virSecretLookupType. Add a src/util/virsecret.h in order to perform
a couple of simple operations on the secret XML and virSecretLookupTypeDef
for clearing and copying.
This includes quite a bit of collateral damage, but the goal is to remove
the "virStorage*" and replace with the virSecretLookupType so that it's
easier to to add new lookups that aren't necessarily storage pool related.
Signed-off-by: John Ferlan <jferlan@redhat.com>
qemuMonitorMigrationParams is a better name for a structure which
contains various migration parameters. While doing that, we should use
full names for individual parameters.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Documentation for the "guest-set-vcpus" command describes a proper
algorithm how to set vcpus. This patch makes the following changes:
- state of cpus that has not changed is not updated
- if the command was partially successful the command is re-tried with
the rest of the arguments to get a proper error message
- code is more robust against malicious guest agent
- fix testsuite to the new semantics
Make them work again... The xml2xml had been working, but the xml2argv
were not working. Making the xml2argv work required a few adjustments to
the xml to update to more recent times.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since we support QEMU 0.12 and later, checking for support of specific flags
added prior to that isn't necessary.
Thus start with the base of having the "-o options" available for the
qemu-img create option and then determine whether we have the compat
option for qcow2 files (which would be necessary up through qemu 2.0
where the default changes to compat 0.11).
Adjust test to no long check for NONE and FLAG options as well was removing
results of tests that would use that option.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This script can already operate on a list of files.
Add a --check parameter to check if multiple files are wrapped
correctly with a single invocation of the script.
We have a list of parameters in @args, that need to be rewrapped
and separated by a space and escaped newline: " \\\n", with the
exception of the last one, which only needs a newline.
Instead of a for cycle, rewrap the individual arguments using map,
and interleave them with escaped newlines by using join.
This tests checks that the first word after SYNOPSIS
in virsh help ${command} output is ${command}.
This was only good to check that the command option structures
are valid, which is now served by 'virsh self-test'.
A new hidden command for virsh that will iterate over
all command groups and commands and print help for every single one.
This involves running vshCmddefOptParse so we can get an error if
one of the command's option structure is invalid.
Since e8ac4a7 this test wastes some CPU cycles by blindly trying to
run almost every virsh command, blindly throwing away the output
and the return value and returning success if 'virsh help' successfully
returned at least one command.
Drop it completely.
This will be used for the caller that needs to specify a separator.
Currently identical to virBitmapParse.
Also change one test case to use the new function.
The '-usb' option doesn't have any effect for aarch64 mach-virt
guests, so the fact that it's currently enabled by default is not
really causing any issue.
However, that might change in the future (although unlikely), and
having it as part of the QEMU command line can cause confusion to
someone looking through the process list.
Avoid it completely, like it's already happening for q35.
Commit 2a58ed0b added support for creating guests with USB
hostdevs. Commit fc21d10 later added support for hotplut of
USB hostdevs. Advertise support for USB hostdevs in the
domcapabilities.
In addition add the appropriate caps for USB support on
domaincapstest when libvirt is built on a Xen with
LIBXL_HAVE_PVUSB. Otherwise domaincapstest would fail i.e.
testing the wrong domain capabilities.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
There has been some progress lately in enabling virtio-pci on
aarch64 guests; however, guest OS support is still spotty at best,
so most guests are going to be using virtio-mmio instead.
Currently, mach-virt guests are closely modeled after q35 guests,
and that includes always adding a dmi-to-pci-bridge that's just
impossible to get rid of. While that's acceptable (if suboptimal)
for q35, where you will always need some kind of PCI device anyway,
mach-virt guests should be allowed to avoid it.
Our current detection code uses just the number of CPU features which
need to be added/removed from the CPU model to fully describe the CPUID
data. The smallest number wins. But this may sometimes generate wrong
results as one can see from the fixed test cases. This patch modifies
the algorithm to prefer the CPU model with matching signature even if
this model results in a longer list of additional features.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The CPU model was implemented in QEMU by commit f6f949e929.
The change to i7-5600U is wrong since it's a 5th generation CPU, i.e.,
Broadwell rather than Skylake, but that's just the result of our CPU
detection code (which is fixed by the following commit).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Until now, a Q35 domain (or arm/virt, or any other domain that has a
pcie-root bus) would always have a pci-bridge added, so that there
would be a hotpluggable standard PCI slot available to plug in any PCI
devices that might be added. This patch removes the explicit add,
instead relying on the pci-bridge being auto-added during PCI address
assignment (it will add a pci-bridge if there are no free slots).
This doesn't eliminate the dmi-to-pci-bridge controller that is
explicitly added whether or not a standard PCI slot is required (and
that is almost never used as anything other than a converter between
pcie.0's PCIe slots and standard PCI). That will be done separately.
