The qemu driver already does some <rng> model validation, based on
qemuCaps. However, the logic for exposing <rng> model values in domcaps
is basically identical. This drops the qemuCaps checking and compares
against the domCaps data directly.
This approach makes it basically impossible to add a new <rng> model to
the qemu driver without extending domcaps. The validation can also
be shared with other drivers eventually.
Reviewed-by: Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is an entrypoint to validate a virDomainDeviceDef against
values filled into virDomainCaps.
Currently it's just a stub
Reviewed-by: Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Current code doesn't allow us to add sub-features as we always print the
closing '/>'. As a preparatory change to implementing 'direct' sub-feature
for 'stimer' feature switch to printing closing tag individually.
No functional change.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Currently, the way we format PCI address is using printf-s
precision, e.g. "%.4x". This works if we don't want to print any
value outside of bounds (which is usually the case). However,
turns out, PCI domain can be 0x10000 which doesn't work well with
our format strings. However, if we change the format string to
"%04x" then we still pad small values with zeroes but also we are
able to print values that are larger than four digits. In fact,
this format string used by kernel to print a PCI address:
"%04x:%02x:%02x.%d"
The other three format strings (for bus, device and function) are
changed too, so that we use the same format string as kernel.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The format string for a PCI address is copied over and over
again, often with slight adjustments. Introduce global
VIR_PCI_DEVICE_ADDRESS_FMT macro that holds the formatting string
and use it wherever possible.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
A new algorithm for detecting the vcpus and monitor type conflicts
between new monitor an existing allocation and monitor groups.
After refactoring, since we are verifying both @vcpus and monitor
type @tag at the same time, the validating function name has been
renamed from virDomainResctrlMonValidateVcpus to
virDomainResctrlValidateMonitor.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'virResctrlAllocIsEmpty' checks if cache allocation or memory
bandwidth allocation settings are specified in configuration
file. It is not proper to be used in checking memory bandwidth
allocation is specified in XML settings because this function
could not distinguish memory bandwidth allocations from cache
allocations.
Here using the local variable @n, which indicates the cache
allocation groups or memory bandwidth groups depending on the
context it is in, to decide if append a new @resctrl object.
If @n is zero and no monitors groups specified in XML, then
we should not append a new @resctrl object to @def->resctrls.
This kind of replacement is also more efficient and avoiding
a long function calling path.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Let 'virDomainResctrlVcpuMatch' to retrieve a pointer of
virDomainResctrlDefPtr in its third parameter instead
of virResctrlAllocPtr, if @vcpus is matched with the vcpus
of some resctrl allocation in list of @def->resctrls.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Creating object and judging if it is successfully created in fewer
lines.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
code cleanup for 'virDomainCachetuneDefParse' and
'virDomainMemorytuneDefParse'.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
CI flagged a failing mingw build, due to:
In file included from ../../src/conf/checkpoint_conf.c:24:
../gnulib/lib/configmake.h:8:17: error: expected identifier or '(' before string constant
8 | #define DATADIR "/usr/i686-w64-mingw32/sys-root/mingw/share"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
As previously learned in commits bd205a90 and 976abdf6, gnulib's
configmake.h header does #define DATADIR "string...", while mingw's
<winsock2.h> expects to declare a type named DATADIR. As long as the
mingw system header is included first before configmake.h, the two
uses do not conflict, but until gnulib is patched to make configmake.h
automatically work around the issue, our immediate fix is the
workaround of rearranging our include order to insure no conflict.
Copy the paradigm used in domain_conf.c of using <unistd.h> to trigger
the indirect inclusion of <winsock2.h> on mingw.
Fixes: 1a4df34a
Signed-off-by: Eric Blake <eblake@redhat.com>
Wire up the use of a checkpoint list into each domain, similar to the
existing snapshot list. This includes adding a function for checking
that a redefine operation fits in with the existing list, as well as
various filtering capabilities over the list contents.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Create a new file for managing a list of checkpoint objects, borrowing
heavily from existing virDomainSnapshotObjList paradigms.
Note that while snapshots definitely have a use case for multiple
children to a single parent (create a base snapshot, create a child
snapshot, revert to the base, then create another child snapshot),
it's harder to predict how checkpoints will play out with reverting to
prior points in time. Thus, in initial use, given a list of
checkpoints, you never have more than one child, and we can treat the
most-recent leaf node as the parent of the next node creation, without
having to expose a notion of a current node in XML or public API.
However, as the snapshot machinery is already generic, it is easier to
reuse the generic machinery that tracks relations between domain
moments than it is to open-code a new list-management scheme just for
checkpoints (hence, we still have internal functions related to a
current checkpoint, even though that has no observable effect
externally, as well as the addition of a function to easily find the
lone leaf in the list to use as the current checkpoint).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a new file checkpoint_conf.c that performs the translation to and
from new XML describing a checkpoint. The code shares a common base
class with snapshots, since a checkpoint similarly represents the
domain state at a moment in time. Add some basic testing of round trip
XML handling through the new code.
Of note - this code intentionally differs from snapshots in that XML
schema validation is unconditional, rather than based on a public API
flag. We have many existing interfaces that still need to add a flag
for opt-in schema validation, but those interfaces have existing
clients that may not have been producing strictly-compliant XML, or we
may still uncover bugs where our RNG grammar is inconsistent with our
code (where omitting the opt-in flag allows existing apps to keep
working while waiting for an RNG patch). But since checkpoints are
brand-new, it's easier to ensure the code matches the schema by always
using the schema. If needed, a later patch could extend the API and
add a flag to turn on to request schema validation, rather than having
it forced (possibly just the validation of the <domain> sub-element
during REDEFINE) - but if a user encounters XML that looks like it
should be good but fails to validate with our RNG schema, they would
either have to upgrade to a new libvirt that adds the new flag, or
upgrade to a new libvirt that fixes the RNG schema, which implies
adding such a flag won't help much.
Also, the redefine flag requires the <domain> sub-element to be
present, rather than catering to historical back-compat to older
versions.
Signed-off-by: Eric Blake <eblake@redhat.com>
Introduce a bunch of new public APIs related to backup checkpoints.
Checkpoints are modeled heavily after virDomainSnapshotPtr (both
represent a point in time of the guest), although a snapshot exists
with the intent of rolling back to that state, while a checkpoint
exists to make it possible to create an incremental backup at a later
time. We may have a future hypervisor that can completely manage
checkpoints without libvirt metadata, but the first two planned
hypervisors (qemu and test) both always use libvirt for tracking
metadata relations between checkpoints, so for now, I've deferred
the counterpart of virDomainSnapshotHasMetadata for a separate
API addition at a later date if there is ever a need for it.
Note that until we allow snapshots and checkpoints to exist
simultaneously on the same domain (although the actual prevention of
this will be in a separate patch for the sake of an easier revert down
the road), that it is not possible to branch out to create more than
one checkpoint child to a given parent, although it may become
possible later when we revert to a snapshot that coincides with a
checkpoint. This also means that for now, the decision of which
checkpoint becomes the parent of a newly created one is the only
checkpoint with no child (so while there are APIs for dealing with a
current snapshot, we do not need those for checkpoints). We may end
up exposing a notion of a current checkpoint later, but it's easier to
add stuff when proven needed than to blindly support it now and wish
we hadn't exposed it.
The following map shows the API relations to snapshots, with new APIs
on the right:
Operate on a domain object to create/redefine a child:
virDomainSnapshotCreateXML virDomainCheckpointCreateXML
Operate on a child object for lifetime management:
virDomainSnapshotDelete virDomainCheckpointDelete
virDomainSnapshotFree virDomainCheckpointFree
virDomainSnapshotRef virDomainCheckpointRef
Operate on a child object to learn more about it:
virDomainSnapshotGetXMLDesc virDomainCheckpointGetXMLDesc
virDomainSnapshotGetConnect virDomainCheckpointGetConnect
virDomainSnapshotGetDomain virDomainCheckpointGetDomain
virDomainSnapshotGetName virDomainCheckpiontGetName
virDomainSnapshotGetParent virDomainCheckpiontGetParent
virDomainSnapshotHasMetadata (deferred for later)
virDomainSnapshotIsCurrent (no counterpart, see note above)
Operate on a domain object to list all children:
virDomainSnapshotNum (no counterparts, these are the old
virDomainSnapshotListNames racy interfaces)
virDomainSnapshotListAllSnapshots virDomainListAllCheckpoints
Operate on a child object to list descendents:
virDomainSnapshotNumChildren (no counterparts, these are the old
virDomainSnapshotListChildrenNames racy interfaces)
virDomainSnapshotListAllChildren virDomainCheckpointListAllChildren
Operate on a domain to locate a particular child:
virDomainSnapshotLookupByName virDomainCheckpointLookupByName
virDomainSnapshotCurrent (no counterpart, see note above)
virDomainHasCurrentSnapshot (no counterpart, old racy interface)
Operate on a snapshot to roll back to earlier state:
virDomainSnapshotRevert (no counterpart, instead checkpoints
are used in incremental backups via
XML to virDomainBackupBegin)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since we are checking the 2nd parameter in the function for NULL,
we need to remove ATTRIBUTE_NONNULL(2) from the prototype.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Message-Id: <20190726205633.2041912-5-stefanb@linux.vnet.ibm.com>
Since swtpm does not support getting started without password
once it was created with encryption enabled, we don't allow
encryption to be removed. Similarly, we do not allow encryption
to be added once swtpm has run. We also prevent chaning the type
of the TPM backend since the encrypted state is still around and
the next time one was to switch back to the emulator backend
and forgot the encryption the TPM would not work.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Extend the TPM device XML parser and XML generator with emulator
state encryption support.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add support for usage type vTPM to secret.
Extend the schema for the Secret to support the vTPM usage type
and add a test case for parsing the Secret with usage type vTPM.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When using the ENUM macros, the compiler guards that the declaration
and implementation are in sync.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Any message that is easy to trigger (as evidenced by the testsuite
update) should not use 'internal error' as its category.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
virDomainSnapshotFindByName(list, NULL) should return NULL, rather
than the internal-use-only metaroot. Most existing callers pass in a
non-NULL name; the few external callers that don't are immediately
calling virDomainMomentSetParent (which indeed needs the metaroot
rather than NULL if the parent name is NULL); but as the leaky
abstraction is ugly, it is worth instead making
virDomainMomentSetParent static and adding a new function for
resolving the parent link of a brand new moment within its list. The
existing external uses of virDomainMomentSetParent always succeed
(either the new moment has parent_name of NULL to become a new root,
or has parent_name set to a strdup of the previous current moment);
hence, our new function does not need a return value (but it still has
a VIR_WARN in case future uses break our assumptions about failure
being impossible).
Missed when commit 02c4e24d refactored things to attempt to remove
direct metaroot manipulations out of the qemu and test drivers into
internal-only details, and made more obvious when commit dc8d3dc6
factored it out into a separate file.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tests will need to parse such a definition so it also needs to be freed.
Provide a function for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pass an xmlopt argument through all the needed network conf
functions, like is done for domain XML handling. No functional
change for now
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Just a stub for now that is unused. Add init+cleanup plumbing and
demostrate it in bridge_driver.c
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Update schema and configuration to allow specifying new video type of
'bochs'. Add implementation and tests for qemu.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add pool list type flag VIR_CONNECT_LIST_STORAGE_POOLS_ISCSI_DIRECT,
which was forgotten when introducing iscsi-direct pool at f0bf1be3.
https://bugzilla.redhat.com/show_bug.cgi?id=1726609
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The code to check whether a redefined snapshot/checkpoint XML is
attempting to create a cycle in the list of moments is lengthy, and
common between the two types of list. Therefore, it belongs in the
shared base file.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
This reverts commit 035db37394
Even though we only allow using RBD with raw volumes,
removing the options and the default format causes our
parser not to fill out the volume format and the backend code
rejects creating a non-raw volume.
Re-introduce the volume options to fix volume creation while
erroring out on requests to use non-raw formats.
https://bugzilla.redhat.com/show_bug.cgi?id=1724065
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The cleanup label in virNetworkObjDeletePort() function serves no
purpose. Drop it and thus simplify the function a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The cleanup label in virNetworkObjAddPort() function serves no
purpose. Drop it and thus simplify the function a bit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The virNetworkObjGetPortStatusDir() function allocates a memory
to construct a path. None of the callers free it leading to a
memleak.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
When we allow multiple instances of the driver for the same user
account, using a separate root directory, we need to ensure mutual
exclusion. Use a pidfile to guarantee this.
In privileged libvirtd this ends up locking
/var/run/libvirt/nwfilter/driver.pid
In unprivileged libvirtd this ends up locking
/run/user/$UID/libvirt/nwfilter/run/driver.pid
NB, the latter can vary depending on $XDG_RUNTIME_DIR
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When we allow multiple instances of the driver for the same user
account, using a separate root directory, we need to ensure mutual
exclusion. Use a pidfile to guarantee this.
In privileged libvirtd this ends up locking
/var/run/libvirt/nodedev/driver.pid
In unprivileged libvirtd this ends up locking
/run/user/$UID/libvirt/nodedev/run/driver.pid
NB, the latter can vary depending on $XDG_RUNTIME_DIR
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When we allow multiple instances of the driver for the same user
account, using a separate root directory, we need to ensure mutual
exclusion. Use a pidfile to guarantee this.
In privileged libvirtd this ends up locking
/var/run/libvirt/storage/driver.pid
In unprivileged libvirtd this ends up locking
/run/user/$UID/libvirt/storage/run/driver.pid
NB, the latter can vary depending on $XDG_RUNTIME_DIR
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Similar to VIR_DOMAIN_DEF_PARSE_VALIDATE_SCHEMA; the next patch will
put it to use with a counterpart public API flag.
No need to change qemudomainsnapshotxml2xmltest to use the flag, since
the testsuite already has a separate virschematest that does the same.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Commit a7fb2258 added sanitization of storage pool target paths,
however source dir paths were left unsanitized.
A netfs pool with:
<source>
<host name='10.20.30.40'/>
<dir path='/nfs/'/>
</source>
will not be correctly detected as mounted by
virStorageBackendFileSystemIsMounted, because it shows up in the
mount list without the trailing slash.
Sanitize the source dir as well.
https://bugzilla.redhat.com/show_bug.cgi?id=1723247
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
The function modifies the context but did not care to restore it back.
If a <seclabel> was used on a disk, the <privateData> would not be
parsed.
Use VIR_XPATH_NODE_AUTORESTORE and add a test case to validate that
everything works.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will allow enabling/disabling custom hypervisor
features for debugging/testing purposes via the qemu namespace.
Add a taint flag where we will flag such a domain so it's obvious what's
happening.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
