This new API reads host's CPU microcode version from /proc/cpuinfo.
Unfortunately, there is no other way of reading microcode version which
would be usable from both system and session daemon.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1519130
Commit id 'dc692438' reverted the automagic addition of a SCSI
controller attempt during virDomainHostdevAssignAddress; however,
the logic to determine where to place the next_unit depended upon
the "new" controller being added. Without the new controller the
the next time through the call for the next SCSI hostdev found
would result in the "next_unit" never changing from 0 (zero) and
as a result the addition of the device will fail due to being a
duplicate unit number of the first with the error message:
virDomainDefCheckDuplicateDriveAddresses:$line : unsupported
configuration: SCSI host address controller='0' bus='1'
target='0' unit='0' in use by another SCSI host device
So instead of walking the controller list looking for SCSI
controllers, all we can do is "pretend" that they exist and
allow other code to create them later as necessary.
In virDomainDefMaybeAddHostdevSCSIcontroller when we add a new
controller because someone neglected to add one or we're adding
one because the existing one is full, we should copy over the
model number from the existing controller since whatever we
create should at least have the same characteristics as the one
we cannot use because it's full.
NB: This affects the existing hostdev-scsi-autogen-address test
which would add a default ('lsi') SCSI controller for the various
scsi_host's that would create a controller for the hostdev.
When qemuDomainFindOrCreateSCSIDiskController adds a controller,
let's use the same model as a currently found controller under the
assumption that the reason to add the controller in hotplug is
because virDomainHostdevAssignAddress determined that there were
too many devices on the existing controller, but only assigned a
new controller index and did not add a new controller and we
desire to use the same controller model as any existing controller
and not take a chance that qemuDomainSetSCSIControllerModel would
use a default that may be incompatible.
Let's move the udevEnumerateDevices into a thread to "speed
up" the initialization process. If the enumeration fails we
can set the Quit flag to ensure that udevEventHandleCallback
will not run.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Replace virNetServerClientNeedAuth with
virNetServerClientIsAuthenticated because it makes it clearer what it
means.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
'Squash' virNetServerClientNeedAuthLocked into
virNetServerClientNeedAuth and remove virNetServerClientNeedAuthLocked
as it's not longer needed.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Enable testing for 'auth_pending' in the virnetdaemon test case.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
There is a race between virNetServerProcessClients (main thread) and
remoteDispatchAuthList/remoteDispatchAuthPolkit/remoteSASLFinish (worker
thread) that can lead to decrementing srv->nclients_unauth when it's
zero. Since virNetServerCheckLimits relies on the value
srv->nclients_unauth the underrun causes libvirtd to stop accepting
new connections forever.
Example race scenario (assuming libvirtd is using policykit and the
client is privileged):
1. The client calls the RPC remoteDispatchAuthList =>
remoteDispatchAuthList is executed on a worker thread (Thread
T1). We're assuming now the execution stops for some time before
the line 'virNetServerClientSetAuth(client, 0)'
2. The client closes the connection irregularly. This causes the
event loop to wake up and virNetServerProcessClient to be
called (on the main thread T0). During the
virNetServerProcessClients the srv lock is hold. The condition
virNetServerClientNeedAuth(client) will be checked and as the
authentication is not finished right now
virNetServerTrackCompletedAuthLocked(srv) will be called =>
--srv->nclients_unauth => 0
3. The Thread T1 continues, marks the client as authenticated, and
calls virNetServerTrackCompletedAuthLocked(srv) =>
--srv->nclients_unauth => --0 => wrap around as nclient_unauth is
unsigned
4. virNetServerCheckLimits(srv) will disable the services forever
To fix it, add an auth_pending field to the client struct so that it
is now possible to determine if the authentication process has already
been handled for this client.
Setting the authentication method to none for the client in
virNetServerProcessClients is not a proper way to indicate that the
counter has been decremented, as this would imply that the client is
authenticated.
Additionally, adjust the existing test cases for this new field.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Combine virNetServerClientSetAuth(client,
VIR_NET_SERVER_SERVICE_AUTH_NONE) and virNetServerTrackCompletedAuth
into one new function named virNetServerSetClientAuthenticated.
After using this new function the function
virNetServerTrackCompletedAuth was superfluous and is therefore
removed. In addition, it is not very common that a
'{{function}}' (virNetServerTrackCompletedAuth) does more than just
the locking compared to
'{{function}}Locked' (virNetServerTrackCompletedAuthLocked).
virNetServerTrackPendingAuth was already superfluous and therefore
it's also removed.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The lock for @client must not only be held for the duration of
checking whether the client wants to close, but also for as long as
we're closing the client. The same applies to the tracking of
authentications.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Add virNetServerClientAuthMethodImpliesAuthenticated() for deciding
whether a authentication method implies that a client is automatically
authenticated or not. Use this new function in
virNetServerClientNeedAuthLocked().
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
This makes the code more efficient.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Be more precise in which cases the authentication is needed and
introduce *Locked.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add typedef for the anonymous enum used for the authentication methods
and remove the default case. This allows the usage of the type in a
switch statement and taking advantage of the compilers feature to
detect uncovered cases.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Direct leak of 104 byte(s) in 1 object(s) allocated from:
#0 0x7f904bfbe12b (/lib64/liblsan.so.0+0xe12b)
#1 0x7f904ba0ad67 in virAlloc ../../src/util/viralloc.c:144
#2 0x7f904bbc11a4 in virNetMessageNew ../../src/rpc/virnetmessage.c:42
#3 0x7f904bbb8e77 in virNetServerClientNewInternal ../../src/rpc/virnetserverclient.c:392
#4 0x7f904bbb9921 in virNetServerClientNew ../../src/rpc/virnetserverclient.c:440
#5 0x402ce5 in testIdentity ../../tests/virnetserverclienttest.c:55
#6 0x403bed in virTestRun ../../tests/testutils.c:180
#7 0x402c1e in mymain ../../tests/virnetserverclienttest.c:146
#8 0x404c80 in virTestMain ../../tests/testutils.c:1119
#9 0x4030d5 in main ../../tests/virnetserverclienttest.c:152
#10 0x7f9047f7f889 in __libc_start_main (/lib64/libc.so.6+0x20889)
Indirect leak of 4 byte(s) in 1 object(s) allocated from:
#0 0x7f904bfbe12b (/lib64/liblsan.so.0+0xe12b)
#1 0x7f904ba0adc7 in virAllocN ../../src/util/viralloc.c:191
#2 0x7f904bbb8ec7 in virNetServerClientNewInternal ../../src/rpc/virnetserverclient.c:395
#3 0x7f904bbb9921 in virNetServerClientNew ../../src/rpc/virnetserverclient.c:440
#4 0x402ce5 in testIdentity ../../tests/virnetserverclienttest.c:55
#5 0x403bed in virTestRun ../../tests/testutils.c:180
#6 0x402c1e in mymain ../../tests/virnetserverclienttest.c:146
#7 0x404c80 in virTestMain ../../tests/testutils.c:1119
#8 0x4030d5 in main ../../tests/virnetserverclienttest.c:152
#9 0x7f9047f7f889 in __libc_start_main (/lib64/libc.so.6+0x20889)
SUMMARY: LeakSanitizer: 108 byte(s) leaked in 2 allocation(s).
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
All calls to virDomainAuditCgroupPath() were passing 'rc == 0' as
argument, when it was supposed to pass the 'rc' value directly.
As a consequence, the audit events that were supposed to be
logged (actual cgroup changes) were never being logged, and bogus
audit events were logged when using regular files as disk image.
Fix all calls to use the return value of
virCgroup{Allow,Deny}Device*() directly as the 'rc' argument.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After commit a693fdb 'vol-dumpxml' missed the ability to show backingStore
information. This commit adds a volume type for files that fixes this
problem.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1529663
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1448149
If a domain has no numa nodes, that means we don't put any
memory-backend-file onto the qemu command line. That in turn
means we can't set access='shared'. Therefore, we should produce
an error instead of ignoring the setting silently.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The PROBE macro used in qemuMonitorIOProcess and the VIR_DEBUG message
in qemuMonitorJSONIOProcess create a lot of logging churn when debug
logging is enabled during monitor communication.
The messages logged from the PROBE macro are rather useless since they
are reporting the partial state of receiving the reply from qemu. The
actual full reply is still logged in qemuMonitorJSONIOProcessLine once
the full message is received.
There are a few more description-related issues that commit @9026d115
forgot to address.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Set a transient hostname on containers. The hostname is computed from
the container name, only keeping the valid characters [a-zA-Z0-9-] in it.
This filtering is based on RFC 1123 and allows a digit to start the
hostname.
There's no argument named @result, use @matches instead.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
On live migration with --p2p like:
$ virsh migrate --live --p2p kvmguest-bionic-normal \
qemu+ssh://10.6.221.80/system
We hit an apparmor deny like:
apparmor="DENIED" operation="file_inherit"
profile="/usr/sbin/libvirtd" pid=23477 comm="ssh" family="unix"
sock_type="stream" protocol=0 requested_mask="send receive"
denied_mask="send" addr=none peer_addr=none peer="unconfined"
The rule is not perfect, but can't be restricted further at the moment
(new upstream kernel features needed). For now the lack of a profile on the
peer as well as comm not being a conditional on rules do not allow to filter
further.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
These are already exported at header file level because of
VIR_ENUM_DECL being in numa_conf.h. However, they are not being
exported at object level because of missing libvirt_private.syms
record.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
QEMU 2.7 and newer don't allow guests to start unless the initial
vCPUs count is a multiple of the vCPU hotplug granularity, so
validate it and report an error if needed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1283700
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
While at the moment we're only performing a single check that is
connected to vCPU hotplugging, we're going to introduce a second
one soon. Move the topology check underneath the capability check
to make that easier; since, after this change, the 'topologycpus'
variable doesn't need to have function scope, we move its
declaration to the inner scope as well.
The comments around the check are modified in order to explain
the different QEMU versions involved.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Similar to qemuDomainAddChardevTLSObjects let's move the chardev
source must be TCP and it has the @haveTLS flag set checks before
trying to delete the TLS objects.
For the Chr device this represents no change; however, for RNG device
this is an additionaly check that was missed in commit id '68808516'.
Before adding the objects, TCP and haveTLS are checked.
Let's make a comment deletion helper similar to the Add helper
that can be called after the ExitMonitor.
The modify qemuDomainRemoveChrDevice and qemuDomainRemoveRNGDevice
to call the helper instead of inlining the copy and pasted code.
So far clients were closed when disposing the daemon, after the state
driver cleanup. This was leading to libvirtd crashing at shutdown due
to missing driver.
Moving the client close in virNetServerClose() fixes the problem.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
virt-aa-helper needs read access to the disk image to resolve symlinks
and add the proper rules to the profile. Its profile whitelists a few
common paths, but users can place their images anywhere.
This commit helps users allowing access to their images by adding their
own rules in apparmor.d/local/usr.lib.libvirt.virt-aa-helper.
This commit also adds rules to allow reading files named:
- *.raw as this is a rather common disk image extension
- /run/libvirt/**[vd]d[a-z] as these are used by virt-sandbox
When autogen.sh finishes it helpfully prints
"Now type 'make' to compile libvirt."
which is fine if on a host with GNU make, but on *BSD running
'make' will end in tears. We should tell users to run 'gmake'
on these platforms. If 'gmake' doesn't exist then we should
report an error too
"GNU make is required to build libvirt"
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The list_guests function in libvirt-guests uses 'grep -v' to filter
Xen domain0 from a list of guests. If domain0 is the only item in
the list, 'grep -v' returns 1, causing the 'stop' operation to fail
when action is 'suspend'. Improve the filtering by using sed to remove
domain0 from the list of guests.
Prior to this change, we relied solely on the inherited readonly
attribute of a service's socket. This only worked for our UNIX sockets
(and only to some degree), but doesn't work for TCP sockets which are RW
by default, but such connections support RO as well. This patch forces
an update on the client object once we have established a connection to
reflect the nature of the connection itself rather than relying on the
underlying socket's attributes.
Clients connected to the admin server have always been connected as RW
only.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1524399
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The use of [[:blank:]] was intended to cover tabs as well, but
it couldn't possibly work in its current form, so the regex was
tweaked in d09429abe8.
With the original reason for using [[:blank:]] now gone, we can
replace its usage with plain spaces. A comment about the purpose
of the check is added as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
ebtables/iptables processing is skipped for any interface connected to
Open vSwitch (they have their own packet filtering), likewise for
midonet (according to
http://blog.midokura.com/2016/04/midonet-rule-chains), but libvirt
would allow adding a <filterref> to interfaces connected in these
ways, so the user might mistakenly believe they were being protected.
This patch checks for a non-NULL <virtualport> element for an
interface (or its network) and logs an error if <virtualport> and
<filterref> are both present. This could cause some previously working
domains to no longer start, but that's really the whole point of this
patch - to warn people that their filterref isn't protecting them as
they might have thought.
I don't bother checking this during post-parse validation, because
such a check would be incomplete - it's possible that a network would
have a <virtualport> that would be applied to an interface, and you
can't know that until the domain is started.
Resolves: https://bugzilla.redhat.com/1502754
When the <bandwidth> of an interface is changed with update-device,
the old settings are cleared with tc, then new settings added with
tc. But if the <bandwidth has been removed, the old settings weren't
being removed, so the bandwidth restrictions would still be active on
the interface although the interface status in libvirt showed that
they had been removed.
This patch fixes it by calling virNetDevBandwidthClear() if the
"modification" to the interface bandwidth was to completely clear
it.
An alternative could have been to modify virNetDevBandwidthSet() to
always clear existing bandwith settings at the beginning of the
function (currently it short circuits in that case, doing nothing),
but that would have led to cases where virNetDevBandwidthClear() was
now being called in cases where it previously wasn't, and while many
of those cases would be NOPs, there could be cases where it would
cause an error. The way this patch works, the ...Clear() function is
only called in cases where the ...Set() function had previously been
called successfully, so the risk of regression is minimized.
Resolves: https://bugzilla.redhat.com/1454709
Also call qemuDomainRemoveInputDevice if we receive the
event after the Detach API ends.
Commit 67486bb failed to include this.
https://bugzilla.redhat.com/show_bug.cgi?id=1524837
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
