Since 0766783abb
Coverity complains that the EDIT_FREE definition results in DEADCODE.
As it turns out with the change to use the EDIT_FREE macro the call to
vir*Free() wouldn't be necessary nor would it happen...
Prior code to above commitid would :
vir*Ptr foo = NULL;
...
foo = vir*GetXMLDesc()
...
vir*Free(foo);
foo = vir*DefineXML()
...
And thus the free was needed. With the change to use EDIT_FREE the
same code changed to:
vir*Ptr foo = NULL;
vir*Ptr foo_edited = NULL;
...
foo = vir*GetXMLDesc()
...
if (foo_edited)
vir*Free(foo_edited);
foo_edited = vir*DefineXML()
...
However, foo_edited could never be set in the code path - even with
all the goto's since the only way for it to be set is if vir*DefineXML()
succeeds in which case the code to allow a retry (and thus all the goto's)
never leaves foo_edited set
All error paths lead to "cleanup:" which causes both foo and foo_edited
to call the respective vir*Free() routines if set.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Coverity complains that when multiplying to 32 bit values that eventually
will be stored in a 64 bit value that it's possible the math could
overflow unless one of the values being multiplied is type cast to
the proper size.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Coverity complains that checking for !domlist after setting doms = domlist
and making a deref of doms just above
It seems the call in question was intended to me made in the case that
'doms' was passed in and not when the virDomainObjListExport() call
allocated domlist and already called virConnectGetAllDomainStatsCheckACL().
Thus rather than check for !domlist - check that "doms != domlist" in
order to avoid the Coverity message.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Handle a few places where Coverity complains about the value being
unused. For two of them (Close cases) - the comments above the close
indicate there is no harm to ignore the error - so added an ignore_value.
For the other condition, added an rc check like other callers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since cd4d547576
Coverity notes that setting 'ret = -3' prior to the unconditional
setting of 'ret = 0' will cause the value to be UNUSED.
Since the comment indicates that it is expect to allow the code
to continue, just remove the ret = -3 setting.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In qemuDomainSetBlkioParameters(), Coverity points out that the calls
to qemuDomainParseBlkioDeviceStr() are slightly different and points
out there may be a cut-n-paste error.
In the first call (AFFECT_LIVE), the second parameter is "param->field";
however, for the second call (AFFECT_CONFIG), the second parameter is
"params->field". It seems the "param->field" is correct especially since
each path as a setting of "param" to "¶ms[i]". Furthermore, there
were a few more instances of using "params[i]" instead of "param->"
which I cleaned up.
Signed-off-by: John Ferlan <jferlan@redhat.com>
After a4431931 the TAP FDs ale labeled with image label instead
of the process label. On the other hand, the commit was
incomplete as a few lines above, there's still old check for the
process label presence while it should be check for the image
label instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tweak the messages so that they mention "title" rather than
"description" when operating in title mode. Also fixes one missing "%s"
before non-formatted gettext message.
Before:
$ virsh desc --title dom
No description for domain: dom
After:
$ virsh desc --title dom
No title for domain: dom
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1140034
From time to time weird bugreports occur on the list, e.g [1].
Even though the kernel supports setns syscall, there's an older
glibc in the system that misses a wrapper over the syscall.
Hence, after the configure phase we think there's no setns
support in the system, which is obviously wrong. On the other
hand, we can't rely on linux distributions to provide newer glibc
soon. Therefore we need to introduce the wrapper on or own.
1: https://www.redhat.com/archives/libvir-list/2014-September/msg00492.html
Signed-off-by: Stephan Sachse <ste.sachse@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
virProcessTranslateStatus is used on error paths that should not spoil
the returned error. As the errors are ignored, use the quiet versions of
virAsprintf to create the message.
When using split UEFI image, it may come handy if libvirt manages per
domain _VARS file automatically. While the _CODE file is RO and can be
shared among multiple domains, you certainly don't want to do that on
the _VARS file. This latter one needs to be per domain. So at the
domain startup process, if it's determined that domain needs _VARS
file it's copied from this master _VARS file. The location of the
master file is configurable in qemu.conf.
Temporary, on per domain basis the location of master NVRAM file can
be overridden by this @template attribute I'm inventing to the
<nvram/> element. All it does is holding path to the master NVRAM file
from which local copy is created. If that's the case, the map in
qemu.conf is not consulted.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
QEMU now supports UEFI with the following command line:
-drive file=/usr/share/OVMF/OVMF_CODE.fd,if=pflash,format=raw,unit=0,readonly=on \
-drive file=/usr/share/OVMF/OVMF_VARS.fd,if=pflash,format=raw,unit=1 \
where the first line reflects <loader> and the second one <nvram>.
Moreover, these two lines obsolete the -bios argument.
Note that UEFI is unusable without ACPI. This is handled properly now.
Among with this extension, the variable file is expected to be
writable and hence we need security drivers to label it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Up to now, users can configure BIOS via the <loader/> element. With
the upcoming implementation of UEFI this is not enough as BIOS and
UEFI are conceptually different. For instance, while BIOS is ROM, UEFI
is programmable flash (although all writes to code section are
denied). Therefore we need new attribute @type which will
differentiate the two. Then, new attribute @readonly is introduced to
reflect the fact that some images are RO.
Moreover, the OVMF (which is going to be used mostly), works in two
modes:
1) Code and UEFI variable store is mixed in one file.
2) Code and UEFI variable store is separated in two files
The latter has advantage of updating the UEFI code without losing the
configuration. However, in order to represent the latter case we need
yet another XML element: <nvram/>. Currently, it has no additional
attributes, it's just a bare element containing path to the variable
store file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After the previous commit, migration statistics on the source and
destination hosts are not equal because the destination updated time
statistics. Let's send the result back so that the same data can be
queried on both sides of the migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Total time of a migration and total downtime transfered from a source to
a destination host do not count with the transfer time to the
destination host and with the time elapsed before guest CPUs are
resumed. Thus, source libvirtd remembers when migration started and when
guest CPUs were paused. Both timestamps are transferred to destination
libvirtd which uses them to compute total migration time and total
downtime. Obviously, this requires the time to be synchronized between
the two hosts. The reported times are useless otherwise but they would
be equally useless if we didn't do this recomputation so don't lose
anything by doing it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When migrating a transient domain or with VIR_MIGRATE_UNDEFINE_SOURCE
flag, the domain may disappear from source host. And so will migration
statistics associated with the domain. We need to transfer the
statistics at the end of a migration so that they can be queried at the
destination host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virDomainGetJobStats gains new VIR_DOMAIN_JOB_STATS_COMPLETED flag that
can be used to fetch statistics of a completed job rather than a
currently running job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Job statistics data were tracked in several structures and variables.
Let's make a new qemuDomainJobInfo structure which can be used as a
single source of statistics data as a preparation for storing data about
completed a job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The parser accepts P and E, so the formatter should too.
* tools/virsh.c (vshPrettyCapacity): Handle larger units.
Signed-off-by: Eric Blake <eblake@redhat.com>
The new blockcopy API wants to reuse only a subset of the disk
hotplug parser - namely, we only care about the embedded
virStorageSourcePtr inside a <disk> XML. Strange as it may
seem, it was easier to just parse an entire disk definition,
then throw away everything but the embedded source, than it
was to disentangle the source parsing code from the rest of
the overall disk parsing function. All that I needed was a
couple of tweaks and a new internal flag that determines
whether the normally-mandatory target element can be
gracefully skipped, since everything else was already optional.
* src/conf/domain_conf.h (virDomainDiskSourceParse): New
prototype.
* src/conf/domain_conf.c (VIR_DOMAIN_XML_INTERNAL_DISK_SOURCE):
New flag.
(virDomainDiskDefParseXML): Honor flag to make target optional.
(virDomainDiskSourceParse): New function.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit c1d75de caused this warning on 32-bit platforms (fatal when
-Werror is enabled):
virsh-domain.c: In function 'cmdBlockCopy':
virsh-domain.c:2003:17: error: comparison is always false due to limited range of data type [-Werror=type-limits]
Forcing the left side of the < to be ull instead of ul shuts up
the 32-bit compiler while still protecting 64-bit code from overflow.
* tools/virsh-domain.c (cmdBlockCopy): Add type coercion.
Signed-off-by: Eric Blake <eblake@redhat.com>
qemu now checks for invalid address type for a panic device, which is
currently implemented only to use ISA address type, thus rejecting
any other options, except for leaving XML attributes blank, in that case,
defaults are used (this behaviour remains the same from earlier verions).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1138125
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When QEMU fails during incoming migration after we successfully started
it (i.e., during Perform or Finish phase), we report a rather unhelpful
message
Unable to read from monitor: Connection reset by peer
We already have a code that takes error messages from QEMU's error
output but we disable it once QEMU successfully starts. This patch
postpones this until the end of Finish phase during incoming migration
so that we can report a much better error message:
internal error: early end of file from monitor: possible problem:
Unknown savevm section or instance '0000:00:05.0/virtio-balloon' 0
load of migration failed
https://bugzilla.redhat.com/show_bug.cgi?id=1090093
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Return failure right away when the domain object can't be looked up
instead of jumping to cleanup. This allows to remove the condition
before unlocking the domain object.
The code would lookup the snapshot object before acquiring the job. This
could lead to a crash as one thread could delete the snapshot object,
while a second thread already had the reference.
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Creating snapshots modifies the domain state. Currently we wouldn't
enter the job for certain operations although they would modify the
state. Refactor job handling so that everything is covered by an async
job.
For security type='none' libvirt according to the docs should not
generate seclabel be it for selinux or any model. So, skip the
reservation of labels when type is none.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Fairly straightforward - I got lucky that the generated functions
worked out of the box :)
* src/remote/remote_protocol.x (remote_domain_block_copy_args):
New struct.
(REMOTE_PROC_DOMAIN_BLOCK_COPY): New RPC.
* src/remote/remote_driver.c (remote_driver): Wire it up.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Expose the new power of virDomainBlockCopy through virsh (well,
all but the finer-grained bandwidth, as that is its own can of
worms for a later patch). Continue to use the older API where
possible, for maximum compatibility.
The command now requires either --dest (with optional --format
and --blockdev), to directly describe the file destination, or
--xml, to name a file that contains an XML description such as:
<disk type='network'>
<driver type='raw'/>
<source protocol='gluster' name='vol1/img'>
<host name='red'/>
</source>
</disk>
[well, it may be a while before the qemu driver is actually patched
to act on that particular xml beyond just parsing it, but the virsh
interface won't need changing at that time]
Non-zero option parameters are converted into virTypedParameters,
and if anything requires the new API, the command can synthesize
appropriate XML even if the --dest option was used instead of --xml.
The existing --raw flag remains for back-compat, but the preferred
spelling is now --format=raw, since the new API now allows us
to specify all formats rather than just a boolean raw to suppress
probing.
I hope I did justice in describing the effects of granularity and
buf-size on how they get passed through to qemu.
* tools/virsh-domain.c (cmdBlockCopy): Add new options --xml,
--granularity, --buf-size, --format. Make --raw an alias for
--format=raw. Call new API if new parameters are in use.
* tools/virsh.pod (blockcopy): Document new options.
Signed-off-by: Eric Blake <eblake@redhat.com>
The usual portability fixes; and this includes a fix that adds
a new syntax check for double semicolons (commit 28de556 fixed
some, but gnulib found a better check).
* .gnulib: Update to latest.
* src/xenconfig/xen_common.c (xenFormatConfigCommon): Fix offender.
Signed-off-by: Eric Blake <eblake@redhat.com>
I'm about to extend the capabilities of blockcopy. Hiding a few
common lines of implementation gets in the way of the new required
logic, and putting the new logic in the common implementation won't
benefit any of the other blockjob operations. Therefore, it is
simpler to just do the work inline. There should be no semantic
change in this patch.
* tools/virsh-domain.c (blockJobImpl): Move block copy guts...
(cmdBlockCopy): ...into their lone caller.
Signed-off-by: Eric Blake <eblake@redhat.com>
Since 9f781da69d
Resolve a libvirtd crash in virStoragePoolSourceFindDuplicate()
when there is an existing SCSI pool defined with adapter type as
'scsi_host' and defining a new SCSI pool with adapter type as
'fc_host' and parent attribute missing or vice versa.
For example, if there is an existing SCSI pool with adapter type
as 'scsi_host' defined using the following XML
<pool type='scsi'>
<name>TEST_SCSI_POOL</name>
<source>
<adapter type='scsi_host' name='scsi_host1'/>
</source>
<target>
<path>/dev/disk/by-path</path>
</target>
</pool>
When defining another SCSI pool with adapter type as 'fc_host' using the
following XML will crash libvirtd
<pool type='scsi'>
<name>TEST_SCSI_FC_POOL</name>
<source>
<adapter type='fc_host' wwnn='1234567890abcdef' wwpn='abcdef1234567890'/>
</source>
<target>
<path>/dev/disk/by-path</path>
</target>
</pool>
Same is true for the reverse case as well where there exists a SCSI pool
with adapter type as 'fc_host' and another SCSI pool is defined with
adapter type as 'scsi_host'.
This happens because for fc_host 'name' is optional attribute whereas for
scsi_host its mandatory. However the check in libvirt for finding duplicate
storage pools didn't take that into account while comparing
Signed-off-by: Pradipta Kr. Banerjee <bpradip@in.ibm.com>
To date, anyone performing a block copy and pivot ends up with
the destination being treated as <disk type='file'>. While this
works for data access for a block device, it has at least one
noticeable shortcoming: virDomainGetBlockInfo() reports allocation
differently for block devices visited as files (the size of the
device) than for block devices visited as <disk type='block'>
(the maximum sector used, as reported by qemu); and this difference
is significant when trying to manage qcow2 format on block devices
that can be grown as needed.
Of course, the more powerful virDomainBlockCopy() API can already
express the ability to set the <disk> type. But a new API can't
be backported, while a new flag to an existing API can; and it is
also rather inconvenient to have to resort to the full power of
generating XML when just adding a flag to the older call will do
the trick. So this patch enhances blockcopy to let the user flag
when the resulting XML after the copy must list the device as
type='block'.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_REBASE_COPY_DEV):
New flag.
* src/libvirt.c (virDomainBlockRebase): Document it.
* tools/virsh-domain.c (opts_block_copy, blockJobImpl): Add
--blockdev option.
* tools/virsh.pod (blockcopy): Document it.
* src/qemu/qemu_driver.c (qemuDomainBlockRebase): Allow new flag.
(qemuDomainBlockCopy): Remember the flag, and make sure it is only
used on actual block devices.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Expose the new flag just added to virDomainGetBlockJobInfo.
With --raw, the presence or absence of --bytes determines which
flag to use in the single API call. Without --raw, the use of
--bytes forces an error if the server doesn't support it,
otherwise, the code tries to silently fall back to scaling the
MiB/s value.
My goal is to eventually also support --bytes in bandwidth mode;
but that's a bit further down the road (and needs a new API flag
added in libvirt.h first).
This changes the human output, but the previous patch added
raw output precisely so that we can have flexibility with the
human output. For this commit, I used qemu-monitor-command to
force an unusual bandwidth, but the same will be possible once
qemu implements virDomainBlockCopy:
Before:
Block Copy: [100 %] Bandwidth limit: 2 MiB/s
After:
Block Copy: [100 %] Bandwidth limit: 1048577 bytes/s (1.000 MiB/s)
The cache avoids having to repeatedly checking whether the flag
works when talking to an older server, when multiple blockjob
commands are issued during a batch session and the user is
manually polling for job completion.
* tools/virsh.h (_vshControl): Add a cache.
* tools/virsh.c (cmdConnect, vshReconnect): Initialize the cache.
* tools/virsh-domain.c (opts_block_job): Add --bytes.
* tools/virsh.pod (blockjob): Document this.
Signed-off-by: Eric Blake <eblake@redhat.com>
The current output of 'blockjob [--info]' is a single line
designed for human consumption; it's not very nice for machine
parsing. Furthermore, I have plans to modify the line in
response to the new flag for controlling bandwidth units.
Solve that by adding a --raw parameter, which outputs
information closer to the C struct.
$ virsh blockjob testvm1 vda --raw
type=Block Copy
bandwidth=1
cur=197120
end=197120
The information is indented, because I'd like for a later patch
to add a mode that iterates over all the vm's disks with status
for each; in that mode, each block name would be listed unindented
before information (if any) about that block.
Now that we have a raw mode, we can guarantee that it won't change
format over time. Any app that cares about parsing the output can
try --raw, and if it fails, know that it was talking to an older
virsh and fall back to parsing the human-readable format which had
not changed until now; meanwhile, when not using --raw, we have
freed future virsh to change the output to whatever makes sense.
My first change to human mode: this command now guarantees a line
is printed on successful use of the API, even when the API did
not find a current block job (consistent with the rest of virsh).
Bonus: https://bugzilla.redhat.com/show_bug.cgi?id=1135441
complained that this message was confusing:
$ virsh blockjob test1 hda --async --bandwidth 10
error: conflict between --abort, --info, and --bandwidth modes
even though the man page already documents that --async implies
abort mode, all because '--abort' wasn't present in the command
line. Since I'm adding another case where options are tied
to or imply a mode, I changed that error to:
error: conflict between abort, info, and bandwidth modes
* tools/virsh-domain.c (cmdBlockJob): Add --raw parameter; tweak
error wording.
* tools/virsh.pod (blockjob): Document it.
Signed-off-by: Eric Blake <eblake@redhat.com>
I have plans to make future enhancements to the job list mode,
which will be easier to do if the common blockJobImpl function
is not mixing a query command with multiple modify commands.
Besides, it just feels weird that all callers to blockJobImpl
had to supply both a bandwidth input argument (unused for info
mode) and an info output argument (unused for all other modes);
not to mention I just made similar cleanups on the libvirtd
side.
The only reason blockJobImpl returned int was because of info
mode returning -1/0/1 (all other job API are -1/0), so that
can also be cleaned up. No user-visible changes in this commit.
* tools/virsh-domain.c (blockJobImpl): Change signature and return
value. Drop info handling.
(cmdBlockJob): Handle info here.
(cmdBlockCommit, cmdBlockCopy, cmdBlockPull): Adjust callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
While reviewing the new virDomainBlockCopy API, Peter Krempa
pointed out that our existing design of using MiB/s for block
job bandwidth is rather coarse, especially since qemu tracks
it in bytes/s; so virDomainBlockCopy only accepts bytes/s.
But once the new API is implemented for qemu, we will be in
the situation where it is possible to set a value that cannot
be accurately reflected back to the user, because the existing
virDomainGetBlockJobInfo defaults to the coarser units.
Fortunately, we have an escape hatch; and one that has already
served us well in the past: we can use the flags argument to
specify which scale to use (see virDomainBlockResize for prior
art). This patch fixes the query side of the API; made easier
by previous patches that split the query side out from the
modification code. Later patches will address the virsh
interface, as well retrofitting all other blockjob APIs to
also accept a flag for toggling bandwidth units.
* include/libvirt/libvirt.h.in (_virDomainBlockJobInfo)
(VIR_DOMAIN_BLOCK_COPY_BANDWIDTH): Document sizing issues.
(virDomainBlockJobInfoFlags): New enum.
* src/libvirt.c (virDomainGetBlockJobInfo): Document new flag.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJobInfo): Add parameter.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJobInfo): Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockJobInfo):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJobInfo)
(qemuMonitorJSONGetBlockJobInfoOne): Likewise. Don't scale here.
* src/qemu/qemu_migration.c (qemuMigrationDriveMirror): Update
callers.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl): Likewise.
(qemuDomainGetBlockJobInfo): Likewise, and support new flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
The previous patch hoisted some bounds checks to the callers;
but someone that is not aware of the hoisted check could now
try passing an integer between LLONG_MAX and ULLONG_MAX. As a
safety measure, add new json conversion modes that let libvirt
error out early instead of pass bad numbers to qemu, if the
caller ever makes a mistake due to later refactoring.
Convert the various blockjob QMP calls to use the new modes,
and switch some of them to be optional (QMP has always supported
an omitted "speed" the same as "speed":0, for everything except
block-job-set-speed).
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONMakeCommandRaw):
Add 'j'/'y' and 'J'/'Y' to error out on negative input.
(qemuMonitorJSONDriveMirror, qemuMonitorJSONBlockCommit)
(qemuMonitorJSONBlockJob): Use it.
Signed-off-by: Eric Blake <eblake@redhat.com>
