It would be used in qemumonitorjsontest, thus we make it non-static.
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: Zhou Yimin <zhouyimin@huawei.com>
Trying to use qemu:///session to create a storage pool pointing at
/tmp will usually fail with something like:
$ virsh pool-start tmp
error: Failed to start pool tmp
error: cannot open volume '/tmp/systemd-private-c38cf0418d7a4734a66a8175996c384f-colord.service-kEyiTA': Permission denied
If any volume in an FS pool can't be opened by the daemon, the refresh
fails, and the pool can't be used.
This causes pain for virt-install/virt-manager though. Imaging a user
downloads a disk image to /tmp. virt-manager wants to import /tmp as
a storage pool, so we can detect what disk format it is, and set the
XML correctly. However this case will likely fail as explained above.
Change the logic here to skip volumes that fail to open. This could
conceivably cause user complaints along the lines of 'why doesn't
libvirt show $ROOT-OWNED-VOLUME-FOO', but figuring that currently
the pool won't even startup, I don't think there are any current
users that care about that case.
https://bugzilla.redhat.com/show_bug.cgi?id=1103308
If you end up with a state file for a pool that no longer starts up
or refreshes correctly, the state file is never removed and adds
noise to the logs everytime libvirtd is started.
If the initial state syncing fails, delete the statefile.
After pool startup we call refreshPool(). If that fails, we leave
a stale pool state file hanging around.
Hit this trying to create a pool with qemu:///session containing
root owned files.
If we received zero iothreads from the monitor, but were perhaps
expecting to receive something, then the code was skipping the check
to ensure what's in the monitor matches our expectations. So invert
the checks to check that what we get back matches expectations and
then check there are zero iothreads returned.
Rather than have a separate routine to parse the alias of an iothread
returned from qemu in order to get the iothread_id value, parse the alias
when returning and just return the iothread_id in qemuMonitorIOThreadInfoPtr
This set of patches removes the function, changes the "char *name" to
"unsigned int" and handles all the fallout.
Build with clang fails with:
CC conf/libvirt_conf_la-domain_conf.lo
conf/domain_conf.c:13377:9: error: variable 'cpumask' is used
uninitialized whenever 'if' condition is true
[-Werror,-Wsometimes-uninitialized]
if (!(tmp = virXMLPropString(node, "cpuset"))) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
and many other similar errors regarding the 'cpuset' variable.
Fix by explicitly initializing it with NULL.
If someone has updated a network to change its bridge name, but the
network is still active (so that bridge name hasn't taken effect yet),
we still want to disallow another network from taking that new name.
Since some people use the same naming convention as libvirt for bridge
devices they create outside the context of libvirt, it is much nicer
if we check for those devices when looking for a bridge device name to
auto-assign to a new network.
We already check that any auto-assigned bridge device name for a
virtual network (e.g. "virbr1") doesn't conflict with the bridge name
for any existing libvirt network (via virNetworkSetBridgeName() in
conf/network_conf.c).
We also want to check that the name doesn't conflict with any bridge
device created on the host system outside the control of libvirt
(history: possibly due to the ploriferation of references to libvirt's
bridge devices in HOWTO documents all around the web, it is not
uncommon for an admin to manually create a bridge in their host's
system network config and name it "virbrX"). To add such a check to
virNetworkBridgeInUse() (which is called by virNetworkSetBridgeName())
we would have to call virNetDevExists() (from util/virnetdev.c); this
function calls ioctl(SIOCGIFFLAGS), which everyone on the mailing list
agreed should not be done from an XML parsing function in the conf
directory.
To remedy that problem, this patch removes virNetworkSetBridgeName()
from conf/network_conf.c and puts an identically functioning
networkBridgeNameValidate() in network/bridge_driver.c (because it's
reasonable for the bridge driver to call virNetDevExists(), although
we don't do that yet because I wanted this patch to have as close to 0
effect on function as possible).
There are a couple of inevitable changes though:
1) We no longer check the bridge name during
virNetworkLoadConfig(). Close examination of the code shows that
this wasn't necessary anyway - the only *correct* way to get XML
into the config files is via networkDefine(), and networkDefine()
will always call networkValidate(), which previously called
virNetworkSetBridgeName() (and now calls
networkBridgeNameValidate()). This means that the only way the
bridge name can be unset during virNetworkLoadConfig() is if
someone edited the config file on disk by hand (which we explicitly
prohibit).
2) Just on the off chance that somebody *has* edited the file by hand,
rather than crashing when they try to start their malformed
network, a check for non-NULL bridge name has been added to
networkStartNetworkVirtual().
(For those wondering why I don't instead call
networkValidateBridgeName() there to set a bridge name if one
wasn't present - the problem is that during
networkStartNetworkVirtual(), the lock for the network being
started has already been acquired, but the lock for the network
list itself *has not* (because we aren't adding/removing a
network). But virNetworkBridgeInuse() iterates through *all*
networks (including this one) and locks each network as it is
checked for a duplicate entry; it is necessary to lock each network
even before checking if it is the designated "skip" network because
otherwise some other thread might acquire the list lock and delete
the very entry we're examining. In the end, permitting a setting of
the bridge name during network start would require that we lock the
entire network list during any networkStartNetwork(), which
eliminates a *lot* of parallelism that we've worked so hard to
achieve (it can make a huge difference during libvirtd startup). So
rather than try to adjust for someone playing against the rules, I
choose to instead give them the error they deserve.)
3) virNetworkAllocateBridge() (now removed) would leak any "template"
string set as the bridge name. Its replacement
networkFindUnusedBridgeName() doesn't leak the template string - it
is properly freed.
Coverity notes that the switch() used to check 'connected' values has
two DEADCODE paths (_DEFAULT & _LAST). Since 'connected' is a boolean
it can only be one or the other (CONNECTED or DISCONNECTED), so it just
seems pointless to use a switch to get "all" values. Convert to if-else
Add qemuDomainAddIOThread and qemuDomainDelIOThread in order to add or
remove an IOThread to/from the host either for live or config optoins
The implementation for the 'live' option will use the iothreadpids list
in order to make decision, while the 'config' option will use the
iothreadids list. Additionally, for deletion each may have to adjust
the iothreadpin list.
IOThreads are implemented by qmp objects, the code makes use of the existing
qemuMonitorAddObject or qemuMonitorDelObject APIs.
Signed-off-by: John Ferlan <jferlan@redhat.com>
We're about to allow IOThreads to be deleted, but an iothreadid may be
included in some domain thread sched, so add a new API to allow removing
an iothread from some entry.
Then during the writing of the threadsched data and an additional check
to determine whether the bitmap is all clear before writing it out.
With iothreadid's allowing any 'id' value for an iothread_id, the
iothreadsched code needs a slight adjustment to allow for "any"
unsigned int value in order to create the bitmap of ids that will
have scheduler adjustments. Adjusted the doc description as well.
Remove the iothreadspin array from cputune and replace with a cpumask
to be stored in the iothreadids list.
Adjust the test output because our printing goes in order of the iothreadids
list now.
Since it's only ever referenced in domain_conf.c, make the function
static, but also will need to move it to somewhere before it's referenced
rather than forward referencing it.
Add 'thread_id' to the virDomainIOThreadIDDef as a means to store the
'thread_id' as returned from the live qemu monitor data.
Remove the iothreadpids list from _qemuDomainObjPrivate and replace with
the new iothreadids 'thread_id' element.
Rather than use the default numbering scheme of 1..number of iothreads
defined for the domain, use the iothreadid's list for the iothread_id
Since iothreadids list keeps track of the iothread_id's, these are
now used in place of the many places where a for loop would "know"
that the ID was "+ 1" from the array element.
The new tests ensure usage of the <iothreadid> values for an exact number
of iothreads and the usage of a smaller number of <iothreadid> values than
iothreads that exist (and usage of the default numbering scheme).
Adding a new XML element 'iothreadids' in order to allow defining
specific IOThread ID's rather than relying on the algorithm to assign
IOThread ID's starting at 1 and incrementing to iothreads count.
This will allow future patches to be able to add new IOThreads by
a specific iothread_id and of course delete any exisiting IOThread.
Each iothreadids element will have 'n' <iothread> children elements
which will have attribute "id". The "id" will allow for definition
of any "valid" (eg > 0) iothread_id value.
On input, if any <iothreadids> <iothread>'s are provided, they will
be marked so that we only print out what we read in.
On input, if no <iothreadids> are provided, the PostParse code will
self generate a list of ID's starting at 1 and going to the number
of iothreads defined for the domain (just like the current algorithm
numbering scheme). A future patch will rework the existing algorithm
to make use of the iothreadids list.
On output, only print out the <iothreadids> if they were read in.
In a lot places we use path like this:
$(srcdir)/../src/....
when in fact it can be:
$(top_srcdir)/src/
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The lookup is just for check whether a domain we are about to add does
not already exists. Well, the virDomainObjListAdd() function does that
for us already so there's no need to duplicate the check.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
use virNetworkRouteDefFree() instead of VIR_FREE to free routes, otherwise
the element 'family' would not be freed.
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
use cleanup instead of error, so that the allocated strings could also get freed
when there's no error.
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
virBufferContentAndReset() doesn't free buf contents, we should use
virBufferFreeAndReset() to get buf freed.
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
If a user hot-attaches the guest agent channel libvirt would ignore it
until the restart of libvirtd or shutdown/destroy and start of the VM
itself.
This patch adds code that opens or closes the guest agent connection
according to the state of the guest agent channel according to
connect/disconnect events.
To allow opening the channel from the event handler qemuConnectAgent
needed to be exported.
When the guest agent channel gets hotplugged to a VM, libvirt would
still report that "QEMU guest agent is not configured" rather than
stating that the connection was not established yet.
Currently the code won't be able to connect to the agent after hotplug
but that will change in a later patch.
As the qemuFindAgentConfig() helper is quite helpful in this case move
it to a more usable place and export it.
Rearrange code so that the local variable is always initialized and
disposed.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Jim Fehlig <jfehlig@suse.com>
Commit bf32462b missed initializing sdl.opengl. Without the
initialization, libvirtd will be terminated by an assert from libxl:
Assertion `!libxl_defbool_is_default(db)' failed.
Reported-by: Olaf Hering <olaf@aepfle.de>
If the domU configu has sdl enabled libvirtd crashes:
libvirtd[5158]: libvirtd: libxl.c:343: libxl_defbool_val:
Assertion `!libxl_defbool_is_default(db)' failed.
Initialize the relevant defbool variables in libxl_device_vfb.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Jim Fehlig <jfehlig@suse.com>
Since net->model is not defined for containers we shouldn't touch it.
In case network adapter model is defined, a warning about ignoring
it is shown.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
Fix for such a case:
1. Domain A and B xml contain the same SRIOV net hostdev(<interface
type='hostdev' /> with same pci address).
2. virsh start A (Successfully, and configure the SRIOV net with
custom mac)
3. virsh start B (Fail because of the hostdev used by domain A or other
reason.)
In step 3, 'virHostdevNetConfigRestore' is called for the hostdev
which is still used by domain A. It makes the mac/vlan of the SRIOV net
change.
Code Change in this fix:
1. As the pci used by other domain have been removed from
'pcidevs' in previous loop, we only restore the nic config for
the hostdev still in 'pcidevs'(used by this domain)
2. update the comments to make it more clear
Signed-off-by: Huanle Han <hanxueluo@gmail.com>
Refactor some code to create a static function virHostdevIsPCINetDevice
which will detect whether the hostdev is a pci net device or not.
Signed-off-by: Huanle Han <hanxueluo@gmail.com>
virDomainGetJobStats is able to report statistics of a completed
migration, however to get usable downtime and total time statistics both
hosts have to keep synchronized time. To provide at least some
estimation of the times even when NTP daemons are not running on both
hosts we can just ignore the time needed to transfer a migration cookie
to the destination host. The result will be also inaccurate but a bit
more predictable. The total/down time will just be at least what we
report.
https://bugzilla.redhat.com/show_bug.cgi?id=1213434
Commit 1268820a removed obsolete index() function and replaced it by
strchr. Few versions of gcc has a bug and reports a warning about
strchr:
../../src/util/virstring.c:1006: error: logical '&&' with non-zero
constant will always evaluate as true [-Wlogical-op]
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
ListFindByID() still requires to step through items in the hash table
(in the worst case scenario through all of them), lock each one and
compare whether we've found what we're looking for. This is suboptimal
as locking a domain object means we need to wait for the current API
running over the object to finish.
Unfortunately, we can't drop the function completely because we have
this public API virDomainLookupByID which we can't drop.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This hash table will contain the same data as already existing one.
The only difference is that while the first table uses domain uuid as
key, the new table uses domain name. This will allow much faster (and
lockless) lookups by domain name.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Every domain that grabs a domain object to work over should
reference it to make sure it won't disappear meanwhile.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is basically turning qemuDomObjEndAPI into a more general
function. Other drivers which gets a reference to domain objects may
benefit from this function too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since we haven't implemented balloon parameters tuning
we can just return amount of memory in this function.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Commit 2a530a3e5 is not portable to mingw, which intentionally
avoids declaring the obsolete index(). See also:
https://bugzilla.redhat.com/show_bug.cgi?id=1214605
* src/util/virstring.c (virStringStripControlChars): Use strchr.
Signed-off-by: Eric Blake <eblake@redhat.com>
CT stands for containers, i.e. def->os.type should be compared with VIR_DOMAIN_OSTYPE_EXE
rather than VIR_DOMAIN_OSTYPE_HVM
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
Instead of each API copying the same lines of code, lets use the
generic function designed just for that purpose.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of each API copying the same lines of code, lets use the
generic function designed just for that purpose. At the same time,
drop useless connection object locking in some functions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function is practically copied over from qemu driver. Its
only purpose in life is to lookup a domain object and print an
error if no object is found.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The pointer does not change throughout the while life of a
parallels connection. Mark it as such.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
just as what b8e25c35d7 did, we
fall back to the ACPI method when the guest agent is unresponsive
in qemuDomainReboot().
Signed-off-by: YueWenyuan <yuewenyuan@huawei.com>
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some hypervisors like Xen do not have PIDs associated with domains.
Relax the requirement for PID != 0 in the locking code so it can
be used by hypervisors that do not represent domains as a process
running on the host.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
When running on FreeBSD, there's a bug in virCommandProcessIO
polling that is triggered by the commandtest.
A test that triggers EPIPE in commandtest (named "test20") hungs
forever on FreeBSD.
Apparently, this happens because FreeBSD sets POLLHUP flag on revents
when stdin in closed. And as the current implementation only checks for
POLLOUT and POLLERR, it ends up looping forever inside
virCommandProcessIO and not trying to do one more write() that would
trigger EPIPE.
To fix that check for the POLLHUP flag along with POLLOUT and POLLERR.
When a user would specify a backing chain index that is above the start
point libvirt would report a rather unhelpful error:
invalid argument: could not find backing store 1 in chain for 'sub/link2'
This patch adds an explicit check that the index is below start point in
the backing store and reports the following error if not:
invalid argument: requested backing store index 1 is above 'sub/../qcow2' in chain for 'sub/link2'
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1177062
Some storage protocols allow to have the @path field in struct
virStorageSource set to NULL. Add NULLSTR() wrappers to handle this
possibility until I finish the storage source error formatter.
Build fails on non-Linux systems with this error:
CC util/libvirt_util_la-virnetdev.lo
util/virnetdev.c:364:1: error: unused function 'virNetDevReplaceMacAddress' [-Werror,-Wunused-function]
virNetDevReplaceMacAddress(const char *linkdev,
^
util/virnetdev.c:406:1: error: unused function 'virNetDevRestoreMacAddress' [-Werror,-Wunused-function]
virNetDevRestoreMacAddress(const char *linkdev,
^
2 errors generated.
The virNetDev{Restore,Replace}MacAddress() functions are only used
by VF-related routines that are available on Linux only. So move these
functions under the same #ifdef.
Because packets going through the egress from a bridge (where our
bandwidth limiting takes place) have no information about which
interface they came from, the QoS rules that we create instead
use the source MAC address of the packets to make their decisions
about which QDisc the packet should be in.
One flaw in this is that when a guest changed the MAC address it
used, packets from the guest would no longer be put into the
correct QDisc, but would instead be put in an "unprivileged"
class, resulting in the bandwidth "floor" (minimum guaranteed)
being no longer honored.
Now that libvirt has infrastructure to capture and respond to
RX_FILTER_CHANGE events from qemu (sent whenever a guest
interface modifies its MAC address, among other things), we can
notice when a guest MAC address changes, and update the QoS rules
accordingly, so that bandwidth floor is honored even after a
guest MAC address change.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In one of my previous patches (b68a56bcfe) I made class_id to
format more frequently. Well, now it's formatting way too
frequent - even for regular active XML. Users don't need to see
it, so lets format it only for the status XML where it's really
needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
qemuDomainSetMemoryFlags() would allow to set the initial memory greater
than the <maxMemory> field. While the configuration would not work as
memory hotplug requires NUMA to be enabled and the
qemuDomainSetMemoryFlags() API does not work on NUMA guests this just
fixes a corner case.
The fix is still worth though as it allows to induce an invalid
configuration and make the VM vanish on libvirt restart.
Additionally this tweaks error message to be more accurate.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Introduce libxl.conf configuration file, adding the 'autoballoon'
setting as the first knob for controlling the libxl driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
A further fix for:
https://bugzilla.redhat.com/show_bug.cgi?id=1113474
Since there is no possibility that any type of macvtap will work if
the parent physdev it's attached to is offline, we should bring the
physdev online at the same time as the macvtap. When taking the
macvtap offline, it's also necessary to take the physdev offline for
macvtap passthrough mode (because the physdev has the same MAC address
as the macvtap device, so could potentially cause problems with
misdirected packets during migration, as outlined in commits 829770
and 879c13). We can't set the physdev offline for other macvtap modes
1) because there may be other macvtap devices attached to the same
physdev (and/or the host itself may be using the device) in the other
modes whereas passthrough mode is exclusive to one macvtap at a time,
and 2) there's no practical reason to do so anyway.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1113474
When we set the MAC address of a network device as a part of setting
up macvtap "passthrough" mode (where the domain has an emulated netdev
connected to a host macvtap device that has exclusive use of the
physical device, and sets the device MAC address to match its own,
i.e. "<interface type='direct'> <source mode='passthrough' .../>"), we
use ioctl(SIOCSIFHWADDR) giving it the name of that device. This is
true even if it is an SRIOV Virtual Function (VF).
But, when we are setting the MAC address / vlan ID of a VF in
preparation for "hostdev network" passthrough (this is where we set
the MAC address and vlan id of the VF after detaching the host net
driver and before assigning the device to the domain with PCI
passthrough, i.e. "<interface type='hostdev'>", we do the setting via
a netlink RTM_SETLINK message for that VF's Physical Function (PF),
telling it the VF# we want to change. This sets an "administratively
changed MAC" flag for that VF in the PF's driver, and from that point
on (until the PF driver is reloaded, *not* merely the VF driver) that
VF's MAC address can't be changed using ioctl(SIOCSIFHWADDR) - the
only way to change it is via the PF with RTM_SETLINK.
This means that if a VF is used for hostdev passthrough, it will have
the admin flag set, and future attempts to use that VF for macvtap
passthrough will fail.
The solution to this problem is to check if the device being used for
macvtap passthrough is actually a VF; if so, we use the netlink
RTM_SETLINK message to the PF to set the VF's mac address instead of
ioctl(SIOCSIFHWADDR) directly to the VF; if not, behavior does not
change from previously.
There are three pieces to making this work:
1) virNetDevMacVLan(Create|Delete)WithVPortProfile() now call
virNetDev(Replace|Restore)NetConfig() rather than
virNetDev(Replace|Restore)MacAddress() (simply passing -1 for VF#
and vlanid).
2) virNetDev(Replace|Restore)NetConfig() check to see if the device is
a VF. If so, they find the PF's name and VF#, allowing them to call
virNetDev(Replace|Restore)VfConfig().
3) To prevent mixups when detaching a macvtap passthrough device that
had been attached while running an older version of libvirt,
virNetDevRestoreVfConfig() is potentially given the preserved name
of the VF, and if the proper statefile for a VF can't be found in
the stateDir (${stateDir}/${pfname}_vf${vfid}),
virNetDevRestoreMacAddress() is called instead (which will look in
the file named ${stateDir}/${vfname}).
This problem has existed in every version of libvirt that has both
macvtap passthrough and interface type='hostdev'. Fortunately people
seem to use one or the other though, so it hasn't caused any real
world problem reports.
- Remove all qemu emulators
- Restart libvirtd
- Install qemu emulators
- Call 'virsh version' -> errors
The only thing that will force the qemu driver to refresh it's cached
capablities info is an explict API call to GetCapabilities.
However in the case when the initial caps lookup at driver connect didn't
find a single qemu emulator to poll, the driver is effectively useless
and really can't do anything until it's populated some qemu capabilities
info.
With the above steps, the user would have to either know about the
magic refresh capabilities call, or restart libvirtd to pick up the
changes.
Instead, this patch changes things so that every time a part of th
driver requests access to capabilities info, check to see if
we've previously seen any emulators. If not, force a refresh.
In the case of 'still no emulators found', this is still very quick, so
I can't think of a downside.
https://bugzilla.redhat.com/show_bug.cgi?id=1000116
https://bugzilla.redhat.com/show_bug.cgi?id=1171933
Adjust the processLU error returns to be a bit more logical. Currently,
the calling code cannot determine the difference between a non disk/lun
volume and a processed/found disk/lun. It can also not differentiate
between perhaps real/fatal error and one that won't necessarily stop
the code from finding other volumes.
After this patch virStorageBackendSCSIFindLUsInternal will stop processing
as soon as a "fatal" message occurs rather than continuting processing
for no apparent reason. It will also only set the *found value when
at least one of the processLU's was successful.
With the failed return, if the reason for the stop was that the pool
target path did not exist, was /dev, was /dev/, or did not start with
/dev, then iSCSI pool startup and refresh will fail.
Rather than passing/returning a pointer to a boolean to indicate that
perhaps we should try again - adjust the return of the call to return
the count of LU's found during processing, then let the caller decide
what to do with that value.
Use virStorageBackendPoolUseDevPath API to determine whether creation of
stable target path is possible for the volume.
This will differentiate a failed virStorageBackendStablePath which won't
need to be fatal. Thus, we'll add a -2 return value to differentiate that
the failure was a result of either the inability to find the symlink for
the device or failure to open the target path directory
For virStorageBackendStablePath, in order to make decisions in other code
split out the checks regarding whether the pool's target is empty, using /dev,
using /dev/, or doesn't start with /dev
Commit 70f446631f (from 2008) introduced
some functions for testing whether xend was returning correct sound
models. Those functions have long gone, but the function prototypes
remain. This commit removes the unused prototypes.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
This needs to specified in way too many places for a simple validation
check. The ostype/arch/virttype validation checks later in
DomainDefParseXML should catch most of the cases that this was covering.
This revealed that GuestDefaultEmulator was a bit buggy, capable
of returning an emulator that didn't match the passed domain type. Fix
up the test suite input to continue to pass.
This is a helper function to look up all capabilities data for all
the OS bits that are relevant to <domain>. This is
- os type
- arch
- domain type
- emulator
- machine type
This will be used to replace several functions in later commits.
But the internal API stays the same, and we just convert the value as
needed. Not useful yet, but this is the beginning step of using an enum
for ostype throughout the code.
When parsing XML, we validate the passed ostype + arch combo against
the detected hypervisor capabilities. This has led to the following
problem:
- Define x86 qemu guest
- qemu is inadvertently removed from the host
- libvirtd is restarted. fails to parse VM config since arch is removed
- 'virsh list --all' is now empty, user is wondering where their VMs went
Add a new internal flag VIR_DOMAIN_DEF_PARSE_SKIP_OSTYPE_CHECKS. Use
it when loading VM and snapshot configs from disk.
https://bugzilla.redhat.com/show_bug.cgi?id=1043572
If no <os><type> was specified:
before: unknown OS type no OS type
after : xml error: an os <type> must be specified
If an <os><type> is specified that's not in our capabiliities data:
before: unknown OS type: $type
after : unsupported configuration: no support found for os <type> '$type'
VIR_ERR_OS_TYPE is now unused (as it should be frankly) so drop its strings
as well to save our translators some effort.
In Parallels we do not support device name hints
aka <target dev=../> option and full-fledged device
disk device addressing through
<address type=.. controller=.. bus=.. target=.. unit=../>
and have only one index instead.
In this situation to be consistent we can only take
one-to-one mapping from some reasonable subset
of full address. Values outside this subset are
invalid to create Parallels VMs.
Reasonable mapping is default one defined in virDomainDiskDefAssignAddress.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@parallels.com>
We should return VIR_DRV_OPEN_ERROR in case
if we handle scheme in query but some
error occur. Previously we sometimes
return VIR_DRV_OPEN_DECLINE.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@parallels.com>
# virsh -c lxc:/// start helloworld
error: Failed to start domain helloworld
error: internal error: guest failed to start: Unknown
failure in libvirt_lxc startup
Return success when there are no cpuset.mems to be set,
instead of failing without setting an error.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
# virsh -c lxc:/// start helloworld
error: Failed to start domain helloworld
error: internal error: guest failed to start: Invalid value '1-3'
for 'cpuset.mems': Invalid argument
Free the cpu mask to avoid reusing it as a mem mask
in virCgroupSetCpusetMems
if virDomainNumatuneMaybeFormatNodeset does not set a mask.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1209948
So we have this bug. The virConnectGetDomainCapabilities() API
performs a couple of checks before it produces any result. One of
the checks is if the architecture requested by user can be run by
the binary (again user provided). However, the check is pretty
dumb. It merely compares if the default binary architecture
matches the one provided by user. However, a qemu binary can run
multiple architectures. For instance: qemu-system-ppc64 can run:
ppc, ppcle, ppc64, ppc64le and ppcemb. The default is ppc64, so
if user requested something else, like ppc64le, the check would
have failed without obvious reason.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When a qemu domain is to be rebooted, from outside, at libvirt
level it looks like regular shutdown. To really restart the
domain, libvirt needs to issue reset command on the monitor once
SHUTDOWN event appeared. So, in order to differentiate bare
shutdown and reboot libvirt uses a variable within domain private
data. It's called fakeReboot. When the reboot API is called, the
variable is set, but when the shutdown API is called it must be
cleared out. But it was not for every possible case. So if user
called virDomainReboot(), and there was no ACPI daemon running
inside the guest (so guest didn't initiated shutdown sequence)
and then virDomainShutdown(mode=agent) was called bad thing
happened. We remembered the fakeReboot and instead of shutting
the domain down, we just rebooted it.
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is a simple wrapper around virNetDevBandwidthManipulateFilter() that
will update the desired filter on an interface (usually a network bridge)
with a new MAC address. Although, the MAC address in question usually
refers to some other interface - the one that the filter is constructed
for. Yeah, hard to parse. Thing is, our NATed network has a bridge where
some part of QoS takes place. And vNICs from guests are plugged into
the bridge. However, if a guest decides to change the MAC of its vNIC,
the corresponding qemu process emits an event which we can use to
update the QoS configuration based on the new MAC address.. However,
our QoS hierarchy is currently not notified, therefore it falls apart.
This function (when called in response to the aforementioned event)
will update our QoS hierarchy and duct tape it together again.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Not only this simplifies the code a bit, it prepares the
environment for upcoming patches. The new
virNetDevBandwidthManipulateFilter() function is capable of both
removing a filter and adding a new one. At the same time! Yeah,
this is not currently used anywhere but look at the next commit
where you'll see it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, when constructing traffic shaping rules, the ingress
filter is created without any priority specified on the command
line. This makes kernel to make up one. While this works, it
simplifies things a bit if we provide the filter priority. In
this case, since it's the root filter lets give it the highest
priority of number 1.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After a360912179 the formatting of virDomainActualNetDefPtr was
changed a bit. However, during the function rewrite, iface's class_id
is not formatted as frequently as it could be. In fact, after rewrite
it's formatted only for iface of type VIR_DOMAIN_NET_TYPE_DIRECT where
it makes no sense and is unused. While where needed (_TYPE_NETWORK) is
not formatted at all. This makes the daemon forget it upon daemon
restart resulting in bad behaviour.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1211436
This reverts commit b7829f959b.
The previous fix was not correct. Like everywhere else, a driver is a
global variable allocated in stateInitialize function (or something
similar for stateless drivers). Later, when a driver API is called,
it's possible that the global variable is accessed and dereferenced.
Now, some drivers require root privileges because they undertake some
actions reserved only for the system admin (e.g. manipulating host
firewall). And here's the trouble, the NWFilter state initializer
exited too early when finding out it's running unprivileged, leaving
the global NWFilter driver variable uninitialized. Any subsequent
API call that tried to lock the driver resulted in dereferencing the
driver and thus crash.
On the other hand, in order to not resurrect the bug the original
commit was fixing, Let's forbid the nwfilter define in session mode.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Conflicts:
src/nwfilter/nwfilter_driver.c: Context. Code changed a bit
since 2013.
There is a possibility that we jump onto error label with @lockpath
still initialized to NULL. Here, the @lockpath should be unlink()-ed,
but passing there a NULL is not a good idea. Don't do that. In fact,
we should call unlink() only if we created the lock file successfully.
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The 802.11 interfaces can not be moved by themselves, their Phy has to move too.
If there are other interfaces, they have to move too -- hopefully it's not too
confusing. This is a less-invasive alternative to defining a new hostdev type
for PHYs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
A destroy operation can take considerable time on large memory
domains due to scrubbing the domain's memory. Unlock the
virDomainObj while libxl_domain_destroy is executing.
Implement libxlDomainDestroyInternal wrapper to handle unlocking,
calling destroy, and locking. Change all callers of
libxl_domain_destroy to use the wrapper.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
A job should be acquired at the beginning of a domain destroy operation,
not at the end when cleaning up the domain. Fix two occurrences of this
late job acquisition in the libxl driver. Doing so renders
libxlDomainCleanupJob unused, so it is removed.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Let callers of libxlDomainStart decide when it is appropriate to
acquire a job on the associated virDomainObj.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Add support for HVM direct kernel boot in libxl. Also add a
test to verify domXML <-> native conversions.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
In xl config, hvmloader is implied for hvm guests. It is not
specified with the "kernel" option like xm config. The "kernel"
option, along with "ramdisk" and "extra", is used for HVM direct
kernel boot. Instead of using "kernel" option to populate
virDomainDef object's os.loader->path, use hvmloader discovered
when gathering capabilities.
This change required fixing initialization of capabilities in
the test utils and removing 'kernel = "/usr/lib/xen/boot/hvmloader"'
from the test config files.
xl and xm differ a bit in how <os> configuration is represented.
E.g. xl config supports <os><nvram .../></os> via its "bios"
setting.
Move the xenParseOS and xenFormatOS functions from xen_common.c
and copy to xen_xl.c and xen_xm.c so they can be customized for
xm vs xl config. An unfortunate fallout is reordering of entries
in the test config files.
device_model is parsed in xenParseOS(), then later in
xenParseConfigCommon(). <emulator> is not part of <os>,
so makes sense to remove the parsing in xenParseOS().
On rhel-6 is broken gcc that reports this warning:
util/virbuffer.c:500: error: logical '&&' with non-zero constant will
always evaluate as true [-Wlogical-op]
Move the pragma directive before function virBufferEscapeString because
since commit aeb5262e this function uses 'strchr' too.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
ts.tv_nsec was off by a factor of 1000, making timeouts less than a
second in the future often expiring immediately.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Among all the monitor APIs some where checking if mon is NULL and some
were not. Since it's possible to have mon equal to NULL in case a second
call is attempted once entered the monitor. This requires that every
single API checks for the monitor.
This patch adds a macro that helps checking the state of the monitor and
either refactors existing checking code to use the macro or adds it in
case it was missing.
Rather than erroring out make the best attempt to retrieve other data if
disks are inaccessible or missing. The failure will still be logged
though.
Since the bulk stats API is called on multiple domains an error like
this makes the API unusable. This regression was introduced by commit
596a137134
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1209394
The comment is describing arguments passed to the function.
However, there's no @ifmac argument. In 955af4d4 it was replaced
with @ifmac_ptr. Unfortunately, the comment wasn't updated.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add virStringHasControlChars that checks if the string has
any control characters other than \t\r\n,
and virStringStripControlChars that removes them in-place.
Throughout the code, we have several places need to construct a path
somewhere in /sys/class/net/... They are not consistent and nearly
each code piece invents its own way how to do it. So unify this by:
1) use virNetDevSysfsFile() wherever possible
2) At least use common macro SYSFS_NET_DIR declared in virnetdev.h at
the rest of places which can't go with 1)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If a virAsprintf() within the function fails, we call VIR_FREE()
over @rundir variable and jump onto cleanup label, where it is
freed again. It doesn't hurt, but not make much sense too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit f6563bc3 introduced HMP impl of the function (so that a different
uglier function could be removed). Before the HMP code is called there's
a leftover check that the monitor is JSON which inhibits the code from
working.
https://bugzilla.redhat.com/show_bug.cgi?id=1200149
Even though we have a mutex mechanism so that two clients don't spawn
two daemons, it's not strong enough. It can happen that while one
client is spawning the daemon, the other one fails to connect.
Basically two possible errors can happen:
error: Failed to connect socket to '/home/mprivozn/.cache/libvirt/libvirt-sock': Connection refused
or:
error: Failed to connect socket to '/home/mprivozn/.cache/libvirt/libvirt-sock': No such file or directory
The problem in both cases is, the daemon is only starting up, while we
are trying to connect (and fail). We should postpone the connecting
phase until the daemon is started (by the other thread that is
spawning it). In order to do that, create a file lock 'libvirt-lock'
in the directory where session daemon would create its socket. So even
when called from multiple processes, spawning a daemon will serialize
on the file lock. So only the first to come will spawn the daemon.
Tested-by: Richard W. M. Jones <rjones@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Two non-static functions in virjson.c were missing their export info in
libvirt_private.syms, so they couldn't be used anywhere it the code (and
that's about to get changed).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
