The system inhibitor locks are currently handled by code in the
virNetDaemon class. The driver code invokes a callback provided
by the daemon when it wants to start or end inhibition.
When the first inhibition is started, the daemon will call out
to logind to apply it system wide.
This has many flaws
* A single message is registered with logind regardless of
what driver holds the inhibition
* An inhibition of daemon shutdown can't be acquired
without also inhibiting system shutdown
* Config of the inhibitions cannot be tailored by the
driver
The new virInhibitor object addresses these:
* The object directly manages an inhibition with logind
privately to the driver, enabling custom messages to
be set.
* It is possible to acquire an inhibition locally to the
daemon without forwarding it to logind.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The exit-on-error=false argument of migrate-incoming tells the QEMU
process to keep running when incoming migration fails, which helps us in
two ways:
1. When migration enters Finish phase to cleanup the process, the domain
might not even exist on the destination (because it has already been
cleaned up by EOF monitor callback) and we would get rather unhelpful
"operation failed: domain is no longer running" error message.
2. We can get the error that caused incoming migration to fail directly
from QEMU via query-migrate QMP command.
https://issues.redhat.com/browse/RHEL-7041
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function is only used during incoming migration in the beginning of
Finish phase to detect if QEMU already died but EOF handler haven't had
a chance to do its job yet. It calls query-status QMP command, but
ignores the result. By calling query-migrate instead we can achieve the
same functionality if QEMU is dead and even get meaningful error from
"error-desc" in case the incoming migration failed and QEMU is still
running.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The exit-on-error argument (added in QEMU 9.1.0) can be used to tell
QEMU not to exit when incoming migration fails so that the error can be
retrieved via QMP. This patch adds a new capability bit indicating
support for the new argument.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As one of its arguments, the
virQEMUCapsProbeFullDeprecatedProperties() gets a pointer to
GStrv (a string list), which it may eventually replace. It's
single caller (virQEMUCapsProbeQMPHostCPU()) passes a string list
indeed. Now, when replacing one string list with another plain
g_free() is not enough as we need to free individual strings too.
==13573== 34 bytes in 8 blocks are definitely lost in loss record 271 of 576
==13573== at 0x4844878: malloc (vg_replace_malloc.c:446)
==13573== by 0x51789D1: g_malloc (in /usr/lib64/libglib-2.0.so.0.7800.6)
==13573== by 0x5193E82: g_strdup (in /usr/lib64/libglib-2.0.so.0.7800.6)
==13573== by 0x4997F73: g_strdup_inline (gstrfuncs.h:321)
==13573== by 0x4997F73: virJSONValueArrayToStringList (virjson.c:1296)
==13573== by 0x5027CF7: qemuMonitorJSONParseCPUModelExpansion (qemu_monitor_json.c:5139)
==13573== by 0x50281C9: qemuMonitorJSONGetCPUModelExpansion (qemu_monitor_json.c:5245)
==13573== by 0x501044F: qemuMonitorGetCPUModelExpansion (qemu_monitor.c:3261)
==13573== by 0x4F190D0: virQEMUCapsProbeQMPHostCPU (qemu_capabilities.c:3227)
==13573== by 0x4F2145E: virQEMUCapsInitQMPMonitor (qemu_capabilities.c:5758)
==13573== by 0x10FFF8: testQemuCaps (qemucapabilitiestest.c:111)
==13573== by 0x110B53: virTestRun (testutils.c:143)
==13573== by 0x11063E: doCapsTest (qemucapabilitiestest.c:200)
Fixes: 51c098347d
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
In my previous commit v10.10.0-48-g2d222ecf6e I've made us enable
I/O APIC when there is an IOMMU with EIM. This works well. What
does not work is case when there's just an IOMMU without EIM but
with 256+ vCPUS. Problem is that post parsing happens in two
stages: general domain post parse (where
qemuDomainDefEnableDefaultFeatures() is called) and then per
device post parse (where qemuDomainIOMMUDefPostParse() is
called). Now, in aforementioned case it is the device post parse
phase where EIM is enabled but the code that would enable
VIR_DOMAIN_FEATURE_IOAPIC has already run.
To resolve this, make the domain post parse callback "foresee"
the future enabling of EIM so that it can turn on I/O APIC
beforehand.
Resolves: https://issues.redhat.com/browse/RHEL-65844
Fixes: 2d222ecf6e
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
An RPM must own any directories its creates, unless it can guarantee a
dependancy has ownership. Two packages owning the same directory is fine
if permissions are consistent.
We don't require augeas as a dep in most packages, so we must own the
augeas lens directories. Likewise for systemtap tapset dirs.
Our own cpu map dir also needs ownership.
A few files are re-sorted, so that the files are listed immediately
adjacent to the %dir that contains them.
https://bugzilla.redhat.com/show_bug.cgi?id=2280979
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add a new a attribute, deprecated_features='on|off' to the <cpu>
element. This is used to toggle features flagged as deprecated on the
CPU model on or off. When this attribute is paired with 'on',
deprecated features will not be filtered. When paired with 'off', any
CPU features that are flagged as deprecated will be listed under the
CPU model with the 'disable' policy.
Example:
<cpu mode='host-model' check='partial' deprecated_features='off'/>
The absence of this attribute is equivalent to the 'on' option.
The deprecated features that will populate the domain XML are the same
features that result in the virsh domcapabilities command with the
--disable-deprecated-features argument present.
It is recommended to define a domain XML with this attribute set to
'off' to ensure migration to machines that may outright drop these
features in the future.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add a new flag, --disable-deprecated-features, to the domcapabilities
command. This will modify the output to show the 'host-model' CPU
with features flagged as deprecated paired with the 'disable' policy.
virsh domcapabilities --disable-deprecated-features
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
If flag VIR_CONNECT_GET_DOMAIN_CAPABILITIES_DISABLE_DEPRECATED_FEATURES
is passed to qemuConnectGetDomainCapabilities, then the domain's CPU
model features will be updated to set any deprecated features to the
'disabled' policy.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Introduce domain flag used to filter deprecated features from the
domain's CPU model.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add QEMU_CAPS_QUERY_CPU_MODEL_EXPANSION_DEPRECATED_PROPS for detecting
if query-cpu-model-expansion can report deprecated CPU model properties.
QEMU introduced this capability in 9.1 release. Add flag and deprecated
features to the capabilities test data for QEMU 9.1 and 9.2 replies/XML
since it can now be accounted for.
When probing for the host CPU, perform a full CPU model expansion to
retrieve the list of features deprecated across the entire architecture.
The list and count are stored in the host's CPU model info within the
QEMU capabilities. Other info resulting from this query (e.g. model
name, etc) is ignored.
The new capabilities flag is used to fence off the extra query for
architectures/QEMU binaries that do not report deprecated CPU model
features.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
query-cpu-model-expansion may report an array of deprecated properties.
This array is optional, and may not be supported for a particular
architecture or reported for a particular CPU model. If the output is
present, then capture it and store in a qemuMonitorCPUModelInfo struct
for later use.
The deprecated features will be retained in qemuCaps->kvm->hostCPU.info
and will be stored in the capabilities cache file under the <hostCPU>
element using the following format:
<deprecatedFeatures>
<property name='bpb'/>
<property name='csske'/>
<property name='cte'/>
<property name='te'/>
</deprecatedFeatures>
At this time the data is only queried, parsed, and cached. The data
will be utilized in a subsequent patch.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Refactor the CPU Model parsing functions within
qemuMonitorJSONGetCPUModelExpansion. The new functions,
qemuMonitorJSONParseCPUModelExpansionData and
qemuMonitorJSONParseCPUModelExpansion invoke the functions they
replace and leave room for a subsequent patch to handle parsing the
(optional) deprecated_props field resulting from the command.
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This is a follow up of my previous commits. If the number of
vCPUs exceeds some arbitrary value (255) then QEMU requires IOMMU
with EIM and intremap enabled. But in turn, intremap IOMMU
requires split I/O APIC (per virDomainDefIOMMUValidate()). Since
after my previous commits (e.g. v10.10.0-rc1~183) IOMMU is added
automagically, the I/O APIC can be also enabled automagically.
Relates to: https://issues.redhat.com/browse/RHEL-65844
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function return value is invariant since 18f3771, so change
its type and remove all dependent checks.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Reported-by: Pavel Nekrasov <p.nekrasov@fobos-nt.ru>
Signed-off-by: Alexander Kuznetsov <kuznetsovam@altlinux.org>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This function return value is invariant since 18f3771, so change
its type and remove all dependent checks.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Reported-by: Pavel Nekrasov <p.nekrasov@fobos-nt.ru>
Signed-off-by: Alexander Kuznetsov <kuznetsovam@altlinux.org>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This function return value is invariant since 18f3771, so change
its type and remove all dependent checks.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Reported-by: Pavel Nekrasov <p.nekrasov@fobos-nt.ru>
Signed-off-by: Alexander Kuznetsov <kuznetsovam@altlinux.org>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This function return value is invariant since 18f3771, so change
its type and remove all dependent checks.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Reported-by: Pavel Nekrasov <p.nekrasov@fobos-nt.ru>
Signed-off-by: Alexander Kuznetsov <kuznetsovam@altlinux.org>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
For the full history behind this patch, look at the following:
https://issues.redhat.com/browse/RHEL-7036
commit v10.7.0-101-ga37bd2a15b
commit v10.8.0-rc2-8-gbcd5ae4e73
Summary: original problem was unexpected failure of update-device when
the user hadn't changed anything other than online status of the guest
NIC (which should always be allowed).
The first commit "fixed" this by avoiding the allocation of a new
ActualNetDef (i.e. creating a new networkport) for *all* network
device updates (because that was inappropriately changing which
ethernet physdev should be used for a macvtap connection, which by
design can't be handled in an update-device).
But this commit caused a regression for update-device of bridge-based
network devices (because some the updates of certain attributes *do*
require the ActualNetDef be re-allocated), so...
The 2nd commit narrowed the list of network types that get the "don't
allocate new ActualNetDef" treatment (so that only interfaces
connected to a network that uses a pool of ethernet VFs *being used in
passthrough mode* qualify).
But then it was pointed out that this re-broke simple updates of
devices that used a direct/macvtap network in "bridge" mode (because
it's possible to list multiple physdevs to use for bridge mode, in
which case the network driver attempts to "load balance" (and so a new
allocation might have a different ethernet physdev which, again, can't
be supported in a device-update).
So this (single line of code) patch *widens* the list of network types
that don't allocate a new ActualNetDef to also include the other
direct (macvtap) modes, e.g. bridge, private, etc.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
These functions return value is invariant since VIR_EXPAND_N check
removal in 7d2fd6e, so change its type and remove all dependent checks.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Reported-by: Pavel Nekrasov <p.nekrasov@fobos-nt.ru>
Signed-off-by: Alexander Kuznetsov <kuznetsovam@altlinux.org>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This function return value is invariant since VIR_EXPAND_N check
removal in 7d2fd6e, so change its type and remove all dependent checks.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Reported-by: Pavel Nekrasov <p.nekrasov@fobos-nt.ru>
Signed-off-by: Alexander Kuznetsov <kuznetsovam@altlinux.org>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This function return value is invariant since VIR_EXPAND_N check
removal in 7d2fd6e, so change its type and remove all dependent checks.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Reported-by: Pavel Nekrasov <p.nekrasov@fobos-nt.ru>
Signed-off-by: Alexander Kuznetsov <kuznetsovam@altlinux.org>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This function return value is invariant since VIR_EXPAND_N check
removal in 7d2fd6e, so change its type and remove all dependent checks.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Reported-by: Pavel Nekrasov <p.nekrasov@fobos-nt.ru>
Signed-off-by: Alexander Kuznetsov <kuznetsovam@altlinux.org>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This function return value is invariant since VIR_EXPAND_N check
removal in 7d2fd6e, so change its type and remove all dependent checks.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Reported-by: Pavel Nekrasov <p.nekrasov@fobos-nt.ru>
Signed-off-by: Alexander Kuznetsov <kuznetsovam@altlinux.org>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This function return value is invariant since VIR_EXPAND_N check
removal in 7d2fd6e, so change its type and remove all dependent checks.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Reported-by: Pavel Nekrasov <p.nekrasov@fobos-nt.ru>
Signed-off-by: Alexander Kuznetsov <kuznetsovam@altlinux.org>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
