Commit Graph

151 Commits

Author SHA1 Message Date
Daniel P. Berrangé
66ce769d27 qemu: don't continue loading caps if outdated
The XML format used for QEMU capabilities is not required to be
stable across releases, as we invalidate the cache whenever the
libvirt binary changes.

We none the less always try to parse te entire XML file before
we do any validity checks. Thus if we change the format of any
part of the data, or change permitted values for enums, then
libvirtd logs will be spammed with errors.

These are not in fact errors, but an expected scenario.

This change makes the loading code validate the cache timestamp
against the libvirtd timestamp immediately. If they don't match
then we stop loading the rest of the XML file.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-06-23 17:33:30 +01:00
Peter Krempa
576746d412 qemuxml2argvtest: Add QAPI/QMP schema validation for -blockdev and -netdev
Our hotplug test cases are weak in comparison to the qemuxml2argvtest.
Use all the the input data to also validate the arguments for -netdev
and -blockdev against the appropriate commands of the QMP schema.

Note that currently it's done just for the _CAPS versions of tests but
commenting out a line in the test file allows to validate even cases
which don't use real capabilities.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2020-05-20 09:41:58 +02:00
Michal Privoznik
bba05b01ce qemu: Track numa-mem-supported machine attribute
There is 'numa-mem-supported' machine attribute which specifies
whether '-numa mem=' is supported. Store it in our capabilities
as it will be used in later commits when building the command
line.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-05-18 10:23:05 +02:00
Andrea Bolognani
2e93af279a Revert "tests: Use qemu:///embed to simplify fakerootdir management"
Turns out that it's not enough to pass the qemu:///embed root to
virQEMUDriverConfigNew(), you also have to make sure the same
string is copied into the virQEMUDriver structure yourself, and
not doing so in our case resulted in the cleanup never happening
and in distcheck failing because of that.

On the other hand, actually setting config->embeddedRoot would
result in different paths being generated for each test run, which
would obviously break qemuxml2argvtest, so that's not an option
either.

This reverts commit d98cc1968e.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
2020-05-07 22:31:04 +02:00
Andrea Bolognani
d98cc1968e tests: Use qemu:///embed to simplify fakerootdir management
Now that the QEMU driver natively supports storing all its runtime
data inside an arbitrary directory, we can avoid having multiple
copies of the same logic in the test suite.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-05-07 19:20:56 +02:00
Tobin Feldman-Fitzthum
5ffff9b9e2 qemu: Introduce QEMU_CAPS_TCG
Since QEMU 2.10 it is possible to disable TCG when building
QEMU. Introduce a capability that reflects this.

Signed-off-by: Tobin Feldman-Fitzthum <tobin@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-04-28 11:10:54 +02:00
Michal Privoznik
f00f4ea7b1 tests: Fix virQEMUDriverConfigNew() calling with respect to @root
The virQEMUDriverConfigNew() accepts path to root directory for
embed mode as an argument. If the argument is not NULL it uses
the passed value as prefix for some internal paths (e.g.
cfg->libDir). If it is NULL though, it looks if the other
argument, @privileged is true or false and generates internal
paths accordingly. But when calling the function from the test
suite, instead of passing NULL for @root, an empty string is
passed. Fortunately, this doesn't create a problem because in
both problematic cases the generated paths are "fixed" to point
somewhere into build dir or the code which is tested doesn't
access them.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-04-07 15:26:10 +02:00
Ján Tomko
7e0d11be5b virsh: include virutil.h where used
Include virutil.h in all files that use it,
instead of relying on it being pulled in somehow.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2020-02-24 23:15:50 +01:00
Michal Privoznik
6d371d92f8 qemuTestParseCapabilitiesArch: Free @binary
The variable is allocated, but never freed.

==119642== 29 bytes in 1 blocks are definitely lost in loss record 409 of 671
==119642==    at 0x483579F: malloc (vg_replace_malloc.c:309)
==119642==    by 0x5AB075F: __vasprintf_internal (in /lib64/libc-2.29.so)
==119642==    by 0x57C1A28: g_vasprintf (in /usr/lib64/libglib-2.0.so.0.6000.7)
==119642==    by 0x579A0CC: g_strdup_vprintf (in /usr/lib64/libglib-2.0.so.0.6000.7)
==119642==    by 0x4AE6D58: vir_g_strdup_printf (glibcompat.c:197)
==119642==    by 0x136EEE: qemuTestParseCapabilitiesArch (testutilsqemu.c:291)
==119642==    by 0x138506: testQemuInfoSetArgs (testutilsqemu.c:763)
==119642==    by 0x135FFF: mymain (qemuxml2argvtest.c:3093)
==119642==    by 0x13A60E: virTestMain (testutils.c:839)
==119642==    by 0x1368C2: main (qemuxml2argvtest.c:3121)

Fixes: 42b3e5b9e4
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2020-02-21 11:13:20 +01:00
Daniel P. Berrangé
29c4a3c753 tests: avoid referencing stale readdir pointer
The contents of 'struct dirent' are only valid until the next call to
readdir() or closedir(). It is thus invalid to save a pointer to the
'd_name' field. Somehow this hasn't affected the test suite until
recently when FreeBSD 12 started showing use of uninitialized memory
resulting in test failures.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-02-07 14:57:59 +00:00
Daniel P. Berrangé
4ab2120f3b src: remove virFilePrintf in favour of g_fprintf
The virFilePrintf function was a wrapper for fprintf() to provide
Windows portability, since gnulib's fprintf() replacement was
license restricted. This is no longer needed now we have the
g_fprintf function available.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-02-04 14:00:45 +00:00
Peter Krempa
99eebcfe48 tests: qemu: Remove prehistoric machine types from faked data tests
qemu-5.0 will drop pre pc-1.0 machine types. Remove them from our
faked capabilities test suite. If a feature depends on a machine type it
shall be tested with real data and not with this hack.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-01-27 14:55:03 +01:00
Peter Krempa
ec0db69c86 tests: qemu: Don't add fake machine types when testing with real data
Skip the step of adding all of the fake machine types which are required
for the legacy tests in case when we are testing with real capabilities.

Faking any data in the real capabilities undermines the point of testing
with real capabilities.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-01-27 14:55:03 +01:00
Peter Krempa
cb5a89c115 tests: qemu: Add machine types used by the test code to fake capabilities
Enumerate all missing machine types for all missing architectures for
the fake capabilities used in many existing tests. This will allow
stricter validation whether qemu actually supports given machine type
since we already have some behaviour dependant on the actual machine
type.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-01-27 14:55:03 +01:00
Peter Krempa
d29ee7c124 tests: qemu: Unify fake machine types filled in for KVM and TCG caps of x86_64
For testing with synthetic capabilities we pre-fill the qemu
capabilities with some machine types. Historically there were two arrays
for KVM and TCG but that's not necessary. Make both instances of x86_64
data share the same array as the other architectures do.

This will later on simplify filling in all the other machine types which
are required for the test suite.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2020-01-27 14:55:03 +01:00
Daniel P. Berrangé
068efae5b1 qemu: add support for running QEMU driver in embedded mode
This enables support for running QEMU embedded to the calling
application process using a URI:

   qemu:///embed?root=/some/path

Note that it is important to keep the path reasonably short to
avoid risk of hitting the limit on UNIX socket path names
which is 108 characters.

When using the embedded mode with a root=/var/tmp/embed, the
driver will use the following paths:

                logDir: /var/tmp/embed/log/qemu
           swtpmLogDir: /var/tmp/embed/log/swtpm
         configBaseDir: /var/tmp/embed/etc/qemu
              stateDir: /var/tmp/embed/run/qemu
         swtpmStateDir: /var/tmp/embed/run/swtpm
              cacheDir: /var/tmp/embed/cache/qemu
                libDir: /var/tmp/embed/lib/qemu
       swtpmStorageDir: /var/tmp/embed/lib/swtpm
 defaultTLSx509certdir: /var/tmp/embed/etc/pki/qemu

These are identical whether the embedded driver is privileged
or unprivileged.

This compares with the system instance which uses

                logDir: /var/log/libvirt/qemu
           swtpmLogDir: /var/log/swtpm/libvirt/qemu
         configBaseDir: /etc/libvirt/qemu
              stateDir: /run/libvirt/qemu
         swtpmStateDir: /run/libvirt/qemu/swtpm
              cacheDir: /var/cache/libvirt/qemu
                libDir: /var/lib/libvirt/qemu
       swtpmStorageDir: /var/lib/libvirt/swtpm
 defaultTLSx509certdir: /etc/pki/qemu

At this time all features present in the QEMU driver are available when
running in embedded mode, availability matching whether the embedded
driver is privileged or unprivileged.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-27 11:04:03 +00:00
Daniel Henrique Barboza
67ded67321 tests: remove unneeded labels
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2020-01-07 16:40:41 +01:00
Daniel P. Berrangé
2c33532423 src: switch to use g_setenv/g_unsetenv
Eliminate direct use of normal setenv/unsetenv calls in
favour of GLib's wrapper. This eliminates two gnulib
modules

Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-01-03 15:42:12 +00:00
Daniel P. Berrangé
42b3e5b9e4 qemu: store the emulator name in the capabilities XML
We don't need this for any functional purpose, but when debugging hosts
it is useful to know what binary a given capabilities XML document is
associated with.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-23 16:39:38 +00:00
Daniel P. Berrangé
adf009b48f qemu: use host CPU object directly
Avoid grabbing the whole virCapsPtr object when we only need the
host CPU information.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-09 10:17:27 +00:00
Daniel P. Berrangé
1a1d848694 qemu: use NUMA capabilities object directly
Avoid grabbing the whole virCapsPtr object when we only need the
NUMA information.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-09 10:17:27 +00:00
Daniel P. Berrangé
6cc992bd1a conf: move NUMA capabilities into self contained object
The NUMA cells are stored directly in the virCapsHostPtr
struct. This moves them into their own struct allowing
them to be stored independantly of the rest of the host
capabilities. The change is used as an excuse to switch
the representation to use a GPtrArray too.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-09 10:17:27 +00:00
Daniel P. Berrangé
74fb858f7d conf: drop virCapsPtr param from basic post parse callback
The QEMU impl of the callback can directly use the QEMU capabilities
cache to resolve the emulator binary name, allowing virCapsPtr to be
dropped.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-09 10:17:19 +00:00
Daniel P. Berrangé
638ffa2228 conf: pass default sec model in parser config
Instead of using the virCapsPtr to get the default security model,
pass this in via the parser config.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-09 10:15:16 +00:00
Daniel P. Berrangé
5cedfbd100 qemu: add machines & arch to fake test capabilities cache
Currently the virQEMUCapsPtr objects are just empty. Future patches are
going to expect them to contain real data. Start off by populating the
machine types and arch information.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-09 10:15:15 +00:00
Daniel P. Berrangé
bce3b0807e qemu: cache host arch separately from virCapsPtr
As part of a goal to eliminate the need to use virCapsPtr for anything
other than the virConnectGetCapabilies() API impl, cache the host arch
against the QEMU driver struct and use that field directly.

In the tests we move virArchFromHost() globally in testutils.c so that
every test runs with a fixed default architecture reported.

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-09 10:15:15 +00:00
Daniel P. Berrangé
0279a51b83 tests: fix name of 32-bit x86 QEMU binary
The 32-bit x86 binary is called qemu-system-i386, not
qemu-system-i686. This mistake across many test XML files was
not noticed because the mistake was also made in testutilsqemu.c
when mocking the capabilities.

Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-12-03 13:57:44 +00:00
Jiri Denemark
30c6d99209 qemuxml2argvtest: Update host arch for DO_TEST*ARCH* tests
To avoid mismatch between host and QEMU capabilities.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-20 17:22:07 +01:00
Ján Tomko
ef88698668 Use g_mkdtemp instead of mkdtemp
Prefer the GLib version to the one from gnulib.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2019-11-14 19:02:31 +01:00
Peter Krempa
9a2ca9c947 conf: capabilities: Refactor API for setting guest capability features
Remove the need to pass around strings and switch to the enum values
instead.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-13 08:19:37 +01:00
Michal Privoznik
4fa804c0c7 tests: Use g_strdup_printf() instead of virAsprintf()
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-11-12 16:15:59 +01:00
Peter Krempa
63d604088c tests: make domaincapstest less anoying to debug
Since 6a077cf2b3 domaincapstest does not run through all cases on
failure but terminates right away. This makes it super annoying to debug
or use in combination with VIR_TEST_REGENERATE_OUTPUT.

Fix it by remembering failure and still running through all cases.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-11-11 16:46:40 +01:00
Andrea Bolognani
c4d6465aa7 tests: testQemuCapsIterate: Pass prefix and version to callback
Right now we're passing a "base" string that contains both,
separated by an underscore. Some changes that we're going to
introduce later will require us to have the version number on its
own, and instead of delegating the task of splitting the two apart
to the callback it make more sense to perform it upfront.

This change results in quite a bit of churn because we're now
using the version number only, without the prefix, to calculate
the dummy microcodeVersion.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
2019-10-24 17:21:14 +02:00
Andrea Bolognani
5a45ed9c96 tests: testQemuCapsIterate: Pass suffix to callback
Right now users need to hardcode the suffix, which is not a big
deal since they're the ones who passed it to testQemuCapsIterate()
in the first place; however, since we're already passing most of
the information to the callback and we're going to add more later
on, it makes sense to be consistent and pass the suffix too.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
2019-10-24 17:21:12 +02:00
Andrea Bolognani
51495a4d73 tests: testQemuCapsIterate: Pass inputDir to callback
Right now users need to know input file live inside
TEST_QEMU_CAPS_PATH, which is bad layering.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
2019-10-24 17:21:10 +02:00
Andrea Bolognani
29795544fd tests: testQemuCapsIterate: Validate suffix
We're going to depend on the fact that the suffix starts with a
dot later on, so we better ensure that it does.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
2019-10-24 17:21:08 +02:00
Andrea Bolognani
85394f676d tests: testQemuCapsIterate: Don't ignore malformed file names
If files whose name doesn't follow the expected format are added
to the repository, it's better to make the test suite fail than to
silently ignore them.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
2019-10-24 17:21:05 +02:00
Ján Tomko
29b1e859e3 tests: use g_strdup instead of VIR_STRDUP
Replace all occurrences of
  if (VIR_STRDUP(a, b) < 0)
     /* effectively dead code */
with:
  a = g_strdup(b);

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-21 12:51:59 +02:00
Ján Tomko
b6108a04ea Use g_steal_pointer instead of VIR_STEAL_PTR everywhere
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-16 15:59:42 +02:00
Ján Tomko
1e2ae2e311 Use g_autofree instead of VIR_AUTOFREE
Since commit 44e7f02915
    util: rewrite auto cleanup macros to use glib's equivalent

VIR_AUTOFREE is just an alias for g_autofree. Use the GLib macros
directly instead of our custom aliases.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-16 12:06:43 +02:00
Ján Tomko
67e72053c1 Use G_N_ELEMENTS instead of ARRAY_CARDINALITY
Prefer the GLib version of the macro.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-15 16:14:19 +02:00
Michal Privoznik
e3511ee5ec tests: Always put '\n' at the end of VIR_TEST_VERBOSE
Similarly to the previous commit, VIR_TEST_VERBOSE should put
'\n' at the end of each call so that the output is not broken.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-08-27 15:56:17 +02:00
Michal Privoznik
d07ce21610 tests: Always put a '\n' after each debug print
There is an inconsistency with VIR_TEST_DEBUG() calls. One half
(roughly) of calls does have the newline character the other one
doesn't. Well, it doesn't have it because it assumed blindly that
new line will be printed, which is not the case.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-08-27 15:49:48 +02:00
Erik Skultety
08ad83eee1 tests: Fix parentheses order in an assignment-comparison conditional
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1717090

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2019-06-04 20:56:58 +02:00
Andrea Bolognani
45dff4bbfa tests: Drop dirname argument from testQemuCapsIterate()
As evidenced by all existing callers, the only directory it makes
sense to use is TEST_QEMU_CAPS_PATH, so let's just bake that into
the function.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-04-17 08:30:57 +02:00
Andrea Bolognani
3fe020a038 tests: Drop dirname argument from testQemuGetLatestCapsForArch()
As evidenced by all existing callers, the only directory it makes
sense to use is TEST_QEMU_CAPS_PATH, so let's just bake that into
the function.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-04-17 08:30:55 +02:00
Andrea Bolognani
f0e48979c9 tests: Make TEST_QEMU_CAPS_PATH public
The value (with a slightly different name) is currently private
to testutilsqemu, but since we use this path all over the place
it makes sense to define it publicly and avoid repetition.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-04-17 08:30:49 +02:00
Jiri Denemark
673c62a3b7 qemu: Don't cache microcode version
My earlier commit be46f61326 was incomplete. It removed caching of
microcode version in the CPU driver, which means the capabilities XML
will see the correct microcode version. But it is also cached in the
QEMU capabilities cache where it is used to detect whether we need to
reprobe QEMU. By missing the second place, the original commit
be46f61326 made the situation even worse since libvirt would report
correct microcode version while still using the old host CPU model
(visible in domain capabilities XML).

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-15 14:34:49 +02:00
Cole Robinson
89effa6159 tests: add testQemuGetLatestCaps
Move the capslatest building from qemuxml2argv to testutilsqemu

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-10 19:12:42 -04:00
Cole Robinson
2b9d64096f tests: Move testQemuInfo* to testutilsqemu
So it can eventually be shared with qemuxml2xml

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-10 19:05:08 -04:00