Rename qemuBuildAudioCommandLineArgs to qemuBuildAudioCommandLine and
fix the arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the old now unused code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Generate only new version of the '-audiodev' commandline. The leftover
old code and validation will be removed in subsequent patches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Per [1] the Debian 10 reaches EOL in August of 2022. This allows us to
bump the minimum supported qemu version to qemu-4.2 which will also
allow us to do significant cleanups.
This commit bumps the minimum qemu verison and updates the corresponding
docs.
[1]: https://wiki.debian.org/DebianReleases
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only caller doesn't check the return value and actually doesn't have
one either. Remove the return value and adjust return statements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we started handling the monitor EOF event inside a job any code
which uses virDomainObjWait would no longer properly abort in case when
the VM crashed during the wait.
This is because virDomainObjWait uses virDomainObjIsActive which checks
'vm->def->id' to see if the VM is still active. Unfortunately the domain
id is cleared in qemuProcessStop which is run only inside the job.
To fix this we can use the 'beingDestroyed' flag stored in the VM
private data which is set to true around the time when the condition is
signalled.
Reported-by: Pavel Hrdina <phrdina@redhat.com>
Fixes: 8c9ff9960b
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemu code will need to check other qemu-private conditions when
reporting success for waiting. Thus we must replace all use of it with a
qemu-specific helper. For now the helper forwards directly to
virDomainObjWait.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to do this so that we can mock it in the test suite.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Tested-by: Christophe de Dinechin <dinechin@redhat.com>
We need this callback structure for qemu driver only, but it
makes more sense to include it in the virDomainJobObj in case of
other future additions than as a parameter of a beginJob
functions.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch adds a new variable maxQueuedJobs into the job object
as it is the last hypervisor-based part of the begin job. Since
this patch, it will not be necessary to propagate driver
structure into the job functions.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
It makes sense to move this to other hypervisor-based functions
into the private job callback structure to make begin job
general.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The query-cpus-fast command was introduced in 2.12, therefore
query-cpus is never used on supported versions of QEMU. Remove
the logic to parse its output, as well as the parameters to
choose between the two commands.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This patch moves qemuDomainTrackJob() as virDomainTrackJob() into
hypervisor because it is called in begin job and end job
functions that will be generalized in the following series.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch moves qemuDomainObjClearJob() as
virDomainObjClearJob() into hypervisor in order to be used by
other hypervisors as well.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch moves qemuDomainObjPreserveJob() as
virDomainObjPreserveJob() into hypervisor in order to be used by
other hypervisors as well.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It does not make sense to propagate virDomainObj and get
qemuDomainObjPrivate from it, when it is already accessible in
the only function qemuDomainObjPreserveJob() is called from. That
being said, we can also propagate virDomainJobObj directly and
avoid using qemu private structure.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch moves qemuDomainObjResetAsyncJob() as
virDomainObjResetAsyncJob() into hypervisor.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch moves qemuDomainObjResetAgentJob() as
virDomainObjResetAgentJob() into hypervisor.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After QEMU is killed in qemuProcessStop() its mount namespace
doesn't exist anymore, because it was the only process running
there. Thus we should clear our internal flag that the domain has
namespace enabled so that seclabel restore code does not try to
enter it. We do the same in qemuProcessHandleMonitorEOF() but
when it is us, who decides to kill QEMU rather than QEMU quitting
we haven't seen EOF by the time qemuProcessStop() is called.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This patch maps /domain/cpu/maxphysaddr into -cpu parameters:
- <maxphysaddr mode='passthrough'/> becomes host-phys-bits=on
- <maxphysaddr mode='emualte' bits='42'/> becomes phys-bits=42
Passthrough mode can only be used if the chosen CPU model is
'host-passthrough'. Also validate that an explicitly specified
bits value does not exceed the physical address bits on the host.
The feature is available since QEMU 2.7.0.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch introduces the
<maxphysaddr mode='passthrough'/>
<maxphysaddr mode='emulate' bits='42'/>
sub element of /domain/cpu, which allows specifying the guest virtual CPU
address size. This can be useful if the guest needs to have a large amount
of memory.
If mode='passthrough', the virtual CPU will have the same number of address
bits as the host. If mode='emulate', the mandatory bits attribute specifies
the number of address bits.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Supported TPM versions are reported in domain capabilities. These
are used already to validate TPM type and model, but not TPM
version. This is suboptimal, because otherwise we leave users to
meet the error when starting a guest and libvirt spawns swtpm
binary which in turn reports an error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
When we call qemuDomainSetMaxMemLock to reset memory locking limit back
to its original value the domain can already be stopped (for example
after the domain shuts down during migration) in which case it does not
make sense to set any limit. Doing so can even be harmful as we may end
up setting the limit for the daemon itself as the PID is 0.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When resetting private data after stopping QEMU process we should also
reset the original memory locking limit (both normal and pre-migration)
as they are not relevant anymore.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The qemuDomainDefCPUPostParse() does a bit more than filling in
missing info. It also validates CPU cache configuration. Move
that code into qemuValidateDomainDefCpu() where the code fits
better.
And since I need to fix indentation of existing code in
qemuValidateDomainDefCpu(), I'm taking this opportunity and move
error messages onto single line. Interestingly, this uncovers a
bug we have in sc_prohibit_diagnostic_without_format syntax-check
rule, because previously a virReportError() with a message
spawned over three lines was not caught but not it is. But
trying to understand that regex is a job for another time.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Directly check the return value of 'connect'. Unfortunately we can't
remove it as we have to undo auto-closing of the socket on success.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
All callers now pass false for 'retry' we are guaranteed to have a
monitor socket present. This means that the retry code can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
In 'qemuProcessQMPLaunch' qemu is very specifically launched using it's
internal '-daemonize' flag (see comment in the function) to ensure that
the monitor socket is ready and opened prior to attempting the monitor
connection.
This means we don't have to retry the connection to the monitor in
qemuMonitorOpen as the socket will be already there.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The 'timeout' argument is used by 'qemuMonitorOpenUnix' only when the
'retry' argument is true. The callers of 'qemuMonitorOpen' only pass '0'
for timeout when they call it with 'retry' true and use other values
when 'retry' is false and thus ignored.
This means we can remove the argument and simply have it set to the
default value of QEMU_DEFAULT_MONITOR_WAIT.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Both callers pass 'false' as the argument via a variable which is not
modified. Remove the argument and pass 'false' directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Since functions virQEMUCapsFillDomainFeatureSEVCaps() and
virQEMUCapsSEVInfoCopy() essentially do the same thing it does
not make sense to have the code duplicated. This patch replaces
the relevant code in the first function with the function call to
the second one.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
This patch moves qemuDomainObjResetJob() as
virDomainObjResetJob() into hypervisor in order to be used by
other hypervisors as well.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
After previous cleanup, the qemuDomainDefTPMsPostParse() function
does nothing more than validates TPM devices. Therefore, it
should live in qemu_validate.c instead of qemu_domain.c. Move it
there and rename to reflect the fact that the function is doing
validation instead of PostParsing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In the qemuDomainDefPostParse() we aim to fill in top level
values, which require overall view of domain, or those parts of
configuration that are not a device in domain XML (e.g. vCPUs).
However, inside of qemuDomainDefTPMsPostParse(), which is called
from aforementioned function, we do two tings:
1) fill in missing info (TPM version), and
2) validate TPM definition.
Now, if 1) is moved into qemuDomainTPMDefPostParse() (the device
post parse callback), then 2) can be moved into validation step.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When parsing a TPM device plenty of virXMLPropString() +
enum2int() combos are used. These can be replaced with
virXMLPropEnum().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The _virDomainTPMDef structure has 'version' member, which is a
bit misplaced. It's only emulator type of TPM that can have a
version, even our documentation says so:
``version``
The ``version`` attribute indicates the version of the TPM. This attribute
only works with the ``emulator`` backend. The following versions are
supported:
Therefore, move the member into that part of union that's
covering emulated TPM devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There's no need to skip over ENOENT error in
qemuCgroupAllowDevicesPaths(). The path must exists when
qemuCgroupAllowDevicePath() is called because of virFileExists()
check done right above.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The qemuBuildMachineCommandLine() function is needlessly long.
Separate out parts that generate memory related arguments into
qemuAppendDomainMemoryMachineParams(). Unfortunately, expected
outputs for some qemuxml2argvdata cases needed to be updated
because the order in which arguments are generated is changed.
But there's no functional change.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The qemuBuildMachineCommandLine() function is needlessly long.
Separate out parts that generate arguments based on
domainDef->features[] into
qemuAppendDomainFeaturesMachineParam(). Unfortunately, expected
outputs for some qemuxml2argvdata cases needed to be updated
because the order in which features are generated is changed. But
there's no functional change.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Almost all of memory models we currently support allow setting
virDomainMemoryDef::targetNode so that the memory module is
associated with given guest NUMA node. And we do have a check
whether the requested node is within bounds, but it's executed
only when building QEMU's cmd line. Move it into validation
phase.
While this commit is moving the validation to a place that does
not validate all the possible code paths, it's okay, because only
the explicit memory device has user-configurable target node
which could break the assumption.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently, virJSONValueObjectHasKey() can return one of three
values:
-1 if passed object type is not VIR_JSON_TYPE_OBJECT,
0 if the key is not present, and finally
1 if the key is present.
But, neither of callers is interested in the -1 case. In fact,
some callers call this function treating -1 and 1 cases the same.
Therefore, make the function return just true/false and fix few
callers that explicitly checked for == 1 case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
