The callback will properly cleanup non-p2p migration job in case the
migrating domain dies between Begin and Perform while the client which
controls the migration is not cooperating (normally the API for the next
migration phase would handle this).
The same situation can happen even after Prepare and Perform phases, but
they both already register a suitable callback, so no fix is needed
there.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Normally the structure is created once the source reports completed
migration, but with post-copy migration we can get here even after
libvirt daemon was restarted. It doesn't make sense to preserve the
structure in our status XML as we're going to rewrite almost all of it
while refreshing the stats anyway. So we just create the structure here
if it doesn't exist to make sure we can properly report statistics of a
completed migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Everything was already done in the normal Finish phase and vCPUs are
running. We just need to wait for all remaining data to be transferred.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The QEMU process is already running, all we need to do is to call
migrate-recover QMP command. Except for some checks and cookie handling,
of course.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Non-postcopy case talks to QEMU monitor and thus needs to create a
nested job. Since qemuMigrationAnyConnectionClosed is called in case
there's no thread processing a migration API, we need to make the
current thread a temporary owner of the migration job to avoid "This
thread doesn't seem to be the async job owner: 0". This is done by
starting a migration phase.
While no monitor interaction happens in postcopy case and just setting
the phase (to indicate a broken postcopy migration) would be enough,
being consistent and setting the owner does not hurt anything.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
To prepare the code for handling incoming migration too.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function is now called qemuMigrationAnyConnectionClosed to make it
clear it is supposed to handle broken connection during migration. It
will soon be used on both sides of migration so the "Src" part was changed
to "Any" to avoid renaming the function twice in a row.
The original *Cleanup name could easily be confused with cleanup
callbacks called when a domain is destroyed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This command tells QEMU to start listening for an incoming post-copy
recovery connection. Just like migrate-incoming is used for starting
fresh migration on the destination host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Offline migration jumps over a big part of qemuMigrationDstPrepareFresh.
Let's move that part into a new qemuMigrationDstPrepareActive function
to make the code easier to follow.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Moves most of the code from qemuMigrationDstPrepareAny to a new
qemuMigrationDstPrepareFresh so that qemuMigrationDstPrepareAny can be
shared with post-copy resume.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
It just calls migrate QMP command with resume=true without having to
worry about migration capabilities or parameters, storage migration,
etc. since everything has already been done in the normal Perform phase.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
qemuMigrationSrcRun does a lot of thing before and after telling QEMU to
start the migration. Let's make the core reusable by moving it to a new
qemuMigrationSrcStart function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
To make the code flow a bit more sensible.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Mostly we just need to check whether the domain is in a failed post-copy
migration that can be resumed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This phase marks a migration protocol as broken in a post-copy phase.
Libvirt is no longer actively watching the migration in this phase as
the migration API that started the migration failed.
This may either happen when post-copy migration really fails (QEMU
enters postcopy-paused migration state) or when the migration still
progresses between both QEMU processes, but libvirt lost control of it
because the connection between libvirt daemons (in p2p migration) or a
daemon and client (non-p2p migration) was closed. For example, when one
of the daemons was restarted.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Both qemuMigrationJobSetPhase and qemuMigrationJobStartPhase were doing
the same thing, which made little sense. Let's follow the difference
between qemuDomainObjSetJobPhase and qemuDomainObjStartJobPhase and
change job owner only in qemuMigrationJobStartPhase.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We will want to update migration phase without affecting job ownership.
Either in the thread that already owns the job or from an event handler
which only changes the phase (of a job no-one owns) without assuming it.
Let's move the ownership change to a new qemuDomainObjStartJobPhase
helper and let qemuDomainObjSetJobPhase set the phase without touching
ownership.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The check can reveal a serious bug in our migration code and we should
not silently ignore it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Into a new qemuMigrationCheckPhase helper, which can be reused in other
places.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When recovering from a failed post-copy migration, we need to go through
all migration phases again, but don't need to repeat all the steps in
each phase. Let's create a new set of migration phases dedicated to
post-copy recovery so that we can easily distinguish between normal and
recovery code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Turn the final part of Begin phase formatting a domain XML for migration
into a reusable helper.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When libvirt daemon is restarted during an active post-copy migration,
we do not always mark the migration as broken. In this phase libvirt is
not really needed for migration to finish successfully. In fact the
migration could have even finished while libvirt was not running or it
may still be happily running.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We want to use query-migrate QMP command to check the current migration
state when reconnecting to active domains, but the reply we get to this
command may not contain any statistics at all if called on the
destination host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
So far migration could only be completed while a migration API was
running and waiting for the migration to finish. In case such API could
not be called (the connection that initiated the migration is broken)
the migration would just be aborted or left in a "don't know what to do"
state. But this will change soon and we will be able to successfully
complete such migration once we get the corresponding event from QEMU.
This is specific to post-copy migration when vCPUs are already running
on the destination and we're only waiting for all memory pages to be
transferred. Such post-copy migration (which no-one is actively
watching) is called unattended migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When reconnecting to an active domain we need to use a different job
structure than the one referenced from the VM object.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Normally migrationPort is released in the Finish phase, but we need to
make sure it is properly released also in case qemuMigrationDstFinish is
not called at all. Currently the only callback which is called in this
situation qemuMigrationDstPrepareCleanup which already releases
migrationPort. This patch adds similar handling to additional callbacks
which will be used in the future.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
By separating it into a dedicated qemuMigrationSrcComplete function
which can be later called in other places.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function which started a migration phase should also finish it by
calling qemuMigrationJobFinish/qemuMigrationJobContinue so that the code
is easier to follow.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Refactors qemuMigrationDstFinish by moving some parts to a dedicated
function for easier introduction of postcopy resume code without
duplicating common parts of the Finish phase. The goal is to have the
following call graph:
- qemuMigrationDstFinish
- qemuMigrationDstFinishOffline
- qemuMigrationDstFinishActive
- qemuMigrationDstFinishFresh
- qemuMigrationDstFinishResume
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
To keep all cookie handling (parsing and formatting) in the same
function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Refactors qemuMigrationDstFinish by moving some parts to a dedicated
function for easier introduction of postcopy resume code without
duplicating common parts of the Finish phase. The goal is to have the
following call graph:
- qemuMigrationDstFinish
- qemuMigrationDstFinishOffline
- qemuMigrationDstFinishActive
- qemuMigrationDstFinishFresh
- qemuMigrationDstFinishResume
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Refactors qemuMigrationDstFinish by moving some parts to a dedicated
function for easier introduction of postcopy resume code without
duplicating common parts of the Finish phase. The goal is to have the
following call graph:
- qemuMigrationDstFinish
- qemuMigrationDstFinishOffline
- qemuMigrationDstFinishActive
- qemuMigrationDstFinishFresh
- qemuMigrationDstFinishResume
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We want to prevent our error path that can potentially kill the domain
on the destination host from overwriting an error reported earlier, but
we were only doing so in one specific path when starting vCPUs fails.
Let's do it in all paths.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The comment about QEMU < 0.10.6 has been irrelevant for years.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
By separating it into a dedicated qemuMigrationDstComplete function
which can be later called in other places.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The final part of Finish phase will be refactored into a dedicated
function and we don't want to generate the cookie there.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Let's call it "error" so that it's clear the label is only used in
failure path.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Most of the code in "endjob" label is executed only on failure. Let's
duplicate the rest so that the label can be used only in error path
making the success path easier to follow and refactor.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Code executed only when dom != NULL can be moved before "endjob" label,
to the only place where dom is set.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We don't need the object until we get to the "endjob" label.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When connection breaks during post-copy migration, QEMU enters
'postcopy-paused' state. We need to handle this state and make the
situation visible to upper layers.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Even though a migration is paused, we still want to see the amount of
data transferred so far and that the migration is indeed not progressing
any further.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Migration is a job which takes some time and if it succeeds, there's
nothing to call another migration on. If a migration fails, it might
make sense to rerun it with different arguments, but this would only be
done once the first migration fails rather than while it is still
running.
If this was not enough, the migration job now stays active even if
post-copy migration fails and anyone possibly retrying the migration
would be waiting for the job timeout just to get a suboptimal error
message.
So let's special case getting a migration job when another one is
already active.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Jobs that are supposed to remain active even when libvirt daemon
restarts were reported as started at the time the daemon was restarted.
This is not very helpful, we should restore the original timestamp.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since we keep the migration job active when post-copy migration fails,
we need to restore it when reconnecting to running domains.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When migration fails after it already switched to post-copy phase on the
source, but early enough that we haven't called Finish on the
destination yet, we know the vCPUs were not started on the destination
and the source host still has a complete state of the domain. Thus we
can just ignore the fact post-copy phase started and normally abort the
migration and resume vCPUs on the source.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When post-copy migration fails, we can't just abort the migration and
resume the domain on the source host as it is already running on the
destination host and no host has a complete state of the domain memory.
Instead of the current approach of just marking the domain on both ends
as paused/running with a post-copy failed sub state, we will keep the
migration job active (even though the migration API will return failure)
so that the state is more visible and we can better control what APIs
can be called on the domains and even allow for resuming the migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The code for setting up a previously active backup job in
qemuProcessRecoverJob is generalized into a dedicated function so that
it can be later reused in other places.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
It is used for saving job out of domain object. Just like
virErrorPreserveLast is used for errors. Let's make the naming
consistent as Restore would suggest different semantics.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function can be used as a callback for qemuDomainCleanupAdd to
automatically clean up a migration job when a domain is destroyed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The function never returns anything but zero.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The events would normally be triggered only if we're changing domain
state. But most of the time the domain is already in the right state and
we're just changing its substate from {PAUSED,RUNNING}_POSTCOPY to
*_POSTCOPY_FAILED. Let's emit lifecycle events explicitly when post-copy
migration fails to make the failure visible without polling.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
There's no need to artificially pause a domain when post-copy fails
from our point of view unless QEMU connection is broken too as migration
may still be progressing well.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This new "post-copy failed" reason for the running state will be used on
the destination host when post-copy migration fails while the domain is
already running there.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
'STREQ' is used to compare the override alias with the device alias.
While the parser ensures that the override alias is non-NULL, the device
alias may be NULL and STREQ doesn't handle that.
Fixes: 38ab5c9ead
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/321
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to use the 'name' variable and just overwrite it with the FD
number when FDs are passed on the monitor. Otherwise we will read NULL
path if the FD is accessed before being passed on the monitor. The idea
of this helper is to simplify the monitor code so it would be
counterproductive to have other behaviour.
Fixes the following symptom:
$ virsh attach-interface cd network default --model virtio
error: Failed to attach interface
error: internal error: unable to execute QEMU command 'netdev_add': File descriptor named '(null)' has not been found
Fixes: bca9047906
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/318
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2092856
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Obtaining a screenshot via virDomainScreenshot() works like this:
1) we create a temp file, label it, then
2) tell QEMU to store the screenshot into it, and
3) finally, open the file for transfer via virStream
Since the file is just temporary and even explicitly unlinked at
the end, no seclabel restoration is done. This makes perfect
sense for security models which attach a label to file itself
(DAC, SELinux) because the label is gone with the file. However,
for models where a list of files and allowed actions is kept on a
side (AppArmor) this approach means we just append files into the
profile and never remove them. In turn, the file grows and policy
update takes longer with each entry.
Restore the seclabel for AppArmor's sake.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The virStorageSourceGetActualType() function returns either
virStorageSource->type (which is of type virStorageType), or
virStorageSourcePoolDef->type, which really stores a value of the
same enum. Thus, the latter struct can be changed so that the
virStorageSourceGetActualType() function can return correct type
instead of generic int.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
There are three places (two in domain_conf.c and one in
qemu_migration.c) where a virStorageSource->type is typecasted to
virStorageType (for the purpose of catching missing enum member
in a switch() statement at compile time). This is needless,
because as of v8.2.0-rc1~120 the struct member is of proper type.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
There are two functions declared in qemu_capspriv.h:
1) virQEMUCapsInitHostCPUModel() which is not used anywhere but
qemu_capabilities.c,
2) virQEMUCapsSetSEVCapabilities() which is my personal favorite
but despite that it's never implemented nor called.
Drop them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
The virDomainObj struct has @pid member where the domain's
hypervisor PID is stored (e.g. QEMU/bhyve/libvirt_lxc/... PID).
However, we are not consistent when it comes to shutoff state.
Initially, because virDomainObjNew() uses g_new0() the @pid is
initialized to 0. But when domain is shut off, some functions set
it to -1 (virBhyveProcessStop, virCHProcessStop, qemuProcessStop,
..).
In other places, the @pid is tested to be 0, on some other places
it's tested for being negative and in the rest for being
positive.
To solve this inconsistency we can stick with either value, -1 or
0. I've chosen the latter as it's safer IMO. For instance if by
mistake we'd kill(vm->pid, SIGTERM) we would kill ourselves
instead of init's process group.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
When cleaning up after stopped domain, one of the things we do is
attempt to clear QoS settings on OVS type interfaces. Well, this
is needless because they were removed just a couple of lines
above. As a result, the attempt fails and a warning is printed
into logs, polluting them needlessly.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/313
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Detected by gcc 11 -Wformat-overflow:
../../src/qemu/qemu_driver.c: In function ‘qemuDomainBlockJobAbort’:
../../src/util/virerror.h:176:5: warning: ‘%s’ directive argument is null [-Wformat-overflow=]
176 | virReportErrorHelper(VIR_FROM_THIS, code, __FILE__, \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
177 | __FUNCTION__, __LINE__, __VA_ARGS__)
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../src/qemu/qemu_driver.c:14475:17: note: in expansion of macro ‘virReportError’
14475 | virReportError(VIR_ERR_OPERATION_FAILED,
| ^~~~~~~~~~~~~~
../../src/qemu/qemu_driver.c:14476:73: note: format string is defined here
14476 | _("block job '%s' failed while pivoting: %s"),
| ^~
Signed-off-by: Scott Davis <scott.davis@starlab.io>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It always points to QEMU driver, which is quite redundant as all
callbacks also get a pointer to a vm object. Let's get the driver
pointer from there instead.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All callers (QMP event handlers) always pass non-NULL vm pointer. Let's
make the parameter mandatory.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allocating and filling qemuProcessEvent structure is a repeated pattern
before all calls to qemuProcessEventSubmit. We can move the allocation
inside this function and let callers pass all arguments directly.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In qemu_extdevice.c lives code that handles helper daemons that
are required for some types of devices (e.g. virtiofsd,
vhost-user-gpu, swtpm, etc.). These devices have their own
handling code in separate files, with only a very basic functions
exposed (e.g. for starting/stopping helper process, placing it
into given CGroup, etc.). And these functions all work over a
single instance of device (virDomainVideoDef *, virDomainFSDef *,
etc.), except for TPM handling code which takes virDomainDef *
and iterates over it inside its module.
Remove this oddness and make qemuExtTPM*() functions look closer
to the rest of the code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We have virDomainUpdateDeviceFlags() API that allows changing of
some attributes of a device whilst domain is still running (e.g.
setting different QoS, link state change on vNICs). But only very
limited set of attributes can be changed and we have to check
whether user isn't trying to sneak in a change that's not
allowed. Well, in case of a virtio vNIC we forgot to check for
@rss and @rss_hash_report attributes of <driver/>.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2082540
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Fix identation of virQEMUCapsUpdateHostCPUModel() params.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
My recent commit v8.3.0-201-gc500955e95 tried to fix a regression which
would cause the function to return success even if virCloseCallbacksSet
failed. But due to a strange code flow in the function introduced an
opposite regression. The function would return NULL on success when
called without VIR_MIGRATE_CHANGE_PROTECTION flag.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor ccw data structure virDomainDeviceCCWAddress into util virccw.h
and rename it as virCCWDeviceAddress.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit v8.3.0-152-g49ef0f95c6 removed explicit VIR_FREE from
qemuMigrationBegin, effectively reverting v1.2.14-57-g77ddd0bba2
The xml variable was used to hold the return value and thus had to be
unset when an error happened after xml was already non-NULL. Such code
may be quite confusing though and we usually avoid it by not storing
anything to a return variable until everything succeeded.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Like a Spice port, a dbus serial must specify an associated channel name.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
By default, libvirt will start a private bus and tell QEMU to connect to
it. Instead, a D-Bus "address" to connect to can be specified, or the
p2p mode enabled.
D-Bus display works best with GL & a rendernode, which can be specified
with <gl> child element.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Start the daemon if necessary (it is already stopped in qemuProcessStop)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove the argument from the function prototypes and the callback
handler.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Access the 'driver' struct from the private data rather than the passed
opaque pointer in preparation to remove the opaque pointer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Access the 'driver' struct from the private data rather than the passed
opaque pointer in preparation to remove the opaque pointer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When dealing with fdsets only we don't need to pass the FD first as we
now generate fdset name directly. Also there are no more caveats in
passing multiple FDs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the 'direct' mode was separated and thus we don't have any
possible error case we can stop returning any values and simplify
callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This finishes the separation of the fdset and direct helpers. Remove
'qemuFDPassNewDirect' and all internals which were applicable only in
direct mode.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The callers adding the FDs are validating them regardless so this check
was redundant.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unix socket chardevs with FD passing need to use the direct mode so we
need to convert it to use qemuFDPassDirect.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Originally I envisioned a common set of APIs for both FD passing
approaches but it turns out they are not really compatible enough for it
to make sense to use one set of APIs.
As of such introduce a distinct set of APIs for the 'direct' mode, which
will later be used to convert all places that currently use
'qemuFDPassNewDirect' and later clean up the existing APIs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the internal documentation about qemu threading to the knowledge
base.
The conversion included rstizing of the text document, mainly just
fixing of the headline and enclosing function names and code examples
into code block sections.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The commandline generated from our XML->native convertor is the majority
of cases not usable without libvirt anyways and the situation will not
improve any more.
As of such there's no much utility of avoiding the use of stopped CPUs
flag in such case.
Remove the QEMU_BUILD_COMMAND_LINE_CPUS_RUNNING flag and the associated
logic.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now that we store the state of the host FIPS mode setting in the qemu
driver object, we don't need to outsource the logic into
'qemuCheckFips'.
Additionally since we no longer support very old qemu's which would not
yet have --enable-fips we can drop the part of the comment about very
old qemus.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Automatically free the 'vm' temporary domain object and remove the
'cleanup' label and 'ret' helper variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Improve the debug log inside 'qemuBuildCommandLine' to include the name
from the definition and remove useless data such as the pointer to the
qemuDriver object or qemuCaps.
Additionally remove the non-specific debug statements:
VIR_DEBUG("Building emulator command line");
from the two callers of qemuBuildCommandLine.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Rather than re-query all the time we can cache the state of FIPS of the
host as it will not change during the runtime of the guest.
Introduce a 'hostFips' flag to 'virQEMUDriver' and move the code
checking the state from 'qemuCheckFips' to 'qemuStateInitialize' and
also populate 'hostFips' in qemuxml2argvtest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Introduce 'qemuBuildCommandLineFlags' and use it instead of specific
flag booleans.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We already format a commandline using FD passing for the tap devices so
formatting the 'vhost' file descriptors won't make it any less usable
directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add support for the mode and add the corresponding qemuxml2argv test
case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
None of the callers now uses the slirp fd passing feature, so it can be
removed.
At this point even the VIR_DEBUG doesn't make sense as it would only log
the pointer of 'props'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We don't need 'slirpfdName' and 'slirpfd'. The 'slirp' local can be
removed too as qemuSlirpStart is safe to be called if there's nothing to
do.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Populate the 'slirpfd' qemuFDPass structure inside the private data for
passing the fd to qemu rather than using out-of-band variables.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
No need to ask the callers to call this extra function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'driver' can be taken from the private data of 'vm' and 'slirp' can
be taken from private data of 'net', both of which we need anyways.
Additionally by checking whether slirp needs to be started inside the
function we don't need to do this logic in the callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both callers populate the variable when qemuInterfacePrepareSlirp
returned 1. We can save the hassle in the callers by just doing it right
away.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new infrastructure which stores the fds inside 'qemuFDPass'
objects in the private data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All callers now pass NULL/0 as arguments for vhostfd passing so we can
remove all the associated code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now all the helper variables and code are not needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new infrastructure which stores the fds inside 'qemuFDPass'
objects in the private data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the linebreaks inside of error messages.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All callers effectively pass 'net->driver.virtio.queues'. In case of the
code in 'qemu_hotplug.c' this value was set to '1' if it was 0 before.
Since 'qemuBuildNicDevProps' only uses it if it's greater than 1 we can
remove all the extra complexity.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add alternative code paths for passing of the FDs using the new
infrastructure. This way we'll be able to refactor the code
incrementally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After the 'qemuFDPass' code was refactored we no longer need to hand off
the FD to qemu before we know the path for it.
Thus the call to qemuBuildHostNetProps can be moved outside of the
monitor critical section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Pre-construct the array the same way for the case when there's only one
FD and when there are multiple. We just change the argument name
depending on the count.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the block guarded by 'is_tap' boolean to the only place where
'is_tap' is set to true.
This causes few arguments to change places.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the setup of the 'vdpa' netdev into the new helper shared between
commandline and hotplug code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The helper will aggregate code that is used to connect the network
backend to the corresponding host portion.
This will be used to refactor the duplicated code between the cold-start
and hotplug helper functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prepare for the upcoming refactor to use qemuFDPass for all the network
related file descriptors:
- tapfds
- vhostfds
- slirp
- vdpa
This patch adds the private data variables and a utility function to
clear it. Clearing is useful since we don't really need the data once
the VM is running so we save some memory.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While the FDs are closed right after use to prevent leaks, at certain
point we don't need the whole helper any more. Clear them for char
devices after hotplug and on start.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We don't want to keep the FDs open more than we need to.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only caller doesn't use the fdset info any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If we use our own fdset ID when hot-adding a fdset we can vastly
simplify our internals.
As a stop-gap when a fdset would be added behind libvirt's back we'll
validated that the fdset to be added is not yet used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While 'add-fd' qmp command gives the possibility to find an unused fdset
ID when hot-adding fdsets, such usage is extremely inconvenient.
This patch allows us to track the used fdset id so that we can avoid the
need to check results and thus employ simpler code flow when hot-adding
devices which use FD passing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code didn't check that the reply value is an array and that the
'fds' array is present. This could lead to a crash if qemu wouldn't
return an array in those places.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Libvirt doesn't use the returned value and in fact there's nothing we
could even do with them. Avoid parsing and storing them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We use the qemuFDPass infrastructure when building the command line,
refactor the monitor too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's effectively replaced by checks in qemuFDPassTransfer. This will
simplify cleanup paths on constructing the qemuFDPass object when FDs
are being handled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add validation to the transfer step to make the adding step more simple
for easier cleanup paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add possibility to delay checks to the point when the FDs are to be
passed to qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Calling virDomainRestoreFlags() with no typed params results in
an error in open() because it tries to open a NULL path.
Obviously, this is wrong and path to restore from must be
provided, at least for now until other sources of restore are
introduced. Then this limitation can be relaxed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When no VIR_DOMAIN_SAVE_PARAM_FILE typed param is set when
calling virDomainSaveParams() then in turn virQEMUFileOpenAs()
tries to open a NULL path.
We have two options now:
1) require the typed param, which in turn may be promoted to a
regular argument, or
2) use this opportunity to make the API behave like
virDomainManagedSave() and use typed params to pass extra
arguments, instead of having to invent new managed save API
with typed params.
Let's go with option 2, as it is more future proof.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The code that actually does managed save within
qemuDomainManagedSave() is going to be reused shortly. Move it
out into a separate helper.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The qemuDomainManagedSavePath() function does no more than a
g_strdup_printf() and as such can't return NULL really.
Therefore, don't check for its return value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Every running QEMU process we are willing to reconnect (i.e., at least
3.1.0) supports migration events and we can assume the capability is
already enabled since last time libvirt daemon connected to its monitor.
Well, it's not guaranteed though. If libvirt 1.2.17 or older was used to
start QEMU 3.1.0 or newer, migration events would not be enabled. And if
the user decides to upgrade libvirt from 1.2.17 to 8.4.0 while the QEMU
process is still running, they would not be able to migrate the domain
because of disabled migration events. I think we do not really need to
worry about this scenario as libvirt 1.2.17 is 7 years old while QEMU
3.1.0 was released only 3.5 years ago. Thus a chance someone would be
running such configuration should be fairly small and a combination with
upgrading 1.2.17 to 8.4.0 (or newer) with running domains should get it
pretty much to zero. The issue would disappear ff the ancient libvirt is
first upgraded to something older than 8.4.0 and then to the current
libvirt.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All QEMU versions we care about support migration events and we should
be able to enable the associated capability when connecting to the
monitor. Failure to do so is thus considered fatal now.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The code was a bit too complicated, especially after removing the check
for QEMU_CAPS_MIGRATION_EVENT.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All QEMU versions we care about already support migration events.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
A few commits ago new APIs were introduced (virDomainSaveParams()
and virDomainRestoreParams()) and with them new typed parameters:
VIR_SAVE_PARAM_FILE and VIR_SAVE_PARAM_DXML. But their name does
not suggest they apply to either of the APIs nor that they are
intended for domain related APIs. Switch to
VIR_DOMAIN_SAVE_PARAM prefix to make it obvious.
It's true we already have VIR_DOMAIN_SAVE_* symbols which are
part of virDomainSaveRestoreFlags enum, therefore stick also with
'_PARAM_ ' part of the name to differentiate the two.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For most of them qemu errors out with unclear message, and for the
audiodev qemu just falls back to timer-based audio with a warning
message, and will possibly also error out in the future.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2035163
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After previous cleanup the 'error' label in
qemuDomainObjPrivateXMLParse() contains nothing but a return
statement. Well, the label can be dropped and all 'goto'-s can be
replaced with the return statement directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The qemuDomainObjPrivateXMLParse() is responsible for parsing
given XML into qemuDomainObjPrivate struct. As it does so, memory
might be allocated for some members. If an error occurs during
parsing the control jumps onto 'error' label where only some of
previously allocated memory is freed. The reason there's no
memory leak is simple: the only caller (virDomainObjParseXML())
unrefs freshly created virDomainObj which in turn causes
qemuDomainObjPrivateFree() to be called. Therefore, these
partial, selective frees are needless and should be just dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that qemuDomainObjPrivate struct gained new member format it
into XML and parse it so that the value is preserved across
daemon restarts.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since v1.3.0-90-gafbe1d4c56 the original value of memlock limit
is stored inside virDomainObj struct directly (under
originalMemlock member). This is needless because the value is
used only inside QEMU driver and thus can reside in
qemuDomainObjPrivate struct.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add the ability to configure a qemu-vdagent in guest domains. This
device is similar to the spice vdagent channel except that qemu handles
the spice-vdagent protocol messages itself rather than routing them over
a spice protocol channel.
The qemu-vdagent device has two notable configuration options which
determine whether qemu will handle particular vdagent features:
'clipboard' and 'mouse'.
The 'clipboard' option allows qemu to synchronize its internal clipboard
manager with the guest clipboard, which enables client<->guest clipboard
synchronization for non-spice guests such as vnc.
The 'mouse' option allows absolute mouse positioning to be sent over the
vdagent channel rather than using a usb or virtio tablet device.
Sample configuration:
<channel type='qemu-vdagent'>
<target type='virtio' name='com.redhat.spice.0'/>
<source>
<clipboard copypaste='yes'/>
<mouse mode='client'/>
</source>
</channel>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This enumeration will be useful for vnc with the upcoming qemu-vdagent
device so make the name more generic.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Detect whether qemu supports the qemu-vdagent character device. This
enables support for copy/paste with VNC graphics.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
There's no real difference between
qemuSecurityStartVhostUserGPU() and qemuSecurityCommandRun(). The
latter is used more frequently while the former has just one
user. Therefore, drop the less frequently used one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It allows libvirt to provide the value of cpu0-id retuned by the Qemu QMP
command query-sev-capabilities as implemented by the Qemu Patch [1] which
is merged to Qemu master branch and should be available with Qemu 7.1.
This is used to get the signed Chip Endorsement Key (CEK) of the CPU of AMD
system from AMD's Key Distribution Service (KDS).
Similar to cbitpos, reducedPhysBits, maxGuests & maxESGuests;
the value of cpu0-id is also provided using 'virsh domcapability'.
[1] https://lore.kernel.org/all/20220228093014.882288-1-dovmurik@linux.ibm.com/
Signed-off-by: Niteesh Dubey <niteesh@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We do not need VIR_DOMAIN_VIRT_QEMU to get qemu default
version. With the 'os_type' and 'arch'in capabilities,
we could identify 'emulator' which is enough to get the version.
Actually VIR_DOMAIN_VIRT_QEMU is not the only domain virt type for
qemu driver, there are VIR_DOMAIN_VIRT_KVM and VIR_DOMAIN_VIRT_HVF.
If TCG is disabled in qemu, it will cause the error that could not
find suitable emulater when access version.
Signed-off-by: Liang Yan <lyan@digtalocean.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The iSCSI hostdev code doesn't require the check for the empty drive
and the check for the protocol because those are already guaranteed at
that point.
In qemuDomainSecretStorageSourcePrepare we don't need to check the
network disk type either as it's now guaranteed by the definition
validator.
Thus both callers can simply check whether src->auth is present and the
helper can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we are already checking that the encryption format can be only
_LUKS and _LUKS2 this wrapper function doesn't make much sense any more.
The only one caller can do this internally.
The move of virStorageSourceIsEmpty is correct as there are no secrets
to setup if the disk is empty anyways.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The validation should be the only point to decide whether authentication
is supported for a disk backing protocol. The rest of the code can then
simply always enable it.
This also fixes a crash when authentication is requested e.g. for a HTTP
backed disk as the blockdev props formatter expects that it was already
set up.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the impossible error message about the 'qcow2' encryption format
not being supported. We validated before that it can't happen.
Additionally the code can be simplified by removing error handling from
impossible code paths as the last resort is virJSONValueCreate not
allowing NULL argument with the 's:' modifier.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reject encryption requests for unsupported image format types.
Add negative test for the rejected cases as well as modify
'disk-network-rbd-encryption' case to validate that with librbd
encryption the format doesn't matter.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the two ad-hoc checks below into the block which already tests
whether encryption is requested.
If we first disallow the old-style qcow2 encryption we can remove a
whole block of validation later on.
Also the capability check for qcow2+luks can be simplified by moving it
into the same block.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is a quite an old (created at 2016) patch fixing an issue for at
that time contemporary Fedora 23. virsh reboot returns success (yet
after hanging for a while), VM is rebooted sucessfully too but then
shutdown from inside guest causes reboot and not shutdown.
VM has agent installed. So virsh reboot first tries to reboot VM thru
the agent. The agent calls 'shutdown -r' command. Typically it returns
instantly but on this distro for some reason it takes time. I did not
investigate the cause but the command waits in dbus client code,
probably waits for reply. The libvirt waits 60s for agent command to
execute and then errors out. Next reboot API falls back to ACPI shutdown
which returns successfully thus the reboot command return success too.
Yet shutdown command in guest eventually successfull and guest is truly
rebooted. So libvirt does not receive SHUTDOWN event and fake reboot
flag which is armed on fallback path stays armed. Thus next shutdown
from guest leads to reboot.
The issue has 100% repro on Fedora 23. On modern distros I can't
reproduce it at all. Shutdown command is asynchronous and returns
immediately even if I start some service that ignores TERM signal and
thus shutdown procedure waits for 90s (if I not mistaken) before sending
KILL.
Yet I guess it is nice to have this patch to be more robust.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nikolay.shirokovskiy@openvz.org>
When <qemu:override> is the only usage of the qemu namespace the entire
section is mistakenly removed. Add check for use count.
Signed-off-by: Justin Gatzen <justin.gatzen@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The point of qemu_processpriv.h file is to allow a small subset
of functions to be called from test suite but not elsewhere. This
is implemented by requiring everybody that includes the file to
define a macro. If not done so, an error is printed at compile
time. However, this error message contains a typo because it
mentions qemu_process_priv.h while the file is called
qemu_processpriv.h.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Sometimes it may come handy to learn what address is a NVDIMM
mapped to inside a guest. While users can provide an address they
want to have NVDIMM mapped to, it's optional. Fortunately, when a
domain is being started we issue the 'query-memory-devices'
monitor command and the reply is the same for 'dimm' and 'nvdimm'
types. Therefore, updating NVDIMM address is trivial.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
[1] closes gap in virDomainObjListRemove so that concurrent thread can
not step in and obtain the domain while domain is temporary unlocked. But
there is another gap exist:
thread B - executes create API
thread C - executes undefine API
- thread A executes some job on domain
- threads B and C obtains domain from list and wait for job condition
- thread A finishes its job and C grabs job condition, removes domain
from list and finishes
- thread B grabs job condition and start the domain, unfortunately
is not in the list already
[1] commit c7d1c139ca
Author: Martin Kletzander <mkletzan@redhat.com>
Date: Thu Dec 11 11:14:08 2014 +0100
qemu: avoid rare race when undefining domain
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@openvz.org>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Acquiring job introduced in commit [1] to fix a race described in the
commit. Actually it does not help because we get domain in create API
before acuiring job. Then [2] fixed the race but [1] was not reverted even
it is does not required by [2] to work properly.
[1] commit b629c64e5e
Author: Martin Kletzander <mkletzan@redhat.com>
Date: Thu Oct 30 14:38:35 2014 +0100
qemu: avoid rare race when undefining domain
[2] commit c7d1c139ca
Author: Martin Kletzander <mkletzan@redhat.com>
Date: Thu Dec 11 11:14:08 2014 +0100
qemu: avoid rare race when undefining domain
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@openvz.org>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
SPICE ports cleanup looks overly complicated. We can just set *reserved
flags whenever port is reserved (auto or non auto).
Also *Reserved flags are not cleared on stop in case of reconnect with
autoport (flags are set on reconnect in qemuProcessGraphicsReservePorts
call). Yeah config is freed in the end of stopping domain but still.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@openvz.org>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
VNC websocket port cleanup looks a bit repetetive. Let's set websocketReserved
flag whenever we reserve port (auto or not).
Also websocketReserved flag is not cleared on stop in case of reconnect with
auto port (flags is set on reconnect in qemuProcessGraphicsReservePorts
call). Yeah config is freed in the end of stopping domain but still.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@openvz.org>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
