Otherwise in some places we can mistakenly report 'unsupported' error instead
of root cause. So let's handle root cause explicitly from the macro.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When an interface has some bandwidth limitation set (it's root
qdisc is htb in that case) but this gets cleared out via public
API call (virDomainSetInterfaceParameters() or
virDomainUpdateDeviceFlags()) then virNetDevBandwidthSet() clears
out whatever qdiscs were set on the interface and kernel places
the default qdisc at the root. What we need to do next is to
replace the root qdisc with the one we want.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1329644
Fixes: 0b66196d86
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While the code that's setting default qdisc is clever enough to
not overwrite any bandwidth (potentially) set by
virNetDevBandwidthSet() (and thus the root qdisc htb is not
replaced with noqueue), it does print a debug message when that's
the case. It's needless. We can set the root qdisc beforehand and
let virNetDevBandwidthSet() overwrite it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Some secdrivers (typically SELinux driver) generate unique
dynamic seclabel for each domain (unless a static one is
requested in domain XML). This is achieved by calling
qemuSecurityGenLabel() from qemuProcessPrepareDomain() which
allocates unique seclabel and stores it in domain def->seclabels.
The counterpart is qemuSecurityReleaseLabel() which releases the
label and removes it from def->seclabels. Problem is, that with
current code the qemuProcessStop() may still want to use the
seclabel after it was released, e.g. when it wants to restore the
label of a disk mirror.
What is happening now, is that in qemuProcessStop() the
qemuSecurityReleaseLabel() is called, which removes the SELinux
seclabel from def->seclabels, yada yada yada and eventually
qemuSecurityRestoreImageLabel() is called. This bubbles down to
virSecuritySELinuxRestoreImageLabelSingle() which find no SELinux
seclabel (using virDomainDefGetSecurityLabelDef()) and this
returns early doing nothing.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1751664
Fixes: 8fa0374c5b
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The only reason why virstoragefile.h needs to be included in virfile.h
is that virFileNBDDeviceAssociate() takes virStorageFileFormat argument.
The function doesn't need the enum value as it converts the value to
string and uses only that.
Change the argument to string which will allow us to remove that
include.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All these headers are indirectly included provided by virfile.h having
virstoragefile.h which will be removed in the following patch.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The function doesn't take virStorageSource as argument and has nothing
in common with virStorageSource or storage file.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Function virQEMUBuildQemuImgKeySecretOpts is not used anywhere else
so there is no need to have it in util.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The last usage outside of tests was removed by commit
<780f8c94ca8b3dee7eb59c1bfbc32f672f965df8>.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The last user was removed by commit
<40f0e0348dfc84f28a500e262c4953b0d3b44fa0>.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Currently, swtpm TPM state file is removed when a transient domain is
powered off or undefined. When we store TPM state on a shared storage
such as NFS and use transient domain, TPM states should be kept as it is.
Add per-TPM emulator option `persistent_sate` for keeping TPM state.
This option only works for the emulator type backend and looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator' persistent_state='yes'/>
</tpm>
Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The kernel refuses to set guest TSC frequency less than a minimum
frequency or greater than maximum frequency (both computed based on the
host TSC frequency). When writing the libvirt code with a reversed logic
(return success when the requested frequency falls within the tolerance
interval) I forgot to include the boundaries.
Fixes: d8e5b45600https://bugzilla.redhat.com/show_bug.cgi?id=1839095
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Refactor in 0316c28a45 used incorrect source variable to initialize
the variable which holds the name of the bitmap which needs to be
deleted after the backup job finishes. This resulted into deleting the
source bitmap of the backup rather than the temporary one.
Use 'dd->incrementalBitmap' which holds the temporary bitmap name
instead of 'dd->backupdisk->incremental' which holds the name of the
source bitmap which is used by the backup.
Fixes: 0316c28a45
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1908647
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When starting a VM with an empty cdrom which has <iotune> configured the
startup fails as qemu is not happy about setting tuning for an empty
drive:
error: internal error: unable to execute 'block_set_io_throttle', unexpected error: 'Device has no medium'
Resolve this by skipping the setting of throttling for empty drives and
updating the throttling when new medium is inserted into the drive.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/111
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This is perfectly valid in VMWare and the VM just boots with an empty drive. We
used to just skip the whole drive before, but since we changed how we parse
empty cdrom drives this results in an error. Make it behave more closer to
VMWare.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1903953
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
And return the actual extracted value in a parameter. This way we can later
return success even without any extracted value.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The positive branch can just return and the huge negative part does not need to
be indented an extra level. Best viewed with `-w`.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Remove @ret and @created variables which are not needed really.
Signed-off-by: Yi Li <yili@winhong.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
None of the callers care about errno really. The errno will be
reported by virReportSystemError().
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The caller doesn't care about errno really. The errno will be
reported by virReportSystemError().
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, we configure QEMU to prealloc memory almost by
default. Well, by default for NVDIMMs, hugepages and if user
asked us to (via memoryBacking <allocation mode="immediate"/>).
However, when guest's NVDIMM is backed by real life NVDIMM this
approach is not the best. In this case users should put <pmem/>
into the <memory/> device <source/>, like this:
<memory model='nvdimm' access='shared'>
<source>
<path>/dev/pmem0</path>
<pmem/>
</source>
</memory>
Instructing QEMU to do prealloc in this case means that each
page of the NVDIMM is "touched" (the first byte is read and
written back - see QEMU commit v2.9.0-rc1~26^2) which cripples
device wear.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1894053
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When rewriting the function, I've mistakenly declared a variable
and assigned it to itself. Let's initialize the variable properly.
Fixes: 5fb6d98c88
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There are a few places where we open code virStrcpy() or
virStrcpyStatic(). Call respective functions instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In virSecurityLabelDefParseXML() we are parsing the <seclabel/>
element among with its attributes. Some of the attributes are
limited in length (because of virNodeGetSecurityModel()), however
some are not. And for the latter ones we don't need to use
virXMLPropStringLimit() to parse them. Moreover, using
VIR_SECURITY_LABEL_BUFLEN as the limit is wrong - we are not
storing the parsed strings into a static buffer of that size
rather than checking if the string passes string -> enum
conversion.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While previously we returned 0 this is not correct. We have to
return a negative value to indicate error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Even though we are getting driver capabilities with
refresh=false (so that it is not expensive), we still should do
ACL check first because there is no point in bothering with the
capabilities if caller doesn't have permissions to call the API.
Also, this way the comment makes more sense.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code we have there to copy seclabel model or doi can be
replaced by virStrcpy() calls which do exactly the same checks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After v6.3.0-rc1~64 a lease can have infinite expiry time. This
means that the expiration time will appear as a value of zero.
Do the expiration check only if the expiration time is not zero.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1908053
Fixes: 97a0aa2467
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Firstly, bring variables that are used only within loops into
their respective loops. Secondly, drop 'error' label which is
redundant since we have @rv which holds the return value.
Thirdly, fix indendation in one case, the rest is indented
properly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This function is misusing VIR_INSERT_ELEMENT() to behave like
VIR_APPEND_ELEMENT(). Use the latter to make it explicit what we
are trying to achieve.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We don't need to track the lease file size. Instead, we can
simply check if the file was empty by comparing the buffer the
file was read into with an empty string.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When adding a new lease by our leaseshelper then virLeaseNew() is
called. Here, we check for DNSMASQ_LEASE_EXPIRES environment
variable which is the expiration time for the lease. For infinite
lease time the value is zero. However, our code is not prepared
for that and adds "expiry-time" into the JSON file only if lease
expiry time is non-zero. This breaks the assumption that the
"expiry-time" attribute is always present (as can be seen in
virLeaseReadCustomLeaseFile() and virLeasePrintLeases()).
Store "expiry-time" always.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In virLeaseNew() we are trying to remove trailing space (per
comment it may happen that older versions of dnsmasq put it into
an env variable). Well, instead of open coding it, we can use
virTrimSpaces().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are some variables which are used only inside the single
loop the function has. Let's declare them inside the loop body to
make that obvious. Also, fix indendation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If leasehelper fails all that we are left with is a simple error
message produced by dnsmasq:
lease-init script returned exit code 1
This is because the leasehelper did not write any message to
stderr. According to dnsmasq's manpage, whenever it's invoking
leasehelper the stderr is kept open:
All file descriptors are closed except stdin, which is open to
/dev/null, and stdout and stderr which capture output for
logging by dnsmasq.
As debugging leasehelper is not trivial (because dnsmasq invokes
it with plenty of env vars set - that's how data is passed onto
helper), let's print an error into stderr if exiting with an
error. And since we are not calling public APIs, we have to call
virDispatchError() explicitly and since we don't have any
connection open, we have to pass NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In recent patches new mambers to _qemuAgentDiskAddress struct
were introduced to keep optional CCW address sent by the guest
agent. These two members are a struct to store CCW address into
and a boolean to keep track whether the CCW address is valid.
Well, we can hold the same information with a pointer - instead
of storing the CCW address structure let's keep just a pointer to
it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
On s390x, devices are attached to the channel IO subsytem by default,
so we need to look up scsi controllers via their CCW address there
instead of using PCI.
This fixes "virsh domfsinfo" on s390x for virtio-scsi devices (the first
attempt from commit f8333b3b0a did it in the wrong way, reporting the
device name on the guest side instead of the target name on the host side).
Fixes: f8333b3b0a ("qemu: Fix domfsinfo for non-PCI device information ...")
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1858771
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
On s390x, devices are accessed via the channel subsystem by default,
so we need to look up the devices via their CCW address there instead
of using PCI.
This fixes "virsh domfsinfo" on s390x for virtio-block devices (the first
attempt from commit f8333b3b0a did it in the wrong way, reporting the
device name on the guest side instead of the target name on the host side).
Fixes: f8333b3b0a ("qemu: Fix domfsinfo for non-PCI device information ...")
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1858771
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Newer versions of the QEMU guest agent will provide the CCW address
of devices on s390x. Store this information in the qemuAgentDiskInfo
so that we can use this later.
We also map the CSSID 0 from the guest to the value 0xfe on the host,
see https://www.qemu.org/docs/master/system/s390x/css.html for details.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Our parser code relies on the fact that
VIR_LXC_DOMAIN_NAMESPACE_SOURCE_NONE has value of zero and thus
uses g_new0(). But strictly speaking, this is not mandated by
the enum typedef. Fix that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
While fixing our schema for <lxc:namespace/> I've looked into the
parser and realized it could use some treating.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
As all other free functions, NULL should be accepted. Even though
there currently is no caller that would pass NULL, there will be
in future patches.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
During testing of my patch v6.10.0-rc1~221 it was found that
'ovs-vsctl get Interface $name name' or
'ovs-vsctl find Interface options:vhost-server-path=$path'
may return a string in double quotes, e.g. "vhost-user1". Later
investigation of openvswitch code showed, that early versions
(like 1.3.0) have somewhat restrictive set of safe characters
(isalpha() || '_' || '-' || '.'), which is then refined with
increasing version. For instance, version 2.11.4 has: isalnum()
|| '_' || '-' || '.'. If the string that ovs-vsctl wants to
output contains any other character it is escaped. You want to be
looking at ovsdb_atom_to_string() which handles outputting of a
single string and calls string_needs_quotes() and possibly
json_serialize_string() in openvswitch code base.
Since the interfaces are usually named "vhost-userN" we are
facing a problem where with one version we get the name in double
quotes and with another we get plain name without funny business.
Because of json involved I thought, let's make ovs-vsctl output
into JSON format and then use our JSON parser, but guess what -
ovs-vsctl ignores --format=json. But with a little help of
g_strdup_printf() it can be turned into JSON.
Fixes: e4c29e2904
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1767013
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
In v6.10.0-rc1~221 I wanted to make virNetDevOpenvswitchGetVhostuserIfname()
lookup interface name even for vhostuser interfaces with mode='server'. For
these, we are given a socket path which is then created by QEMU and to which
OpenVSwitch connects to and creates an interface. Because of this, we don't
know the name of the interface upfront (when starting QEMU) and have to use
the path to query OpenVSwitch later (using ovs-vsctl). What I intended to use
was:
ovs-vsctl --no-headings --columns=name find Interface options:vhost-server-path=$path
But what my code does is:
ovs-vsctl --no-headings --columns=name find Interface options:vhost-server-path=path
and it's all because the argument to the function is named "path"
which I then enclosed in double quotes while it should have been
used as a variable.
Fixes: e4c29e2904
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1767013
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
the lxc driver uses virNetDevGenerateName() for its veth device names
since patch 2dd0fb492, so it should be using virNetDevReserveName()
during daemon restart/reconnect to skip over the device names that are
in use.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>