Newer git doesn't like the maint.mk rule 'public-submodule-commit'
run during 'make check', as inherited from our checkout of gnulib.
I tracked down that libvirt commit 8531301 picked up a gnulib fix
that makes git happy. Rather than try and do a full .gnulib
submodule update to gnulib.git d18d1b802 (as used in that libvirt
commit), it was easier to just backport the fixed maint.mk from
gnulib on top of our existing submodule level. I did it as follows,
where these steps will have to be repeated when cherry-picking this
commit to any other maintenance branch:
mkdir -p gnulib/local/top
cd .gnulib
git checkout d18d1b802 top/maint.mk
git diff HEAD > ../gnulib/local/top/maint.mk.diff
git reset --hard
cd ..
git add gnulib/local/top
Signed-off-by: Eric Blake <eblake@redhat.com>
We publish libvirt-api.xml for others to use, and in fact, the
libvirt-python bindings use it to generate python constants that
correspond to our enum values. However, we had an off-by-one bug
that any enum that relied on C's rules for implicit initialization
of the first enum member to 0 got listed in the xml as having a
value of 1 (and all later members of the enum were equally
botched).
The fix is simple - since we add one to the previous value when
encountering an enum without an initializer, the previous value
must start at -1 so that the first enum member is assigned 0.
The python generator code has had the off-by-one ever since DV
first wrote it years ago, but most of our public enums were immune
because they had an explicit = 0 initializer. The only affected
enums are:
- virDomainEventGraphicsAddressType (such as
VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV4), since commit 987e31e
(libvirt v0.8.0)
- virDomainCoreDumpFormat (such as VIR_DOMAIN_CORE_DUMP_FORMAT_RAW),
since commit 9fbaff0 (libvirt v1.2.3)
- virIPAddrType (such as VIR_IP_ADDR_TYPE_IPV4), since commit
03e0e79 (not yet released)
Thanks to Nehal J Wani for reporting the problem on IRC, and
for helping me zero in on the culprit function.
* docs/apibuild.py (CParser.parseEnumBlock): Fix implicit enum
values.
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 9b291bbe20c36c0820c6e7cd2bf6229bf41807e8)
Conflicts:
docs/apibuild.py - context with 2a40951
When creating a new disk mirror the new struct is stored in a separate
variable until everything went well. The removed hunk would actually
remove existing mirror information for example when the api would be run
if a mirror still exists.
(cherry picked from commit 02b364e186d487f54ed410c01af042f23e812d42)
This fixes a regression introduced in commit ff5f30b.
Signed-off-by: Eric Blake <eblake@redhat.com>
Conflicts:
src/qemu/qemu_driver.c - no refactoring of commits 7b7bf001, 4f20226, a88fb30
If the XML_PARSE_NOENT flag is passed to libxml2, then any
entities in the input document will be fully expanded. This
allows the user to read arbitrary files on the host machine
by creating an entity pointing to a local file. Removing
the XML_PARSE_NOENT flag means that any entities are left
unchanged by the parser, or expanded to "" by the XPath
APIs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit d6b27d3e4c40946efa79e91d134616b41b1666c4)
libxl uses the libxl_vnc_info and libxl_sdl_info fields from the
hvm union in libxl_domain_build_info struct when generating QEMU
args for VNC or SDL. These fields were left unset by the libxl
driver, causing libxl to ignore any user settings. E.g. with
<graphics type='vnc' port='5950'/>
port would be ignored and QEMU would instead be invoked with
-vnc 127.0.0.1:0,to=99
Unlike the libxl_domain_config struct, the libxl_domain_build_info
contains only a single libxl_vnc_info and libxl_sdl_info, so
populate these fields from the first vfb in
libxl_domain_config->vfbs.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: David Kiarie <davidkiarie4@gmail.com>
(cherry picked from commit b55cc5f4e31b488c4f9c3c8470c992c1f8f5d09c)
There has been a new field introduced in iscsiadm --mode session
output [1], but our regex only expects four fields. This breaks
startup of iscsi pools:
error: Failed to start pool iscsi
error: internal error: cannot find session
Fix this by ignoring anything after the fourth field.
https://bugzilla.redhat.com/show_bug.cgi?id=1067173
[1] https://github.com/mikechristie/open-iscsi/commit/181af9a
(cherry picked from commit 57e17a74b76fd8f93012d6d0407106e9a2d5c5e3)
If a domain network interface that contains a <filterref> is modified
"live" using "virsh update-device --live", libvirtd would crash. This
was because the code supporting live update of an interface's
filterref was assuming that a filterref might be added or modified,
but didn't account for removing the filterref, resulting in a null
dereference of the filter name.
Introduced with commit 258fb278, which was first in libvirt v1.0.1.
This addresses https://bugzilla.redhat.com/show_bug.cgi?id=1093301
(cherry picked from commit 0eac9d1e90fc3388030c6109aeb1f4860f108054)
Commit 5b3492fa aimed to fix this and caught one error but exposed
another one. When agent command is being executed and the thread
waiting for the reply is woken up by an event (e.g. EOF in case of
shutdown), the command finishes with no data (rxObject == NULL), but
no error is reported, since this might be desired by the caller
(e.g. suspend through agent). However, in other situations, when the
data are required (e.g. getting vCPUs), we proceed to getting desired
data out of the reply, but none of the virJSON*() functions works well
with NULLs. I chose the way of a new parameter for qemuAgentCommand()
function that specifies whether reply is required and behaves
according to that.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1058149
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
(cherry picked from commit 736e017e3608ce4c97ee519a293ff7faecea040d)
Conflicts:
src/qemu/qemu_agent.c -- vCPU functions (3099c063)
On all the places where qemuAgentComand() was called, we did a check
for errors in the reply. Unfortunately, some of the places called
qemuAgentCheckError() without checking for non-null reply which might
have resulted in a crash.
So this patch makes the error-checking part of qemuAgentCommand()
itself, which:
a) makes it look better,
b) makes the check mandatory and, most importantly,
c) checks for the errors if and only if it is appropriate.
This actually fixes a potential crashers when qemuAgentComand()
returned 0, but reply was NULL. Having said that, it *should* fix the
following bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1058149
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
(cherry picked from commit 5b3492fadb6bfddd370e263bf8a6953b1b26116f)
Conflicts:
src/qemu/qemu_agent.c -- vCPU functions (3099c063)
The code for arbitrary guest agent passthrough was horribly broken since
introduction. Fix it to correctly report errors.
(cherry picked from commit 6e5b36d5d2fbe3c207651ab653b552dcae6af888)
Currently, we use pthread_sigmask(SIG_BLOCK, ...) prior to calling
poll(). This is okay, as we don't want poll() to be interrupted.
However, then - immediately as we fall out from the poll() - we try to
restore the original sigmask - again using SIG_BLOCK. But as the man
page says, SIG_BLOCK adds signals to the signal mask:
SIG_BLOCK
The set of blocked signals is the union of the current set and the set argument.
Therefore, when restoring the original mask, we need to completely
overwrite the one we set earlier and hence we should be using:
SIG_SETMASK
The set of blocked signals is set to the argument set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
(cherry picked from commit 3d4b4f5ac634c123af1981084add29d3a2ca6ab0)
The nwfilter conf update mutex previously serialized
updates to the internal data structures for firewall
rules, and updates to the firewall itself. The latter
was recently turned into a read/write lock, and filter
instantiation allowed to proceed in parallel. It was
believed that this was ok, since each filter is created
on a separate iptables/ebtables chain.
It turns out that there is a subtle lock ordering problem
on virNWFilterObjPtr instances. __virNWFilterInstantiateFilter
will hold a lock on the virNWFilterObjPtr it is instantiating.
This in turn invokes virNWFilterInstantiate which then invokes
virNWFilterDetermineMissingVarsRec which then invokes
virNWFilterObjFindByName. This iterates over every single
virNWFilterObjPtr in the list, locking them and checking their
name. So if 2 or more threads try to instantiate a filter in
parallel, they'll all hold 1 lock at the top level in the
__virNWFilterInstantiateFilter method which will cause the
other thread to deadlock in virNWFilterObjFindByName.
The fix is to add an exclusive mutex to serialize the
execution of __virNWFilterInstantiateFilter.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 925de19ed7f13e0d12d0b993496d314bab886589)
Conflicts:
src/nwfilter/nwfilter_gentech_driver.c
Rewrite multiple hotunplug functions to to use the
virProcessRunInMountNamespace helper. This avoids
risk of a malicious guest replacing /dev with an absolute
symlink, tricking the driver into changing the host OS
filesystem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 5fc590ad9f4071350a8df4d567ba88baacc8334d)
Conflicts:
src/lxc/lxc_driver.c: OOM + cgroups error reporting
Rewrite lxcDomainAttachDeviceHostdevMiscLive function
to use the virProcessRunInMountNamespace helper. This avoids
risk of a malicious guest replacing /dev with a absolute
symlink, tricking the driver into changing the host OS
filesystem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 1cadeafcaa422844a27ef622e2a7041d0235bcb3)
Conflicts:
src/lxc/lxc_driver.c: OOM + cgroups error reporting
Rewrite lxcDomainAttachDeviceHostdevStorageLive function
to use the virProcessRunInMountNamespace helper. This avoids
risk of a malicious guest replacing /dev with a absolute
symlink, tricking the driver into changing the host OS
filesystem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 1754c7f0ab1407dcf7c89636a35711dd9b1febe1)
Conflicts:
src/lxc/lxc_driver.c: OOM + cgroups error reporting
Rewrite lxcDomainAttachDeviceHostdevSubsysUSBLive function
to use the virProcessRunInMountNamespace helper. This avoids
risk of a malicious guest replacing /dev with a absolute
symlink, tricking the driver into changing the host OS
filesystem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 7fba01c15c1f886b4235825692b4c13e88dd9f7b)
Conflicts:
src/lxc/lxc_driver.c: OOM + cgroups error reporting
Rewrite lxcDomainAttachDeviceDiskLive function to use the
virProcessRunInMountNamespace helper. This avoids risk of
a malicious guest replacing /dev with a absolute symlink,
tricking the driver into changing the host OS filesystem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 4dd3a7d5bc44980135a1b11810ba9aeab42a4a59)
Conflicts:
src/lxc/lxc_driver.c: OOM + cgroups error reporting and
remove usernamespace integration
Use helper virProcessRunInMountNamespace in lxcDomainShutdownFlags and
lxcDomainReboot. Otherwise, a malicious guest could use symlinks
to force the host to manipulate the wrong file in the host's namespace.
Idea by Dan Berrange, based on an initial report by Reco
<recoverym4n@gmail.com> at
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=732394
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit aebbcdd33c8c18891f0bdbbf8924599a28152c9c)
Conflicts:
src/lxc/lxc_driver.c: OOM error reporting changes
src/util/virinitctl.c: OOM error reporting changes
Implement virProcessRunInMountNamespace, which runs callback of type
virProcessNamespaceCallback in a container namespace. This uses a
child process to run the callback, since you can't change the mount
namespace of a thread. This implies that callbacks have to be careful
about what code they run due to async safety rules.
Idea by Dan Berrange, based on an initial report by Reco
<recoverym4n@gmail.com> at
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=732394
Signed-off-by: Daniel Berrange <berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 7c72ef6f555f1f9844d51be2f38f078bc908652c)
Backport fixed for OOM error reporting
Add a helper function which takes a file path and ensures
that all directory components leading up to the file exist.
IOW, it strips the filename part of the path and passes
the result to virFileMakePath.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit c321bfc5c37c603af349dacf531bb03c91b0755e)
Conflicts:
src/libvirt_private.syms,
src/util/virfile.c,
src/util/virfile.h: Moved code to virutil.{c,h}
The check for whether the cgroup devices ACL is available is
done quite late during LXC hotplug - in fact after the device
node is already created in the container in some cases. Better
to do it upfront so we fail immediately.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit c3eb12cace868884393d35c23278653634d81c70)
The LXC disk hotplug code was allowing block or character devices
to be given as disk. A disk is always a block device.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit d24e6b8b1eb87daa6ee467b76cf343725468949c)
When detaching a USB device from an LXC guest we must remove
the device from the cgroup ACL. Unfortunately we were telling
the cgroup code to use the guest /dev path, not the host /dev
path, and the guest device node had already been unlinked.
This was, however, fortunate since the code passed &priv->cgroup
instead of priv->cgroup, so would have crash if the device node
were accessible.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 2c2bec94d27ccd070bee18a6113b1cfea6d80126)
After hotplugging a USB device, the LXC driver forgot
to add the device def to the virDomainDefPtr.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit a537827d15516f2b59afb23ce2d50b8a88d7f090)
Backport fixed for OOM error reporting
The LXC code missed the 'usb' component out of the path
/dev/bus/usb/$BUSNUM/$DEVNUM, so it failed to actually
setup cgroups for the device. This was in fact lucky
because the call to virLXCSetupHostUsbDeviceCgroup
was also mistakenly passing '&priv->cgroup' instead of
just 'priv->cgroup'. So once the path is fixed, libvirtd
would then crash trying to access the bogus virCgroupPtr
pointer. This would have been a security issue, were it
not for the bogus path preventing the pointer reference
being reached.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit c3648972222d4eb056e6e667c193ba56a7aa3557)
virDomainDefCompatibleDevice blocks use of USB if no USB
controller is present. This is not correct for containers
since devices can be assigned directly regardless of any
controllers.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 7a44af963ef75c487f874bc91613ad45e5b167e9)
Our backing file chain code was not very robust to an ill-timed
EINTR, which could lead to a short read causing us to randomly
treat metadata differently than usual. But the existing
virFileReadLimFD forces an error if we don't read the entire
file, even though we only care about the header of the file.
So add a new virFile function that does what we want.
* src/util/virfile.h (virFileReadHeaderFD): New prototype.
* src/util/virfile.c (virFileReadHeaderFD): New function.
* src/libvirt_private.syms (virfile.h): Export it.
* src/util/virstoragefile.c (virStorageFileGetMetadataInternal)
(virStorageFileProbeFormatFromFD): Use it.
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 5327fad4f292e4f3f84884ffe158c492bf00519c)
Conflicts:
src/util/virstoragefile.c: OOM error reporting & buffer signedness
Conflicts:
src/libvirt_private.syms,
src/util/virfile.c,
src/util/virfile.h: Moved code to virutil.{c,h}
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 5b4c035b08c122c3ae15aee7c13ce0f480586502)
Conflicts:
docs/news.html.in: old releases
Create parent directroy for hostdev automatically when we
start a lxc domain or attach a hostdev to a lxc domain.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
(cherry picked from commit 468ee0bc4d6007f4af51235838cac7499fa22773)
Many methods accept a string parameter specifying the
old root directory prefix. Since removal of the non-pivot
root container setup codepaths, this parameter is obsolete
in many methods where the callers always pass "/.oldroot".
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 31453a837b5de51182b678240d2736de62642a97)
This helper function is used to create parent directory for
the hostdev which will be added to the container. If the
parent directory of this hostdev doesn't exist, the mknod of
the hostdev will fail. eg with /dev/net/tun
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
(cherry picked from commit c0d8c7c88579c612cf8a9776d276f8fd59d779f3)
Adapted to lack of VIR_STRDUP
The NWFilter code has as a deadlock race condition between
the virNWFilter{Define,Undefine} APIs and starting of guest
VMs due to mis-matched lock ordering.
In the virNWFilter{Define,Undefine} codepaths the lock ordering
is
1. nwfilter driver lock
2. virt driver lock
3. nwfilter update lock
4. domain object lock
In the VM guest startup paths the lock ordering is
1. virt driver lock
2. domain object lock
3. nwfilter update lock
As can be seen the domain object and nwfilter update locks are
not acquired in a consistent order.
The fix used is to push the nwfilter update lock upto the top
level resulting in a lock ordering for virNWFilter{Define,Undefine}
of
1. nwfilter driver lock
2. nwfilter update lock
3. virt driver lock
4. domain object lock
and VM start using
1. nwfilter update lock
2. virt driver lock
3. domain object lock
This has the effect of serializing VM startup once again, even if
no nwfilters are applied to the guest. There is also the possibility
of deadlock due to a call graph loop via virNWFilterInstantiate
and virNWFilterInstantiateFilterLate.
These two problems mean the lock must be turned into a read/write
lock instead of a plain mutex at the same time. The lock is used to
serialize changes to the "driver->nwfilters" hash, so the write lock
only needs to be held by the define/undefine methods. All other
methods can rely on a read lock which allows good concurrency.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 6e5c79a1b5a8b3a23e7df7ffe58fb272aa17fbfb)
Conflicts:
src/conf/nwfilter_conf.c
- virReportOOMError() in context of one hunk.
src/lxc/lxc_driver.c
- functions renamed, and lxc object locking changed, creating
a conflict in the context.
Add virRWLock backed up by a POSIX rwlock primitive
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit c065984b58000a44c90588198d222a314ac532fd)
For inexplicable reasons, the nwfilter XML parser is intentionally
ignoring errors that arise during parsing. As well as meaning that
users don't get any feedback on their XML mistakes, this will lead
it to silently drop data in OOM conditions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 4f2094346d98f4ed6a2de115d204c166cc563496)
Conflicts:
tests/nwfilterxml2xmltest.c
- args to virNWFilterDefParseString are different, causing
small conflict in context.
Currently the virDBusAddWatch does
virEventAddHandle(fd, flags,
virDBusWatchCallback,
watch, NULL);
dbus_watch_set_data(watch, info, virDBusWatchFree);
Unfortunately this is racy - since the event loop is in a
different thread, the virDBusWatchCallback method may be
run before we get to calling dbus_watch_set_data. We must
reverse the order of these calls
See https://bugzilla.redhat.com/show_bug.cgi?id=885445
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
(cherry picked from commit 7d3a1c8bd1a2d376dfb5d7ee6a1bca8772ec2949)
https://bugzilla.redhat.com/show_bug.cgi?id=1047577
When writing commit 173c291, I missed the fact virNetServerClientClose
unlocks the client object before actually clearing client->sock and thus
it is possible to hit a window when client->keepalive is NULL while
client->sock is not NULL. I was thinking client->sock == NULL was a
better check for a closed connection but apparently we have to go with
client->keepalive == NULL to actually fix the crash.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
(cherry picked from commit 066c8ef6c18bc1faf8b3e10787b39796a7a06cc0)
https://bugzilla.redhat.com/show_bug.cgi?id=1047577
When a client closes its connection to libvirtd early during
virConnectOpen, more specifically just after making
REMOTE_PROC_CONNECT_SUPPORTS_FEATURE call to check if
VIR_DRV_FEATURE_PROGRAM_KEEPALIVE is supported without even waiting for
the result, libvirtd may crash due to a race in keep-alive
initialization. Once receiving the REMOTE_PROC_CONNECT_SUPPORTS_FEATURE
call, the daemon's event loop delegates it to a worker thread. In case
the event loop detects EOF on the connection and calls
virNetServerClientClose before the worker thread starts to handle
REMOTE_PROC_CONNECT_SUPPORTS_FEATURE call, client->keepalive will be
disposed by the time virNetServerClientStartKeepAlive gets called from
remoteDispatchConnectSupportsFeature. Because the flow is common for
both authenticated and read-only connections, even unprivileged clients
may cause the daemon to crash.
To avoid the crash, virNetServerClientStartKeepAlive needs to check if
the connection is still open before starting keep-alive protocol.
Every libvirt release since 0.9.8 is affected by this bug.
(cherry picked from commit 173c2914734eb5c32df6d35a82bf503e12261bcf)
CVE-2013-6458
Every API that is going to begin a job should do that before fetching
data from vm->def.
(cherry picked from commit 3b56425938e2f97208d5918263efa0d6439e4ecd)
Every API that is going to begin a job should do that before fetching
data from vm->def.
(cherry picked from commit ff5f30b6bfa317f2a4c33f69289baf4e887eb048)
Conflicts:
src/qemu/qemu_driver.c - context
CVE-2013-6458
Every API that is going to begin a job should do that before fetching
data from vm->def.
(cherry picked from commit f93d2caa070f6197ab50d372d286018b0ba6bbd8)
CVE-2013-6458
Generally, every API that is going to begin a job should do that before
fetching data from vm->def. However, qemuDomainGetBlockInfo does not
know whether it will have to start a job or not before checking vm->def.
To avoid using disk alias that might have been freed while we were
waiting for a job, we use its copy. In case the disk was removed in the
meantime, we will fail with "cannot find statistics for device '...'"
error message.
(cherry picked from commit b799259583bd65c0b2f5042e6c3ff19637ade881)
Conflicts:
src/qemu/qemu_driver.c - VIR_STRDUP not backported
CVE-2013-6458
https://bugzilla.redhat.com/show_bug.cgi?id=1043069
When virDomainDetachDeviceFlags is called concurrently to
virDomainBlockStats: libvirtd may crash because qemuDomainBlockStats
finds a disk in vm->def before getting a job on a domain and uses the
disk pointer after getting the job. However, the domain in unlocked
while waiting on a job condition and thus data behind the disk pointer
may disappear. This happens when thread 1 runs
virDomainDetachDeviceFlags and enters monitor to actually remove the
disk. Then another thread starts running virDomainBlockStats, finds the
disk in vm->def, and while it's waiting on the job condition (owned by
the first thread), the first thread finishes the disk removal. When the
second thread gets the job, the memory pointed to be the disk pointer is
already gone.
That said, every API that is going to begin a job should do that before
fetching data from vm->def.
(cherry picked from commit db86da5ca2109e4006c286a09b6c75bfe10676ad)
Conflicts:
src/qemu/qemu_driver.c - context: no ACLs
While working on v1.0.5-maint (the branch in use on Fedora 19)
with the host at Fedora 20, I got a failure in virstoragetest.
I traced it to the fact that we were using qemu-img to create a
qcow2 file, but qemu-img changed from creating v2 files by
default in F19 to creating v3 files in F20. Rather than leaving
it up to qemu-img, it is better to write the test to force
testing of BOTH file formats (better code coverage and all).
This patch alone does not fix all the failures in v1.0.5-maint;
for that, we must decide to either teach the older branch to
understand v3 files, or to reject them outright as unsupported.
But for upstream, making the test less dependent on changing
qemu-img defaults is always a good thing.
* tests/virstoragetest.c (testPrepImages): Simplify creation of
raw file; check if qemu supports compat and if so use it.
Signed-off-by: Eric Blake <eblake@redhat.com>
(cherry picked from commit 974e5914522099ba4d463e24941289b785fe2096)
Conflicts:
tests/virstoragetest.c - hardcode test to v2, since this branch doesn't handle v3 correctly
If there's a migration cancelled, the bitmap of migration port should be
cleaned up too.
Signed-off-by: Zeng Junliang <zengjunliang@huawei.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
(cherry picked from commit c92ca769af2bacefdd451802d7eb1adac5e6597c)
Commit e3ef20d7 allows user to configure migration ports range via
qemu.conf. However, it forgot to update augeas definition file and
even the test data was malicious.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
(cherry picked from commit d9be5a7157515eeae99379e9544c34b34c5e5198)
Conflicts:
missing support for changing migration listen_address
src/qemu/libvirtd_qemu.aug
src/qemu/test_libvirtd_qemu.aug.in
