SetMem and SetMaxMem are hotplug only APIs, any persistent config
changes are supposed to go via XML definition. The original implementation
of these calls were incorrect and had the nasty side effect of making
a psuedo persistent change that would be lost after libvirtd restart
(I didn't know any better).
Fix these APIs to rightly reject non running domains.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The plain QEMU tree does not include 'thread_id' in the JSON
output. Thus we need to treat it as non-fatal if missing.
* src/qemu/qemu_monitor_json.c: Treat missing thread_id as non-fatal
A typo in the check for the primary IDE controller could cause
a crash on restore depending on the exact guest config.
* src/qemu/qemu_conf.c: Fix s/video/controller/ typo & slot
number typo
Current error reporting for JSON mode returns the full JSON
command string and full JSON error string. This is not very
user friendly, so this change makes the error report only
contain the basic command name, and friendly error message
description string. The full JSON data is logged instead.
* src/qemu/qemu_monitor_json.c: Always return the 'desc' field from
the JSON error message to users.
When in JSON mode, QEMU requires that 'qmp_capabilities' is run as
the first command in the monitor. This is a no-op when run in the
text mode monitor
* src/qemu/qemu_driver.c: Run capabilities negotiation when
connecting to the monitor
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
support for the 'qmp_capabilities' command, no-op in text mode.
This part adds support for qemu making a macvtap tap device available
via file descriptor passed to qemu command line. This also attempts to
tear down the macvtap device when a VM terminates. This includes support
for attachment and detachment to/from running VM.
* src/qemu/qemu_conf.[ch] src/qemu/qemu_driver.c: add support in the
QEmu driver
This part adds the helper code to setup and tear down macvtap devices
using direct communication with the device driver via netlink sockets.
The rather short messages received from the netlink layer are now
written into a dynamically allocated buffer
* src/util/macvtap.h src/util/macvtap.c: provides the new module
* po/POTFILES.in: the module contains translated strings
This part adds support to domain_conf.{c|h} for parsing the new
interface XML of type 'direct'. The parsed mode is now stored as
an int.
* src/conf/domain_conf.c src/conf/domain_conf.h: extend parsing code
* src/util/macvtap.h: empty header to not break compilation
This patch adds build support for libvirt checking for certain contents
of /usr/include/linux/if_link.h to see whether macvtap support is
compilable on that system. One can disable macvtap support in libvirt
via --without-macvtap passed to configure.
* configure.ac src/Makefile.am: new build support
* src/libvirt_macvtap.syms: list of exported symbols
* src/util/macvtap.c: empty module to not break compilation
The virRaiseError macro inside of virSecurityReportError expands to
virRaiseErrorFull and includes the __FILE__, __FUNCTION__ and __LINE__
information. But this three values are always the same for every call
to virSecurityReportError and do not reflect the actual error context.
Converting virSecurityReportError into a macro results in getting the
correct __FILE__, __FUNCTION__ and __LINE__ information.
Current PCI addresses are allocated at time of VM startup.
To make them truely persistent, it is neccessary to do this
at time of virDomainDefine/virDomainCreate. The code in
qemuStartVMDaemon still remains in order to cope with upgrades
from older libvirt releases
* src/qemu/qemu_driver.c: Rename existing qemuAssignPCIAddresses
to qemuDetectPCIAddresses. Add new qemuAssignPCIAddresses which
does auto-allocation upfront. Call qemuAssignPCIAddresses from
qemuDomainDefine and qemuDomainCreate to assign PCI addresses that
can then be persisted. Don't clear PCI addresses at shutdown if
they are intended to be persistent
The old text mode monitor prompts for a password when disks are
encrypted. This interactive approach doesn't work for JSON mode
monitor. Thus there is a new 'block_passwd' command that can be
used.
* src/qemu/qemu_driver.c: Split out code for looking up a disk
secret from findVolumeQcowPassphrase, into a new method
getVolumeQcowPassphrase. Enhance qemuInitPasswords() to also
set the disk encryption password via the monitor
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
support for the 'block_passwd' monitor command.
Since c26cb9234f, the dname
parameter has been ignored by these two functions. Use it.
* src/qemu/qemu_driver.c (qemudDomainMigratePrepareTunnel): Honor dname
parameter once again.
(qemudDomainMigratePrepare2): Likewise.
All other libvirt functions use array first and then number of elements
in that array. Let's make cpuDecode follow this rule.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The current schema is more permissive than the XML parsing code in
libvirt. Precisely, 'match' attribute is optional in schema while in
reality its use is bound to <model> element:
- <cpu> element without 'match' attribute is allowed only if <topology>
element is the only child element of <cpu>
- <cpu> element with 'match' attribute requires <model> element to be
present; <topology> and <feature> elements are optional
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
With QEMU >= 0.12 the host and guest side of disks no longer have
the same naming convention. Specifically the host side will now
get a 'drive-' prefix added to its name. The 'info blockstats'
monitor command returns the host side name, so it is neccessary
to strip this off when looking up stats since libvirt stores the
guest side name !
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Move 'drive-' prefix
string to a defined constant
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Strip
off 'drive-' prefix (if found) when looking up disk stats
Currently the timeout for reading startup output is 3 seconds. If the
host is under any sort of load, we can easily trigger this. Lets bump
it to 30 seconds.
Since the polling loop checks to see if the process has died, we shouldn't
erroneously hit this timeout if qemu bombs (only if it is stuck in some
infinite loop).
Use the ATTRIBUTE_NONNULL annotation to mark some virConnectPtr
args as mandatory non-null so the compiler can warn of mistakes
* src/conf/domain_event.h: All virConnectPtr args must be non-null
* src/qemu/qemu_conf.h: qemudBuildCommandLine and
qemudNetworkIfaceConnect() must be given non-null connection
* tests/qemuxml2argvtest.c: Provide a non-null (dummy) connection to
qemudBuildCommandLine()
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in secret_conf.{h,c} and update all callers to
match
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in interface_conf.{h,c} and update all callers to
match
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in cpu_conf.{h,c} and update all callers to
match
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in storage_conf.{h,c} and storage_encryption_conf.{h,c}
and update all callers to match
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in node_device_conf.{h,c} and update all callers to
match
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in network_conf.{h,c} and update all callers to
match
All callers now pass a NULL virConnectPtr into the USB/PCi device
iterator functions. Therefore the virConnectPtr arg can now be
removed from these functions
* src/util/hostusb.h, src/util/hostusb.c: Remove virConnectPtr
from usbDeviceFileIterate
* src/util/pci.c, src/util/pci.h: Remove virConnectPtr arg from
pciDeviceFileIterate
* src/qemu/qemu_security_dac.c, src/security/security_selinux.c: Update
to drop redundant virConnectPtr arg
The QEMU flags are commonly stored as a signed or unsigned int,
allowing only 31 flags. This limit is rather close, so to aid
future patches, change it to a 64-bit int
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c,
tests/qemuargv2xmltest.c, tests/qemuhelptest.c, tests/qemuxml2argvtest.c:
Use 'unsigned long long' for QEMU flags
The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in security_driver.{h,c} and update all callers to
match
