volDelete used to return VIR_ERR_INTERNAL_ERROR when attempting to
delete a volume which was still being allocated. It should return
VIR_ERR_OPERATION_INVALID.
* src/storage/storage_driver.c: Fix return of volDelete.
See previous patch for why this is good...
* src/xen/xen_driver.h (xenXMConfCache): Manage filename
dynamically.
* src/xen/xm_internal.c (xenXMConfigCacheAddFile)
(xenXMConfigFree, xenXMDomainDefineXML): Likewise.
POSIX allows implementations where PATH_MAX is undefined, leading
to compilation error. Not to mention that even if it is defined,
it is often wasteful in relation to the amount of data being stored.
All clients of vol->key were audited, and found not to care about
whether key is static or dynamic, except for these offenders:
* src/datatypes.h (struct _virStorageVol): Manage key dynamically.
* src/datatypes.c (virReleaseStorageVol): Free key.
(virGetStorageVol): Copy key.
In a second cleanup step this patch makes several interface functions from macvtap.c commonly available by moving them into interface.c and prefixing their names with 'iface'. Those functions taking Linux-specific structures as parameters are only visible on Linux.
ifaceRestoreMacAddress returns the return code from the ifaceSetMacAddr call and display an error message if setting the MAC address did not work. The caller is unchanged and still ignores the return code (which is ok).
In a first cleanup step, make nlComm from macvtap.c commonly available
for other code to use. Since nlComm uses Linux-specific structures as
parameters it's prototype is only visible on Linux.
Files under src/util must not depend on src/conf
Solve the macvtap problem by moving the definition
of macvtap modes from domain_conf.h into macvtap.h
* src/util/macvtap.c, src/util/macvtap.h: Add enum
for macvtap modes
* src/conf/domain_conf.c, src/conf/domain_conf.h: Remove
enum for macvtap modes
For virtio disks and interfaces, qemu allows users to enable or disable
ioeventfd feature. This means, qemu can execute domain code, while
another thread waits for I/O event. Basically, in some cases it is win,
in some loss. This feature is available via 'ioeventfd' attribute in disk
and interface <driver> element. It accepts 'on' and 'off'. Leaving this
attribute out defaults to hypervisor decision.
The following patch addresses the problem that when a PASSTHROUGH
mode DIRECT NIC connection is made the MAC address of the NIC is
not automatically set and reset to the configured VM MAC and
back again.
The attached patch fixes this problem by setting and resetting the MAC
while remembering the previous setting while the VM is running.
This also works if libvirtd is restarted while the VM is running.
the patch passes make syntax-check
Since we virEventRegisterDefaultImpl is now a public API, callers need
a way to invoke the default registered Handle and Timeout functions. We
already have general functions for these internally, so promote
them to the public API.
v2:
Actually add APIs to libvirt.h
* virDomainDefParse: There is a goto label "no_memory", which
reports OOM error, and then fallthrough label "error". This
patch changes things like following:
virReportOOMError();
goto error;
into:
goto no_memory;
Removes special case code from the generator and handle additional
methods.
The generated version of remoteDispatchDomainPinVcpu(Flags) has no
length check, but this check was useless anyway as it was applied to
data that was already deserialized from its XDR form.
Pinning to all physical cpus means resetting, hence it is preferable to
delete vcpupin setting of XML.
This patch changes qemu driver to delete vcpupin setting by invoking
virDomainVcpupinDel API when pinning the specified virtual cpu to
all host physical cpus.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
This patch add the private API (virDomainVcpupinDel).
This API can delete the vcpupin setting of a specified virtual cpu.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Implemented as setting NUMA policy between fork and exec as a hook,
using libnuma. Only support memory tuning on domain process currently.
For the nodemask out of range, will report soft warning instead of
hard error in libvirt layer. (Kernel will be silent as long as one
of set bit in the nodemask is valid on the host. E.g. For a host
has two NUMA nodes, kernel will be silent for nodemask "01010101").
So, soft warning is the only thing libvirt can do, as one might want
to specify the numa policy prior to a node that doesn't exist yet,
however, it may come as hotplug soon.
* src/conf/domain_conf.h: Introduce one new struct for representing
NUMA tuning related stuffs.
* src/conf/domain_conf.c: Parse and format numatune XML.
When building libvirt without libvirtd, we will receive the following error
message:
make[3]: Entering directory `/home/wency/rpmbuild/BUILD/libvirt-0.9.2/tools'
CC virsh-virsh.o
CC virsh-console.o
GEN virt-xml-validate
GEN virt-pki-validate
CCLD virsh
./src/.libs/libvirt.so: undefined reference to `numa_available'
./src/.libs/libvirt.so: undefined reference to `numa_max_node'
collect2: ld returned 1 exit status
The reason is that: we check numactl only when building qemu driver, and qemu
driver will not be built when bulding without libvirtd. So with_numactl's
value is check and we will not link libnuma.so.
In the other function, we call numa_available() and numa_max_node() only
when HAVE_NUMACTL is 1. We should do the same check in the function nodeGetMemoryStats().
During a savevm operation, libvirt will now use fd migration if qemu
supports it. When the AppArmor driver is enabled, AppArmorSetFDLabel()
is used but since this function simply returns '0', the dynamic AppArmor
profile is not updated and AppArmor blocks access to the save file. This
patch implements AppArmorSetFDLabel() to get the pathname of the file by
resolving the fd symlink in /proc, and then gives that pathname to
reload_profile(), which fixes 'virsh save' when AppArmor is enabled.
Reference: https://launchpad.net/bugs/795800
Most of the safezero() implementations return -1 on error,
setting errno. The safezero() impl using posix_fallocate()
though returned a positive errno value on error (due to
the unusual API contract of posix_fallocate() compared to
most syscall APIs).
* src/util/util.c: Ensure safezero() returns -1 and sets
errno on error.
* src/storage/storage_backend.c: Change safezero != 0 to
< 0 for detecting errors
If the 'mac_filter' configuration parameter is enabled, and there
is a failure to enable filtering, no error is reported back to
the caller. Also fix some bogus whitespace indentation for
hugetlbfs_mount
* src/qemu/qemu_conf.c: Add missing error reporting
Even though rpc uses 'unsigned int' for the _len parameter that
passes the length of item<length>, the public libvirt APIs all
use 'int' and filter out lengths < 0, except for virDomainSendKey.
* include/libvirt/libvirt.h.in (virDomainSendKey): All other APIs
use int for array length.
* src/libvirt.c (virDomainSendKey): Adjust.
* src/driver.h (virDrvDomainSendKey): Likewise.
* daemon/remote_generator.pl: Likewise.
Detected by autobuild.sh when cross-building for mingw.
Introduced in commits ce76e85 and af35cec.
* src/nodeinfo.c (nodeGetCPUStats, nodeGetMemoryStats): Mark
parameters as potentially unused.
The position of the struct parameter in the function signature
differs. Instead of hardcoding the handling for this add an annotation
to the .x file to define the position.
The LXC driver networking uses veth device pairs. These can
be easily hooked into the network filtering code.
* src/lxc/lxc_driver.c: Add calls to setup/teardown nwfilter
The algorithm for autoassigning vethXXX devices, was always
skipping over the starting dev index when finding a free
name for the guest device. This should only be done if the host
device was autoallocated.
* src/lxc/veth.c: Don't skip over veth indexes
Prefer bootindex=N option for -device over the old way -boot ORDER
possibly accompanied with boot=on option for -drive. This gives us full
control over which device will actually be used for booting guest OS.
Moreover, if qemu doesn't support boot=on, this is the only way to boot
of certain disks in some configurations (such as virtio disks when used
together IDE disks) without transforming domain XML to use per device
boot elements.
When an operation started by virDomainBlockPullAll completes (either with
success or with failure), raise an event to indicate the final status. This
allows an API user to avoid polling on virDomainBlockPullInfo if they would
prefer to use the event mechanism.
* daemon/remote.c: Dispatch events to client
* include/libvirt/libvirt.h.in: Define event ID and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle the new event
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for block_stream completion and emit a libvirt block pull event
* src/remote/remote_driver.c: Receive and dispatch events to application
* src/remote/remote_protocol.x: Wire protocol definition for the event
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for BLOCK_STREAM_COMPLETED event
from QEMU monitor
Signed-off-by: Adam Litke <agl@us.ibm.com>
The virDomainBlockPull* family of commands are enabled by the
'block_stream' and 'info block_stream' qemu monitor commands.
* src/qemu/qemu_driver.c src/qemu/qemu_monitor_text.[ch]: implement disk
streaming by using the stream and info stream text monitor commands
* src/qemu/qemu_monitor_json.[ch]: implement commands using the qmp monitor
Signed-off-by: Adam Litke <agl@us.ibm.com>
Acked-by: Daniel P. Berrange <berrange@redhat.com>
