The floppy drive command line is different on the q35 machine. Make sure
to test that both drives are supported and also multiple machine
versions as we generate the commandline differently.
Note that both output files show wrong command line which will be fixed
subsequently.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability was never set except for (stale) tests. Remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The field was added in qemu v0.13.0-rc0-731-g1ca4d09ae0 so all supported
qemu versions now use it.
There's a LOT of test fallout as we did not use capabilities close
enough to upstream for many of our tests.
Several tests had a 'bootindex' variant. Since they'd become redundant
they are also removed here.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Testing with the latest capabilities is possible with the x86_64 centric
implemented macro CAPS_LATEST. The new macro CAPS_ARCH_LATEST provides
the user the ability to specify the desired architecture when testing with
the latest capabilities.
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
SKIP_OSTYPE_CHECKS only hides some error reporting at this point,
so it can be foled into SKIP_VALIDATE
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We should still make an effort to fill in data, just not raise
an error if say an ostype/virttype combo disappeared from caps.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We have several cases when a VM has multiple disks in the test files so
having another one without any interesting configuration is not
necessary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the authentication and ipv6 cases into the main test file. To allow
removal of the separate testing of the secure credential passing via the
'secret' object in qemu, use the DO_TEST_CAPS_VER macro with version
2.5.0 when the secret object is not supported by qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move various different iSCSI configuration into one test file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the 'unsafe' cache test into 'disk-cache' and remove all the
individual cases for one cache mode each.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We'll aggregate testing of all cache modes in this test later on.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unify most of the tests into a common test named disk-cdrom-network by
adding multiple cdroms. The 'http' test is dropped since there can be
only 4 cdroms.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Few disk tests were testing support for pure -drive command line
generation for disks now that we assume it for all qemu versions the
cases are obsolete.
Replacements:
disk-readonly-no-device -> disk-readonly-disk
disk-floppy-tray-no-device -> disk-floppy-tray
disk-cdrom-tray-no-device -> disk-cdrom-tray
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically, we've always enabled an emulated video device every time we
see that graphics should be supported with a guest. With the appearance
of mediated devices which can support QEMU's vfio-display capability,
users might want to use such a device as the only video device.
Therefore introduce a new, effectively a 'disable', type for video
device.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since QEMU 2.12, QEMU understands a new vfio-pci device option 'display'
which can be used to turn on display capabilities on vgpu-enabled
mediated devices, IOW emulated GPU devices like QXL will no longer be
needed with vgpu-enable mdevs.
QEMU defaults to 'auto' for the 'display' attribute, which is not
foolproof, so we need to play it safe here and default to display='off'
if this attribute wasn't provided in the XML explicitly.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since 2.10 QEMU supports a new display type egl-headless which uses the
drm nodes for OpenGL rendering copying back the rendered bits back to
QEMU into a dma-buf which can be accessed by standard "display" apps
like VNC or SPICE. Although this display type can be used on its own,
for any practical use case it makes sense to pair it with either VNC or
SPICE display. The clear benefit of this display is that VNC gains
OpenGL support, which it natively doesn't have, and SPICE gains remote
OpenGL support (native OpenGL support only works locally through a UNIX
socket, i.e. listen type=socket/none).
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Add a test with QEMU 2.4.0 capabilites, as well as the latest caps.
The code paths for formatting TLS options will be altered and
2.4.0 is the newest version where QEMU_CAPS_OBJECT_TLS_CREDS_X509
is not supported.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Add output arguments generated with the latest qemu capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add multiple drives with the various configurations rather than having
multiple tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When support was adding for passing a pre-opened listener socket to UNIX
chardevs, it accidentally passed the listener socket for client mode
chardevs too with predictable amounts of fail resulting. This affects
libvirt when using QEMU >= 2.12
Expand the unit test coverage to validate that we are only doing FD
passing when operating in server mode.
https://bugzilla.redhat.com/show_bug.cgi?id=1598440
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU chardevs have a bug which makes the vhostuser backend complain
about lack of support for FD passing when validating the chardev.
While this is ultimately QEMU's responsibility to fix, libvirt needs to
avoid tickling the bug.
Simply disabling chardev FD passing just for vhostuser's chardev is
the most prudent approach, avoiding need for a QEMU version number
check.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add comma escaping for netsource. This is done here because
qemuBuildNetworkDriveStr has other external callers which
may not expect an escaped comma; however, this particular
command building path needs to perform the escaping for the
hostdev command line, so we do it now to ensure src->path
and src->host->name are covered.
Signed-off-by: Anya Harter <aharter@redhat.com>
Add comma escaping for cfg->spiceTLSx509certdir and
graphics->data.spice.rendernode.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add comma escaping for smartcard->data.cert.file[i] and
smartcard->data.cert.database.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add comma escaping for dev->data.file.path in cases
VIR_DOMAIN_CHR_TYPE_DEV and VIR_DOMAIN_CHR_TYPE_PIPE.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add test case explicitly defining a smartcard host certificates
database via the following xml:
<smartcard mode='host-certificates'>
<database>/tmp/foo</database>
</smartcard>
This case is not currently covered in the test suite.
Signed-off-by: Anya Harter <aharter@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When testing a domain XML with TPM we overwrite UNIX socket path
to mimic what qemuTPMEmulatorPrepareHost() is doing (because
*PrepareHost() functions are not called from the test). But we
are not doing it fully - we need to set the chardev's type too so
that virDomainTPMDefFree() can free the path.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
QEMU >= 2.12 provides 'sev-guest' object which is used to launch encrypted
VMs on AMD platform using SEV feature. The various inputs required to
launch SEV guest is provided through the <launch-security> tag. A typical
SEV guest launch command line looks like this:
-object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 ...\
-machine memory-encryption=sev0 \
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The default is stable per machine type so there should be no need to keep that.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1469338
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To avoid problems with test cases specifying an alias machine type which
would change once capabilities for a newer version are added strip all
alias machine types for the DO_TEST_CAPS_LATEST based tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Format probing will be dropped so remove the tests which will become
obsolete.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch extends the TPM's device XML with TPM 2.0 support. This only works
for the emulator type backend and looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator' version='2.0'/>
</tpm>
The swtpm process now has --tpm2 as an additional parameter:
system_u:system_r:svirt_t:s0:c597,c632 tss 18477 11.8 0.0 28364 3868 ? Rs 11:13 13:50 /usr/bin/swtpm socket --daemon --ctrl type=unixio,path=/var/run/libvirt/qemu/swtpm/testvm-swtpm.sock,mode=0660 --tpmstate dir=/var/lib/libvirt/swtpm/testvm/tpm2,mode=0640 --log file=/var/log/swtpm/libvirt/qemu/testvm-swtpm.log --tpm2 --pid file=/var/run/libvirt/qemu/swtpm/testvm-swtpm.pid
The version of the TPM can be changed and the state of the TPM is preserved.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds extensions to existing test cases and specific test cases
for the tpm-emulator.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function exists because of 5276ec712a. But it is
missing initial check just like virQEMUCapsInitHostCPUModel()
has.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The default NBD TLS certificate path varies based on prefix given to
configure, causing tests to fail depending on build options.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that GnuTLS is a requirement, we can drop a lot of
conditionally built code. However, not all ifdef-s can go because
we still want libvirt_setuid to build without gnutls.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The encryption was buggy and qemu actually dropped it upstream. Forbid
it for all versions since it would cause other problems too.
Problems with the old encryption include weak crypto, corruption of
images with blockjobs and a lot of usability problems.
This requires changing of the encryption type for the encrypted disk
tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Drop the 'vxhs' suffix so other network protocols using TLS can be
put into the same test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Change the disk encryption type to qcow2+luks so that the appropriate
secret objects are generated. This tests that the proper alias is used
for the passphrase secret object.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When preparing qemuCaps for test cases the following is
happening:
qemuTestParseCapabilitiesArch() is called, which calls
virQEMUCapsLoadCache() which in turn calls
virQEMUCapsInitHostCPUModel() which sets qemuCaps->kvmCPU and
qemuCaps->tcgCPU.
But then the code tries to update the capabilities:
testCompareXMLToArgv() calls testUpdateQEMUCaps() which calls
virQEMUCapsInitHostCPUModel() again overwriting previously
allocated memory. The solution is to free host cpuData in
testUpdateQEMUCaps().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
There's no point in calling testInitQEMUCaps() (which sets
info.qemuCaps) only to overwrite (and leak) it on the very next
line.
==12962== 296 (208 direct, 88 indirect) bytes in 1 blocks are definitely lost in loss record 265 of 331
==12962== at 0x4C2CF26: calloc (vg_replace_malloc.c:711)
==12962== by 0x5D28D9F: virAllocVar (viralloc.c:560)
==12962== by 0x5D96AB4: virObjectNew (virobject.c:239)
==12962== by 0x56DB7C7: virQEMUCapsNew (qemu_capabilities.c:1480)
==12962== by 0x112A5B: testInitQEMUCaps (qemuxml2argvtest.c:361)
==12962== by 0x1371C8: mymain (qemuxml2argvtest.c:2871)
==12962== by 0x13AD0B: virTestMain (testutils.c:1120)
==12962== by 0x1372FD: main (qemuxml2argvtest.c:2883)
Removing the function call renders @gic argument unused therefore
it's removed from the macro (and all its callers).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Create a new vsock endpoint by opening /dev/vhost-vsock,
set the requested CID via ioctl (or assign a free one if auto='yes'),
pass the file descriptor to QEMU and build the command line.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1149445
If the domain requests usage of the genid functionality,
then add the QEMU '-device vmgenid' to the command line
providing either the supplied or generated GUID value.
Add tests for both a generated and supplied GUID value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1534418
Just like ec982f6d92 denies hugepages for non-existent
guest NUMA nodes in case there are some nodes configured.
Unfortunately, when there are none, qemuBuildNumaArgStr() is not
called and thus we have to have check in qemuBuildMemPathStr()
too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We have to escape commas when formatting them on the command line. Add a
test case of a TLS path containing a comma.
Note that the output is wrong, this test case is to prove there's a bug.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Support OpenGL when using SDL backend via -sdl,gl=on. Add associated
tests.
NB: Usage of DO_TEST_CAPS_LATEST in qemuxml2argv doesn't work in
this case because -sdl gl is not introspectable.
Signed-off-by: Maciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Generates the QEMU command line for the vfio-ccw device.
Adds various functionality testing for vfio-ccw in libvirt:
1. Generation of QEMU command line from domain xml file
2. Generation of dump xml from domain xml file
3. Checks duplicate/invalid addresses for vfio-ccw devices.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Let us introduce the capability QEMU_CAPS_CCW for virtual-css-bridge
and replace QEMU_CAPS_VIRTIO_CCW with QEMU_CAPS_CCW in code segments
which identify support for ccw devices.
The virtual-css-bridge is part of the ccw support introduced in QEMU 2.7.
The QEMU_CAPS_CCW capability is based on the existence of the QEMU type.
Let us also add the capability QEMU_CAPS_CCW to the tests which
require support for ccw devices.
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1480668
QEMU has this new feature memory-backend-file.discard-data=yes
which is a nifty optimization. Basically, when qemu is quitting
or on memory hotplug it calls munmap() and close() on the file
that is backing the memory. However, this does not mean kernel
won't stop touching that part of memory. It still might. With
this feature enabled we tell kernel: "we don't need this memory
nor data stored in it". This makes kernel drop the memory
immediately without trying to sync memory with the mapped file.
Unfortunately, this cannot be turned on by default because we
can't be sure when users really don't care about what happens to
data after qemu dies. So it has to be opt-in. As usual, there are
three places where one can configure memory attributes. This
patch adds the feature to all of them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For command line we need two things:
1) -object pr-manager-helper,id=$alias,path=$socketPath
2) -drive file.pr-manager=$alias
In -object pr-manager-helper we tell qemu which socket to connect
to, then in -drive file-pr-manager we just reference the object
the drive in question should use.
For managed PR helper the alias is always "pr-helper0" and socket
path "${vm->priv->libDir}/pr-helper0.sock".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The -no-kvm-pit-reinjection option has been deprecated since
its introduction in QEMU 1.3. See commit <1569fa1>.
Drop the capability since all the QEMUs we support allow tuning
the kvm-pit properties via -global.
Also add the QEMU_CAPS_KVM_PIT_TICK_POLICY to the clock-catchup
tests, since expecting it to succeed with QEMU that does not
have kvm-pit makes no sense.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Now that mocking NUMA information works on FreeBSD, there are
no longer any test cases that need to be restricted to Linux
only.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Alter qemuBuildTPMDevStr to format the tpm-crb on the command line
and use the enum range checking for valid model.
Add a test case for the formation of the tpm-crb QEMU device
command line. The qemuxml2argvtest changes cannot use the newer
DO_TEST_CAPS_LATEST since building of the command line involves
calling qemuBuildTPMBackendStr which attempts to open the
path to the device (e.g. /dev/tmp0).
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Even though we just introduced the rom.enabled attribute to
properly cover the use case, there might be guests out there
that use the only previously available way of disabling PCI
ROM loading by not opting in to schema validation.
To make sure such guests will keep working going forward,
introduce a test case covering the legacy workaround.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The attribute can be used to disable ROM loading completely
for a device.
This might be needed because, even when the guest is configured
such that the PCI ROM will not be loaded in the PCI BAR, some
hypervisors (eg. QEMU) might still make it available to the
guest in a form (eg. fw_cfg) that some firmwares (eg. SeaBIOS)
will consume, thus not achieving the desired result.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1425058
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Prepare the tests for adding the new parameter. The parameter was
introduced in qemu-2.7.0, so add a forked version of the test case to
see that it is formatted properly.
This test is also an example how the new testing macros should be used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Allow testing of XML->argv conversion with using a real capability map
as used in the qemucapabilitiestest. This allows specifying the required
qemu version with the test rather than having to enumerate all the
required capabilities or allows to use the newest capabilities present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
To allow having more than one output file in the qemuxml2argvtest add a
suffix member to the testInfo struct which will allow testing the same
XML file with multiple capabilities files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
If QEMU uses a seccomp blacklist (since 2.11), -sandbox on
no longer tries to whitelist all the calls, but uses sets
of blacklists:
default (always blacklisted with -sandbox on)
obsolete (defaults to deny)
elevateprivileges (setuid & co, default: allow)
spawn (fork & execve, default: allow)
resourcecontrol (setaffinity, setscheduler, default: allow)
If these are supported, default to sandbox with all four
categories blacklisted.
https://bugzilla.redhat.com/show_bug.cgi?id=1492597
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Implied by QEMU >= 1.2.0.
Delete the negative test cases now that they always pass.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Due to conditional execution of virTestRun(), the testCounter was incremented
only if all the cases were run. When using VIR_TEST_RANGE=x-y, first x/2 of the
increments were skipped and that made figuring out a precise case a PITA.
Moving the condition into the test function makes it way nicer to find out the
test numbers to use in VIR_TEST_RANGE.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Implied by QEMU >= 1.2.0.
Also delete the now redundant disk-drive-copy-on-read test.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The (now assumed) QEMU_CAPS_CHARDEV_SPICEVMC is preferred.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Last use was removed by commit 0586cf98 deprecating
QEMU_CAPS_DEVICE.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Implied by QEMU >= 1.2.0.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixed-up-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We require QEMU >= 1.5.0, assume every QEMU supports it.
Sadly that does not let us trivially drop qemuMonitor's
priv->monJSON bool, because of qemuDomainQemuAttach.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This makes qemuDomainSupportsNetdev identical to
qemuDomainSupportsNicdev and leaves some code in
qemuDomainAttachNetDevice to be cleaned up later.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Up until now we have only formatted non-default GIC versions on
the command line, in order to maintain compatibility with older
QEMU versions that didn't implement the gic-version option to
begin with; however, doing so is entirely unnecessary for newer
QEMU versions, where the option is available. Moreover, having
the GIC version formatted on the command line at all times
ensures that QEMU changing its own defaults doesn't affect the
ABI of libvirt guests.
A few test cases are removed to avoid extra churn. It doesn't
matter for coverage, as those scenarios are already covered by
other parts of the test suite.
This patch is better viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We test the same XML for a type='kvm' domain twice, once with
QEMU_CAPS_KVM (expecting success), once without (expecting failure).
The failure case relies on QEMU_CAPS_MACHINE_OPT not being set,
failing in qemuBuildObsoleteAccelArg.
Checking a domain-type error message in a cpu test is strange.
Delete the negative test to allow assuming QEMU_CAPS_MACHINE_OPT by
default.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Use QEMU_CAPS_MACHINE_OPT and QEMU_CAPS_MACHINE_VMPORT_OPT
since it specifies <vmport state=off/>.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Now that support for the pcie-to-pci-bridge controller has
been implemented, adding the QEMU_CAPS_DEVICE_PCIE_PCI_BRIDGE
capability to the existing test is enough to cause the guest
to use pcie-to-pci-bridge instead of dmi-to-pci-bridge.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This test shows what happens when you add a traditional PCI
device such as pci-serial to a pure PCIe machine type such
as aarch64/virt.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add a new kind of XML output test for the files in qemuxml2argvtest
where we can validate setup and defaults applied when starting up the
VM.
This is achieved by formatting of the definition processed by the
qemuxml2argvtest into a XML and it's compared against files in
qemuxml2startupxmloutdata. This test is automatically executed if the
output file is present and it's skipped otherwise.
The first example test case is created from 'disk-drive-shared' test
case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This format is used by the storage driver and other hypervisors but qemu
does not have notion of the 'iso' format and libvirt does not translate
it to anything useful, so it would not work anyways. Users should use
'raw' instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This is a storage driver type, which is not handled in qemu driver
properly. For accessing directories, disk type 'dir' is used instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
QEMU on S390 (since v2.11) can support virtio input ccw devices.
So build the qemu command line for ccw devices.
Also add test cases for virtio-{keyboard, mouse, tablet}-ccw.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
QEMU on S390 (since v2.11) can support the virtio-gpu-ccw device,
which can be used as a video device.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1558317
Similarly to b133fac356 we need to look up alias of CCID
controller when constructing smartcard command line instead of
relying on broken assumption it will always be 'ccid0'. After
user aliases it can be anything.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We're going to use the same test case to exercise all optional
pSeries features, so a more generic name is needed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1552127
When building command line for USB controllers we have to do more
than just put controller's alias onto the command line. QEMU has
concept of these joined USB controllers. For instance ehci and
uhci controllers need to create the same USB bus. To achieve that
the slave controller needs to refer the master controller. This
worked until we've introduced user aliases because both master
and slave had the same alias. With user aliases slave can have
different alias than master. Therefore, when generating command
line for slave we need to look up the master's alias.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
It is very difficult while reading the migration code trying to
understand whether a particular function is being called on the src side
or the dst side, or either. Putting "Src" or "Dst" in the method names will
make this much more obvious. "Any" is used in a few helpers which can be
called from both sides.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Further cleanup from
commit 0c63c117a2
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Fri Feb 9 15:08:53 2018 +0000
conf: reimplement virDomainNetResolveActualType in terms of public API
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When setting up graphics, we sometimes need to resolve networks,
requiring the caller to pass in a virConnectPtr, except sometimes they
pass in NULL. Use virGetConnectNetwork() to acquire the connection to
the network driver when it is needed.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Rather than expecting callers to pass a virConnectPtr into the
virDomainDiskTranslateSourcePool() method, just acquire a connection
to the storage driver when needed.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Account for the fact that the default might change based on what
GIC versions are supported by QEMU. That's not the case at the
moment, but it will be soon.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Keep them along with other arch/machine type checks for
features instead of waiting until command line generation
time.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Currently the QEMU driver will call directly into the network driver
impl to modify resolve the atual type of NICs with type=network. It
has todo this before it has allocated the actual NIC. This introduces
a callback system to allow us to decouple the QEMU driver from the
network driver.
This is a short term step, as it ought to be possible to achieve the
same end goal by simply querying XML via the public network API. The
QEMU code in question though, has no virConnectPtr conveniently
available at this time.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 10c73bf1 fixed a bug that I had introduced back in commit
70249927 - if a vhost-scsi device had no manually assigned PCI
address, one wouldn't be assigned automatically. There was a slight
problem with the logic of the fix though - in the case of domains with
pcie-root (e.g. those with a q35 machinetype),
qemuDomainDeviceCalculatePCIConnectFlags() will attempt to determine
if the host-side PCI device is Express or legacy by examining sysfs
based on the host-side PCI address stored in
hostdev->source.subsys.u.pci.addr, but that part of the union is only
valid for PCI hostdevs, *not* for SCSI hostdevs. So we end up trying
to read sysfs for some probably-non-existent device, which fails, and
the function virPCIDeviceIsPCIExpress() returns failure (-1).
By coincidence, the return value is being examined as a boolean, and
since -1 is true, we still end up assigning the vhost-scsi device to
an Express slot, but that is just by chance (and could fail in the
case that the gibberish in the "hostside PCI address" was the address
of a real device that happened to be legacy PCI).
Since (according to Paolo Bonzini) vhost-scsi devices appear just like
virtio-scsi devices in the guest, they should follow the same rules as
virtio devices when deciding whether they should be placed in an
Express or a legacy slot. That's accomplished in this patch by
returning early with virtioFlags, rather than erroneously using
hostdev->source.subsys.u.pci.addr. It also adds a test case for PCIe
to assure it doesn't get broken in the future.
When the -machine pseries,max-cpu-compat=X is supported use
machine parameter instead of -cpu host,compat=X parameter as
that is deprecated now with qemu >= v2.10.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1519146
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1448149
If a domain has no numa nodes, that means we don't put any
memory-backend-file onto the qemu command line. That in turn
means we can't set access='shared'. Therefore, we should produce
an error instead of ignoring the setting silently.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
QEMU 2.7 and newer don't allow guests to start unless the initial
vCPUs count is a multiple of the vCPU hotplug granularity, so
validate it and report an error if needed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1283700
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Similarly to the previous commit, rename .args files.
The files were renamed using the following commands. From
qemuxml2argvdata:
for i in qemuxml2argv-*.args; do mv $i ${i#qemuxml2argv-}; done
and then (to fix broken symlinks) from qemuxml2argvdata and
qemuxml2xmloutdata:
for i in $(find . -xtype l); do \
ln -sf $(readlink $i | sed 's/qemuxml2argv-//') $i;
done
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These XMLs live in a separate directory, there's no need for them
to have a special prefix in addition. It also doesn't play nicely
with ':e' completion in Vim, finding proper file based on
qemuxml2argvtest.c is also needlessly complicated.
The files were renamed using the following commands. From
qemuxml2argvdata:
for i in qemuxml2argv-*.xml; do mv $i ${i#qemuxml2argv-}; done
and then (to fix broken symlinks) from qemuxml2argvdata and
qemuxml2xmloutdata:
for i in $(find . -xtype l); do \
ln -sf $(readlink $i | sed 's/qemuxml2argv-//') $i;
done
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In status XML, we do not store the QEMU version information, we only
format all the capabilities. We dropped QEMU_CAPS_PCI_MULTIBUS
in commit 5b783379 which was released in libvirt 3.2.0.
Therefore the only way of telling if the already running domain
at the time of daemon restart has been started with a QEMU that does
use 'pci.0' or not on PPC is to look at the pci-root controller's
alias. This is not an option if the domain has a user-specified alias
for the pci-root.
Instead of reintroducing the capability, assume 'pci.0' when we have
no version information. That way the only left broken use case would
be the combination of user aliases and very old QEMU.
Partially reverts commit 3a37af1e4.
https://bugzilla.redhat.com/show_bug.cgi?id=1518148
Even though we never format the device on the QEMU command line,
as it's a platform serial device that's not user-instantiable,
we should still make sure it's available before using it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We should make sure the isa-serial device is available before
formatting it on the QEMU command line.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Introduce specific a target types with two models for the console
devices (sclp and sclplm) used in s390 and s390x guests, so isa-serial
is no more used for them.
This makes <serial> usable on s390 and s390x guests, with at most only
a single sclpconsole and one sclplmconsole devices usable in a single
guest (due to limitations in QEMU, which will enforce already at
runtime).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1449265
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can finally introduce a specific target model for the pl011 device
used by mach-virt guests, which means isa-serial will no longer show
up to confuse users.
We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that pl011 is not
used for non-mach-virt guests and add a bunch of test cases.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=151292
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The existing implementation set the address type for all serial
devices to spapr-vio, which made it impossible to use other devices
such as usb-serial and pci-serial; moreover, some decisions were
made based on the address type rather than the device type.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1512934
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We can finally introduce a specific target model for the spapr-vty
device used by pSeries guests, which means isa-serial will no longer
show up to confuse users.
We make sure migration works in both directions by interpreting the
isa-serial target type, or the lack of target type, appropriately
when parsing the guest XML, and skipping the newly-introduced type
when formatting if for migration. We also verify that spapr-vty is
not used for non-pSeries guests and add a bunch of test cases.
This commit is best viewed with 'git show -w'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511421
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1425757
The blockdev-add code provides a mechanism to sanely provide user
and password-secret arguments for iscsi without placing them on the
command line to be viewable by a 'ps -ef' type command or needing
to create separate -iscsi devices for each disk/volume found.
So modify the iSCSI command line building to check for the presence
of the capability in order properly setup and use the domain master
secret object to encrypt the password in a secret object and alter
the parameters for the command line to utilize.
Modify the xml2argvtest to exhibit the syntax for both disk and
hostdev configurations.
Qemu has now an internal mechanism for locking images to fix specific
cases of disk corruption. This requires libvirt to mark the image as
shared so that qemu lifts certain restrictions.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1378242
Disk sharing between two VMs may corrupt the images if the format driver
does not support it. Check that the user declared use of a supported
storage format when they want to share the disk.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1511480
Since we already have such support for libxl all we need is qemu
driver adjustment. And a test case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1434451
Just like in 9324f67a57 we need to put default sata alias
(which is hardcoded to "ide", obvious, right?) onto the command
line instead of the one provided by user.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Give a better name to the capability for the sclpconsole device.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Up until now we assumed the spapr-vty device would always be
present, which is not very nice. Check for its availability before
using it instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Starting from qemu 2.11, the `-device vmcoreinfo` will create a fw_cfg
entry for a guest to store dump details, necessary to process kernel
dump with KASLR enabled and providing additional kernel details.
In essence, it is similar to -fw_cfg name=etc/vmcoreinfo,file=X but in
this case it is not backed by a file, but collected by QEMU itself.
Since the device is a singleton and shouldn't use additional hardware
resources, it is presented as a <feature> element in the libvirt
domain XML.
The device is arm/x86 only for now (targets that support fw_cfg+dma).
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1395248
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Since the virStorageEncryptionPtr encryption; is a member of
_virStorageSource it really should be allowed to be a subelement
of the disk <source> for various disk formats:
Source{File|Dir|Block|Volume}
SourceProtocol{RBD|ISCSI|NBD|Gluster|Simple|HTTP}
NB: Simple includes sheepdog, ftp, ftps, tftp
That way we can set up to allow the <encryption> element to be
formatted within the disk source, but we still need to be wary
from whence the element was read - see keep track and when it
comes to format the data, ensure it's written in the correct place.
Modify the qemuxml2argvtest to add a parse failure when there is an
<encryption> as a child of <disk> *and* an <encryption> as a child
of <source>.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine.
Since the virStorageAuthDefPtr auth; is a member of _virStorageSource
it really should be allowed to be a subelement of the disk <source>
for the RBD and iSCSI prototcols. That way we can set up to allow
the <auth> element to be formatted within the disk source.
Since we've allowed the <auth> to be a child of <disk>, we'll need
to keep track of how it was read so that when writing out we'll know
whether to format as child of <disk> or <source>. For the argv2xml
parsing, let's format under <source> as a preference. Do not allow
<auth> to be both a child of <disk> and <source>.
Modify the qemuxml2argvtest to add a parse failure when there is an
<auth> as a child of <disk> *and* an <auth> as a child of <source>.
Add tests to validate that if the <auth> was found in <source>, then
the resulting xml2xml and xml2arg works just fine. The two new .args
file are exact copies of the non "-source" version of the file.
The virschematest will read the new test files and validate from a
RNG viewpoint things are fine
Update the virstoragefile, virstoragetest, and args2xml file to show
the "preference" to place <auth> as a child of <source>.
Somewhere around commit 9ff9d9f reserving entire PCI slots was
eliminated, as demonstrated by commit 6cc2014.
Reserve the functions required by the implicit devices:
00:01.0 ISA Bridge
00:01.1 IDE Controller
00:01.2 USB Controller (unless USB is disabled)
00:01.3 Bridge
https://bugzilla.redhat.com/show_bug.cgi?id=1460143
qemu 2.7.0 introduces multiqueue virtio-blk(commit 2f27059).
This patch introduces a new attribute "queues". An example of
the XML:
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2' queues='4'/>
The corresponding QEMU command line:
-device virtio-blk-pci,scsi=off,num-queues=4,id=virtio-disk0
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The test suite has hardcoded /etc/pki/qemu as the cert dir, but this
only works if configure has --sysconfdir=/etc passed. We must set the
vxhs cert dir to a stable path in the test suite.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Alter qemu command line generation in order to possibly add TLS for
a suitably configured domain.
Sample TLS args generated by libvirt -
-object tls-creds-x509,id=objvirtio-disk0_tls0,dir=/etc/pki/qemu,\
endpoint=client,verify-peer=yes \
-drive file.driver=vxhs,file.tls-creds=objvirtio-disk0_tls0,\
file.vdisk-id=eb90327c-8302-4725-9e1b-4e85ed4dc251,\
file.server.type=tcp,file.server.host=192.168.0.1,\
file.server.port=9999,format=raw,if=none,\
id=drive-virtio-disk0,cache=none \
-device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,\
id=virtio-disk0
Update the qemuxml2argvtest with a couple of examples. One for a
simple case and the other a bit more complex where multiple VxHS disks
are added where at least one uses a VxHS that doesn't require TLS
credentials and thus sets the domain disk source attribute "tls = 'no'".
Update the hotplug to be able to handle processing the tlsAlias whether
it's to add the TLS object when hotplugging a disk or to remove the TLS
object when hot unplugging a disk. The hot plug/unplug code is largely
generic, but the addition code does make the VXHS specific checks only
because it needs to grab the correct config directory and generate the
object as the command line would do.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
If a test expects either a parse error or a failure but then there is
neither a parse error nor a failure, then properly mark the test as
failing, instead of failing later on (e.g. trying to open a
non-existing .args file).
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
The guest of usb-bus-missing does not cause a parse error, but a
validation issue -- hence, switch from DO_TEST_PARSE_ERROR to
DO_TEST_FAILURE.
Fixes commit b003b9781b.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
The VxHS block device will only use the newer formatting options and
avoid the legacy URI syntax.
An excerpt for a sample QEMU command line is:
-drive file.driver=vxhs,file.vdisk-id=eb90327c-8302-4725-9e1b-4e85ed4dc251,\
file.server.type=tcp,file.server.host=192.168.0.1,\
file.server.port=9999,format=raw,if=none,id=drive-virtio-disk0,cache=none \
-device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,\
id=virtio-disk0
Update qemuxml2argvtest with a simple test.
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1075520
Apart from generic checks, we need to constrain netmask/prefix
length a bit. Thing is, with current implementation QEMU needs to
be able to 'assign' some IP addresses to the virtual network. For
instance, the default gateway is at x.x.x.2, dns is at x.x.x.3,
the default DHCP range is x.x.x.15-x.x.x.30. Since we don't
expose these settings yet, it's safer to require shorter prefix
to have room for the defaults.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: laine@laine.org
Add a couple of tests to "validate" checks in domain_conf that either
a missing secrettype (CONFIG_UNSUPPORTED) or an mismatched secrettype
of ceph for an iSCSI disk (INTERNAL_ERROR) will cause a parsing error.
arm/aarch64 -M virt on KVM doesn't and will never work with standard
VGA card emulation. The recommended method is to use type=virtio, so
let's make it the default for video devices without an explicit type
set by the user.
https://bugzilla.redhat.com/show_bug.cgi?id=1404112
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Currently while parsing domain XML we clear the UNIX path if it matches
one of the auto-generated paths by libvirt. After that when the guest
is started new path is generated but the mode is also changed to "bind".
In the real-world use-case the mode should not change, it only happens
if a user provides a mode='connect' and path that matches one of the
auto-generated path or not provides a path at all.
Before *reconnect* feature was introduced there was no issue, but with
the new feature we need to make sure that it's used only with "connect"
mode, therefore we need to move the mode change into parsing in order
to have a proper error reported by validation code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Split one of the existing tests to ensure both configuration
errors it contained cause a failure, and introduce a new
test case.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
There's some specific logic in qemuBuildCpuCommandLine to support
auto adding -cpu qemu 32 for arch=i686 with an x86_64 qemu binary.
Add a test case for it
https://bugzilla.redhat.com/show_bug.cgi?id=1458638
This code is so complicated because we allow enabling the same
bits at many places. Just like in this case: huge pages can be
enabled by global <hugepages/> element under <memoryBacking> or
on per <memory/> basis. To complicate things a bit more, users
are allowed to omit the page size which case the default page
size is used. And this is what is causing this bug. If no page
size is specified, @pagesize is keeping value of zero throughout
whole function. Therefore we need yet another boolean to hold
[use, don't use] information as we can't sue @pagesize for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Validate that we can pass QEMU command line options using a default
namespace, instead of a prefixed namespace
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This is a preparation for following patches where we switch to
virFileCache for QEMU capabilities cache
The host arch will always remain the same but virCaps may change. Now
the host arch is stored while creating new qemu capabilities cache.
It removes the need to pass virCaps into virQEMUCapsCache*() functions.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This patch addresses the same aspects on PPC the bug 1103314 addressed
on x86.
PCI expander bus creates multiple primary PCI busses, where each of these
busses can be assigned a specific NUMA affinity, which, on x86 is
advertised through ACPI on a per-bus basis.
For SPAPR, a PHB's NUMA affinities are assigned on a per-PHB basis, and
there is no mechanism for advertising NUMA affinities to a guest on a
per-bus basis. So, even if qemu-ppc manages to get some sort of multi-bus
topology working using PXB, there is no way to expose the affinities
of these busses to the guest. It can only be exposed on a per-PHB/per-domain
basis.
So patch enables NUMA node tag in pci-root controller on PPC.
The way to set the NUMA node is through the numa_node option of
spapr-pci-host-bridge device. However for the implicit PHB, the only way
to set the numa_node is from the -global option. The -global option applies
to all the PHBs unless explicitly specified with the option on the
respective PHB of CLI. The default PHB has the emulated devices only, so
the patch prevents setting the NUMA node for the default PHB.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
When looking for slots suitable for a PCI device, libvirt
might need to add an extra PCI controller: for pSeries guests,
we want that extra controller to be a PHB (pci-root) rather
than a PCI bridge.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
PCI bus has to be numbered sequentially, and no index can be
missing, so libvirt will fill in the blanks automatically for
the user.
Up until now, it has done so using either pci-bridge, for machine
types based on legacy PCI, or pcie-root-port, for machine types
based on PCI Express. Neither choice is good for pSeries guests,
where PHBs (pci-root) should be used instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
These tests demonstrate that, while it's now possible for the
user to create PHB explicitly and manually assign devices to
them, libvirt still defaults to extending the guest PCI
topology using PCI bridges and making suboptimal device
placement choices.
The next few commits will improve on these behaviors and the
tests outputs will automatically be updated to reflect this.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Later on we're going to need access to information about IOMMU
groups for host devices. Implement the support in virpcimock,
and start using that mock library in a few QEMU test cases.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Every qemu version we support has QEMU_CAPS_CHARDEV, so stop
explicitly tracking it and blacklist it like we've done for many
other feature flags.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Several tests are intending to test some serial/console related
bits but aren't setting QEMU_CAPS_CHARDEV. This will soon be enabled
unconditionally so let's add it ahead of time.
* q35-virt-manager-basic: Intended to test a virt-manager q35 config,
which will include a serial/console device
* console-compat*: console/serial XML compat handling
* bios: Needs a serial device for sgabios CLI
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
These tests are exercising old style -serial command lines. That
code will soon be removed, so drop these tests.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
AFAIK there aren't any qemu arch/machine types with platform parallel
devices that would require old style -parallel config, so we shouldn't
ever need this nowadays.
Remove a now redundant test
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This demonstrates that the previous qemu caps changes will use
-chardev for pci-serial on aarch64 machvirt
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Check for the LOADPARM capabilility and potentially add a loadparm=x to
the "-machine" string for the QEMU command line.
Also add xml2argv test cases for loadparm.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
When added in multiple previous commits, it was used only with -device
qxl(-vga), but for some QEMUs (< 1.6) we need to add this
functionality when using -vga qxl as well.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1283207
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1214369
My fix 671d18594f was incomplete. If domain doesn't have
hugepages enabled, because of missing condition we would still be
putting hugepages path onto qemu cmd line. Clean up the
conditions so that it's more visible next time.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1214369
Consider the following XML:
<memoryBacking>
<hugepages>
<page size='2048' unit='KiB' nodeset='1'/>
</hugepages>
<source type='file'/>
<access mode='shared'/>
</memoryBacking>
<numa>
<cell id='0' cpus='0-3' memory='512000' unit='KiB'/>
<cell id='1' cpus='4-7' memory='512000' unit='KiB'/>
</numa>
The following cmd line is generated:
-object
memory-backend-file,id=ram-node0,mem-path=/var/lib/libvirt/qemu/ram,
share=yes,size=524288000 -numa node,nodeid=0,cpus=0-3,memdev=ram-node0
-object
memory-backend-file,id=ram-node1,mem-path=/var/lib/libvirt/qemu/ram,
share=yes,size=524288000 -numa node,nodeid=1,cpus=4-7,memdev=ram-node1
This is obviously wrong as for node 1 hugepages should have been
used. The hugepages configuration is more specific than <source
type='file'/>.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While checking for ABI stability, drivers might pose additional
checks that are not valid for general case. For instance, qemu
driver might check some memory backing attributes because of how
qemu works. But those attributes may work well in other drivers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add kernel_irqchip=split/on to the QEMU command line
and a capability that looks for it in query-command-line-options
output. For the 'split' option, use a version check
since it cannot be reasonably probed.
https://bugzilla.redhat.com/show_bug.cgi?id=1427005
This is a USB3 controller and it's a better choice than piix3-uhci.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Acked-by: Andrea Bolognani <abologna@redhat.com>
This patch maps /domain/cpu/cache element into -cpu parameters:
- <cache mode='passthrough'/> is translated to host-cache-info=on
- <cache level='3' mode='emulate'/> is transformed into l3-cache=on
- <cache mode='disable'/> is turned in host-cache-info=off,l3-cache=off
Any other <cache> element is forbidden.
The tricky part is detecting whether QEMU supports the CPU properties.
The 'host-cache-info' property is introduced in v2.4.0-1389-ge265e3e480,
earlier QEMU releases enabled host-cache-info by default and had no way
to disable it. If the property is present, it defaults to 'off' for any
QEMU until at least 2.9.0.
The 'l3-cache' property was introduced later by v2.7.0-200-g14c985cffa.
Earlier versions worked as if l3-cache=off was passed. For any QEMU
until at least 2.9.0 l3-cache is 'off' by default.
QEMU 2.9.0 was the first release which supports probing both properties
by running device-list-properties with typename=host-x86_64-cpu. Older
QEMU releases did not support device-list-properties command for CPU
devices. Thus we can't really rely on probing them and we can just use
query-cpu-model-expansion QMP command as a witness.
Because the cache property probing is only reliable for QEMU >= 2.9.0
when both are already supported for quite a few releases, we let QEMU
report an error if a specific cache mode is explicitly requested. The
other mode (or both if a user requested CPU cache to be disabled) is
explicitly turned off for QEMU >= 2.9.0 to avoid any surprises in case
the QEMU defaults change. Any older QEMU already turns them off so not
doing so explicitly does not make any harm.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This removes the hacky extern global variable and modifies the
test code to properly create QEMU capabilities cache for QEMU
binaries used in our tests.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Now that the NO_ACPI and NO_HPET capabilities are set
automatically by virQEMUCapsInitQMPBasicArch() if
appropriate for the architecture, they shouldn't be
used manually to avoid masking bugs.
The capabilities used in test cases should match those used
during normal operation for the tests to make any sense.
This results in the generated command line for a few test
cases (most notably non-x86 test cases that were wrongly
assuming they could use -no-acpi) changing.
QEMU allows for TSC frequency to be explicitly set to enable migration
with invtsc (migration fails if the destination QEMU cannot set the
exact same frequency used when starting the domain on the source host).
Libvirt already supports setting the TSC frequency in the XML using
<clock>
<timer name='tsc' frequency='1234567890'/>
</clock>
which will be transformed into
-cpu Model,tsc-frequency=1234567890
QEMU command line.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We want pcie-root-ports to be used when available in QEMU,
but at the same time we need to ensure that hosts running
older QEMU releases keep working and that the user can
override the default at any time.
Add a comment for the original pcie-root-port test cases
to make it clear how these new test cases are different.
For NVDIMM devices it is optionally possible to specify the size
of internal storage for namespaces. Namespaces are a feature that
allows users to partition the NVDIMM for different uses.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So, majority of the code is just ready as-is. Well, with one
slight change: differentiate between dimm and nvdimm in places
like device alias generation, generating the command line and so
on.
Speaking of the command line, we also need to append 'nvdimm=on'
to the '-machine' argument so that the nvdimm feature is
advertised in the ACPI tables properly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
One of the main reasons for introducing host-model CPU definition in a
domain capabilities XML was the inability to express disabled features
in a host capabilities XML. That is, when a host CPU is, e.g., Haswell
without x2apic support, host capabilities XML will have to report it as
Westmere + a bunch of additional features., but we really want to use
Haswell - x2apic when creating a host-model CPU.
Unfortunately, I somehow forgot to do the last step and the code would
just copy the CPU definition found in the host capabilities XML. This
changed recently for new QEMU versions which allow us to query host CPU,
but any slightly older QEMU will not benefit from any change I did. This
patch makes sure the right CPU model is filled in the domain
capabilities even with old QEMU.
The issue was reported in
https://bugzilla.redhat.com/show_bug.cgi?id=1426456
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This is a very historic artefact. Back in the old days of
830ba76c3e when we had macros to add arguments onto qemu command
line (!) we thought it was a good idea to let qemu write out the
PID file. So we passed -pidfile $stateDir/$domName onto the
command line. Thus, in order for tests to work we needed stable
stateDir in the qemu driver. Unfortunately, after 16efa11aa6
where stateDir is mkdtemp()-d, this approach lead to a leak of
temp dir.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Querying "host" CPU model expansion only makes sense for KVM. QEMU 2.9.0
introduces a new "max" CPU model which can be used to ask QEMU what the
best CPU it can provide to a TCG domain is.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
While reviewing a patch from Andrea that modified this test case, I
realized that although it was "properly failing" (it's a negative
test), that it was failing for the wrong reason (the MULTIFUNCTION cap
wasn't set in the test case, so it was saying that multifunction=on
wasn't supported by the QEMU binary; instead it should have been
complaining that it had run out of PCI slots of the appropriate type
and couldn't automatically add any more).
This improper failure had started when I added the patch to
automatically aggregate pcie-root-ports onto multiple functions of
each pcie-root slot, but I hadn't noticed it because the test still
failed.
This patch corrects the test case to 1) set the MULTIFUNCTION flag in
the caps, and 2) attempt to add 241 pcie-root-ports to a domain. Since
there are 30 slots available on a pcie-root (slot 0 is reserved, and
slot 31 is used by the integrated SATA controller), and a
pcie-root-port can only be placed on a function of a slot on
pcie-root, the maximum number of pcie-root-ports in any domain is 240.
virQEMUCapsHasPCIMultiBus() performs a version check on
the QEMU binary to figure out whether multiple buses are
supported, so to get the correct aliases assigned when
dealing with pSeries guests we need to spoof the version
accordingly in the test suite.
Due to the extra architecture-specific logic, it's already
necessary for users to call virQEMUCapsHasPCIMultiBus(),
so the capability itself is just a pointless distraction.
Now that QEMU_CAPS_DEVICE_PCI_BRIDGE is no longer checked
unless a pci-bridge is really part of the configuration,
and most uses of the legacy PCI controller combo have been
dropped from tests that use PCIe machine types, we can
drop the corresponding capabilities from a lot of test
cases.
Add a new attribute 'rendernode' to <gl> spice element.
Give it to QEMU if qemu supports it (queued for 2.9).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch add support for file memory backing on numa topology.
The specified access mode in memoryBacking can be overriden
by specifying token memAccess in numa cell.
Commit 815d98a started auto-adding one hub if there are more USB devices
than available USB ports.
This was a strange choice, since there might be even more devices.
Before USB address allocation was implemented in libvirt, QEMU
automatically added a new USB hub if the old one was full.
Adjust the logic to try adding as many hubs as will be needed
to plug in all the specified devices.
https://bugzilla.redhat.com/show_bug.cgi?id=1410188
Set the VIR_PCI_CONNECT_AGGREGATE_SLOT flag for pcie-root-ports so
that they will be assigned to all the functions on a slot.
Some qemu test case outputs had to be adjusted due to the
pcie-root-ports now being put on multiple functions.
If there are multiple devices assigned to the different functions of a
single PCI slot, they will not work properly if the device at function
0 doesn't have its "multi" attribute turned on, so it makes sense for
libvirt to turn it on during PCI address assignment. Setting multi
then assures that the new setting is stored in the config (so it will
be used next time the domain is started), preventing any potential
problems in the case that a future change in the configuration
eliminates the devices on all non-0 functions (multi will still be set
for function 0 even though it is the only function in use on the slot,
which has no useful purpose, but also doesn't cause any problems).
(NB: If we were to instead just decide on the setting for
multifunction at runtime, a later removal of the non-0 functions of a
slot would result in a silent change in the guest ABI for the
remaining device on function 0 (although it may seem like an
inconsequential guest ABI change, it *is* a guest ABI change to turn
off the multi bit).)
virtio-pci is the way forward for aarch64 guests: it's faster
and less alien to people coming from other architectures.
Now that guest support is finally getting there (Fedora 24,
CentOS 7.3, Ubuntu 16.04 and Debian testing all support
virtio-pci out of the box), we'd like to start using it by
default instead of virtio-mmio.
Users and applications can already opt-in by explicitly using
<address type='pci'/>
inside the relevant elements, but that's kind of cumbersome and
requires all users and management applications to adapt, which
we'd really like to avoid.
What we can do instead is use virtio-mmio only if the guest
already has at least one virtio-mmio device, and use virtio-pci
in all other situations.
That means existing virtio-mmio guests will keep using the old
addressing scheme, and new guests will automatically be created
using virtio-pci instead. Users can still override the default
in either direction.
Existing tests such as aarch64-aavmf-virtio-mmio and
aarch64-virtio-pci-default already cover all possible
scenarios, so no additions to the test suites are necessary.
Add a test case for when the QEMU_CAPS_NO_KVM_PIT capability is set.
This capability is mutually exclusive to QEMU_CAPS_KVM_PIT_TICK_POLICY
and results in the same output regardless of whether "discard" or
"delay" was specified in the guest XML for 'tickpolicy'.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Separate out the "policy=discard" into it's own specific
qemu command line.
We'll rename "kvm-pit-device" test case to be "kvm-pit-discard"
since it has the syntax we'd be using.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
By a mistake, for the VIR_DOMAIN_TIMER_TICKPOLICY_DELAY qemu
command line creation, 'discard' was used instead of 'delay'
in commit id '1569fa14'.
Test "kvm-pit-delay" is fixed accordingly to show the correct
option being generated.
Remove the (now) redundant kvm-pit-device tests. As it turns
out there is no need to specify both QEMU_CAPS_NO_KVM_PIT and
QEMU_CAPS_KVM_PIT_TICK_POLICY since they are mutually exclusive
and "kvm-pit-device" becomes just the same as "kvm-pit-delay".
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Qemu has abandoned the +/-feature syntax in favor of key=value. Some
architectures (s390) do not support +/-feature. So we update libvirt to handle
both formats.
If we detect a sufficiently new Qemu (indicated by support for qmp
query-cpu-model-expansion) we use key=value else we fall back to +/-feature.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Add tests for controller based disks to check disk address compatibility
with disk bus types.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Add in the block I/O throttling group parameter to the command line
if supported. If not supported, fail command creation.
Add the xml2argvtest for testing.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add test cases for address conflicts between disks and hostdevs that are
using drive addresses.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
QEMU 2.8.0 adds support for unavailable-features in
query-cpu-definitions reply. The unavailable-features array lists CPU
features which prevent a corresponding CPU model from being usable on
current host. It can only be used when all the unavailable features are
disabled. Empty array means the CPU model can be used without
modifications.
We can use unavailable-features for providing CPU model usability info
in domain capabilities XML:
<domainCapabilities>
...
<cpu>
<mode name='host-passthrough' supported='yes'/>
<mode name='host-model' supported='yes'>
<model fallback='allow'>Skylake-Client</model>
...
</mode>
<mode name='custom' supported='yes'>
<model usable='yes'>qemu64</model>
<model usable='yes'>qemu32</model>
<model usable='no'>phenom</model>
<model usable='yes'>pentium3</model>
<model usable='yes'>pentium2</model>
<model usable='yes'>pentium</model>
<model usable='yes'>n270</model>
<model usable='yes'>kvm64</model>
<model usable='yes'>kvm32</model>
<model usable='yes'>coreduo</model>
<model usable='yes'>core2duo</model>
<model usable='no'>athlon</model>
<model usable='yes'>Westmere</model>
<model usable='yes'>Skylake-Client</model>
...
</mode>
</cpu>
...
</domainCapabilities>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
CPU models (and especially some additional details which we will start
probing for later) differ depending on the accelerator. Thus we need to
call query-cpu-definitions in both KVM and TCG mode to get all data we
want.
Tests in tests/domaincapstest.c are temporarily switched to TCG to avoid
having to squash even more stuff into this single patch. They will all
be switched back later in separate commits.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We have couple of functions that operate over NULL terminated
lits of strings. However, our naming sucks:
virStringJoin
virStringFreeList
virStringFreeListCount
virStringArrayHasString
virStringGetFirstWithPrefix
We can do better:
virStringListJoin
virStringListFree
virStringListFreeCount
virStringListHasString
virStringListGetFirstWithPrefix
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
With the QEMU components in place, provide the XML parsing to
invoke that code when given the following XML snippet:
<hostdev mode='subsystem' type='scsi_host'>
<source protocol='vhost' wwpn='naa.501234567890abcd'/>
</hostdev>
An optional address element can be specified within the hostdev
(pick CCW or PCI as necessary):
<address type='ccw' cssid='0xfe' ssid='0x0' devno='0x0625'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
Add basic vhost-scsi tests which were cloned from hostdev-scsi-virtio-scsi
in both xml2argv and xml2xml. Added ones for both vhost-scsi-ccw and
vhost-scsi-pci since the syntaxes are slightly different between them.
Also adjusted the docs to describe the changes.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
For machinetypes with a pci-root bus (all legacy PCI), libvirt will
make a "fake" reservation for one extra slot prior to assigning
addresses to unaddressed PCI endpoint devices in the domain. This will
trigger auto-adding of a pci-bridge for the final device to be
assigned an address *if that device would have otherwise instead been
the last device on the last available pci-bridge*; thus it assures
that there will always be at least one slot left open in the domain's
bus topology for expansion (which is important both for hotplug (since
a new pci-bridge can't be added while the guest is running) as well as
for offline additions to the config (since adding a new device might
otherwise in some cases require re-addressing existing devices, which
we want to avoid)).
It's important to note that for the above case (legacy PCI), we must
check for the special case of all slots on all buses being occupied
*prior to assigning any addresses*, and avoid attempting to reserve
the extra address in that case, because there is no free address in
the existing topology, so no place to auto-add a pci-bridge for
expansion (i.e. it would always fail anyway). Since that condition can
only be reached by manual intervention, this is acceptable.
For machinetypes with pcie-root (Q35, aarch64 virt), libvirt's
methodology for automatically expanding the bus topology is different
- pcie-root-ports are plugged into slots (soon to be functions) of
pcie-root as needed, and the new endpoint devices are assigned to the
single slot in each pcie-root-port. This is done so that the devices
are, by default, hotpluggable (the slots of pcie-root don't support
hotplug, but the single slot of the pcie-root-port does). Since
pcie-root-ports can only be plugged into pcie-root, and we don't
auto-assign endpoint devices to the pcie-root slots, this means
topology expansion doesn't compete with endpoint devices for slots, so
we don't need to worry about checking for all "useful" slots being
free *prior* to assigning addresses to new endpoint devices - as a
matter of fact, if we attempt to reserve the open slots before the
used slots, it can lead to errors.
Instead this patch just reserves one slot for a "future potential"
PCIe device after doing the assignment for actual devices, but only
if the only PCI controller defined prior to starting address
assignment was pcie-root, and only if we auto-added at least one PCI
controller during address assignment. This assures two things:
1) that reserving the open slots will only be done when the domain is
initially defined, never at any time after, and
2) that if the user understands enough about PCI controllers that they
are adding them manually, that we don't mess up their plan by
adding extras - if they know enough to add one pcie-root-port, or
to manually assign addresses such that no pcie-root-ports are
needed, they know enough to add extra pcie-root-ports if they want
them (this could be called the "libguestfs clause", since
libguestfs needs to be able to create domains with as few
devices/controllers as possible).
This is set to reserve a single free port for now, but could be
increased in the future if public sentiment goes in that direction
(it's easy to increase later, but essentially impossible to decrease)
Real Q35 hardware has an ICH9 chip that includes several integrated
devices at particular addresses (see the file docs/q35-chipset.cfg in
the qemu source). libvirt already attempts to put the first two sets
of ich9 USB2 controllers it finds at 00:1D.* and 00:1A.* to match the
real hardware. This patch does the same for the ich9 "HD audio"
device.
The main inspiration for this patch is that currently the *only*
device in a reasonable "workstation" type virtual machine config that
requires a legacy PCI slot is the audio device, Without this patch,
the standard Q35 machine created by virt-manager will have a
dmi-to-pci-bridge and a pci-bridge just for the sound device; with the
patch (and if you change the sound device model from the default
"ich6" to "ich9"), the machine definition constructed by virt-manager
has absolutely no legacy PCI controllers - any legacy PCI devices
(e.g. video and sound) are on pcie-root as integrated devices.
Previously we added a set of EHCI+UHCI controllers to Q35 machines to
mimic real hardware as closely as possible, but recent discussions
have pointed out that the nec-usb-xhci (USB3) controller is much more
virtualization-friendly (uses less CPU), so this patch switches the
default for Q35 machinetypes to add an XHCI instead (if it's
supported, which it of course *will* be).
Since none of the existing test cases left out USB controllers in the
input XML, a new Q35 test case was added which has *no* devices, so
ends up with only the defaults always put in by qemu, plus those added
by libvirt.
Previously libvirt would only add pci-bridge devices automatically
when an address was requested for a device that required a legacy PCI
slot and none was available. This patch expands that support to
dmi-to-pci-bridge (which is needed in order to add a pci-bridge on a
machine with a pcie-root), and pcie-root-port (which is needed to add
a hotpluggable PCIe device). It does *not* automatically add
pcie-switch-upstream-ports or pcie-switch-downstream-ports (and
currently there are no plans for that).
Given the existing code to auto-add pci-bridge devices, automatically
adding pcie-root-ports is fairly straightforward. The
dmi-to-pci-bridge support is a bit tricky though, for a few reasons:
1) Although the only reason to add a dmi-to-pci-bridge is so that
there is a reasonable place to plug in a pci-bridge controller,
most of the time it's not the presence of a pci-bridge *in the
config* that triggers the requirement to add a dmi-to-pci-bridge.
Rather, it is the presence of a legacy-PCI device in the config,
which triggers auto-add of a pci-bridge, which triggers auto-add of
a dmi-to-pci-bridge (this is handled in
virDomainPCIAddressSetGrow() - if there's a request to add a
pci-bridge we'll check if there is a suitable bus to plug it into;
if not, we first add a dmi-to-pci-bridge).
2) Once there is already a single dmi-to-pci-bridge on the system,
there won't be a need for any more, even if it's full, as long as
there is a pci-bridge with an open slot - you can also plug
pci-bridges into existing pci-bridges. So we have to make sure we
don't add a dmi-to-pci-bridge unless there aren't any
dmi-to-pci-bridges *or* any pci-bridges.
3) Although it is strongly discouraged, it is legal for a pci-bridge
to be directly plugged into pcie-root, and we don't want to
auto-add a dmi-to-pci-bridge if there is already a pci-bridge
that's been forced directly into pcie-root.
Although libvirt will now automatically create a dmi-to-pci-bridge
when it's needed, the code still remains for now that forces a
dmi-to-pci-bridge on all domains with pcie-root (in
qemuDomainDefAddDefaultDevices()). That will be removed in a future
patch.
For now, the pcie-root-ports are added one to a slot, which is a bit
wasteful and means it will fail after 31 total PCIe devices (30 if
there are also some PCI devices), but helps keep the changeset down
for this patch. A future patch will have 8 pcie-root-ports sharing the
functions on a single slot.
The nec-usb-xhci device (which is a USB3 controller) has always
presented itself as a PCI device when plugged into a legacy PCI slot,
and a PCIe device when plugged into a PCIe slot, but libvirt has
always auto-assigned it to a legacy PCI slot.
This patch changes that behavior to auto-assign to a PCIe slot on
systems that have pcie-root (e.g. Q35 and aarch64/virt).
Since we don't yet auto-create pcie-*-port controllers on demand, this
means a config with an nec-xhci USB controller that has no PCI address
assigned will also need to have an otherwise-unused pcie-*-port
controller specified:
<controller type='pci' model='pcie-root-port'/>
<controller type='usb' model='nec-xhci'/>
(this assumes there is an otherwise-unused slot on pcie-root to accept
the pcie-root-port)
libvirt previously assigned nearly all devices to a "hotpluggable"
legacy PCI slot even on machines with a PCIe root bus (and even though
most such machines don't even support hotplug on legacy PCI slots!)
Forcing all devices onto legacy PCI slots means that the domain will
need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a
pci-bridge (to provide hotpluggable legacy PCI slots which, again,
usually aren't hotpluggable anyway).
To help reduce the need for these legacy controllers, this patch tries
to assign virtio-1.0-capable devices to PCIe slots whenever possible,
by setting appropriate connectFlags in
virDomainCalculateDevicePCIConnectFlags(). Happily, when that function
was written (just a few commits ago) it was created with a
"virtioFlags" argument, set by both of its callers, which is the
proper connectFlags to set for any virtio-*-pci device - depending on
the arch/machinetype of the domain, and whether or not the qemu binary
supports virtio-1.0, that flag will have either been set to PCI or
PCIe. This patch merely enables the functionality by setting the flags
for the device to whatever is in virtioFlags if the device is a
virtio-*-pci device.
NB: the first virtio video device will be placed directly on bus 0
slot 1 rather than on a pcie-root-port due to the override for primary
video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not
to change that is a topic of discussion, but this patch doesn't change
that particular behavior.
NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root
complex) does *not* support hotplug, this means that suitable
controllers must also be in the config (i.e. either pcie-root-port, or
pcie-downstream-port). For now, libvirt doesn't add those
automatically, so if you put virtio devices in a config for a qemu
that has PCIe-capable virtio devices, you'll need to add extra
pcie-root-ports yourself. That requirement will be eliminated in a
future patch, but for now, it's simple to do this:
<controller type='pci' model='pcie-root-port'/>
<controller type='pci' model='pcie-root-port'/>
<controller type='pci' model='pcie-root-port'/>
...
Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
Simplify handling of the 'dimm' address element by allowing to specify
the slot number only. This will allow libvirt to allocate slot numbers
before starting qemu.
Propagate the selected or default level to qemu if it's supported.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1376009
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
QEMU added support for ivshmem-plain and ivshmem-doorbell. Those are
reworked varians of legacy ivshmem that are compatible from the guest
POV, but not from host's POV and have sane specification and handling.
Details about the newer device type can be found in qemu's commit
5400c02b90bb:
http://git.qemu.org/?p=qemu.git;a=commit;h=5400c02b90bb
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Support for virtio disks was added in commit id 'fceeeda', but not for
SCSI drives. Add the secret for the server when hotplugging a SCSI drive.
No need to make any adjustments for unplug since that's handled during
the qemuDomainDetachDiskDevice call to qemuDomainRemoveDiskDevice in
the qemuDomainDetachDeviceDiskLive switch.
Added a test to/for the command line processing to show the command line
options when adding a SCSI drive for the guest.
Add the secret object so the 'passwordid=' can be added if the command line
if there's a secret defined in/on the host for TCP chardev TLS objects.
Preparation for the secret involves adding the secinfo to the char source
device prior to command line processing. There are multiple possibilities
for TCP chardev source backend usage.
Add test for at least a serial chardev as an example.
Add in the block I/O throttling length/duration parameter to the command
line if supported. If not supported, fail command creation.
Add the xml2argvtest for testing.
Add an optional "tls='yes|no'" attribute for a TCP chardev.
For QEMU, this will allow for disabling the host config setting of the
'chardev_tls' for a domain chardev channel by setting the value to "no" or
to attempt to use a host TLS environment when setting the value to "yes"
when the host config 'chardev_tls' setting is disabled, but a TLS environment
is configured via either the host config 'chardev_tls_x509_cert_dir' or
'default_tls_x509_cert_dir'
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The code is entirely correct, but it still managed to trip me
up when I first ran into it because I did not realize right away
that VIR_PCI_CONNECT_TYPES_ENDPOINT was not a single flag, but
rather a mask including both VIR_PCI_CONNECT_TYPE_PCI_DEVICE and
VIR_PCI_CONNECT_TYPE_PCIE_DEVICE.
In order to save the next distracted traveler in PCI Address Land
some time, document this fact with a comment. Add a test case for
the behavior as well.
The idea is to have function that does some checking of the
arguments at its beginning and then have one big switch for all
the interface types it supports. Each one of them generating the
corresponding part of the command line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The idea is to have function that does some checking of the
arguments at its beginning and then have one big switch for all
the interface types it supports. Each one of them generating the
corresponding part of the command line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This improves commit 706b5b6277 in a way that we check qemu capabilities
instead of what architecture we are running on to detect whether we can
use *virtio-vga* model or not. This is not a case only for arm/aarch64.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Before this patch we've checked qemu capabilities for video devices
only while constructing qemu command line using "-device" option.
Since we support qemu only if "-device" option is present we can use
the same capabilities to check also video devices while using "-vga"
option to construct qemu command line.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We generally uses QEMU_CAPS_DEVICE_$NAME to probe for existence of some
device and QEMU_CAPS_$NAME_$PROP to probe for existence of some property
of that device.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If QEMU in question supports QMP, this capability is set if
QEMU_CAPS_DEVICE_QXL was set based on existence of "-device qxl". If
libvirt needs to parse *help*, because there is no QMP support, it
checks for existence of "-vga qxl", but it also parses output of
"-device ?" and sets QEMU_CAPS_DEVICE_QXL too.
Now that libvirt supports only QEMU that has "-device" implemented it's
safe to drop this capability and stop using it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This patch simplifies QEMU capabilities for QXL video device. QEMU
exposes this device as *qxl-vga* and *qxl* and they are both the same
device with the same set of parameters, the only difference is that
*qxl-vga* includes VGA compatibility.
Based on QEMU code they are tied together so it's safe to check only for
presence of only one of them.
This patch also removes an invalid test case "video-qxl-sec-nodevice"
where there is only *qxl-vga* device and *qxl* device is not present.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If one of QEMU_CAPS_DEVICE_QXL_VGA or QEMU_CAPS_DEVICE_QXL is set the
other one will always be set as well because both devices are tied
together in QEMU.
The change of args files is caused by the presence of capability
QEMU_CAPS_DEVICE_VIDEO_PRIMARY which means it's safe to use
"-device qxl-vga" instead of "-vga qxl", see commit (e3f2686b) and
by the fact that if QEMU_CAPS_VGA_QXL is set QEMU_CAPS_DEVICE_QXL_VGA
and QEMU_CAPS_DEVICE_QXL would be set too (since we support only qemu
with "-device" option).
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The intel-iommu device has existed since QEMU 2.2.0, but
it was only possible to create it with -device since
QEMU 2.7.0, thanks to:
commit 621d983a1f9051f4cfc3f402569b46b77d8449fc
Author: Marcel Apfelbaum <marcel@redhat.com>
Date: Mon Jun 27 18:38:34 2016 +0300
hw/iommu: enable iommu with -device
Use the standard '-device intel-iommu' to create the IOMMU device.
The legacy '-machine,iommu=on' can still be used.
The libvirt capability check & command line formatting code
is thus broken for all QEMU versions 2.2.0 -> 2.6.0 inclusive.
This fixes it to use iommu=on instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qemucapsprobe helper calls virQEMUCapsNewForBinaryInternal with
caps == NULL, causing the following crash:
Program received signal SIGSEGV, Segmentation fault.
#0 0x00007ffff788775f in virQEMUCapsInitHostCPUModel
(qemuCaps=qemuCaps@entry=0x649680, host=host@entry=0x10) at
src/qemu/qemu_capabilities.c:2969
#1 0x00007ffff7889dbf in virQEMUCapsNewForBinaryInternal
(caps=caps@entry=0x0, binary=<optimized out>,
libDir=libDir@entry=0x4033f6 "/tmp", cacheDir=cacheDir@entry=0x0,
runUid=runUid@entry=4294967295, runGid=runGid@entry=4294967295,
qmpOnly=true) at src/qemu/qemu_capabilities.c:4039
#2 0x0000000000401702 in main (argc=2, argv=0x7fffffffd968) at
tests/qemucapsprobe.c:73
Caused by v2.2.0-182-g68c7011.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We want to pass the proper opaque pointer instead of NULL to
virDomainDefParse and subsequently virDomainDefParseNode too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Host capabilities provide libvirt's view of the host CPU, but for a
useful support for host-model CPUs we really need a hypervisor's view of
the CPU. And since the view can be differ with emulator, qemu
capabilities is the best place to store the host CPU model.
This patch just copies the CPU model from host capabilities, but this
will change in the future.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Testing PPC64/AArch64 KVM domains on x86_64 host only works because we
have a lot of bugs in our code. Since this series is going to fix them,
we need to make sure the host architecture matches guest for KVM
domains.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Adding x86 CPU models into a list of supported CPUs for non-x86
architectures is not a very good idea. Each architecture we test needs
to maintain its own list of supported CPU models.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemu_command.c should deal with translating our domain definition into a
QEMU command line and nothing else.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Some parts of qemuCaps depend on guest architecture, machine type, and
possibly other things that we know only once the domain XML has been
parsed. Let's move all these updates into a dedicated function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
