Currently QEMU capabilities are initialized before the QEMU driver
sets ownership on its various directories. The upshot is that if
you change the user/group in the qemu.conf file, libvirtd will fail
to probe QEMU the first time it is run after the config change.
Moving QEMU capabilities initialization to after the chown() calls
fixes this
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This previous commit
commit 1a50ba2cb0
Author: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Date: Mon Nov 26 15:17:13 2012 +0100
qemu: Fix QMP Capabability Probing Failure
which attempted to make sure the QEMU process used for probing
ran as the right user id, caused serious performance regression
and unreliability in probing. The -daemonize switch in QEMU
guarantees that the monitor socket is present before the parent
process exits. This means libvirtd is guaranteed to be able to
connect immediately. By switching from -daemonize to the
virCommandDaemonize API libvirtd was no longer synchronized with
QEMU's startup process. The result was that the QEMU monitor
failed to open and went into its 200ms sleep loop. This happened
for all 25 binaries resulting in 5 seconds worth of sleeping
at libvirtd startup. In addition sometimes when libvirt connected,
QEMU would be partially initialized and crash causing total
failure to probe that binary.
This commit reverts the previous change, ensuring we do use the
-daemonize flag to QEMU. Startup delay is cut from 7 seconds
to 2 seconds on my machine, which is on a par with what it was
prior to the capabilities rewrite.
To deal with the fact that QEMU needs to be able to create the
pidfile, we switch pidfile location fron runDir to libDir, which
QEMU is guaranteed to be able to write to.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently, there is no reason to hold qemu driver locked
throughout whole API execution. Moreover, we can use the
new qemuDomObjFromDomain() internal API to lookup domain then.
Hosts for rbd are ceph monitor daemons. These have fixed IP addresses,
so they are often referenced by IP rather than hostname for
convenience, or to avoid relying on DNS. Using IPv4 addresses as the
host name works already, but IPv6 addresses require rbd-specific
escaping because the colon is used as an option separator in the
string passed to qemu.
Escape these colons, and enclose the IPv6 address in square brackets
so it is distinguished from the port, which is currently mandatory.
Acked-by: Osier Yang <jyang@redhat.com>
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
https://bugzilla.redhat.com/show_bug.cgi?id=876829 complains that
if a guest is put into S3 state (such as via virsh dompmsuspend)
and then an external snapshot is taken, qemu forcefully transitions
the domain to paused, but libvirt doesn't reflect that change
internally. Thus, a user has to use 'virsh suspend' to get libvirt
back in sync with qemu state, and if the user doesn't know this
trick, then the guest appears hung.
* src/qemu/qemu_driver.c (qemuDomainSnapshotCreateActiveExternal):
Track fact that qemu wakes up a suspended domain on migration.
https://bugzilla.redhat.com/show_bug.cgi?id=895882
virDomainSnapshot.getDomain() and virDomainSnapshot.getConnect()
wrappers around virDomainSnapshotGet{Domain,Connect} were not supposed
to be ever implemented. The class should contain proper domain() and
connect() accessors that fetch python objects stored internally within
the class. While domain() was already provided, connect() was missing.
This patch adds connect() method to virDomainSnapshot class and
reimplements getDomain() and getConnect() methods as aliases to domain()
and connect() for backward compatibility.
The previous fix to avoid leaking securityDriverNames forgot to
handle the case of securityDriverNames being NULL, leading to
a crash
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The autodestroy callback code has the following function
called from a hash iterator
qemuDriverCloseCallbackRun(void *payload,
const void *name,
void *opaque)
{
...
char *uuidstr = name
...
dom = closeDef->cb(data->driver, dom, data->conn);
if (dom)
virObjectUnlock(dom);
virHashRemoveEntry(data->driver->closeCallbacks, uuidstr);
}
The closeDef->cb function may well cause the current callback
to be removed, if it shuts down 'dom'. As such the use of
'uuidstr' in virHashRemoveEntry is accessing free'd memory.
We must make a copy of the uuid str before invoking the
callback to be safe.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When linuxNodeInfoCPUPopulate() method triggered use of an
uninitialize value, since it did not initialize the 'sockets'
field in the virNodeInfoPtr struct:
==30020== Conditional jump or move depends on uninitialised value(s)
==30020== at 0x5125DBD: linuxNodeInfoCPUPopulate (nodeinfo.c:513)
==30020== by 0x51261A0: nodeGetInfo (nodeinfo.c:884)
==30020== by 0x149B9B10: qemuCapsInit (qemu_capabilities.c:846)
==30020== by 0x14A11B25: qemuCreateCapabilities (qemu_driver.c:424)
==30020== by 0x14A12426: qemuStartup (qemu_driver.c:874)
==30020== by 0x512A7AF: virStateInitialize (libvirt.c:822)
==30020== by 0x40DE04: daemonRunStateInit (libvirtd.c:877)
==30020== by 0x50ADCE5: virThreadHelper (virthreadpthread.c:161)
==30020== by 0x328CA07D14: start_thread (pthread_create.c:308)
==30020== by 0x328C6F246C: clone (clone.S:114)
(happened twice)
if (socks > nodeinfo->sockets) <--- here
nodeinfo->sockets = socks;
Rather than doing this for each field, just make the caller memset
the entire struct to zero.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 87b4c10c6c added code that may call
the virCapabilitiesClearHostNUMACellCPUTopology function with
uninitialized second argument. Although the value wouldn't be used some
compilers whine about that.
Be sure to VIR_FREE(accel) and moved virDomainVideoDefFree() within no_memory
label to be consistent
Resolve resource leak in parallelsApplyIfaceParams() when the 'oldnet' is
allocated locally. Also virCommandFree(cmd) as necessary.
This patch adds data gathering to the NUMA gathering files and adds
support for outputting the data. The test driver and xend driver need to
be adapted to fill sensible data to the structure in a future patch.
This will allow storing additional topology data in the NUMA topology
definition.
This patch changes the storage type and fixes fallout of the change
across the drivers using it.
This patch also changes semantics of adding new NUMA cell information.
Until now the data were re-allocated and copied to the topology
definition. This patch changes the addition function to steal the
pointer to a pre-allocated structure to simplify the code.
The way in that memory balloon suppression was handled for S390
is flawed for a number or reasons.
1. Just preventing the default balloon to be created in the case
of VIR_ARCH_S390[X] is not sufficient. An explicit memballoon
element in the guest definition will still be honored, resulting
both in a -balloon option and the allocation of a PCI bus address,
neither being supported.
2. Prohibiting balloon for S390 altogether at a domain_conf level
is no good solution either as there's work in progress on the QEMU
side to implement a virtio-balloon device, although in
conjunction with a new machine type. Suppressing the balloon
should therefore be done at the QEMU driver level depending
on the present capabilities.
Therefore we remove the conditional suppression of the default
balloon in domain_conf.c.
Further, we are claiming the memballoon device for virtio-s390
during device address assignment to prevent it from being considered
as a PCI device.
Finally, we suppress the generation of the balloon command line option
if this is a virtio-s390 machine.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Should have been done in commit 56fd513 already, but was missed
due to oversight: qemuDomainSendKey didn't release the driver lock
in its cleanup section. This fixes an issue introduced by commit
8c5d2ba.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This patch changes the name of the @sep argument to @terminator and
clarifies it's usage. This patch also explicitly documents that
whitespace can't be used as @terminator as it is skipped multiple times
in the implementation.
https://bugzilla.redhat.com/show_bug.cgi?id=892079
One of my previous patches (f2a4e5f176) tried to fix crashing
libvirtd on domain detroy. However, we need to copy pattern from
qemuProcessHandleMonitorEOF() instead of decrementing reference
counter. The rationale for this is, if qemu process is dying due
to domain being destroyed, we obtain EOF on both the monitor and
agent sockets. However, if the exit is expected, qemuProcessStop
is called, which cleans both agent and monitor sockets up. We
want qemuAgentClose() to be called iff the EOF is not expected,
so we don't leak an FD and memory. Moreover, there could be race
with qemuProcessHandleMonitorEOF() which could have already
closed the agent socket, in which case we don't want to do
anything.
A followon to commit id: 68dceb635 - if iface->iname is NULL, then
neither virNetDevOpenvswitchRemovePort() nor virNetDevVethDelete()
should be called. Found by Coverity.
Although the nwfilter driver skips startup when running in a
session libvirtd, it did not skip reload or shutdown. This
caused errors to be reported when sending SIGHUP to libvirtd,
and caused an abort() in libdbus on shutdown due to trying
to remove a dbus filter that was never added
When building with static analysis enabled, we turn on attribute
nonnull checking. However, this caused the build to fail with:
../../src/util/virobject.c: In function 'virObjectOnceInit':
../../src/util/virobject.c:55:40: error: null argument where non-null required (argument 1) [-Werror=nonnull]
Creation of the virObject class is the one instance where the
parent class is allowed to be NULL. Making things conditional
will let us keep static analysis checking for all other .c file
callers, without breaking the build on this one exception.
* src/util/virobject.c: Define witness.
* src/util/virobject.h (virClassNew): Use it to force most callers
to pass non-null parameter.
Adds a "ram" attribute globally to the video.model element, that changes
the resulting qemu command line only if video.type == "qxl".
<video>
<model type='qxl' ram='65536' vram='65536' heads='1'/>
</video>
That attribute gets a default value of 64*1024. The schema is unchanged
for other video element types.
The resulting qemu command line change is the addition of
-global qxl-vga.ram_size=<ram>*1024
or
-global qxl.ram_size=<ram>*1024
For the main and secondary qxl devices respectively.
The default for the qxl ram bar is 64*1024 kilobytes (the same as the
default qxl vram bar size).
The Coverity static analyzer was generating many false positives for the
unary operation inside the VIR_FREE() definition as it was trying to evaluate
the else portion of the "?:" even though the if portion was (1).
Signed-off-by: Eric Blake <eblake@redhat.com>
The count of vCPUs for a domain is extracted as a usingned long variable
but is stored in a unsigned short. If the actual number was too large,
a faulty number was stored.
