The local redefinition of PED_PARTITION_PROTECTED results in the error
but is not a problem especially if the built code doesn't have the latest
definitions.
Upon successful return of virNetClientStreamEventAddCallback() the
allocated cbdata field will be freed by virNetClientStreamEventRemoveCallback()
as cbOpaque using the free function remoteStreamCallbackFree().
This avoids "Event negative_returns: A negative constant "-1" is passed as
an argument to a parameter that cannot be negative.". The called function
uses -1 to determine whether it needs to traverse all the hostdevs.
The use of switch statements inside a bounded for loop resulted in some
false positives regarding the "default:" label which cannot be reached
since each of the other case statements use the possible for loop values.
A [dead_error_begin] was added before the default label.
Commit id ebdbe25a adjusted the algorithm and the caller guarantees that
the 'params' will have a '_' in the name being searched. Add the [returned_null]
tag to the two instances.
The use of switch statements inside a bounded for loop resulted in some
false positives regarding the "default:" label which cannot be reached
since each of the other case statements use the possible for loop values.
Commit id a994ef2d1 changed the mechanism to store/update the default
security label from using disk->seclabels[0] to allocating one on the
fly. That change allocated the label, but never saved it. This patch
will save the label. The new virDomainDiskDefAddSecurityLabelDef() is
a copy of the virDomainDefAddSecurityLabelDef().
The code is not reachable as of commit id: bb85f229. Removed
virKeepAliveStop() and virObjectUnref() because 'ka' cannot be
anything but NULL at the cleanup label.
Currently, whenever somebody calls saferead() on nonblocking FD
(safewrite() is totally interchangeable for purpose of this message)
he might get wrong return value. For instance, in the first iteration
some data is read. The number of bytes read is stored into local
variable 'nread'. However, in next iterations we can get -1 from
read() with errno == EAGAIN, in which case the -1 is returned despite
fact some data has already been read. So the caller gets confused.
Bare read() should be used for nonblocking FD.
The snapshot name is used to create path to the definition save file.
When the name contains slashes the creation of the file fails. Reject
such names.
When the snapshot definition can't be saved, the
qemuDomainSnapshotCreate function succeeded without filling some of the
fields in the internal definition.
This patch removes the snapshot and returns failure if the XML file
cannot be written.
When running virDomainDestroy, we need to make sure that no other
background thread cleans up the domain while we're doing our work.
This can happen if we release the domain object while in the
middle of work, because the monitor might detect EOF in this window.
For this reason we have a 'beingDestroyed' flag to stop the monitor
from doing its normal cleanup. Unfortunately this flag was only
being used to protect qemuDomainBeginJob, and not qemuProcessKill
This left open a race condition where either libvirtd could crash,
or alternatively report bogus error messages about the domain already
having been destroyed to the caller
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Working with virTypedParameters in clients written in C is ugly and
requires all clients to duplicate the same code. This set of APIs makes
this code for manipulating with virTypedParameters integral part of
libvirt so that all clients may benefit from it.
When virStorageBackendLogicalCreateVol() creates a snapshot for a
logical volume with backingStore element, it fails with the message
below:
2013-01-17 03:10:18.869+0000: 1967: error : virCommandWait:2345 :
internal error Child process (/sbin/lvcreate --name lvm-snapshot -L 51200K
-s=/dev/lvm-pool/lvm-volume) unexpected exit status 3: /sbin/lvcreate:
invalid option -- '=' Error during parsing of command line.
This is because virCommandAddArgPair() uses '=' to connect the two
parameters, it's unsuitable for -s option of the lvcreate.
Signed-off-by: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
A build on FreeBSD failed with:
util/virportallocator.c:108: error: storage size of 'addr' isn't known
util/virportallocator.c:123: error: 'INADDR_ANY' undeclared (first use in this function)
It turns out that while POSIX allows sockaddr_in to leak in through
<arpa/inet.h> (the way Linux does it), it is not mandatory, and
conforming applications are required to get it through <netinet/in.h>.
* src/util/virportallocator.c: Include header for struct
sockaddr_in.
* tests/virportallocatortest.c: Likewise.
The fetch of 'ipdef' in networkRefreshDhcpDaemon() when the loop to fill
in ipv4def fails to find an ipv4 address with dhcp defined. The filled in
ipdef value was not used. Code was made unnecessary with commit it 2d5cd1.
The driver mutex was unlocked in qemuDomainModifyDeviceFlags before
entering qemuDomainObjBeginJobWithDriver where it will be unlocked once
more leaving it in an undefined state. The result was that two
threads were simultaneously looking up the domain hash table during
multiple parallel device attach/detach operations.
Luckily this triggered a virHashIterationError.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
When starting a VM, /var/log/messages was spammed with the following message:
xt_physdev: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore.
With each extra VM I start, the messages get amplified
exponentially. This results in longer starting times every new VM,
relative the the previously started VM. When I ran a test with
starting 100 equal VM's, the first VM started in about 2 seconds, the
100th VM took 48 seconds to start. I'm running a vanilla 3.7.1 kernel,
but I have the same issue on VM hosts with kernel 3.2.28 or 3.2.0,
running libvirt 0.9.12 and 0.9.8 respectively.
Looking into the warning, it seemed that iptables need an extra argument,
--physdev-is-bridged, in commands like:
iptables -A libvirt-out -m physdev --physdev-is-bridged --physdev-out vnet99 -g FP-vnet99
With that, the warnings in /var/log/messages are gone and running the
test again proved the 100th VM started in 3.8 seconds.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=895294
The symptom was that attempts to modify a network device using
virDomainUpdateDeviceFlags() would fail if the original device had a
<boot> element (e.g. "<boot order='1'/>"), even if the updated device
had the same <boot> element. Instead, the following error would be logged:
cannot modify network device boot index setting
It's true that it's not possible to change boot order (internally
known as bootIndex) of a live device; qemuDomainChangeNet checks for
that, but the problem was that the information it was checking was
incorrect.
Explanation:
When a complete domain is parsed, a global (to the domain) "bootMap"
is passed down to the parse for each device; the bootMap is used to
make sure that devices don't have conflicting settings for their boot
orders.
When a single device is parsed by itself (as in the case of
virDomainUpdateDeviceFlags), there is no global bootMap that would be
appropriate to send, so NULL is sent instead. However, although the
lowest level function that parses just the boot order *does* simply
skip the sanity check in that case, the next higher level
"virDomainDeviceInfoParseXML" function refuses to call down to the
lower "virDomainDeviceBootParseXML" if bootMap is NULL. So, the boot
order is never set in the "new" device object, and when it is compared
to the original (which does have a boot order), they don't match.
The fix is to patch virDomainDeviceInfoParseXML to not care about
bootMap, and just always call virDomainDeviceInfoBootParseXML whenever
there is a <boot> element. When we are only parsing a single device,
we don't care whether or not any specified boot order is consistent
with the rest of the domain; we will always do this check later (in
the current case, we do it by verifying that the net bootIndex exactly
matches the old bootIndex).
The bandwidth plug and unplug functions were assuming that an
interface's bandwidth setting was always specified directly in the
domain's <interface> definition, but that's not necessarily true - it
could have been obtained from a <portgroup> definition in the network
definition. This patch fixes those functions to use
virDomainNetGetActualBandwidth(), which gets the bandwidth pointer
from iface->data.network.actual if it exists, otherwise returns
iface->bandwidth.
Remove extraneous check for 'netdef' when dereferencing for vlan.nTags.
Prior code would already check if netdef was NULL.
Coverity complained about a path where the 'vlan' was potentially valid,
but a prior checks may not have allocated 'iface->data.network.actual',
so like other paths it needs to be allocated on the fly.
Move the copying of vlan up earlier in networkAllocateActualDevice, so
that actual.type gets properly set.
Since the first assignment to vlan is redundant except in the case of
jumping immediately to validate from the start of the function,
eliminate its initial setting at the top of the function in favor of
calling the helper function virDomainNetGetActualVlan() (which doesn't
depend on the local vlan pointer being initialized) down at validate:
Signed-off-by: Laine Stump <laine@redhat.com>
When creating the virClass object for virNetClient, we specified
virObject as the parent instead of virObjectLockable
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The QEMU driver default max port is 65535, but it then increments
this by 1 to 65536. This maps to 0 in an unsigned short :-( This
was apparently done so that for() loops could use "< max" instead
of "<= max". Remove this insanity and just make the loop do the
right thing.
that broke the build like:
CC libvirt_conf_la-domain_conf.lo
conf/domain_conf.c: In function 'virDomainVcpuPinAdd':
conf/domain_conf.c:11920:29: error: 'vpcupin' undeclared (first use in this function)
conf/domain_conf.c:11920:29: note: each undeclared identifier is reported only once for each function it appears in
make[3]: *** [libvirt_conf_la-domain_conf.lo] Error 1
Commit dfa1e1dd added functions whose definitions do not conform
to the style used in the libxl driver. Change these functions to
be consistent throughout the driver.
In commit c4bbaaf8, caps->arch was checked uninitialized, rendering the
whole check useless.
This patch moves the conditional setting of QEMU_CAPS_NO_ACPI to
qemuCapsInitQMP, and removes the no longer needed exception for S390.
It also clears the flag for all non-x86 archs instead of just S390 in
qemuCapsInitHelp.
The virDomainObj, qemuAgent, qemuMonitor, lxcMonitor classes
all require a mutex, so can be switched to use virObjectLockable
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Check status when attempting to set SO_REUSEADDR flag on outgoing connection
On failure, VIR_WARN(), but continue to connect. This code path is on the
sender side where the setting is just a hint and would only take effect if
the sender is overflowed with TCP connections. Inability to set doesn't mean
failure to establish a connection.
In virLockSpaceProtocolDispatchNew() the returned value of lockspace from
virLockDaemonFindLockSpace() is overwritten by the virLockSpaceNew() return.
Coverity complains that it's unused.
In virLockSpaceProtocolDispatchCreateLockSpace() lockspace is also overwritten
in a similar manner resulting in the same Coverity message.
After live change of cpu counts, the number of processor threads is
verified. This patch makes use of this approach to check if qemu ignored
the request for cpu hot-unplug and report an appropriate message.
A great many virObject instances require a mutex, so introduce
a convenient class for this which provides a mutex. This avoids
repeating the tedious init/destroy code
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently all classes must directly inherit from virObject.
This allows for arbitrarily deep hierarchy. There's not much
to this aside from chaining up the 'dispose' handlers from
each class & providing APIs to check types.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
libvirt lxc will fail to start when selinux is disabled.
error: Failed to start domain noroot
error: internal error guest failed to start: PATH=/bin:/sbin TERM=linux container=lxc-libvirt container_uuid=b9873916-3516-c199-8112-1592ff694a9e LIBVIRT_LXC_UUID=b9873916-3516-c199-8112-1592ff694a9e LIBVIRT_LXC_NAME=noroot /bin/sh
2013-01-09 11:04:05.384+0000: 1: info : libvirt version: 1.0.1
2013-01-09 11:04:05.384+0000: 1: error : lxcContainerMountBasicFS:546 : Failed to mkdir /sys/fs/selinux: No such file or directory
2013-01-09 11:04:05.384+0000: 7536: info : libvirt version: 1.0.1
2013-01-09 11:04:05.384+0000: 7536: error : virLXCControllerRun:1466 : error receiving signal from container: Input/output error
2013-01-09 11:04:05.404+0000: 7536: error : virCommandWait:2287 : internal error Child process (ip link del veth1) unexpected exit status 1: Cannot find device "veth1"
fix this problem by checking if selinuxfs is mounted
in host before we try to create dir /sys/fs/selinux.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Commit 509eb51 added lxc_protocol.x; but without the initial
checkin of src/lxc_protocol-structs, 'make check' would fail for
anyone with pdwtags installed:
make[3]: *** No rule to make target `lxc_protocol-structs', needed by `check-protocol'. Stop.
* src/lxc_protocol-structs: New file.
The virDomainLxcOpenNamespace method needs to open every file
in /proc/$INITPID/ns and return the open file descriptor to the
client application.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Make cpuset local to the while loop and free it once done with it each
time through the loop. Add a sa_assert() to virBitmapParse() to keep Coverity
from believing there could be a negative return and possible resource leak.
Commit-id 'afc4631b' added the regfree(reg) to free resources alloc'd
during regcomp; however, reg still needed to be VIR_FREE()'d. The call
to regfree() also didn't account for possible NULL value. Reformatted
the call to be closer to usage.
Commit c308a9ae was incomplete; it resolved the configure failure,
but not a later build failure.
* src/util/virnetdevbridge.c: Include pre-req header.
* configure.ac (AC_CHECK_HEADERS): Prefer standard in.h over
non-standard ip6.h.
Some places missed the conversion from LIBCURL_{CFLAGS,LIBS} to
CURL_{CFLAGS,LIBS}, and a part of curl check was left in
configure.ac instead of m4/virt-curl.m4 by mistake
This patch introduces support for LXC specific public APIs. In
common with what was done for QEMU, this creates a libvirt_lxc.so
library and libvirt/libvirt-lxc.h header file.
The actual APIs are
int virDomainLxcOpenNamespace(virDomainPtr domain,
int **fdlist,
unsigned int flags);
int virDomainLxcEnterNamespace(virDomainPtr domain,
unsigned int nfdlist,
int *fdlist,
unsigned int *noldfdlist,
int **oldfdlist,
unsigned int flags);
which provide a way to use the setns() system call to move the
calling process into the container's namespace. It is not
practical to write in a generically applicable manner. The
nearest that we could get to such an API would be an API which
allows to pass a command + argv to be executed inside a
container. Even if we had such a generic API, this LXC specific
API is still useful, because it allows the caller to maintain
the current process context, in particular any I/O streams they
have open.
NB the virDomainLxcEnterNamespace() API is special in that it
runs client side, so does not involve the internal driver API.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This converts the libssh2 configure check to use LIBVIRT_CHECK_PKG.
Previously it would check version 1.0 and 1.3, but this simplifies
things to just require version 1.3
