Wire the external server RDP support with QEMU.
Check the configuration, allocate a port, start the process
and set the credentials.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This will help with the following patch, which also requires config access.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Helpers to start the qemu-rdp server and set it up.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Currently, if dbus-daemon writes on errfd, it will SIGPIPE.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The following changes are going to communicate with the qemu-rdp server
through the VM D-Bus bus, keep a connection for that and further usage.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
RDP server uses port 3389 by default.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Generalize the function, broaden its potential usage.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Like VNC, allow to set credentials for RDP.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Helps avoid/debug a potential SEGV if conn is NULL, since gio will not
set the "gerror" in that case and we will crash later at:
virReportError(VIR_ERR_DBUS_SERVICE, "%s", gerror->message);
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
glib anti-pattern, since it aborts on OOM.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When compiled with -Doptimization=g
../tools/nss/libvirt_nss_macs.c:155:8: error: ‘jerr’ may be used uninitialized [-Werror=maybe-uninitialized]
155 | if (jerr == json_tokener_continue) {
| ^
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The warning is triggered when compiling with various build options, such
as -Doptimization=g.
From gcc(1) man page about -Winline:
seemingly insignificant changes in the source program can cause the warnings produced by -Winline to appear or disappear.
Such flaky behaviour is best left to the user discretion.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Introduce a new ninja target
ninja -C build regen-{PROTO}
eg
ninja -C build regen-admin_protocol
that will re-create the reference output file based on what the
current pdwtags command emits. A small change is made to squash
whitespace on enum declarations so that introducing a new longer
enum name doesn't trigger re-indent of all existing enum names.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This makes the output match what current pdwtags will emit,
modulo some whitespace changes made by the check script
before comparison.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When event handler thread is created inside of
virCHStartEventHandler() the monitor object is refed because the thread
(virCHEventHandlerLoop()) that's created in the very next step
uses it. But right after that, the monitor object is unrefed,
which is wrong because it takes away the reference which was
handed over to the thread. The monitor must be unrefed inside the
thread, when no longer needed.
And while at it, move the unref call of the domain object after
the debug print which obviously accesses the domain definition.
Signed-off-by: Kirill Shchetiniuk <kshcheti@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If starting a CH domain fails an error is reported and
virCHProcessStart() calls virCHProcessStop() to clean up any
residues. Problem is, inside of virCHProcessStop() some public
APIs might be called (e.g. virNetworkLookupByName(),
virNetworkPortLookupByUUID() and/or virNetworkPortDelete()). Per
our design, public APIs reset last error which means the useful
error reported earlier is lost.
Fix this by calling virErrorPreserveLast() + virErrorRestore()
combo inside of virCHProcessStop().
Signed-off-by: Kirill Shchetiniuk <kshcheti@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The glib adoption docs was suggesting avoidance of certain APIs that
were obsoleted by glib, during the transition period. Now that the
referenced APIs no longer exist in libvirt code, they can also be
removed from the docs.
NB, the virStringListRemoveDuplicates method remains since there is
no glib equivalent.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Most, but not all, files in scripts have execute permission. While we
don't need this in order to launch them via meson/ninja build rules,
it is nice to direct execution if they have execution permission. This
makes the practice consistent across all scripts.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If a contributor's email domain has a DMARC policy of 'p=quarantine'
or 'p=reject', mailman will apply DMARC countermeasures on all mails
sent to lists.libvirt.org rewriting the "From" header to remove the
sender's email address. e.g.
From: Your Name via <lists.libvirt.org>
If these countermeasures were not applied, affected mail would either
have gone directly to SPAM, or have been entirely rejected. Mailman3
is unable to be configured to guarantee no mangling of the mail body
so these countermeasures are unavoidable for lists.libvirt.org.
Amongst the various downsides, the From address rewriting has the
bad effect of mangling git commit author attribution.
To avoid this it is required to add two additional git config
settings:
$ git config --global format.from "Your Name <your@email.com>"
$ git config --global format.forceInBodyFrom true
Note, *both* are required, even if your ``format.from`` matches
your existing git identity, because the latter only takes effect
once the former is set.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The original implementation of the passt backend for vhost-user
interfaces erroneously forgot to parse:
<source dev='blah'/>
for interface type='vhostuser', so it wasn't being added to the passt
commandline, and also wasn't being saved to the domain config. Now we
parse it whenever the <backend> type='passt', no matter what the
interface type, and then throw an error during validation if
source/@dev was specified for interface type = 'user|vhostuser' and
backend type != 'passt'.
Fixes: 1e9054b9c79d721a55f413c2983c5370044f8f60
Resolves: https://issues.redhat.com/browse/RHEL-82539
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Also from qemuBuildGraphicsVNCCommandLine
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
No longer required since we don't require driver->privileged anymore.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
qemuCaps is obviously used.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Clarify what source and name attributes of TPM profile describe and
update the version placeholder to the libvirt version when profiles
were first supported, v10.10. Also mention that profiles with prefix
'custom:' in their name can be modified.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Firstly, let's switch from explicit virCHDriverGetConfig() +
virObjectUnref() combo to g_autoptr(virCHDriverConfig). This
leaves us with the @monitor variable which is initialized to NULL
only to be then set to the retval of virCHMonitorNew() and
returned instantly. Well, the variable is now useless and can be
dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
At the beginning of virCHProcessStop() the ref to driver config
is obtained (via virCHDriverGetConfig()), but corresponding unref
call is lacking. Use g_autoptr() to make sure the config is
unrefed always.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When the CH driver starts a domain virCHProcessSetupIOThreads()
is called eventually which in turn calls
virCHMonitorGetIOThreads(). The latter returns an array of
iothreads which is never freed leading to a memleak:
130 (104 direct, 26 indirect) bytes in 1 blocks are definitely lost in loss record 1,804 of 1,998
at 0x484CEF3: calloc (vg_replace_malloc.c:1675)
by 0x4F0E7A9: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.8000.5)
by 0xB3A9359: virCHMonitorGetIOThreads (ch_monitor.c:1183)
by 0xB3AA5BB: virCHProcessSetupIOThreads (ch_process.c:348)
by 0xB3AAC59: virCHProcessSetup (ch_process.c:480)
by 0xB3AC75A: virCHProcessStart (ch_process.c:973)
by 0xB39B7D4: chDomainCreateXML (ch_driver.c:246)
by 0x4CC9D32: virDomainCreateXML (libvirt-domain.c:188)
by 0x168F91: remoteDispatchDomainCreateXML (remote_daemon_dispatch_stubs.h:5186)
by 0x168F18: remoteDispatchDomainCreateXMLHelper (remote_daemon_dispatch_stubs.h:5167)
by 0x4B20066: virNetServerProgramDispatchCall (virnetserverprogram.c:423)
by 0x4B1FB99: virNetServerProgramDispatch (virnetserverprogram.c:299)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are some members of the virCHDomainObjPrivate struct that
are allocated at various stages of domain lifecycle but then are
never freed:
1) cgroup - allocated in virDomainCgroupSetupCgroup()
2) autoCpuset - this one is actually never allocated (and thus is
always NULL, but soon it may be used. Just free
it for now, which is a NOP anyways.
3) autoNodeset - same story as 2).
There are two more members, which shouldn't be freed:
1) driver - this is just a raw pointer to the CH driver (see
virCHDomainObjPrivateAlloc()).
2) monitor - this member is cleared in virCHProcessStop(), way
before control even gets to
virCHDomainObjPrivateFree().
452 (400 direct, 52 indirect) bytes in 1 blocks are definitely lost in loss record 1,944 of 1,998
at 0x484CEF3: calloc (vg_replace_malloc.c:1675)
by 0x4F0E7A9: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.8000.5)
by 0x49479CE: virCgroupNewFromParent (vircgroup.c:893)
by 0x49481BA: virCgroupNewDomainPartition (vircgroup.c:1068)
by 0x494915E: virCgroupNewMachineManual (vircgroup.c:1378)
by 0x49492FE: virCgroupNewMachine (vircgroup.c:1432)
by 0x4B5E3DE: virDomainCgroupInitCgroup (domain_cgroup.c:377)
by 0x4B5E9CD: virDomainCgroupSetupCgroup (domain_cgroup.c:524)
by 0xB3AC693: virCHProcessStart (ch_process.c:951)
by 0xB39B7D4: chDomainCreateXML (ch_driver.c:246)
by 0x4CC9D32: virDomainCreateXML (libvirt-domain.c:188)
by 0x168F91: remoteDispatchDomainCreateXML (remote_daemon_dispatch_stubs.h:5186)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are two places where curl_slist_append() is called but
corresponding call to curl_slist_free_all() is missing:
virCHMonitorPutNoContent() and virCHMonitorGet() which leads to
memleaks:
41 (16 direct, 25 indirect) bytes in 1 blocks are definitely lost in loss record 992 of 1,998
at 0x4845888: malloc (vg_replace_malloc.c:446)
by 0x5B2F8FE: curl_slist_append (in /usr/lib64/libcurl.so.4.8.0)
by 0xB3A7B41: virCHMonitorPutNoContent (ch_monitor.c:824)
by 0xB3A89FF: virCHMonitorBootVM (ch_monitor.c:1030)
by 0xB3AC6F1: virCHProcessStart (ch_process.c:967)
by 0xB39B7D4: chDomainCreateXML (ch_driver.c:246)
by 0x4CC9D32: virDomainCreateXML (libvirt-domain.c:188)
by 0x168F91: remoteDispatchDomainCreateXML (remote_daemon_dispatch_stubs.h:5186)
by 0x168F18: remoteDispatchDomainCreateXMLHelper (remote_daemon_dispatch_stubs.h:5167)
by 0x4B20066: virNetServerProgramDispatchCall (virnetserverprogram.c:423)
by 0x4B1FB99: virNetServerProgramDispatch (virnetserverprogram.c:299)
by 0x4B28B5E: virNetServerProcessMsg (virnetserver.c:135)
88 (16 direct, 72 indirect) bytes in 1 blocks are definitely lost in loss record 1,501 of 1,998
at 0x4845888: malloc (vg_replace_malloc.c:446)
by 0x5B2F8FE: curl_slist_append (in /usr/lib64/libcurl.so.4.8.0)
by 0xB3A7E41: virCHMonitorGet (ch_monitor.c:864)
by 0xB3A92E2: virCHMonitorGetInfo (ch_monitor.c:1157)
by 0xB3A9CEA: virCHProcessUpdateInfo (ch_process.c:142)
by 0xB3AAD36: virCHProcessSetup (ch_process.c:492)
by 0xB3AC75A: virCHProcessStart (ch_process.c:973)
by 0xB39B7D4: chDomainCreateXML (ch_driver.c:246)
by 0x4CC9D32: virDomainCreateXML (libvirt-domain.c:188)
by 0x168F91: remoteDispatchDomainCreateXML (remote_daemon_dispatch_stubs.h:5186)
by 0x168F18: remoteDispatchDomainCreateXMLHelper (remote_daemon_dispatch_stubs.h:5167)
by 0x4B20066: virNetServerProgramDispatchCall (virnetserverprogram.c:423)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The shutdown inhibitor is created in networkStateInitialize() but
corresponding call to virInhibitorFree() is missing in
networkStateCleanup() leading to a memleak:
116 (72 direct, 44 indirect) bytes in 1 blocks are definitely lost in loss record 1,769 of 1,998
at 0x484CEF3: calloc (vg_replace_malloc.c:1675)
by 0x4F0E7A9: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.8000.5)
by 0x4993B9B: virInhibitorNew (virinhibitor.c:152)
by 0x5279394: networkStateInitialize (bridge_driver.c:654)
by 0x4CC74DC: virStateInitialize (libvirt.c:665)
by 0x15B719: daemonRunStateInit (remote_daemon.c:613)
by 0x49F2B44: virThreadHelper (virthread.c:256)
by 0x5356662: start_thread (in /usr/lib64/libc.so.6)
by 0x53D7DA3: clone (in /usr/lib64/libc.so.6)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The 'transform' attribute of 'bitmaps' was added in qemu-6.0, thus
we can assume all qemus we're willing to use support it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
