Since qemuxml2argvtest is now using virnumamock, there's no need
for qemuxml2argvmock to offer reimplementation of virNuma*()
functions. Also, the comment about CLang and FreeBSD (introduced
in v4.3.0-40-g77ac204d14) is no longer true. Looks like noinline
attribute was the missing culprit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduce a mock of virNumaGetNodeOfCPU() because soon we will
need virNumaCPUSetToNodeset() to return predictable results.
Also, fill in missing symlinks in vircaps2xmldata/.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
So far, we have a function that expands given list of NUMA nodes
into list of CPUs. But soon, we are going to need the inverse -
expand list of CPUs into list of NUMA nodes. Introduce
virNumaCPUSetToNodeset() for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Technically, there's nothing libnuma specific about
virNumaNodesetToCPUset(). It just implements a generic algorithm
over virNumaGetNodeCPUs() (which is then libnuma dependant).
Nevertheless, there's no need to have this function living inside
WITH_NUMACTL block. Any error returned from virNumaGetNodeCPUs()
(including the one that !WITH_NUMACTL stub returns) is propagated
properly.
Move the function out of the block into a generic one and drop
the !WITH_NUMACTL stub.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The binary to be exec'ed by virExec() is stored in
virCommand::args[0], and is resolved to a full absolute path (stored
in a local of virExec() just prior to execve().
Since we will have another use for the full absolute path, lets make
an API to resolve/retrieve the absolute path, and cache it in
virCommand::binaryPath so we only have to do the resolution once.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This function allows you to specify a default value to return if the
property is not found rather than always setting *result to 0.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the quiet version of virPidFileAcquirePath and remove the error
reset, since there's nothing to reset anymore.
https://bugzilla.redhat.com/show_bug.cgi?id=2171973
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
For now, add the 'Full' suffix to virPidFileAcquirePath and make
virPidFileAcquirePath a 'wrapper' around it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The parameter was added for consistency with virPidFileAcquirePath.
However, all callers of virPidFileAcquire pass false.
Remove the argument.
Partially-reverts: 2250a2b5d21c3b3529727f38a99cba22f84024f7
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Inside of virSCSIHostFindByPCI() there's a loop which iterates of
entries of "/sys/class/scsi_host" directory trying to identify
all symlinks (which then point to a SCSI device, but that's not
important right now). But the way virFileIsLink() is called can
never return a truthful reply - because it's called over
dent->d_name instead of full path. Fix this by moving the
virFileIsLink() call and passing constructed path into it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanups, we're left with a couple of needless
labels, that contain nothing but a return statement. Drop those.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Inside of virSCSIHostFindByPCI() there're some variables that are
used from a while() loop exclusively. Bring their declaration
into the loop.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove some obvious uses of VIR_FREE() in favor of automatic
cleanup. This also means, that some variables affected are
brought into the inner most block, so that automatic cleanup is
effective.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In tests we need to be able to populate the cache with a deterministic
set of entries. This means we need to drop the contents of the cache
between runs to prevent spillage between test cases.
virFileCacheClear drops all entries from the hash table used for the
cache.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The aim of this helper is to manipulate the .ignore value for
given list of parameters. For instance:
virURIParamsSetIgnore(uri, false, {"mode", "socket", NULL});
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The virURIFormat() function either returns a string, or aborts
(on OOM). There's no way this function can return NULL (as of
v7.2.0-rc1~277). Therefore, it doesn't make sense to check its
retval against NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Our URI handling code (doRemoteOpen() specifically), uses case
insensitive parsing of query part of URI. For instance:
qemu:///system?socket=/some/path
qemu:///system?SoCkEt=/some/path
are the same URI. Even though the latter is probably not used
anywhere, let's switch to STRCASEEQ() instead of STREQ() at two
places: virURIGetParam() and virURICheckUnixSocket().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
virBitmapNextSetBit/virBitmapLastSetBit/virBitmapNextClearBit can be
used for iteration of a bitmap. Allow NULL bitmap so that iteration of a
bitmap can be simplified in certain cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The virBitmapIsBitSet API is a permissive one which returns false when
the bit is not set or is out of range. We can do the same if the bitmap
is NULL to aid certain situations when this can happen, but we don't
want to add extra checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Every single caller of the
virNetDevMacVLanDeleteWithVPortProfile() function is calling it
wrapped inside of ignore_value() macro. This is because the
function is annotated as G_GNUC_WARN_UNUSED_RESULT. This makes no
sense. Drop the annotation and the macro envelope.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prepare the buffer for encryption only after initializing the cipher, so
that there's just one failure point. This allows to remove the 'error'
label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The function can't fail so it's pointless to check its return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In d9ee51e, virNetDevIPCheckIPv6Forwarding was updated to walk the
contents of /proc/net/ipv6_route so that it could check to see if the
RTF_ADDRCONF was set on any IPv6 routes to ultimately determine if
enabling forwarding would result in an error due to accept_ra=1 being
set on the interface.
The implementation added in that commit limited the number of routes
that could be read from /proc/net/ipv6_route to 100_000, each with 150
characters. This is problematic for machines that have a full IPv6
routing table, as the IPv6 routing table has now grown to over 160_000
(it was closer to 100_000 at the time of that commit).
This patch increases the maximum route size from 100_000 to 1_000_000.
While a million routes is somewhat arbitrary, it's meant to be a value
that can be supported for the forseeable future. APNIC, one of the five
regional internet registries, recently published a forecast of IPv6
table growth which anticipates a worst-case growth to 1_000_000 in
January of 2029.
Signed-off-by: Brooks Swinnerton <bswinnerton@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The helper uses the user-provided auth callbacks to ask the user. The
helper encapsulates the steps we do to query the user in few places into
a common helper which can be then used further.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Fix and clean up the error paths in virAuthConfigNew*.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The VIR_NETDEV_TAP_CREATE_ALLOW_EXISTING flag is documented as:
/* The device is allowed to exist before creation */
VIR_NETDEV_TAP_CREATE_ALLOW_EXISTING = 1 << 4,
and yet, the documentation to virNetDevTapCreate() documents its
behavior when the flag is passed as:
* VIR_NETDEV_TAP_CREATE_ALLOW_EXISTING
* - The device creation fails if @ifname already exists
Fortunately, the function is implemented so that it follows the
expected behavior (i.e. the former flag documentation). Fix the
function documentation then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The cgroup v2 cpu.weight limits are different than cgroup v1 cpu.shares
limits.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Because of kernel doesn't allow passing negative values to
cpu.max as quota, it's needing to convert negative values to "max" token.
Signed-off-by: Anton Fadeev <anton.fadeev@red-soft.ru>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
These while loops exit directly due to break after entering.
Use if instead of these while loops.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since we really only need to handle key skipping in the top level object
the caller doesn't at this point even pass it to the array formatting
helper function. Remove the unused argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Skipping of a specific key is needed only for the top level object to
specially handle the object type. We must not pass it to any recursed
printing of nested objects as skipping keys there might be surprising
and also is unhandlable later when formatting the commandline.
Until now this did not pose a problem but was discovered when adding a
new netdev backend which has a nested config object which also has the
'type' key which was being skipped.
Modern usage will prefer JSON directly but fix the commandline generator
to prevent surprises.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Automatically free 'sec' and remove the 'cleanup' section and 'ret'
variables.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The initialization vector is not optional thus we also don't need to
check whether the caller passed it in. Additionally we can use c99
initializers for the gnutls_datum_t structs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'gnutls_datum_t' simply holds pointers to the encryption key and its
length. There's absolutely no point in securely erasing that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In the past, the preferred policy
(VIR_DOMAIN_NUMATUNE_MEM_PREFERRED) required exactly one (host)
NUMA node. This made sense because:
1) the libnuma API - numa_set_preferred() allowed exactly one
node, because
2) corresponding kernel syscall (__NR_set_mempolicy) accepted
exactly one node (for MPOL_PREFERRED mode).
But things have changed since then. Firstly, kernel introduced
new MPOL_PREFERRED_MANY mode (v5.15-rc1~107^2~21) which was then
exposed in libnuma as numa_set_preferred_many() (v2.0.15~24).
Fortunately, libnuma also exposes numa_has_preferred_many() which
returns whether the kernel has support for the new mode (1) or
not (0).
Putting this all together, we can lift our check for sufficiently
new kernel and libnuma.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2151064
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is available on at least FreeBSD and GLibc >= 2.25.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The BPF_CGROUP_DEVICE constant was introduced to Linux in
commit ebc614f687369f9df99828572b1d85a7c2de3d92
Author: Roman Gushchin <roman.gushchin@linux.dev>
Date: Sun Nov 5 08:15:32 2017 -0500
bpf, cgroup: implement eBPF-based device controller for cgroup v2
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The BPF_PROG_QUERY constant was introduced to Linux in
commit defd9c476fa6b01b4eb5450452bfd202138decb7
Author: Alexei Starovoitov <ast@kernel.org>
Date: Mon Oct 2 22:50:26 2017 -0700
libbpf: sync bpf.h
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The VHOST_VSOCK_SET_GUEST_CID constant was introduced to Linux in
commit 433fc58e6bf2c8bd97e57153ed28e64fd78207b8
Author: Asias He <asias@redhat.com>
Date: Thu Jul 28 15:36:34 2016 +0100
VSOCK: Introduce vhost_vsock.ko
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The linux/magic.h header has existed since
commit e18fa700c9a31360bc8f193aa543b7ef7b39a06b
Author: Jeff Garzik <jeff@garzik.org>
Date: Sun Sep 24 11:13:19 2006 -0400
Move several *_SUPER_MAGIC symbols to include/linux/magic.h.
This is old enough that all our supported platforms can be assumed
to have this header.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The DEVLINK_CMD_ESWITCH_GET constant was introduced to Linux in
commit adf200f31c000d707e4afe238ed1d1199e0cce7c
Author: Jiri Pirko <jiri@mellanox.com>
Date: Thu Feb 9 15:54:33 2017 +0100
devlink: fix the name of eswitch commands
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The GET_VLAN_VID_CMD constant has existed since before Linux moved
to git.
This is old enough that all our supported platforms can be assumed
to have this feature.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
