This flag is used in migration prepare step to send updated XML
definition of a guest.
Also ``virsh dumpxml --update-cpu [--inactive] guest'' command can be
used to see the updated CPU requirements.
This patch adds the implementation of the public API for the network
filtering (ACL) extensions to libvirt.c .
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
This patch adds extensions to libvirt's public API necessary for
controlling the new functionality from remote for example.
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
The current virDomainAttachDevice API can be (ab)used to change
the media of an existing CDROM/Floppy device. Going forward there
will be more devices that can be configured on the fly and overloading
virDomainAttachDevice for this is not too pleasant. This patch adds
a new virDomainUpdateDeviceFlags() explicitly just for modifying
existing devices.
* include/libvirt/libvirt.h.in: Add virDomainUpdateDeviceFlags
* src/driver.h: Internal API for virDomainUpdateDeviceFlags
* src/libvirt.c, src/libvirt_public.syms: Glue public API to
driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Add
stubs for new driver entry point
This introduces a new event type
VIR_DOMAIN_EVENT_ID_GRAPHICS
The same event can be emitted in 3 scenarios
typedef enum {
VIR_DOMAIN_EVENT_GRAPHICS_CONNECT = 0,
VIR_DOMAIN_EVENT_GRAPHICS_INITIALIZE,
VIR_DOMAIN_EVENT_GRAPHICS_DISCONNECT,
} virDomainEventGraphicsPhase;
Connect/disconnect are triggered at socket accept/close.
The initialize phase is immediately after the protocol
setup and authentication has completed. ie when the
client is authorized and about to start interacting with
the graphical desktop
This event comes with *a lot* of potential information
- IP address, port & address family of client
- IP address, port & address family of server
- Authentication scheme (arbitrary string)
- Authenticated subject identity. A subject may have
multiple identities with some authentication schemes.
For example, vencrypt+sasl results in a x509dname
and saslUsername identities.
This results in a very complicated callback :-(
typedef enum {
VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV4,
VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV6,
} virDomainEventGraphicsAddressType;
struct _virDomainEventGraphicsAddress {
int family;
const char *node;
const char *service;
};
typedef struct _virDomainEventGraphicsAddress virDomainEventGraphicsAddress;
typedef virDomainEventGraphicsAddress *virDomainEventGraphicsAddressPtr;
struct _virDomainEventGraphicsSubject {
int nidentity;
struct {
const char *type;
const char *name;
} *identities;
};
typedef struct _virDomainEventGraphicsSubject virDomainEventGraphicsSubject;
typedef virDomainEventGraphicsSubject *virDomainEventGraphicsSubjectPtr;
typedef void (*virConnectDomainEventGraphicsCallback)(virConnectPtr conn,
virDomainPtr dom,
int phase,
virDomainEventGraphicsAddressPtr local,
virDomainEventGraphicsAddressPtr remote,
const char *authScheme,
virDomainEventGraphicsSubjectPtr subject,
void *opaque);
The wire protocol is similarly complex
struct remote_domain_event_graphics_address {
int family;
remote_nonnull_string node;
remote_nonnull_string service;
};
const REMOTE_DOMAIN_EVENT_GRAPHICS_IDENTITY_MAX = 20;
struct remote_domain_event_graphics_identity {
remote_nonnull_string type;
remote_nonnull_string name;
};
struct remote_domain_event_graphics_msg {
remote_nonnull_domain dom;
int phase;
remote_domain_event_graphics_address local;
remote_domain_event_graphics_address remote;
remote_nonnull_string authScheme;
remote_domain_event_graphics_identity subject<REMOTE_DOMAIN_EVENT_GRAPHICS_IDENTITY_MAX>;
};
This is currently implemented in QEMU for the VNC graphics
protocol, but designed to be usable with SPICE graphics in
the future too.
* daemon/remote.c: Dispatch graphics events to client
* examples/domain-events/events-c/event-test.c: Watch for
graphics events
* include/libvirt/libvirt.h.in: Define new graphics event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle graphics events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for VNC events and emit a libvirt graphics event
* src/remote/remote_driver.c: Receive and dispatch graphics
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
graphics events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for VNC_CONNECTED,
VNC_INITIALIZED & VNC_DISCONNETED events from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_IO_ERROR
This event includes the action that is about to be taken
as a result of the watchdog triggering
typedef enum {
VIR_DOMAIN_EVENT_IO_ERROR_NONE = 0,
VIR_DOMAIN_EVENT_IO_ERROR_PAUSE,
VIR_DOMAIN_EVENT_IO_ERROR_REPORT,
} virDomainEventIOErrorAction;
In addition it has the source path of the disk that had the
error and its unique device alias. It does not include the
target device name (/dev/sda), since this would preclude
triggering IO errors from other file backed devices (eg
serial ports connected to a file)
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventIOErrorCallback)(virConnectPtr conn,
virDomainPtr dom,
const char *srcPath,
const char *devAlias,
int action,
void *opaque);
This is currently wired up to the QEMU block IO error events
* daemon/remote.c: Dispatch IO error events to client
* examples/domain-events/events-c/event-test.c: Watch for
IO error events
* include/libvirt/libvirt.h.in: Define new IO error event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle IO error events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for block IO errors and emit a libvirt IO error event
* src/remote/remote_driver.c: Receive and dispatch IO error
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
IO error events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for BLOCK_IO_ERROR event
from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_WATCHDOG
This event includes the action that is about to be taken
as a result of the watchdog triggering
typedef enum {
VIR_DOMAIN_EVENT_WATCHDOG_NONE = 0,
VIR_DOMAIN_EVENT_WATCHDOG_PAUSE,
VIR_DOMAIN_EVENT_WATCHDOG_RESET,
VIR_DOMAIN_EVENT_WATCHDOG_POWEROFF,
VIR_DOMAIN_EVENT_WATCHDOG_SHUTDOWN,
VIR_DOMAIN_EVENT_WATCHDOG_DEBUG,
} virDomainEventWatchdogAction;
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventWatchdogCallback)(virConnectPtr conn,
virDomainPtr dom,
int action,
void *opaque);
* daemon/remote.c: Dispatch watchdog events to client
* examples/domain-events/events-c/event-test.c: Watch for
watchdog events
* include/libvirt/libvirt.h.in: Define new watchdg event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle watchdog events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for watchdogs and emit a libvirt watchdog event
* src/remote/remote_driver.c: Receive and dispatch watchdog
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
watchdog events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for WATCHDOG event
from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_RTC_CHANGE
This event includes the new UTC offset measured in seconds.
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventRTCChangeCallback)(virConnectPtr conn,
virDomainPtr dom,
long long utcoffset,
void *opaque);
If the guest XML configuration for the <clock> is set to
offset='variable', then the XML will automatically be
updated with the new UTC offset value. This ensures that
during migration/save/restore the new offset is preserved.
* daemon/remote.c: Dispatch RTC change events to client
* examples/domain-events/events-c/event-test.c: Watch for
RTC change events
* include/libvirt/libvirt.h.in: Define new RTC change event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle RTC change events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for RTC changes and emit a libvirt RTC change event
* src/remote/remote_driver.c: Receive and dispatch RTC change
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
RTC change events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for RTC_CHANGE event
from QEMU monitor
The reboot event is not a normal lifecycle event, since the
virtual machine on the host does not change state. Rather the
guest OS is resetting the virtual CPUs. ie, the QEMU process
does not restart. Thus, this does not belong in the current
lifecycle events callback.
This introduces a new event type
VIR_DOMAIN_EVENT_ID_REBOOT
It takes no parameters, besides the virDomainPtr, so it can
use the generic callback signature.
* daemon/remote.c: Dispatch reboot events to client
* examples/domain-events/events-c/event-test.c: Watch for
reboot events
* include/libvirt/libvirt.h.in: Define new reboot event ID
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle reboot events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for reboots and emit a libvirt reboot event
* src/remote/remote_driver.c: Receive and dispatch reboot
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
reboot events
The current API for domain events has a number of problems
- Only allows for domain lifecycle change events
- Does not allow the same callback to be registered multiple times
- Does not allow filtering of events to a specific domain
This introduces a new more general purpose domain events API
typedef enum {
VIR_DOMAIN_EVENT_ID_LIFECYCLE = 0, /* virConnectDomainEventCallback */
...more events later..
}
int virConnectDomainEventRegisterAny(virConnectPtr conn,
virDomainPtr dom, /* Optional, to filter */
int eventID,
virConnectDomainEventGenericCallback cb,
void *opaque,
virFreeCallback freecb);
int virConnectDomainEventDeregisterAny(virConnectPtr conn,
int callbackID);
Since different event types can received different data in the callback,
the API is defined with a generic callback. Specific events will each
have a custom signature for their callback. Thus when registering an
event it is neccessary to cast the callback to the generic signature
eg
int myDomainEventCallback(virConnectPtr conn,
virDomainPtr dom,
int event,
int detail,
void *opaque)
{
...
}
virConnectDomainEventRegisterAny(conn, NULL,
VIR_DOMAIN_EVENT_ID_LIFECYCLE,
VIR_DOMAIN_EVENT_CALLBACK(myDomainEventCallback)
NULL, NULL);
The VIR_DOMAIN_EVENT_CALLBACK() macro simply does a "bad" cast
to the generic signature
* include/libvirt/libvirt.h.in: Define new APIs for registering
domain events
* src/driver.h: Internal driver entry points for new events APIs
* src/libvirt.c: Wire up public API to driver API for events APIs
* src/libvirt_public.syms: Export new APIs
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c,
src/xenapi/xenapi_driver.c: Stub out new API entries
The new virDomainAbortJob() method provides a way for a second
thread to abort an ongoing job run by another thread. This
extends to any API with which the virDomainGetJobInfo() API
is intended to work. Cancellation is not guarenteed, rather best
effort on part of the hypervisor and not required to be implmented.
* include/libvirt/libvirt.h.in: Define virDomainAbortJob()
Introduce a new public API that provides a way to get progress
info on currently running jobs on a virDomainpPtr. APIs that
are initially within scope of this idea are
virDomainMigrate
virDomainMigrateToURI
virDomainSave
virDomainRestore
virDomainCoreDump
These all take a potentially long time and benefit from monitoring.
The virDomainJobInfo struct allows for various pieces of information
to be reported
- Percentage completion
- Time
- Overall data
- Guest memory data
- Guest disk/file data
* include/libvirt/libvirt.h.in: Add virDomainGetJobInfo
* python/generator.py, python/libvirt-override-api.xml,
python/libvirt-override.c: Override for virDomainGetJobInfo API
* python/typewrappers.c, python/typewrappers.h: Introduce wrapper
for unsigned long long type
Set up the types for the domainMemoryStats function and insert it into the
virDriver structure definition. Because of static initializers, update
every driver and set the new field to NULL.
* include/libvirt/libvirt.h.in: new API
* src/driver.h src/*/*_driver.c src/vbox/vbox_tmpl.c: add the new
entry to the driver structure
* python/generator.py: fix compiler errors, the actual python binding is
implemented later
* include/libvirt/virterror.h src/util/virterror.c: add new domain
VIR_FROM_CPU for errors
* src/conf/cpu_conf.c src/conf/cpu_conf.h: new parsing module
* src/Makefile.am proxy/Makefile.am: include new files
* src/conf/capabilities.[ch] src/conf/domain_conf.[ch]: reference
new code
* src/libvirt_private.syms: private export of new entry points
This is trivial for QEMU since you just have to not stop the vm before
starting the dump. And for Xen, you just pass the flag down to xend.
* include/libvirt/libvirt.h.in (virDomainCoreDumpFlags): Add VIR_DUMP_LIVE.
* src/qemu/qemu_driver.c (qemudDomainCoreDump): Support live dumping.
* src/xen/xend_internal.c (xenDaemonDomainCoreDump): Support live dumping.
* tools/virsh.c (opts_dump): Add --live. (cmdDump): Map it to VIR_DUMP_LIVE.
This patch adds the --crash option (already present in "xm dump-core")
to "virsh dump". virDomainCoreDump already has a flags argument, so
the API/ABI is untouched.
* include/libvirt/libvirt.h.in (virDomainCoreDumpFlags): New flag for
CoreDump
* src/test/test_driver.c (testDomainCoreDump): Do not crash
after dump unless VIR_DUMP_CRASH is given.
* src/qemu/qemu_driver.c (qemudDomainCoreDump): Shutdown the domain
instead of restarting it if --crash is passed.
* src/xen/xend_internal.c (xenDaemonDomainCoreDump): Support --crash.
* tools/virsh.c (opts_dump): Add --crash.
(cmdDump): Map it to flags for virDomainCoreDump and pass them.
This adds a new flag, VIR_MIGRATE_PAUSED, that mandates pausing
the migrated VM before starting it.
* include/libvirt/libvirt.h.in (virDomainMigrateFlags): Add VIR_MIGRATE_PAUSED.
* src/qemu/qemu_driver.c (qemudDomainMigrateFinish2): Handle VIR_MIGRATE_PAUSED.
* tools/virsh.c (opts_migrate): Add --suspend. (cmdMigrate): Handle it.
* tools/virsh.pod (migrate): Document it.
There is currently no way to determine the libvirt version of a remote
libvirtd we are connected to. This is a useful piece of data to enable
feature detection.
* src/xen/xen_driver.c: Add support for VIR_MIGRATE_PERSIST_DEST flag
* src/xen/xend_internal.c: Add support for VIR_MIGRATE_UNDEFINE_SOURCE flag
* include/libvirt/virterror.h, src/util/virterror.c: Add new errorcode
VIR_ERR_MIGRATE_PERSIST_FAILED
Introduce a number of new APIs to expose some boolean properties
of objects, which cannot otherwise reliably determined, nor are
aspects of the XML configuration.
* virDomainIsActive: Checking virDomainGetID is not reliable
since it is not possible to distinguish between error condition
and inactive domain for ID of -1.
* virDomainIsPersistent: Check whether a persistent config exists
for the domain
* virNetworkIsActive: Check whether the network is active
* virNetworkIsPersistent: Check whether a persistent config exists
for the network
* virStoragePoolIsActive: Check whether the storage pool is active
* virStoragePoolIsPersistent: Check whether a persistent config exists
for the storage pool
* virInterfaceIsActive: Check whether the host interface is active
* virConnectIsSecure: whether the communication channel to the
hypervisor is secure
* virConnectIsEncrypted: whether any network based commnunication
channels are encrypted
NB, a channel can be secure, even if not encrypted, eg if it does
not involve the network, like a UNIX socket, or pipe.
* include/libvirt/libvirt.h.in: Define public API
* src/driver.h: Define internal driver API
* src/libvirt.c: Implement public API entry point
* src/libvirt_public.syms: Export API symbols
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/interface/netcf_driver.c, src/network/bridge_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c: Stub out driver tables
Some monitor commands may take a very long time to complete. It is
not desirable to block other incoming API calls forever. With this
change, if an existing API call is holding the job lock, additional
API calls will not wait forever. They will time out after a short
period of time, allowing application to retry later.
* include/libvirt/virterror.h, src/util/virterror.c: Add new
VIR_ERR_OPERATION_TIMEOUT error code
* src/qemu/qemu_driver.c: Change to a timed condition variable
wait for acquiring the monitor job lock
* include/libvirt/virterror.h src/util/virterror.c: add a new error
VIR_ERR_CONFIG_UNSUPPORTED for valid but unsupported configuration options
* src/conf/domain_conf.c: Throw an error if guestfwd address isn't IPv4
and cleanup a number of parsing return error values.
This patch adds the flag VIR_INTERFACE_XML_INACTIVE to
virInterfaceGetXMLDesc's flags. When it is*not* set (the default), the
live interface info will be returned in the XML (in particular, the IP
address(es) and netmask(s) will be retrieved by querying the interface
directly, rather than reporting what's in the config file). The
backend of this is in netcf's ncf_if_xml_state() function.
* configure.in libvirt.spec.in: requires netcf >= 0.1.3
* include/libvirt/libvirt.h.in: adds flag VIR_INTERFACE_XML_INACTIVE
* src/conf/interface_conf.c src/interface/netcf_driver.c src/libvirt.c:
update the parsing and backend routines accordingly
* tools/virsh.c: change interface edit to inactive definition and
adds the inactive flag for interface dump
Normally, when you migrate a domain from host A to host B,
the domain on host A remains defined but shutoff and the domain
on host B remains running but is a "transient". Add a new
flag to virDomainMigrate() to allow the original domain to be
undefined on source host A, and a new flag to virDomainMigrate() to
allow the new domain to be persisted on the destination host B.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Introduces several new public API options for migration
- VIR_MIGRATE_PEER2PEER: With this flag the client only
invokes the virDomainMigratePerform method, expecting
the source host driver to do whatever is required to
complete the entire migration process.
- VIR_MIGRATE_TUNNELLED: With this flag the actual data
for migration will be tunnelled over the libvirtd RPC
channel. This requires that VIR_MIGRATE_PEER2PEER is
also set.
- virDomainMigrateToURI: This is variant of the existing
virDomainMigrate method which does not require any
virConnectPtr for the destination host. Given suitable
driver support, this allows for all the same modes as
virDomainMigrate()
The URI for VIR_MIGRATE_PEER2PEER must be a valid libvirt
URI. For non-p2p migration a hypervisor specific migration
URI is used.
virDomainMigrateToURI without a PEER2PEER flag is only
support for Xen currently, and it involves XenD talking
directly to XenD, no libvirtd involved at all.
* include/libvirt/libvirt.h.in: Add VIR_MIGRATE_PEER2PEER
flag for migration
* src/libvirt_internal.h: Add feature flags for peer to
peer migration (VIR_FEATURE_MIGRATE_P2P) and direct
migration (VIR_MIGRATE_PEER2PEER mode)
* src/libvirt.c: Implement support for VIR_MIGRATE_PEER2PEER
and virDomainMigrateToURI APIs.
* src/xen/xen_driver.c: Advertise support for DIRECT migration
* src/xen/xend_internal.c: Add TODO item for p2p migration
* src/libvirt_public.syms: Export virDomainMigrateToURI
method
* src/qemu/qemu_driver.c: Add support for PEER2PEER and
migration, and adapt TUNNELLED migration.
* tools/virsh.c: Add --p2p and --direct args and use the
new virDomainMigrateToURI method where possible.
Implementation of tunnelled migration, using a Unix Domain Socket
on the qemu backend. Note that this requires very new versions of
qemu (0.10.7 at least) in order to get the appropriate bugfixes.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* include/libvirt/libvirt.h.in: Public API contract for
virStreamPtr object
* src/libvirt_public.syms: Export data stream APIs
* src/libvirt_private.syms: Export internal helper APIs
* src/libvirt.c: Data stream API driver dispatch
* src/datatypes.h, src/datatypes.c: Internal helpers for virStreamPtr
object
* src/driver.h: Define internal driver API for streams
* .x-sc_avoid_write: Ignore src/libvirt.c because it trips
up on comments including write()
* python/Makefile.am: Add libvirt-override-virStream.py
* python/generator.py: Add rules for virStreamPtr class
* python/typewrappers.h, python/typewrappers.c: Wrapper
for virStreamPtr
* docs/libvirt-api.xml, docs/libvirt-refs.xml: Regenerate
with new APIs
* include/libvirt/libvirt.h, include/libvirt/libvirt.h.in: Add
virSecretGetUsageType, virSecretGetUsageID and virLookupSecretByUsage
* python/generator.py: Mark virSecretGetUsageType, virSecretGetUsageID
as not throwing exceptions
* qemud/remote.c: Implement dispatch for virLookupSecretByUsage
* qemud/remote_protocol.x: Add usage type & ID as attributes of
remote_nonnull_secret. Add RPC calls for new public APIs
* qemud/remote_dispatch_args.h, qemud/remote_dispatch_prototypes.h,
qemud/remote_dispatch_ret.h, qemud/remote_dispatch_table.h,
qemud/remote_protocol.c, qemud/remote_protocol.h: Re-generate
* src/datatypes.c, src/datatypes.h: Add usageType and usageID as
properties of virSecretPtr
* src/driver.h: Add virLookupSecretByUsage driver entry point
* src/libvirt.c: Implement virSecretGetUsageType, virSecretGetUsageID
and virLookupSecretByUsage
* src/libvirt_public.syms: Export virSecretGetUsageType, virSecretGetUsageID
and virLookupSecretByUsage
* src/remote_internal.c: Implement virLookupSecretByUsage entry
* src/secret_conf.c, src/secret_conf.h: Remove the
virSecretUsageType enum, now in public API. Make volume
path mandatory when parsing XML
* src/secret_driver.c: Enforce usage uniqueness when defining secrets.
Implement virSecretLookupByUsage api method
* src/virsh.c: Include usage for secret-list command
Convert all the secret/storage encryption APIs / wire format to
handle UUIDs in raw format instead of non-canonical printable
format. Guarentees data format correctness.
* docs/schemas/storageencryption.rng: Make UUID mandatory for a secret
and validate fully
* docs/schemas/secret.rng: Fully validate UUID
* include/libvirt/libvirt.h, include/libvirt/libvirt.h.in, Add
virSecretLookupByUUID and virSecretGetUUID. Make
virSecretGetUUIDString follow normal API design pattern
* python/generator.py: Skip generation of virSecretGetUUID,
virSecretGetUUIDString and virSecretLookupByUUID
* python/libvir.c, python/libvirt-python-api.xml: Manual impl
of virSecretGetUUID,virSecretGetUUIDString and virSecretLookupByUUID
* qemud/remote.c: s/virSecretLookupByUUIDString/virSecretLookupByUUID/
Fix get_nonnull_secret/make_nonnull_secret to use unsigned char
* qemud/remote_protocol.x: Fix remote_nonnull_secret to use a
remote_uuid instead of remote_nonnull_string for UUID field.
Rename REMOTE_PROC_SECRET_LOOKUP_BY_UUID_STRING to
REMOTE_PROC_SECRET_LOOKUP_BY_UUID_STRING and make it take an
remote_uuid value
* qemud/remote_dispatch_args.h, qemud/remote_dispatch_prototypes.h,
qemud/remote_dispatch_ret.h, qemud/remote_dispatch_table.h,
qemud/remote_protocol.c, qemud/remote_protocol.h: Re-generate
* src/datatypes.h, src/datatypes.c: Store UUID in raw format instead
of printable. Change virGetSecret to use raw format UUID
* src/driver.h: Rename virDrvSecretLookupByUUIDString to
virDrvSecretLookupByUUID and use raw format UUID
* src/libvirt.c: Add virSecretLookupByUUID and virSecretGetUUID
and re-implement virSecretLookupByUUIDString and
virSecretGetUUIDString in terms of those
* src/libvirt_public.syms: Add virSecretLookupByUUID and
virSecretGetUUID
* src/remote_internal.c: Rename remoteSecretLookupByUUIDString
to remoteSecretLookupByUUID. Fix typo in args for
remoteSecretDefineXML impl. Use raw UUID format for
get_nonnull_secret and make_nonnull_secret
* src/storage_encryption_conf.c, src/storage_encryption_conf.h:
Storage UUID in raw format, and require it to be present in
XML. Use UUID parser to validate.
* secret_conf.h, secret_conf.c: Generate a UUID if none is provided.
Storage UUID in raw format.
* src/secret_driver.c: Adjust to deal with raw UUIDs. Save secrets
in a filed with printable UUID, instead of base64 UUID.
* src/virsh.c: Adjust for changed public API contract of
virSecretGetUUIDString.
* src/storage_Backend.c: DOn't undefine secret we just generated
upon successful volume creation. Fix to handle raw UUIDs. Generate
a non-clashing UUID
* src/qemu_driver.c: Change to use lookupByUUID instead of
lookupByUUIDString
This implementation stores the secrets in an unencrypted text file,
for simplicity in implementation and debugging.
(Symmetric encryption, e.g. using gpgme, will not be difficult to add.
Because the TLS private key used by libvirtd is stored unencrypted,
encrypting the secrets file does not currently provide much additional
security.)
* include/libvirt/virterror.h, src/virterror.c (VIR_ERR_NO_SECRET): New
error number.
* po/POTFILES.in, src/Makefile.am: Add secret_driver.
* bootstrap: Use gnulib's base64 module.
* src/secret_driver.c, src.secret_driver.h, src/libvirt_private.syms:
Add local secret driver.
* qemud/qemud.c (qemudInitialize): Use the local secret driver.
* include/libvirt/virterror.h, src/virterror.c: Add VIR_WAR_NO_SECRET
* src/libvirt_private.syms, src/datatypes.h, src/datatypes.c: Type
virSecret struct definition and helper APIs
* src/driver.h: Sub-driver API definitions for secrets
* src/libvirt.c: Define new sub-driver for secrets
This patch adds a "secret" as a separately managed object, using a
special-purpose API to transfer the secret values between nodes and
libvirt users.
* docs/schemas/secret.rng, docs/schemas/Makefilem.am: Add new
schema for virSecret objects
* docs/*html: Re-generated
* docs/formatsecret.html.in, docs/sitemap.html.in: Add page
describing the virSecret XML schema
* include/libvirt/libvirt.h.in: Define the new virSecret public
API
* src/libvirt_public.syms: Export symbols for new public APIs
* mingw32-libvirt.spec.in, libvirt.spec.in: Add secret.rng to
files list
Features supported:
- Connects to HMC/VIOS or IVM systems.
- Life cycle commands (resume and shutdown).
- dumpxml
- 'list' and 'list --all'
What is being implemented:
- better and centralized control for UUID
- definexml
- CPU management commands
* src/domain_conf.c src/domain_conf.h: first version of the driver
* configure.in src/Makefile.am include/libvirt/virterror.h
src/domain_conf.[ch] src/libvirt.c src/virterror.c: glue the driver
in the general framework
* src/esx/esx_*.[ch]: the driver, uses a remote minimal SOAP client
to talk to the VI services on ESX nodes.
* configure.in include/libvirt/virterror.h src/Makefile.am src/driver.h
src/libvirt.c src/virterror.c: glue in the new driver
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in: adds the new
flag VIR_MEMORY_PHYSICAL for virDomainMemoryPeek
* src/libvirt.c: update the front-end checking
* src/qemu_driver.c: extend the QEmu driver
* include/libvirt/virterror.h src/virterror.c: if a driver's
virInterfaceLookupByMACString() function finds more than one interface
with the desired MAC Address, this new error is raised.
* include/libvirt/libvirt.h[.in]: adds signatures for the new exported
functions virConnectNumOfDefinedInterfaces and
virConnectListDefinedInterfaces
* src/libvirt_public.syms: export the new symbols
* src/opennebula/one_conf.[ch] src/opennebula/one_driver.[ch]:
the OpenNebula driver
* configure.in include/libvirt/virterror.h qemud/Makefile.am
qemud/qemud.c src/Makefile.am src/domain_conf.[ch] src/driver.h
src/libvirt.c src/virterror.c: integration of the OpenNebula
driver in the libvirt infrastructure
* AUTHORS: add Abel Miguez Rodriguez
daniel
* configure.in include/libvirt/virterror.h src/Makefile.am
src/domain_conf.[ch] src/driver.h src/virterror.c src/vbox/README
src/vbox/vbox_CAPI_v2_2.h src/vbox/vbox_V2_2.c
src/vbox/vbox_XPCOMCGlue.[ch] src/vbox/vbox_driver.[ch]
src/vbox/vbox_tmpl.c: integration of the VirtualBox support
patches by Pritesh Kothari
Daniel
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in
src/driver.h src/libvirt.c src/libvirt_public.syms
src/lxc_driver.c src/openvz_driver.c src/qemu_driver.c
src/test.c src/uml_driver.c: add the public APIs for
virNodeDeviceDettach virNodeDeviceReAttach and virNodeDeviceReset
and extends the driver structure accordingly.
Daniel
* configure.in docs/* NEWS: release of 0.5.0
* po/*: updated from the translators and merged
* docs/apibuild.py src/libvirt.c: avoid some warnings at doc
generation time
daniel
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in
src/libvirt.c src/libvirt_sym.version: new libvirt event entry
points, big patch provided by Ben Guthro
* Makefile.am configure.in src/driver.h src/event.c src/event.h
src/internal.h src/libvirt.c src/libvirt_sym.version src/lxc_driver.c
src/openvz_driver.c src/qemu_conf.h src/qemu_driver.c
src/remote_internal.c src/storage_backend_fs.c src/test.c
qemud/event.c qemud/event.h qemud/mdns.c qemud/qemud.c
qemud/qemud.h qemud/remote.c qemud/remote_dispatch_localvars.h
qemud/remote_dispatch_proc_switch.h qemud/remote_dispatch_prototypes.h
qemud/remote_protocol.c qemud/remote_protocol.h
qemud/remote_protocol.x proxy/Makefile.am python/generator.py:
Not much is left untouched by the patch adding the events support
* docs/libvirt-api.xml docs/libvirt-refs.xml
docs/html/libvirt-libvirt.html: regenerated the docs
* examples/domain-events/events-c/Makefile.am
examples/domain-events/events-c/event-test.c: a test example
* AUTHORS: added Ben Guthro
daniel
* Makefile.maint (sync-vcs-ignore-files): New target.
Prompted by a patch from James Morris.
http://thread.gmane.org/gmane.comp.emulators.libvirt/8619/focus=8773
Add all (now-generated) .gitignore files.
* .gitignore: New file.
* build-aux/.gitignore: New file.
* docs/.gitignore: New file.
* docs/devhelp/.gitignore: New file.
* docs/examples/.gitignore: New file.
* docs/examples/python/.gitignore: New file.
* gnulib/lib/.gitignore: New file.
* gnulib/lib/arpa/.gitignore: New file.
* gnulib/lib/netinet/.gitignore: New file.
* gnulib/lib/sys/.gitignore: New file.
* gnulib/tests/.gitignore: New file.
* include/.gitignore: New file.
* include/libvirt/.gitignore: New file.
* po/.gitignore: New file.
* proxy/.gitignore: New file.
* python/.gitignore: New file.
* python/tests/.gitignore: New file.
* qemud/.gitignore: New file.
* src/.gitignore: New file.
* tests/.gitignore: New file.
* tests/confdata/.gitignore: New file.
* tests/sexpr2xmldata/.gitignore: New file.
* tests/virshdata/.gitignore: New file.
* tests/xencapsdata/.gitignore: New file.
* tests/xmconfigdata/.gitignore: New file.
* tests/xml2sexprdata/.gitignore: New file.
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in:
remove Xen centric comments patch from Guido Günther
* docs/apibuild.py: ignore VIR_DEPRECATED
* docs/libvirt-*.xml docs/html/libvirt-*.html: regenerated the
documentation for the API
Daniel
release
* src/xm_internal.c: fix xm driver serialization escapes
* tests/xmconfigtest.c tests/xmconfigdata/test-escape-paths.cfg
tests/xmconfigdata/test-escape-paths.xml: add test for previous
problem
Daniel
* include/libvirt/libvirt.h.in, src/libvirt.c, src/driver.h,
src/libvirt_sym.version: New virDomainMemoryPeek API.
* qemud/remote.c, qemud/remote_protocol.x, src/remote_internal.c:
Support for remote.
* src/qemu_driver.c: QEMU driver implementation of API.
* src/test.c: Test driver (null) implementation of API.
* docs/hvsupport.html.in: Document API.
* libvirt.spec.in: New path /var/cache/libvirt for temporary
storage of memory images.
* qemud/libvirtd.init.in: Remove any old temp files in
/var/cache/libvirt on restarts.
* src/Makefile.am: make install creates /var/cache/libvirt.
* configure.in: Detect mkdir -p.
* configure.in: Document AC_SYS_LARGEFILE.
* docs/hvsupport.html.in: Document HV support for virDomainBlockPeek.
* include/libvirt/libvirt.h.in, src/driver.h, src/libvirt.c,
src/libvirt_sym.version: Add virDomainBlockPeek infrastructure.
* src/qemu_driver.c, src/test.c: Null versions of this call.
* src/xen_unified.c, src/xend_internal.c, src/xend_internal.h,
src/xm_internal.c, src/xm_internal.h: Xen implementation.
* tests/sexpr2xmldata/sexpr2xml-curmem.xml,
tests/sexpr2xmldata/sexpr2xml-no-source-cdrom.xml: XML output
has been reordered slightly in the Xen driver, but should be
functionally the same.
* include/libvirt/libvirt.h.in: Add VIR_DEPRECATED macro.
* src/internal.h: Internal code is allowed to use deprecated
features, so override VIR_DEPRECATED here.
* include/libvirt/virterror.h: Deprecate the conn, dom and net
fields in the _virError structure.
Done using this command (also includes .c.in and .h.in files):
for i in $(g ls-files|grep -E '\.[ch](\.in)?$'|grep -v gnulib); do
expand -i $i > j && mv j $i;done
* configure.in include/libvirt/virterror.h src/Makefile.am
src/driver.h src/lxc_conf.[ch] src/lxc_driver.[ch] src/virterror.c:
Applied 3 patches from Dave Leskovec for intial support of
Linux containers, configured off by default, work in progress.
* src/libvirt.c: improve virDomainCreateLinux xmlDesc description
Daniel
src/libvirt.c src/qemu.conf src/remote_internal.c src/xend_internal.c
tests/confdata/libvirtd.conf tests/confdata/libvirtd.out: patch from
Atsushi SAKAI fixing a ot more typo
Daniel
* src/test.c, include/libvirt/libvirt.h.in: Remove virDomainRestart
from the public API (it was not used), and move it into the test
driver where it is used for purely internal purposes.
src/driver.h src/libvirt.c src/openvz_driver.c src/qemu_driver.c
src/test.c src/xen_unified.c src/xend_internal.c: add new API
virNodeGetFreeMemory(), extends the driver. Lacks remote and
QEmu support though.
* src/libvirt.c: allows to fix virNodeGetCellsFreeMemory() adding
parameter check for startCell.
* proxy/libvirt_proxy.c src/xend_internal.[ch]
include/libvirt/libvirt.h include/libvirt/libvirt.h.in: applied
vncpasswd dump patch from Mark Johnson but with the
virDomainXMLFlags extension as suggested by Daniel Berrange
this changed a couple of internal APIs too
* tests/sexpr2xmldata/sexpr2xml-no-source-cdrom.xml: fix one of the
tests affected by bootloader dump change.
Daniel
src/qemu_driver.c src/remote_internal.c src/test.c
src/xen_internal.[ch] src/xen_unified.c src/xend_internal.[ch]
src/libvirt.c src/libvirt_sym.version: adding NUMA support patches
from Beth Kon adding new virNodeGetCellsFreeMemory entry point
and extending the virConnectGetCapabilities one. Fix a couple of
issues in the patch and add to exported symbols from shared lib.
* docs/virsh.pod docs/virsh.1 src/virsh.c: added new command
freecell to get the available memory on the node or in a NUMA cell.
* docs/*: updated and regenerated the documentation
Daniel
* src/libvirt.c (virDomainMigrate): Added virDomainMigrate
API call.
* src/xend_internal.c, src/xen_unified.c: Support for migration
of Xen domains.
* src/xen_internal.c: Xen capabilities indicates level of
support for migration.
* qemud/remote.c, qemud/remote_protocol.x, src/remote_internal.c:
Support for migration between remote hypervisors.
* src/virsh.c: Added 'virsh migrate' command.
* docs/libvir.html, docs/hvsupport.html: Updated hvsupport
documentation.
src/openvz_driver.c src/qemu_driver.c src/util.c src/util.h:
cleanup patches from Shuveb Hussain, with new util module for
common code shared between drivers.
Daniel
* include/libvirt/virterror.h, src/virterror.c, src/libvirt.c:
Add VIR_ERR_NO_DOMAIN and VIR_ERR_NO_NETWORK errors, which
indicate that there is no domain/network from vir*Lookup* functions.
* src/qemu_driver.c: Use VIR_ERR_NO_DOMAIN in lookup functions.
* src/test.c: Use VIR_ERR_NO_DOMAIN in lookup functions.
* include/libvirt/libvirt.h.in, src/libvirt.c, src/libvirt_sym.version,
python/generator.py: Added virDomainGetConnect and
virNetworkGetConnect to allow us to get the "hidden"
connection associated with each domain or network.
* src/libvirt.c, src/qemu_internal.c, src/test.c,
src/xen_unified.c, src/xend_internal.c,
src/libvirt.c, include/libvirt/virterror.h:
VIR_ERR_NO_SUPPORT means the function is not supported by
the hypervisor. VIR_ERR_NO_CONNECT means the connection
failed. VIR_ERR_CALL_FAILED is deprecated. Drivers which
decline a URI now no longer produce an error. Make
xen_unified.c ignore naked URI strings like "foo".
src/driver.h src/libvirt.c src/libvirt_sym.version
src/proxy_internal.c src/qemu_internal.c src/test.c
src/virsh.c src/xen_internal.c src/xen_internal.h src/xen_unified.c
src/xend_internal.c src/xm_internal.c src/xs_internal.c:
Applied patches from Atsushi SAKAI to add the scheduler API,
with patch from Rich Jones for error handing, and a number
of cleanups and more error checking from me
Daniel
* src/test.c, src/libvirt.c, src/virterror.c,
include/libvirt/virterror.h: Add a VIR_FROM_TEST error class
and ensure that test driver errors are from this class.
Tidy up the error messages generated by the test driver when
user doesn't add a path to the URL and avoid open ("/").
proxy/libvirt_proxy.c qemud/Makefile.am qemud/conf.c qemud/conf.h
qemud/dispatch.c qemud/internal.h qemud/protocol.h
src/driver.h src/internal.h src/libvirt.c src/libvirt_sym.version
src/proxy_internal.c src/proxy_internal.h src/qemu_internal.c
src/test.c src/virsh.c src/virterror.c src/xen_internal.c
src/xen_internal.h src/xend_internal.c src/xm_internal.c
src/xml.h src/xs_internal.c: applied patch from Richard Jones
adding virConnectGetCapabilities(), plus various small little
fixes
* docs/*: fixed the api extractor script and regenerated
Daniel
src/driver.h src/libvirt.c src/libvirt_sym.version
src/proxy_internal.c src/qemu_internal.c src/test.c src/virsh.c
src/xen_internal.c src/xen_internal.h src/xend_internal.c
src/xm_internal.c src/xs_internal.c: applied patch from
Masayuki Sunou to add and entry point to check the maximum
number of virtual CPU supported by a virtualization mechanism
* doc/*.html doc/libvirt-*.xml: regenerated the interfaces descriptions
and associated docs.
Daniel
* include/libvirt/libvirt.h.in, src/libvirt.c add
virDomainGetAutostart(), virDomainSetAutostart(),
virNetworkGetAutostart() and virNetworkSetAutostart().
* src/libvirt_sym.version: export the API
* src/driver.h: add methods to the driver vtables.
* src/proxy_internal.c, src/qemu_internal.c,
src/test.c, src/xen_internal.c, src/xend_internal.c,
src/xm_internal.c, src/xs_internal.c: set those
methods to NULL
Fix a few leaks
* qemud/qemud.c: qemudCleanup(): free the socket
structures
* qemud/conf.c: fix various leaks in the xml parsing
* qemud/iptables.c: fix a typo causing a leak
* include/libvirt/libvirt.h.in, src/libvirt.c: add
virNetworkGetBridgeName() to allow finding out what
bridge to connect to in order to join a network.
* src/driver.h: add networkGetBridgeName() to vtable.
* qemud/protocol.h: add the request and reply to
the qemud protocol.
* qemud/dispatch.c, qemud/driver.[ch]: handle them
here.
* src/qemu_internal.c: implement GetBridgeName()
in the qemu driver.
* src/libvirt_sym.version: add new symbol.
Note: potential ABI break here, but people should
only really be using virError structs returned from
libvirt itself.
* include/libvirt/virterror.h: add virNetwork
to virError
* src/internal.h, src/virterror.c: add network param
to __virRaiseError()
* src/conf.c, src/hash.c, src/libvirt.c, src/proxy_internal.c,
src/qemu_internal.c, src/sexpr.c, src/test.c, src/xen_internal.c,
src/xend_internal.c, src/xm_internal.c, src/xml.c, src/xmlrpc.c,
src/xs_internal.c: update.
* include/libvirt/libvirt.h.in: add the networks APIs
* include/libvirt/virterror.h: add some error codes
* src/driver.h: add network driver vtable
* src/hash.c: add networks hash
* src/internal.h: add virNetwork
* src/libvirt.c: hook up the APIs to the network
driver
* src/libvirt_sym.version: add the new APIs
* src/virterror.c: handle the new error codes
include/libvirt/libvirt.h: preparing libvirt-0.1.9 release
* po/*.po: more updates and fix all the .po to not barf when msgfmt
tries to process them
Daniel
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in src/driver.h
src/libvirt.c src/proxy_internal.c src/test.c src/virsh.c
src/xen_internal.c src/xend_internal.c src/xm_internal.c
src/xs_internal.c: added support for dumping core of domains
assuming a xend with the latest patch to do so.
Daniel
src/driver.h src/libvirt.c src/libvirt_sym.version
src/proxy_internal.c src/test.c src/xen_internal.c
src/xend_internal.c src/xml.c src/xml.h src/xs_internal.c:
intagrated patch from Michel Ponceau to add hot-plug devices
support to the API, integrated in driver API and fixed
a few small things. Still a TODO in src/xml.c about
moving xenstore direct accesses to a new routine.
Daniel
* configure.in include/libvirt/virterror.h src/Makefile.am
src/conf.c src/conf.h src/virterror.c src/xen_internal.c:
adding a subset of Xen config file parser, and serializer
* tests/Makefile.am tests/conftest.c tests/test_conf.sh
tests/confdata/Makefile.am tests/confdata/fc4.conf
tests/confdata/fc4.out: adding test program for config in and out
Daniel
include/libvirt/libvirt.h.in: preparing release of 0.1.4,
regenerated docs, fixed a few things
* src/proxy_internal.c src/test.c src/xend_internal.c:
a few trivial fixes
Daniel
src/libvirt.c src/libvirt_sym.version src/xen_internal.c
src/xen_internal.h src/xend_internal.c src/xend_internal.h:
applied patch from Michel Ponceau and Philippe Berthault for
virtual CPU and affinity support plus a bit of cleanup.
Daniel
proxy/proxy.h proxy/proxy_client.c src/internal.h src/xen_internal.c
src/xend_internal.c: started working on a proxy to access xend
for unpriviledged users to avoid opening xend HTTP service to
serve those read-only operations.
Daniel
include/libvirt/virterror.h python/generator.py python/libvir.c
python/libvirt_wrap.h src/driver.h src/internal.h src/test.h
src/virsh.c src/virterror.c src/xend_internal.c src/xend_internal.h
src/xml.c src/xml.h: moved the includes from include/ to
include/libvirt to reflect the installed include tree. This
avoid using "" in the includes themselves.
Daniel
virDomainSetMemory to set up the target memory use for a domain
* src/driver.h src/libvirt.c src/xen_internal.c src/xend_internal.[ch]
src/xs_internal.[ch]: added a new entry point in the drivers for this,
also fixed the xen store entry, as changing
/local/domain/$$/memory/target affects the target memory not the max,
apparently max is not visible at the xenstore level (or I missed it)
Daniel
src/libvirt_sym.version src/*_internal.[ch]: added an entry
point for reboot and corresponding driver plug
* src/virsh.c: added a reboot option using it
* docs/*: regenerated
Daniel
src/internal.h src/libvirt_sym.version src/xen_internal.c
src/xs_internal.c: added a new entry point to get node hardware
informations virGetNodeInfo, and associated driver hook.
* src/xend_internal.c: implemented the node and version information
hooks for the Xen Daemon
* python/libvir.c python/libvirt-python-api.xml python/generator.py:
also added Python bindings for the new call
Daniel
* include/libvirt.h include/libvirt.h.in: added intialization function
* include/virterror.h src/virterror.c: one more error code
* src/internal.h: first part of Jim's format checking
* src/libvirt.c src/xen_internal.[ch] src/xend_internal.[ch]
src/xs_internal.[ch]: initialization and registration of drivers
Daniel
src/virterror.c: created a new module related to Xen Store accesses
* src/libvirt.c src/xen_internal.[ch] src/xend_internal.[ch]:
nearly completed the separation of the code from the different modules
Daniel
virDefaultErrorFunc()
* src/sexpr.c src/xen_internal.c src/virterror.c include/virterror.h:
adding more error reporting though the code, nearly complete.
* src/sexpr.c: added specific error function to avoid an error report.
Daniel
* include/virterror.h src/internal.h src/libvirt.c src/virterror.c
src/xend_internal.c: commiting a first pass at adding error handling
in the code, not finished, but it starts to work, need more coverage
and testing.
Daniel
src/virterror.c include/Makefile.am include/virterror.h: adding
the public APIs for errors, callbacks and synchronous. The boring
stuff is still left to do, plugging it. Also need to be exposed
at the python level.
* doc//*: rebuilt
Daniel
src/libvirt_sym.version: added virDomainLookupByUUID and
virDomainGetUUID to be able to use the persistant UUID names
* docs//*: rebuilt the docs following the API extension
Daniel
docs/site.xsl: integates the examples page in the web site
* docs//* : fixed generator and rebuilt the docs
* python/tests/basic.py python/tests/create.py: couple cleanups
Daniel
* include/libvirt.h include/libvirt.h.in: cleanup
* src/libvirt.c: remove debugging output
* src/xend_internal.c src/xml.c src/xml.h: reimplement
virDomainGetXMLDesc() based on xend interface, now work as user too.
Daniel
* include/libvirt.h* src/libvirt.c src/xend_internal.[ch]
src/xml.[ch]: added XML parsing for Xen domain descriptions
needed for creates, plugged in a converter to s-exp and
xend call. Modified the virDomainCreateLinux() to reflect
that XML based description. Seems to work.
* python/tests/create.py: added a test case which seems to work
not tested much yet
* docs/*: regenerated
Daniel
restore API (though it would be better if it was returning
a domain pointer in case of success)
* src/virsh.c: added save and restore to the commands, tested,
the option handling need work though
Daniel
doc fix
* src/virsh.c: fix a integer being formatted as %s in idof
* src/internal.h src/libvir.c src/xend_internal.[ch]: started to
integrated the xend back-end, especially for getting informations
about a domain.
Daniel
src/libvir_sym.version src/virsh.c src/xml.c: started working on
the XML dump, added a dumpxml virsh version and a bit of
infrastructure code. Found a way to detect dead ID from xenstore
data.
Daniel
include/Makefile.am: provide/fix library versionning information
include/libvir.h is now generated !
* include/libvir.h.in src/libvir.c: revamp APIs and implement
complete ones.
* src/virsh.c: finish the version command and a bit of cleanup.
Daniel
* src/libvir.c src/libvir_sym.version src/xen_internal.[ch]
include/libvir.h: implementing hypervisor Version and Type interfaces
* src/virsh.c: adding a version command, WIP
Daniel
docs/libvir-refs.xml: fix XML API generation
* include/libvir.h src/libvir.c src/virsh.c: fix the info memory
API again, use KB, not bytes so that an unsigned long is sufficient.
Daniel
one.
* include/libxen.h src/libxen.c src/libxen_sym.version: extend API
start to access libxenctrl directly (need xen update to get includes)
* src/xensh.c: access to both xenstore and hypervisor
Daniel
config.h.in configure.in: fix make dist, add rpm packaging
* src/libxen_sym.version src/Makefile.am: set a policy of no
export by default of library symbols
Daniel
