While checking the existing partitions in virStorageBackendDiskPartFormat,
the code would erroneously compare the volume target format type (eg, the
virStoragePartedFsType) rather than the source partition type (eg, the
virStorageVolTypeDisk) which is set during virStorageBackendDiskReadPartitions.
During virStorageBackendDiskCreateVol if virStorageBackendDiskReadPartitions
fails, then we were leaving with an error and a partition on the disk for
which there was no corresponding volume and used space on the disk which
could be reclaimable through direct parted activity. On a subsequent restart,
reload, or refresh the volume may magically appear too.
Move the API to before virStorageBackendDiskCreateVol in order to be
able to call the DeleteVol API when virStorageBackendDiskReadPartitions
fails so that we don't by chance leave a partition on the disk.
When creating a RAW file, we don't take advantage
of clone of btrfs.
Add a VIR_STORAGE_VOL_CREATE_REFLINK flag to request
a reflink copy.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
For stateless, client side drivers, it is never correct to
probe for secondary drivers. It is only ever appropriate to
use the secondary driver that is associated with the
hypervisor in question. As a result the ESX & HyperV drivers
have both been forced to do hacks where they register no-op
drivers for the ones they don't implement.
For stateful, server side drivers, we always just want to
use the same built-in shared driver. The exception is
virtualbox which is really a stateless driver and so wants
to use its own server side secondary drivers. To deal with
this virtualbox has to be built as 3 separate loadable
modules to allow registration to work in the right order.
This can all be simplified by introducing a new struct
recording the precise set of secondary drivers each
hypervisor driver wants
struct _virConnectDriver {
virHypervisorDriverPtr hypervisorDriver;
virInterfaceDriverPtr interfaceDriver;
virNetworkDriverPtr networkDriver;
virNodeDeviceDriverPtr nodeDeviceDriver;
virNWFilterDriverPtr nwfilterDriver;
virSecretDriverPtr secretDriver;
virStorageDriverPtr storageDriver;
};
Instead of registering the hypervisor driver, we now
just register a virConnectDriver instead. This allows
us to remove all probing of secondary drivers. Once we
have chosen the primary driver, we immediately know the
correct secondary drivers to use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove the resize flag and use the same code path for all callers.
This flag was added by commit 18f0316 to allow virStorageFileResize
use 'safezero' while preserving the behavior.
Explicitly return -2 when a fallback to a different method should
be done, to make the code path more obvious.
Fail immediately when ftruncate fails in the mmap method,
as we did before commit 18f0316.
A recent lvm change has resulted in a change for the "default" type of
logical volume created when the "--virtualsize" or "--V" is supplied on
the command line (e.g. when the allocation and capacity values of a to
be created volume differ). It seems that at the very least the following
change adjusts the default type:
https://git.fedorahosted.org/cgit/lvm2.git/commit/?id=e0164f21
and the following may also have some impact.
https://git.fedorahosted.org/cgit/lvm2.git/commit/?id=87fc3b71
When using the virsh vol-create-as or vol-create xmlfile commands, the
result is that libvirt will now create a "thin logical volume" and a
"thin logical volume pool" rather than just a "thin snapshot logical
volume". For example the following sequence:
# lvcreate --name test -L 2M -V 5M lvm_test
Rounding up size to full physical extent 4.00 MiB
Rounding up size to full physical extent 8.00 MiB
Logical volume "test" created.
# lvs lvm_test
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
lvol1 lvm_test twi-a-tz-- 4.00m 0.00 0.98
test lvm_test Vwi-a-tz-- 8.00m lvol1 0.00
compared to the former code which had the following:
LV VG Attr LSize Pool Origin Data% Move Log Cpy%Sync Convert
test LVM_Test swi-a-s--- 4.00m [test_vorigin] 0.00
Since libvirt doesn't know how to parse the thin logical volume
and pool, it will fail to find the newly created volume and pool
even though it exists in the volume group.
It cannot find since the command used to find/parse returns a thin volume
'test' with no associated device, for example the output is:
lvol1##UgUwkp-fTFP-C0rc-ufue-xrYh-dkPr-FGPFPx#lvol1_tdata(0)#thin-pool#1#4194304#4194304#4194304#twi-a-tz--
test##NcaIoH-4YWJ-QKu3-sJc3-EOcS-goff-cThLIL##thin#0#8388608#4194304#8388608#Vwi-a-tz--
as compared to the former which had the following:
test#[test_vorigin]#Dt5Of3-4WE6-buvw-CWJ4-XOiz-ywOU-YULYw6#/dev/sda3(1300)#linear#1#4194304#4194304#4194304#swi-a-s---
While it's possible to generate code to handle the new thin lv and pool, this
patch will add a "--type snapshot" onto the lvcreate command libvirt uses
in order to "for now" be able to continue to utilize the thin snapshots
Currently virStorageFileResize() function uses build conditionals to
choose either the posix_fallocate() or syscall(SYS_fallocate) with no
fallback in order to preallocate the space in the newly resized file.
Since the safezero code has a similar set of conditionals modify the
resize and safezero code in order to allow the resize logic to make use
of safezero to unify the look/feel of the code paths.
Add a new boolean (resize) to safezero() to make the optional decision
whether to try syscall(SYS_fallocate) if the posix_fallocate fails because
HAVE_POSIX_FALLOCATE is not defined (eg, return -1 and errno == 0).
Create a local safezero_sys_fallocate in order to handle the resize
code paths that support that. If not present, the set errno = ENOSYS
in order to allow the caller to handle the failure scenarios.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In old version of parted like parted-2.1-25, error message is shown in
stdout when printing a disk info without disk label.
Error: /dev/sda: unrecognised disk label
This line has been moved to stderr in newer version of parted. So we
should check both stdout and stderr when locating this message.
This should fix bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1172468
Signed-off-by: Hao Liu <hliu@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1087104#c5
When trying to use an invalid offset to virStorageVolUpload(), libvirt
fails in virFDStreamOpenFileInternal(), although it seems libvirt does
not check the return in storageVolUpload(), and calls
virFDStreamSetInternalCloseCb() right after. But stream doesn't have a
privateData (is NULL) yet, and the daemon crashes then.
0 0x00007f09429a9c10 in pthread_mutex_lock () from /lib64/libpthread.so.0
1 0x00007f094514dbf5 in virMutexLock (m=<optimized out>) at util/virthread.c:88
2 0x00007f09451cb211 in virFDStreamSetInternalCloseCb at fdstream.c:795
3 0x00007f092ff2c9eb in storageVolUpload at storage/storage_driver.c:2098
4 0x00007f09451f46e0 in virStorageVolUpload at libvirt.c:14000
5 0x00007f0945c78fa1 in remoteDispatchStorageVolUpload at remote_dispatch.h:14339
6 remoteDispatchStorageVolUploadHelper at remote_dispatch.h:14309
7 0x00007f094524a192 in virNetServerProgramDispatchCall at rpc/virnetserverprogram.c:437
Signed-off-by: Luyao Huang <lhuang@redhat.com>
While this could be exposed as a public API, it's not done yet as
there's no demand for that yet. Anyway, this is just preparing
the environment for easier volume creation on the destination.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since virSecretFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virStoragePoolFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virStorageVolFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
https://bugzilla.redhat.com/show_bug.cgi?id=1159180
The virStoragePoolSourceFindDuplicate only checks the incoming definition
against the same type of pool as the def; however, for "scsi_host" and
"fc_host" adapter pools, it's possible that either some pool "scsi_host"
adapter definition is already using the scsi_hostN that the "fc_host"
adapter definition wants to use or some "fc_host" pool adapter definition
is using a vHBA scsi_hostN or parent scsi_hostN that an incoming "scsi_host"
definition is trying to use.
This patch adds the mismatched type checks and adds extraneous comments
to describe what each check is determining.
This patch also modifies the documentation to be describe what scsi_hostN
devices a "scsi_host" source adapter should use and which to avoid. It also
updates the parent definition to specifically call out that for mixed
environments it's better to define which parent to use so that the duplicate
pool checks can be done properly.
https://bugzilla.redhat.com/show_bug.cgi?id=1159180
Move the API from the backend to storage_conf and rename it to
virStoragePoolGetVhbaSCSIHostParent. A future patch will need to
use this functionality from storage_conf
https://bugzilla.redhat.com/show_bug.cgi?id=1152382
When libvirt create's the vport (VPORT_CREATE) for the vHBA, there isn't
enough "time" between the creation and the running of the following
backend->refreshPool after a backend->startPool in order to find the LU's.
Population of LU's happens asynchronously when udevEventHandleCallback
discovers the "new" vHBA port. Creation of the infrastructure by udev
is an iterative process creating and discovering actual storage devices and
adjusting the environment.
Because of the time it takes to discover and set things up, the backend
refreshPool call done after the startPool call will generally fail to
find any devices. This leaves the newly started pool appear empty when
querying via 'vol-list' after startup. The "workaround" has always been
to run pool-refresh after startup (or any time thereafter) in order to
find the LU's. Depending on how quickly run after startup, this too may
not find any LUs in the pool. Eventually though given enough time and
retries it will find something if LU's exist for the vHBA.
This patch adds a thread to be executed after the VPORT_CREATE which will
attempt to find the LU's without requiring the external run of refresh-pool.
It does this by waiting for 5 seconds and searching for the LU's. If any
are found, then the thread completes; otherwise, it will retry once more
in another 5 seconds. If none are found in that second pass, the thread
gives up.
Things learned while investigating this... No need to try and fill the
pool too quickly or too many times. Over the course of creation, the udev
code may 'add', 'change', and 'delete' the same device. So if the refresh
code runs and finds something, it may display it only to have a subsequent
refresh appear to "lose" the device. The udev processing doesn't seem to
have a way to indicate that it's all done with the creation processing of a
newly found vHBA. Only the Lone Ranger has silver bullets to fix everything.
Fix a problem in the getBlockDevice and processLU where retval initialized
to zero causing some failures to erroneously continue through to the
virStorageBackendSCSINewLun with an attempt to find a path for "/dev/(null)".
This would fail approximately 10 seconds later with debug message:
virStorageBackendSCSINewLun:203 :
No stable path found for '/dev/(null)' in '/dev/disk/by-path'
The root cause of the issue is for many /sys/bus/scsi/devices/<lun path>
there is no "block*" device found for the vHBA's, where "<lun path>" are
the various paths created for the vHBA, such as "17:0:0:0", "17:0:1:0",
"17:0:2:0", "17:0:3:0", etc. If the block device isn't found, then the
directory should just be ignored rather than attempting to process it.
The bug was that in getBlockDevice the assumption was "block" would exist
and either getNewStyleBlockDevice or getOldStyleBlockDevice would fill in
@block_device. However, if 'block*' doesn't exist, then the code returned
NULL for block_device *and* a good (zero) retval value. This caused the
processLU code to attempt the virStorageBackendSCSINewLun which failed
"at some point in time" in the future.
After this change - on test system the refresh-pool didn't have a noticable
pause of about 20 seconds - it completed within a second since no longer
was there an attempt/need to find "/dev/(null)".
Additionally, the virStorageBackendSCSIFindLU's shouldn't be declaring
found unless the processLU actually returns success. This will be
important in the followup patch which relies on whether a LU was found.
https://bugzilla.redhat.com/show_bug.cgi?id=1160926
Introduce a 'managed' attribute to allow libvirt to decide whether to
delete a vHBA vport created via external means such as nodedev-create.
The code currently decides whether to delete the vHBA based solely on
whether the parent was provided at creation time. However, that may not
be the desired action, so rather than delete and force someone to create
another vHBA via an additional nodedev-create allow the configuration of
the storage pool to decide the desired action.
During createVport when libvirt does the VPORT_CREATE, set the managed
value to YES if not already set to indicate to the deleteVport code that
it should delete the vHBA when the pool is destroyed.
If libvirtd is restarted all the memory only state was lost, so for a
persistent storage pool, use the virStoragePoolSaveConfig in order to
write out the managed value.
Because we're now saving the current configuration, we need to be sure
to not save the parent in the output XML if it was undefined at start.
Saving the name would cause future starts to always use the same parent
which is not the expected result when not providing a parent. By not
providing a parent, libvirt is expected to find the best available
vHBA port for each subsequent (re)start.
At deleteVport, use the new managed value to decide whether to execute
the VPORT_DELETE. Since we no longer save the parent in memory or in
XML when provided, if it was not provided, then we have to look it up.
https://bugzilla.redhat.com/show_bug.cgi?id=1160926
Passing a copy of the storage pool adapter to a function just changes the
copy of the fields in the particular function and then when returning to
the caller those changes are discarded. While not yet biting us in the
storage clean-up case, it did cause an issue for the fchost storage pool
startup case, createVport. The issue was at startup, if no parent is found
in the XML, the code will search for the 'best available' parent and then
store that in the in memory copy of the adapter. Of course, in this case
it was a copy, so when returning to the virStorageBackendSCSIStartPool that
change was discarded (or lost) from the pool->def->source.adapter which
meant at shutdown (deleteVport), the code assumed no adapter was passed
and skipped the deletion, leaving the vHBA created by libvirt still defined
requiring an additional stop of a nodedev-destroy to remove.
Adjusted the createVport to take virStoragePoolDefPtr instead of the
adapter copy. Then use the virStoragePoolSourceAdapterPtr when processing.
A future patch will need the 'def' anyway, so this just sets up for that.
https://bugzilla.redhat.com/show_bug.cgi?id=1160565
The existing code assumed that the configuration of a 'parent' attribute
was correct for the createVport path. As it turns out, that may not be
the case which leads errors during the deleteVport path because the
wwnn/wwpn isn't associated with the parent.
With this change the following is reported:
error: Failed to start pool fc_pool_host3
error: XML error: Parent attribute 'scsi_host4' does not match parent 'scsi_host3' determined for the 'scsi_host16' wwnn/wwpn lookup.
for XML as follows:
<pool type='scsi'>
<name>fc_pool</name>
<source>
<adapter type='fc_host' parent='scsi_host4' wwnn='5001a4aaf3ca174b' wwpn='5001a4a77192b864'/>
</source>
Where 'nodedev-dumpxml scsi_host16' provides:
<device>
<name>scsi_host16</name>
<path>/sys/devices/pci0000:00/0000:00:04.0/0000:10:00.0/host3/vport-3:0-11/host16</path>
<parent>scsi_host3</parent>
<capability type='scsi_host'>
<host>16</host>
<unique_id>13</unique_id>
<capability type='fc_host'>
<wwnn>5001a4aaf3ca174b</wwnn>
<wwpn>5001a4a77192b864</wwpn>
...
The patch also adjusts the description of the storage pool to describe the
restrictions.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1160565
If a 'parent' attribute is provided for the fchost, then at startup
time check to ensure it is a vport capable scsi_host. If the parent
is not vport capable, then disallow the startup. The following is the
expected results:
error: Failed to start pool fc_pool
error: XML error: parent 'scsi_host2' specified for vHBA is not vport capable
where the XML for the fc_pool is:
<pool type='scsi'>
<name>fc_pool</name>
<source>
<adapter type='fc_host' parent='scsi_host2' wwnn='5001a4aaf3ca174b' wwpn='5001a4a77192b864'/>
</source>
...
and 'scsi_host2' is not vport capable.
Providing an incorrect parent and a correct wwnn/wwpn could lead to
failures at shutdown (deleteVport) where the assumption is the parent
is for the fchost.
NOTE: If the provided wwnn/wwpn doesn't resolve to an existing scsi_host,
then we will be creating one with code (virManageVport) which
assumes the parent is vport capable.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The shared storage driver is stateful and inside the daemon so
there is no need to use the storagePrivateData field to get the
driver handle. Just access the global driver handle directly.
Add a new parameter to virStorageFileGetMetadata that will break the
backing chain detection process and report useful error message rather
than having to use virStorageFileChainGetBroken.
This patch just introduces the option, usage will be provided
separately.
- Provide an implementation for buildPool and deletePool operations
for the ZFS storage backend.
- Add VIR_STORAGE_POOL_SOURCE_DEVICE flag to ZFS pool poolOptions
as now we can specify devices to build pool from
- storagepool.rng: add an optional 'sourceinfodev' to 'sourcezfs' and
add an optional 'target' to 'poolzfs' entity
- Add a couple of tests to storagepoolxml2xmltest
Coverity complains that when multiplying to 32 bit values that eventually
will be stored in a 64 bit value that it's possible the math could
overflow unless one of the values being multiplied is type cast to
the proper size.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since cd4d547576
Coverity notes that setting 'ret = -3' prior to the unconditional
setting of 'ret = 0' will cause the value to be UNUSED.
Since the comment indicates that it is expect to allow the code
to continue, just remove the ret = -3 setting.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Currently, after calling commands to create a new volumes,
virStorageBackendZFSCreateVol calls virStorageBackendZFSFindVols that
calls virStorageBackendZFSParseVol.
virStorageBackendZFSParseVol checks if a volume already exists by
trying to get it using virStorageVolDefFindByName.
For a just created volume it returns NULL, so volume is reported as
new and appended to pool->volumes. This causes a volume to be listed
twice as storageVolCreateXML appends this new volume to the list as
well.
Fix that by passing a new volume definition to
virStorageBackendZFSParseVol so it could determine if it needs to add
this volume to the list.
There were two occurrances of attempting to initialize actualType by
calling virStorageSourceGetActualType(src) prior to a check if (!src)
resulting in Coverity complaining about the possible NULL dereference
in virStorageSourceGetActualType() of src.
Resolve by moving the actualType setting until after checking !src
virStorageBackendVolDownloadLocal and virStorageBackendVolUploadLocal
use virFDStreamOpenFile function to work with the volume fd.
virFDStreamOpenFile calls virFDStreamOpenFileInternal that implements
handling of the non-blocking I/O. If a file is not a character device and
not a fifo, it uses libvirt_iohelper.
On FreeBSD, it doesn't work as expected because disk devices (including
ZFS volumes) are exposed as character devices, and ZFS volumes do not
support open(2) with O_NONBLOCK.
To overcome this, introduce a forceIOHelper flag to
virFDStreamOpenFileInternal that forces using libvirt_iohelper. And
introduce virFDStreamOpenBlockDevice that calls
virFDStreamOpenFileInternal with the forceIOHelper set to true.
On some places in the libvirt code we have:
f(a,z)
instead of
f(a, z)
This trivial patch fixes couple of such occurrences.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, qemu driver uses qemuTranslateDiskSourcePool()
to translate disk volume information. This function is
general enough and could be used for other drivers as well,
so move it to conf/domain_conf.c along with its helpers.
- qemuTranslateDiskSourcePool: move to storage/storage_driver.c
and rename to virStorageTranslateDiskSourcePool,
- qemuAddISCSIPoolSourceHost: move to storage/storage_driver.c
and rename to virStorageAddISCSIPoolSourceHost,
- qemuTranslateDiskSourcePoolAuth: move to storage/storage_driver.c
and rename to virStorageTranslateDiskSourcePoolAuth,
- Update users of qemuTranslateDiskSourcePool to use a
new name.
Implement ZFS storage backend driver. Currently supported
only on FreeBSD because of ZFS limitations on Linux.
Features supported:
- pool-start, pool-stop
- pool-info
- vol-list
- vol-create / vol-delete
Pool definition looks like that:
<pool type='zfs'>
<name>myzfspool</name>
<source>
<name>actualpoolname</name>
</source>
</pool>
The 'actualpoolname' value is a name of the pool on the system,
such as shown by 'zpool list' command. Target makes no sense
here because volumes path is always /dev/zvol/$poolname/$volname.
User has to create a pool on his own, this driver doesn't
support pool creation currently.
A volume could be used with Qemu by adding an entry like this:
<disk type='volume' device='disk'>
<driver name='qemu' type='raw'/>
<source pool='myzfspool' volume='vol5'/>
<target dev='hdc' bus='ide'/>
</disk>
https://bugzilla.redhat.com/show_bug.cgi?id=1072653
Upon successful upload of a volume, the target volume and storage pool
were not updated to reflect any changes as a result of the upload. Make
use of the existing stream close callback mechanism to force a backend
pool refresh to occur in a separate thread once the stream closes. The
separate thread should avoid potential deadlocks if the refresh needed
to wait on some event from the event loop which is used to perform
the stream callback.
Use correct mode when pre-creating files (for snapshots). The refactor
changing to storage driver usage caused a regression as some systems
created the file with 000 permissions forbidding qemu to write the file.
Pass mode to the creating functions to avoid the problem.
Regression since 185e07a5f8.
With my intended use of storage driver assist to chown files on remote
storage we will need a witness that will tell us whether the given
storage volume supports operations needed by the storage driver.
Gluster storage works on a similar principle to NFS where it takes the
uid and gid of the actual process and uses it to access the storage
volume on the remote server. This introduces a need to chown storage
files on gluster via native API.
virStorageBackendLogicalCreateVol contains a piece like:
if (vol->target.path != NULL) {
/* A target path passed to CreateVol has no meaning */
VIR_FREE(vol->target.path);
}
The 'if' is useless here, but 'syntax-check' doesn't catch that
because of the comment, so drop the 'if'.
If a parentaddr was provided in the XML, have getAdapterName lookup
the stable address. This allows virStorageBackendSCSICheckPool() and
virStorageBackendSCSIRefreshPool() to automagically find the scsi_host
by its PCI address and unique_id
Rather than assume that NOT FC_HOST is SCSI_HOST, let's call them out
specifically. Makes it easier to find SCSI_HOST code/structs and ensures
something isn't missed in the future
https://bugzilla.redhat.com/show_bug.cgi?id=1091866
Add a new boolean 'sparse'. This will be used by the logical backend
storage driver to determine whether the target volume is sparse or not
(also known by a snapshot or thin logical volume). Although setting sparse
to true at creation could be seen as duplicitous to setting during
virStorageBackendLogicalMakeVol() in case there are ever other code paths
between Create and FindLVs that need to know about the volume be sparse.
Use the 'sparse' in a new virStorageBackendLogicalVolWipe() to decide whether
to attempt to wipe the logical volume or not. For now, I have found no
means to wipe the volume without writing to it. Writing to the sparse
volume causes it to be filled. A sparse logical volume is not completely
writeable as there exists metadata which if overwritten will cause the
sparse lv to go INACTIVE which means pool-refresh will not find it.
Access to whatever lvm uses to manage data blocks is not provided by
any API I could find.
Coverity complains about the return value of ioctl not being checked.
Even though we carry on when this fails (just like qemu-img does),
we can log an error.
For non-local storage drivers we can't expect to use the "scrub" tool to
wipe the volume. Split the code into a separate backend function so that
we can add protocol specific code later.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1118710
The next patch will move the storage volume wiping code into the
individual backends. This patch splits out the common code to wipe a
local volume into a separate backend helper so that the next patch is
simpler.
Add 'nocow' to storage volume xml so that user can have an option
to set NOCOW flag to the newly created volume. It's useful on btrfs
file system to enhance performance.
Btrfs has low performance when hosting VM images, even more when the guest
in those VM are also using btrfs as file system. One way to mitigate this
bad performance is to turn off COW attributes on VM files. Generally, there
are two ways to turn off COW on btrfs: a) by mounting fs with nodatacow,
then all newly created files will be NOCOW. b) per file. Add the NOCOW file
attribute. It could only be done to empty or new files.
This patch tries the second way, according to 'nocow' option, it could set
NOCOW flag per file:
for raw file images, handle 'nocow' in libvirt code; for non-raw file images,
pass 'nocow=on' option to qemu-img, and let qemu-img to handle that (requires
qemu-img version >= 2.1).
Signed-off-by: Chunyan Liu <cyliu@suse.com>
When the backing store of a volume wasn't accessible while updating the
volume definition the call would fail altogether. In cases where we
currently (incorrectly) treat remote backing stores as local one this
might lead to strange errors.
Ignore the opening errors until we figure out how to track proper volume
metadata.
Use the backing store parser to properly create the information about a
volume's backing store. Unfortunately as the storage driver isn't
prepared to allow volumes backed by networked filesystems add a
workaround that will avoid changing the XML output.
For non-local storage drivers we can't expect to use the FDStream
backend for up/downloading volumes. Split the code into a separate
backend function so that we can add protocol specific code later.
To allow reusing this function in the qemu driver we need to allow
specifying the storage format. Also separate return of the backing store
path now isn't necessary.
Replace the authType, chap, and cephx unions in virStoragePoolSource
with a single pointer to a virStorageAuthDefPtr. Adjust all users of
the previous chap/cephx and secret unions with the source->auth data.
Replace:
if (virBufferError(&buf)) {
virBufferFreeAndReset(&buf);
virReportOOMError();
...
}
with:
if (virBufferCheckError(&buf) < 0)
...
This should not be a functional change (unless some callers
misused the virBuffer APIs - a different error would be reported
then)
The parent directory doesn't necessarily need to be stored after we
don't mangle the path stored in the image. Remove it and tweak the code
to avoid using it.
Due to various refactors and compatibility with the virstoragetest the
relPath field of the virStorageSource structure was always filled either
with the relative name or the full path in case of absolutely backed
storage. Return its original purpose to store only the relative name of
the disk if it is backed relatively and tweak the tests.
Report VIR_ERR_NO_STORAGE_VOL instead of a system error when lstat
fails because the file doesn't exist.
Fixes this problem in virt-install:
https://bugzilla.redhat.com/show_bug.cgi?id=1108922
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Rework internal pool lookup code to avoid printing the raw UUID buffer
in the case a storage pool can't be found:
$ virsh pool-name e012ace0-0460-5810-39ef-1bce5fa5a4dd
error: failed to get pool 'e012ace0-0460-5810-39ef-1bce5fa5a4dd'
error: Storage pool not found: no storage pool with matching uuid à¬à`X9ï_¥¤Ý
The rework is mostly done by switching the lookup code to the newly
introduced helper virStoragePoolObjFromStoragePool
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1104993
Use the new backing store parser in the backing chain crawler. This
change needs one test change where information about the NBD image are
now parsed differently.
Use virStorageFileReadHeader() to read headers of storage files possibly
on remote storage to retrieve the image metadata.
The backend information is now parsed by
virStorageFileGetMetadataInternal which is now exported from the util
source and virStorageFileGetMetadataFromFDInternal now doesn't need to
be exported.
Use the virStorageFileGetUniqueIdentifier() function to get a unique
identifier regardless of the target storage type instead of relying on
canonicalize_path().
A new function that checks whether we support a given image is
introduced to avoid errors for unimplemented backends.
Add a new function wrapper and tweak the storage file backend lookup
function so that it can be used without reporting error. This will be
useful in the metadata crawler code where we need silently break if
metadata retrieval is not supported for the current storage type.
When walking the backing chain we previously set the storage type to
_FILE and let the virStorageFileGetMetadataFromFDInternal update it to
the correct type later on.
This patch moves the actual storage type determination to the place
where we parse the backing store name so that the code can later be
switched to use virStorageFileReadHeader() directly.
My future work will modify the metadata crawler function to use the
storage driver file APIs to access the files instead of accessing them
directly so that we will be able to request the metadata for remote
files too. To avoid linking the storage driver to every helper file
using the utils code, the backing chain traversal function needs to be
moved to the storage driver source.
Additionally the virt-aa-helper and virstoragetest programs need to be
linked with the storage driver as a result of this change.
Different protocols have different means to uniquely identify a storage
file. This patch implements a storage driver API to retrieve a unique
string describing a volume. The current implementation works for local
storage only and returns the canonical path of the volume.
To add caching support the local filesystem driver now has a private
structure holding the cached string, which is created only when it's
initially accessed.
This patch provides the implementation for local files only for start.
Use virStorageFileGetMetadataFromFD instead in
virStorageBackendProbeTarget as it now returns all required data and the
storage file is already open in a filedescriptor.
Also fix improper error code being returned when virFileReadHeaderFD
would fail as virStorageBackendUpdateVolTargetInfoFD would set the
return code to 0.
Add storage driver based functions to access headers of storage files
for metadata extraction. Along with this patch a local filesystem and
gluster via libgfapi implementation is provided. The gluster
implementation is based on code of the saferead_lim function.
To allow using the storage driver APIs to access files on various
storage sources in a universal fashion possibly on storage such as nfs
with root squash we'll need to store the desired uid/gid in the
metadata.
Add new initialisation API that will store the desired uid/gid and a
wrapper for the current use. Additionally add docs for the two APIs.
Print the debug statements of individual file access functions from the
main API functions instead of the individual backend functions.
Also enhance initialization debug messages on a per-backend basis.
The gluster volume name was previously stored as part of the source path
string. This is unfortunate when we want to do operations on the path as
the volume is used separately.
Parse and store the volume name separately for gluster storage volumes
and use the newly stored variable appropriately.
The VIR_ENUM_DECL/VIR_ENUM_IMPL helper macros already append 'Type'
to the enum name being converted; it looks silly to have functions
with 'TypeType' in their name. Even though some of our enums have
to have a 'Type' suffix, the corresponding string conversion
functions do not.
* src/conf/secret_conf.h (VIR_ENUM_DECL): Rename virSecretUsageType.
* src/conf/storage_conf.h (VIR_ENUM_DECL): Rename
virStoragePoolAuthType, virStoragePoolSourceAdapterType,
virStoragePartedFsType.
* src/conf/domain_conf.c (virDomainDiskDefParseXML)
(virDomainFSDefParseXML, virDomainFSDefFormat): Update callers.
* src/conf/secret_conf.c (virSecretDefParseUsage)
(virSecretDefFormatUsage): Likewise.
* src/conf/storage_conf.c (virStoragePoolDefParseAuth)
(virStoragePoolDefParseSource, virStoragePoolSourceFormat):
Likewise.
* src/lxc/lxc_controller.c (virLXCControllerSetupLoopDevices):
Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskPartFormat): Likewise.
* src/util/virstorageencryption.c (virStorageEncryptionSecretParse)
(virStorageEncryptionSecretFormat): Likewise.
* tools/virsh-secret.c (cmdSecretList): Likewise.
* src/libvirt_private.syms (secret_conf.h, storage_conf.h): Export
corrected names.
Signed-off-by: Eric Blake <eblake@redhat.com>
In "src/conf/" there are many enumeration (enum) declarations.
Similar to the recent cleanup to "src/util" directory, it's
better to use a typedef for variable types, function types and
other usages. Other enumeration and folders will be changed to
typedef's in the future. Most of the files changed in this
commit are related to storage (storage_conf) enums.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1092882
Refactoring in commit id '0c2305b3' resulted in the wrong storage
volume object being passed to the new storageVolDeleteInternal().
It should have passed 'voldef' which is the address found in the
pool->volumes.objs[i] array. By passing 'voldef', the DeleteInternal
code will find and remove the voldef from the volumes.objs[] list.
When creating a new volume, it is possible to copy data into it from
another already existing volume (referred to as @origvol). Obviously,
the read-only access to @origvol is required, which is thread safe
(probably not performance-wise though). However, with current code
both @newvol and @origvol are marked as building for the time of
copying data from the @origvol to @newvol. The rationale behind
is to disallow some operations on both @origvol and @newvol, e.g.
vol-wipe, vol-delete, vol-download. While it makes sense to not allow
such operations on partly copied mirror, but it doesn't make sense to
disallow vol-create or vol-download on the source (@origvol).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In "src/util/" there are many enumeration (enum) declarations.
Sometimes, it's better using a typedef for variable types,
function types and other usages. Other enumeration will be
changed to typedef's in the future.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
All callers of virStorageFileGetMetadataFromBuf were first calling
virStorageFileProbeFormatFromBuf, to learn what format to pass in.
But this function is already wired to do the exact same probe if
the incoming format is VIR_STORAGE_FILE_AUTO, so it's simpler to
just refactor the probing into the central function.
* src/util/virstoragefile.h (virStorageFileGetMetadataFromBuf):
Drop parameter.
(virStorageFileProbeFormatFromBuf): Drop declaration.
* src/util/virstoragefile.c (virStorageFileGetMetadataFromBuf):
Do probe here instead of in callers.
(virStorageFileProbeFormatFromBuf): Make static.
* src/libvirt_private.syms (virstoragefile.h): Drop function.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Update caller.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit id 'ac9a0963' refactored out the 'withCapacity' for the
virStorageBackendUpdateVolInfo() API. See:
http://www.redhat.com/archives/libvir-list/2014-April/msg00043.html
This resulted in a difference in how 'virsh vol-info --pool <poolName>
<volume>' or 'virsh vol-list vol-list --pool <poolName> --details' outputs
the capacity information for a directory pool with a qcow2 sparse file.
For example, using the following XML
mkdir /home/TestPool
cat testpool.xml
<pool type='dir'>
<name>TestPool</name>
<uuid>6bf80895-10b6-75a6-6059-89fdea2aefb7</uuid>
<source>
</source>
<target>
<path>/home/TestPool</path>
<permissions>
<mode>0755</mode>
<owner>0</owner>
<group>0</group>
</permissions>
</target>
</pool>
virsh pool-create testpool.xml
virsh vol-create-as --pool TestPool temp_vol_1 \
--capacity 1048576 --allocation 1048576 --format qcow2
virsh vol-info --pool TestPool temp_vol_1
Results in listing a Capacity value. Prior to the commit, the value would
be '1.0 MiB' (1048576 bytes). However, after the commit the output would be
(for example) '192.50 KiB', which for my system was the size of the volume
in my file system (eg 'ls -l TestPool/temp_vol_1' results in '197120' bytes
or 192.50 KiB). While perhaps technically correct, it's not necessarily
what the user expected (certainly virt-test didn't expect it).
This patch restores the code to not update the target capacity for this path
The stripe_unit and stripe_count arguments are passed to rbd_create3 in
the wrong order, resulting in a stripe size of 1 byte with 4194304
stripes on newly created RBD volumes.
https://bugzilla.redhat.com/show_bug.cgi?id=1092208
Signed-off-by: Steven McDonald <steven.mcdonald@anchor.net.au>
More instances of failure to report (unlikely) readdir errors.
In one case, I chose to ignore them, given that a readdir error
would be no different than timing out on the loop, where the
fallback path behaves correctly either way.
* src/storage/storage_backend.c (virStorageBackendStablePath):
Ignore readdir errors.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemRefresh): Report readdir errors.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSIGetHostNumber): Likewise.
* src/storage/storage_backend_scsi.c (getNewStyleBlockDevice)
(getBlockDevice, virStorageBackendSCSIFindLUs): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Instead of hardcoding LIBEXECDIR as the location of the libvirt_parthelper
binary, use virFileFindResource to optionally find it in the current
build directory.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit id '18642d10' caused a virt-test regression for NFS backend
storage error path checks when running the command:
'virsh find-storage-pool-sources-as netfs Unknown '
when the host did not have Gluster installed. Prior to the commit,
the test would fail with the error:
error: internal error: Child process (/usr/sbin/showmount --no-headers
--exports Unknown) unexpected exit status 1: clnt_create: RPC: Unknown host
After the commit, the error would be ignored, the call would succeed,
and an empty list of pool sources returned. This was tucked into the
commit message as an expected outcome.
When the target host does not have a GLUSTER_CLI this is a regression
over the previous release. Furthermore, even if Gluster CLI was present,
but had a failure to get devices, the API would return a failure even if
the NFS backend had found devices.
Modify the logic to return failure when the NFS backend check fails and
there's no GLUSTER_CLI or when both backend checks fail.
If either returns success and GLUSTER_CLI is defined, then fetch and return
a list of source devices even if it's empty
A couple pieces of virStorageFileMetadata are used only while
collecting information about the chain, and don't need to
live permanently in the struct. This patch refactors external
callers to collect the information separately, so that the
next patch can remove the fields.
* src/util/virstoragefile.h (virStorageFileGetMetadataFromBuf):
Alter signature.
* src/util/virstoragefile.c (virStorageFileGetMetadataInternal):
Likewise.
(virStorageFileGetMetadataFromFDInternal): Adjust callers.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Deciding if a user string represents a local file instead of a
network path is an operation worth exposing directly, particularly
since the next patch will be removing a redundant variable that
was caching the information.
* src/util/virstoragefile.h (virStorageIsFile): New declaration.
* src/util/virstoragefile.c (virBackingStoreIsFile): Rename...
(virStorageIsFile): ...export, and allow NULL input.
(virStorageFileGetMetadataInternal)
(virStorageFileGetMetadataRecurse, virStorageFileGetMetadata):
Update callers.
* src/conf/domain_conf.c (virDomainDiskDefForeachPath): Use it.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
* src/libvirt_private.syms (virstoragefile.h): Export function.
Signed-off-by: Eric Blake <eblake@redhat.com>
Now that we store all metadata about a storage image in a
virStorageSource struct let's use it also to store information needed by
the storage driver to access and do operations on the files.
https://bugzilla.redhat.com/show_bug.cgi?id=1024159
If adding a volume to a storage pool fails during the CreateXML or
CreateXMLFrom API's, we don't want to adjust the available and
allocation values for the storage pool during storageVolDelete
since we haven't adjusted the values for the create.
Refactor storageVolDelete() a bit to create a storageVolDeleteInternal()
which will handle the primary deletion activities. Add a parameter
updateMeta which will signify whether to update the values or not.
Adjust the calls from CreateXML and CreateXMLFrom to directly call the
DeleteInternal with the pool lock held. This does bypass the call
to virStorageVolDeleteEnsureACL().
Commit id '18642d10' refactored the call to virCommandRunRegex()
inside a new function virStorageBackendFileSystemNetFindNFSPoolSources(),
but the cut-n-paste didn't remove the "&state". Now that state is passed
by reference, it results in a libvirtd core with a messages entry:
"...internal error: unknown storage pool type Unknow"
Currently VolOpen notifies the user of a potentially non-fatal failure by
returning -2 and logging a VIR_WARN or VIR_INFO. Unfortunately most
callers treat -2 as fatal but don't actually report any message with
the error APIs.
Rename the VOL_OPEN_ERROR flag to VOL_OPEN_NOERROR. If NOERROR is specified,
we preserve the current behavior of returning -2 (there's only one caller
that wants this).
However in the default case, only return -1, and actually use the error
APIs. Fix up a couple callers as a result.
A future patch will merge virStorageFileMetadata and virStorageSource,
but I found it easier to do if both structs use the same information
for tracking whether a source file needs encryption keys.
* src/util/virstoragefile.h (_virStorageFileMetadata): Prepare
full encryption struct instead of just a bool.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Use transfer semantics.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Likewise.
* src/util/virstoragefile.c (virStorageFileGetMetadataInternal):
Populate struct.
(virStorageFileFreeMetadata): Adjust clients.
* tests/virstoragetest.c (testStorageChain): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Now that each virStorageSource can track allocation information,
and given that we already have the information without extra
syscalls, it's easier to just always populate the information
directly into the struct than it is to sometimes pass the address
of the struct members down the call chain.
* src/storage/storage_backend.h (virStorageBackendUpdateVolInfo)
(virStorageBackendUpdateVolTargetInfo)
(virStorageBackendUpdateVolTargetInfoFD): Update signature.
* src/storage/storage_backend.c (virStorageBackendUpdateVolInfo)
(virStorageBackendUpdateVolTargetInfo)
(virStorageBackendUpdateVolTargetInfoFD): Always populate struct
members instead.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskMakeDataVol): Update client.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget)
(virStorageBackendFileSystemRefresh)
(virStorageBackendFileSystemVolRefresh): Likewise.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Likewise.
* src/storage/storage_backend_logical.c
(virStorageBackendLogicalMakeVol): Likewise.
* src/storage/storage_backend_mpath.c
(virStorageBackendMpathNewVol): Likewise.
* src/storage/storage_backend_scsi.c
(virStorageBackendSCSINewLun): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
One of the features of qcow2 is that a wrapper file can have
more capacity than its backing file from the guest's perspective;
what's more, sparse files make tracking allocation of both
the active and backing file worthwhile. As such, it makes
more sense to show allocation numbers for each file in a chain,
and not just the top-level file. This sets up the fields for
the tracking, although it does not modify XML to display any
new information.
* src/util/virstoragefile.h (_virStorageSource): Add fields.
* src/conf/storage_conf.h (_virStorageVolDef): Drop redundant
fields.
* src/storage/storage_backend.c (virStorageBackendCreateBlockFrom)
(createRawFile, virStorageBackendCreateQemuImgCmd)
(virStorageBackendCreateQcowCreate): Update clients.
* src/storage/storage_driver.c (storageVolDelete)
(storageVolCreateXML, storageVolCreateXMLFrom, storageVolResize)
(storageVolWipeInternal, storageVolGetInfo): Likewise.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget)
(virStorageBackendFileSystemRefresh)
(virStorageBackendFileSystemVolResize)
(virStorageBackendFileSystemVolRefresh): Likewise.
* src/storage/storage_backend_logical.c
(virStorageBackendLogicalMakeVol)
(virStorageBackendLogicalCreateVol): Likewise.
* src/storage/storage_backend_scsi.c
(virStorageBackendSCSINewLun): Likewise.
* src/storage/storage_backend_mpath.c
(virStorageBackendMpathNewVol): Likewise.
* src/storage/storage_backend_rbd.c
(volStorageBackendRBDRefreshVolInfo)
(virStorageBackendRBDCreateImage): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskMakeDataVol)
(virStorageBackendDiskCreateVol): Likewise.
* src/storage/storage_backend_sheepdog.c
(virStorageBackendSheepdogBuildVol)
(virStorageBackendSheepdogParseVdiList): Likewise.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Likewise.
* src/conf/storage_conf.c (virStorageVolDefFormat)
(virStorageVolDefParseXML): Likewise.
* src/test/test_driver.c (testOpenVolumesForPool)
(testStorageVolCreateXML, testStorageVolCreateXMLFrom)
(testStorageVolDelete, testStorageVolGetInfo): Likewise.
* src/esx/esx_storage_backend_iscsi.c (esxStorageVolGetXMLDesc):
Likewise.
* src/esx/esx_storage_backend_vmfs.c (esxStorageVolGetXMLDesc)
(esxStorageVolCreateXML): Likewise.
* src/parallels/parallels_driver.c (parallelsAddHddByVolume):
Likewise.
* src/parallels/parallels_storage.c (parallelsDiskDescParseNode)
(parallelsStorageVolDefineXML, parallelsStorageVolCreateXMLFrom)
(parallelsStorageVolDefRemove, parallelsStorageVolGetInfo):
Likewise.
* src/vbox/vbox_tmpl.c (vboxStorageVolCreateXML)
(vboxStorageVolGetXMLDesc): Likewise.
* tests/storagebackendsheepdogtest.c (test_vdi_list_parser):
Likewise.
* src/phyp/phyp_driver.c (phypStorageVolCreateXML): Likewise.
A fairly smooth transition. And now that domain disks and
storage volumes share a common struct, it opens the doors for
a future patch to expose more details in the XML for both
objects.
* src/conf/storage_conf.h (_virStorageVolTarget): Delete.
(_virStorageVolDef): Use common type.
* src/conf/storage_conf.c (virStorageVolDefFree)
(virStorageVolTargetDefFormat): Update clients.
* src/storage/storage_backend.h: Likewise.
* src/storage/storage_backend.c
(virStorageBackendDetectBlockVolFormatFD)
(virStorageBackendUpdateVolTargetInfo)
(virStorageBackendUpdateVolTargetInfoFD): Likewise.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Some preparatory work before consolidating storage volume
structs with the rest of virstoragefile. Making these
changes allows a volume target to be much closer to (a
subset of) the virStorageSource struct.
Making perms be a pointer allows it to be optional if we
have a storage pool that doesn't expose permissions in a
way we can access. It also allows future patches to
optionally expose permissions details learned about a disk
image via domain <disk> listings, rather than just
limiting it to storage volume listings.
Disk partition types was only used by internal code to
control what type of partition to create when carving up
an MS-DOS partition table storage pool (and is not used
for GPT partition tables or other storage pools). It was
not exposed in volume XML, and as it is more closely
related to extent information of the overall block device
than it is to the <target> information describing the host
file. Besides, if we ever decide to expose it in XML down
the road, we can move it back as needed.
* src/conf/storage_conf.h (_virStorageVolTarget): Change perms to
pointer, enhance comments. Move partition type...
(_virStorageVolSource): ...here.
* src/conf/storage_conf.c (virStorageVolDefFree)
(virStorageVolDefParseXML, virStorageVolTargetDefFormat): Update
clients.
* src/storage/storage_backend_fs.c (createFileDir): Likewise.
* src/storage/storage_backend.c (virStorageBackendCreateBlockFrom)
(virStorageBackendCreateRaw, virStorageBackendCreateExecCommand)
(virStorageBackendUpdateVolTargetInfoFD): Likewise.
* src/storage/storage_backend_logical.c
(virStorageBackendLogicalCreateVol): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskMakeDataVol)
(virStorageBackendDiskPartTypeToCreate): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Noticed during my work on storage struct cleanups.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskPartBoundaries): Fix spelling errors.
Signed-off-by: Eric Blake <eblake@redhat.com>
Now that we have a common struct, it's time to start using it!
Since external snapshots make a longer backing chain, it is
only natural to use the same struct for the file created by
the snapshot as what we use for <domain> disks.
* src/conf/snapshot_conf.h (_virDomainSnapshotDiskDef): Use common
struct instead of open-coded duplicate fields.
* src/conf/snapshot_conf.c (virDomainSnapshotDiskDefClear)
(virDomainSnapshotDiskDefParseXML, virDomainSnapshotAlignDisks)
(virDomainSnapshotDiskDefFormat)
(virDomainSnapshotDiskGetActualType): Adjust clients.
* src/qemu/qemu_conf.c (qemuTranslateSnapshotDiskSourcePool):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiskGetSourceString)
(qemuDomainSnapshotCreateInactiveExternal)
(qemuDomainSnapshotPrepareDiskExternalOverlayActive)
(qemuDomainSnapshotPrepareDiskExternal)
(qemuDomainSnapshotPrepare)
(qemuDomainSnapshotCreateSingleDiskActive): Likewise.
* src/storage/storage_driver.c
(virStorageFileInitFromSnapshotDef): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1072714
Use the "gluster" command line tool to retrieve information about remote
volumes on a gluster server to allow storage pool source lookup.
Unfortunately gluster doesn't provide a management library so that we
could use that directly, instead the RPC calls are hardcoded in the
command line tool.
Extract the NFS related stuff into a separate function and tidy up the
rest of the code so we can reuse it to add gluster backend detection.
Additionally avoid reporting of errors from "showmount" and return an
empty source list instead. This will help when adding other detection
backends.
According to our documentation the "key" value has the following
meaning: "Providing an identifier for the volume which identifies a
single volume." The currently used keys for gluster volumes consist of
the gluster volume name and file path. This can't be considered unique
as a different storage server can serve a volume with the same name.
Unfortunately I wasn't able to figure out a way to retrieve the gluster
volume UUID which would avoid the possibility of having two distinct
keys identifying a single volume.
Use the full URI as the key for the volume to avoid the more critical
ambiguity problem and document the possible change to UUID.
The libgfapi function glfs_fini doesn't tolerate NULL pointers. Add a
check on the error paths as it's possible to crash libvirtd if the
gluster volume can't be initialized.
It's finally time to start tracking disk backing chains in
<domain> XML. The first step is to start refactoring code
so that we have an object more convenient for representing
each host source resource in the context of a single guest
<disk>. Ultimately, I plan to move the new type into src/util
where it can be reused by virStorageFile, but to make the
transition easier to review, this patch just creates the
new type then fixes everything until it compiles again.
* src/conf/domain_conf.h (_virDomainDiskDef): Split...
(_virDomainDiskSourceDef): ...to new struct.
(virDomainDiskAuthClear): Use new type.
* src/conf/domain_conf.c (virDomainDiskDefFree): Split...
(virDomainDiskSourceDefClear): ...to new function.
(virDomainDiskGetType, virDomainDiskSetType)
(virDomainDiskGetSource, virDomainDiskSetSource)
(virDomainDiskGetDriver, virDomainDiskSetDriver)
(virDomainDiskGetFormat, virDomainDiskSetFormat)
(virDomainDiskAuthClear, virDomainDiskGetActualType)
(virDomainDiskDefParseXML, virDomainDiskSourceDefFormat)
(virDomainDiskDefFormat, virDomainDiskDefForeachPath)
(virDomainDiskDefGetSecurityLabelDef)
(virDomainDiskSourceIsBlockType): Adjust all users.
* src/lxc/lxc_controller.c (virLXCControllerSetupDisk):
Likewise.
* src/lxc/lxc_driver.c (lxcDomainAttachDeviceMknodHelper):
Likewise.
* src/qemu/qemu_command.c (qemuAddRBDHost, qemuParseRBDString)
(qemuParseDriveURIString, qemuParseGlusterString)
(qemuParseISCSIString, qemuParseNBDString)
(qemuDomainDiskGetSourceString, qemuBuildDriveStr)
(qemuBuildCommandLine, qemuParseCommandLineDisk)
(qemuParseCommandLine): Likewise.
* src/qemu/qemu_conf.c (qemuCheckSharedDevice)
(qemuAddISCSIPoolSourceHost, qemuTranslateDiskSourcePool):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainUpdateDeviceConfig)
(qemuDomainPrepareDiskChainElement)
(qemuDomainSnapshotCreateInactiveExternal)
(qemuDomainSnapshotPrepareDiskExternalBackingInactive)
(qemuDomainSnapshotPrepareDiskInternal)
(qemuDomainSnapshotPrepare)
(qemuDomainSnapshotCreateSingleDiskActive)
(qemuDomainSnapshotUndoSingleDiskActive)
(qemuDomainBlockPivot, qemuDomainBlockJobImpl)
(qemuDomainBlockCopy, qemuDomainBlockCommit): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsSafe): Likewise.
* src/qemu/qemu_process.c (qemuProcessGetVolumeQcowPassphrase)
(qemuProcessInitPasswords): Likewise.
* src/security/security_selinux.c
(virSecuritySELinuxSetSecurityFileLabel): Likewise.
* src/storage/storage_driver.c (virStorageFileInitFromDiskDef):
Likewise.
* tests/securityselinuxlabeltest.c (testSELinuxLoadDef):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
If we cannot stat/open a file on pool refresh, returning -1 aborts
the refresh and the pool is undefined.
Only treat missing files as fatal unless VolOpenCheckMode is called
with the VIR_STORAGE_VOL_OPEN_ERROR flag. If this flag is missing
(when it's called from virStorageBackendProbeTarget in
virStorageBackendFileSystemRefresh), only emit a warning and return
-2 to let the caller skip over the file.
https://bugzilla.redhat.com/show_bug.cgi?id=977706
Without this, using /dev/mapper as a directory pool
fails in virStorageBackendUpdateVolTargetInfoFD:
cannot seek to end of file '/dev/mapper/control': Illegal seek
Skip over character devices by default.
https://bugzilla.redhat.com/show_bug.cgi?id=710866
virStorageBackendISCSISession only needs the path of the source
device and virStorageBackendISCSIRescanLUNs doesn't need the pool
at all.
This will allow the functions to be moved to src/util.
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Coverity found an issue in lxc_driver and uml_driver that we don't
check the return value of register functions.
I've also updated all other places and unify the way we check the
return value.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
From commit id 'd53bbfd1'
Found one core and one possible memory leak. Core seen during local
virt-test/tp_libvirt run for the vol_create_from test. The memory leak
was seen by inspection during a review of all VIR_APPEND_ELEMENT changes
In storage_backend_disk/virStorageBackendDiskMakeDataVol(), the 'vol'
needs to be kept around since it's used later, so use the _COPY macro.
This caused a segv in libvirtd:
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fffe87c3700 (LWP 6919)]
virStorageBackendDiskMakeDataVol (vol=0x0, groups=0x7fffc8000d70, pool=0x7fffc8002460) at storage/storage_backend_disk.c:66
66 if (vol->target.path == NULL) {
In storage_backend_rbd/virStorageBackendRBDRefreshPool() there's a failure
path where the 'vol' needs to go through virStorageVolDefFree() since it
wouldn't be appended.
In storageVolLookupByPath the provided path is "sanitized" at first.
This removes some extra slashes and stuff. When the lookup of the volume
fails the original path is used which makes it hard to trace errors in
some cases.
Improve the error message to print the sanitized path along with the
user provided path if they are not equal.
When looking up a volume by path on a non-local filesystem don't use the
"cleaned" path that might be mangled in such a way that it will differ
from a path provided by a storage backend.
Skip the cleanup step for gluster, sheepdog and RBD.
Pools that are not backed by files in the filesystem cause problems with
some APIs. Error out when attempting to upload a volume in such a pool
as currently we expect a local file representation for it.
Auditing all callers of virCommandRun and virCommandWait that
passed a non-NULL pointer for exit status turned up some
interesting observations. Many callers were merely passing
a pointer to avoid the overall command dying, but without
caring what the exit status was - but these callers would
be better off treating a child death by signal as an abnormal
exit. Other callers were actually acting on the status, but
not all of them remembered to filter by WIFEXITED and convert
with WEXITSTATUS; depending on the platform, this can result
in a status being reported as 256 times too big. And among
those that correctly parse the output, it gets rather verbose.
Finally, there were the callers that explicitly checked that
the status was 0, and gave their own message, but with fewer
details than what virCommand gives for free.
So the best idea is to move the complexity out of callers and
into virCommand - by default, we return the actual exit status
already cleaned through WEXITSTATUS and treat signals as a
failed command; but the few callers that care can ask for raw
status and act on it themselves.
* src/util/vircommand.h (virCommandRawStatus): New prototype.
* src/libvirt_private.syms (util/command.h): Export it.
* docs/internals/command.html.in: Document it.
* src/util/vircommand.c (virCommandRawStatus): New function.
(virCommandWait): Adjust semantics.
* tests/commandtest.c (test1): Test it.
* daemon/remote.c (remoteDispatchAuthPolkit): Adjust callers.
* src/access/viraccessdriverpolkit.c (virAccessDriverPolkitCheck):
Likewise.
* src/fdstream.c (virFDStreamCloseInt): Likewise.
* src/lxc/lxc_process.c (virLXCProcessStart): Likewise.
* src/qemu/qemu_command.c (qemuCreateInBridgePortWithHelper):
Likewise.
* src/xen/xen_driver.c (xenUnifiedXendProbe): Simplify.
* tests/reconnect.c (mymain): Likewise.
* tests/statstest.c (mymain): Likewise.
* src/bhyve/bhyve_process.c (virBhyveProcessStart)
(virBhyveProcessStop): Don't overwrite virCommand error.
* src/libvirt.c (virConnectAuthGainPolkit): Likewise.
* src/openvz/openvz_driver.c (openvzDomainGetBarrierLimit)
(openvzDomainSetBarrierLimit): Likewise.
* src/util/virebtables.c (virEbTablesOnceInit): Likewise.
* src/util/viriptables.c (virIpTablesOnceInit): Likewise.
* src/util/virnetdevveth.c (virNetDevVethCreate): Fix debug
message.
* src/qemu/qemu_capabilities.c (virQEMUCapsInitQMP): Add comment.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSINodeUpdate): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
These timeout values make librados/librbd return -ETIMEDOUT when a
operation is blocking due to a failing/unreachable Ceph cluster.
By having the operations time out libvirt will not block.
The internal pools were an idea in one of the first iterations of the
gluster series, which we decided not to use. Somehow the patch still
got pushed. Remove it as the internal flag isn't needed.
This reverts commit 362da8209d.
In a44b7b87bc I've introduced a function
that initializes a storage file wrapper object on gluster based volumes.
The initialization function leaks the private data pointer in case of
failure. This patch fixes it.
Reported by John Ferlan.
In commit e32268184b I accidentally added
twice a typedef for virStorageFileBackend when I moved it between files
across patch iterations. The double declaration breaks build on older
compilers in RHEL5 and FreeBSD.
Remove the spurious definition.
Add APIs that will allow to use the storage driver to assist in
operations on files even for remote filesystems without native
representation as files in the host.
virGetStorageVol can return NULL on out-of-memory. If it does, cleanly
abort the volume clone operation.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
This reverts commit 67ccf91bf2.
We only generate the volume key after we've built it, but the storage
driver expects it to be filled after createVol finishes.
Squash the volume building back with creating to fulfill this
expectation.
This new RBD format supports snapshotting and cloning. By having
libvirt create images in format 2 end-users of the created images
can benefit from the new RBD format.
Older versions of libvirt can work with this new RBD format as long
as librbd supports format 2. RBD format is supported by librbd since
version 0.56 (Ceph Bobtail).
Signed-off-by: Wido den Hollander <wido@widodh.nl>
When restarting sheepdog pool, all volumes are missing.
This patch add automatically all volume from the added pool.
Adding last Daniel P. Berrange's syntaxes correction.
Adding vol on separeted function 'inspired' from parallels_storage :
parallelsAddDiskVolume
The "checkPool" is a bit different for pool with "fc_host"
type source adapter, since the vHBA it's based on might be
not created yet (it's created by "startPool", which is
involked after "checkPool" in storageDriverAutostart). So it
should not fail, otherwise the "autostart" of the pool will
fail either.
The problem is easy to reproduce:
* Enable "autostart" for the pool
* Restart libvirtd service
* Check the pool's state
For pool which relies on remote resources, such as a "iscsi" type
pool, since how long it takes to export the corresponding devices
to host's sysfs is really depended, it could depend on the network
connection, it also could depend on the host's udev procedures. So
it's likely that the volumes are not able to be detected during pool
starting process, polling the sysfs doesn't work, since we don't
know how much time is best for the polling, and even worse, the
volumes could still be not detected or partly not detected even after
the polling. So we end up with a documentation to prompt the fact,
in virsh manual.
And as a small improvement, let's explicitly say no LUNs found in
the debug log in that case.
The public virConnectRef and virConnectClose API are just thin
wrappers around virObjectRef/virObjectRef, with added object
validation and an error reset. Within our backend drivers, use
of the object validation is just an inefficiency since we always
pass valid objects. More important to think about is what
happens with the error reset; our uses of virConnectRef happened
to be safe (since we hadn't encountered any earlier errors), but
in several cases the use of virConnectClose could lose a real
error.
Ideally, we should also avoid calling virConnectOpen() from
within backend drivers - but that is a known situation that
needs much more design work.
* src/qemu/qemu_process.c (qemuProcessReconnectHelper)
(qemuProcessReconnect): Avoid nested public API call.
* src/qemu/qemu_driver.c (qemuAutostartDomains)
(qemuStateInitialize, qemuStateStop): Likewise.
* src/qemu/qemu_migration.c (doPeer2PeerMigrate): Likewise.
* src/storage/storage_driver.c (storageDriverAutostart):
Likewise.
* src/uml/uml_driver.c (umlAutostartConfigs): Likewise.
* src/lxc/lxc_process.c (virLXCProcessAutostartAll): Likewise.
(virLXCProcessReboot): Likewise, and avoid leaking conn on error.
Signed-off-by: Eric Blake <eblake@redhat.com>
To allow using the storage driver APIs to do operation on generic domain
disks we will need to introduce internal storage pools that will give is
a base to support this stuff even on files that weren't originally
defined as a part of the pool.
This patch introduces the 'internal' flag for a storage pool that will
prevent it from being listed along with the user defined storage pools.
Separate the steps to create libvirt's volume metadata from the actual
volume building process. This is already done for regular file based
pools to allow job support for storage APIs.
The commit cad3cf9a95 introduced a crash
due to wrong order of parameters being passed to the function. When
deleting an element, the function decreased the iterator instead of
count and if listing volumes after that (or undefining the pool, NULL
was being dereferenced.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit 6cd60b6 was flat out broken - it tried to print into the
wrong variable. My testing was obviously too cursory (did the
name get a slash added?); valgrind would have caught the error.
Thankfully it didn't hit any release.
Reported by Peter Krempa.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Fix bogus code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Move the code around so that the forward declaration isn't needed. Also
fix code style of the opening brace of the function by moving it to a
separate line.
Currently, 'vol-resize --allocate' allocates new space at the
vol->capacity offset. But the vol->capacity is not necessarily the same
as vol->allocation. For instance:.
[root@localhost ~]# virsh vol-list --pool tmp-pool --details
Name Path Type Capacity Allocation
-------------------------------------------------------------
tmp-vol /root/tmp-pool/tmp-vol file 1.00 GiB 1.00 GiB
[root@localhost ~]# virsh vol-resize tmp-vol --pool tmp-pool 2G
[root@localhost ~]# virsh vol-list --pool tmp-pool --details
Name Path Type Capacity Allocation
-------------------------------------------------------------
tmp-vol /root/tmp-pool/tmp-vol file 2.00 GiB 1.00 GiB
So, if we want to allocate more bytes, so the file is say 3G big, the
real allocated size is 2G actually:
[root@localhost ~]# virsh vol-resize tmp-vol --pool tmp-pool 3G --allocate
[root@localhost ~]# virsh vol-list --pool tmp-pool --details
Name Path Type Capacity Allocation
-------------------------------------------------------------
tmp-vol /root/tmp-pool/tmp-vol file 3.00 GiB 2.00 GiB
This commit uses the correct vol->allocation instead of incorrect
vol->capacity, so the output of the commands above looks like this:
[root@localhost ~]# virsh vol-resize tmp-vol --pool tmp-pool 3G --allocate
[root@localhost ~]# virsh vol-list --pool tmp-pool --details
Name Path Type Capacity Allocation
-------------------------------------------------------------
tmp-vol /root/tmp-pool/tmp-vol file 3.00 GiB 3.00 GiB
Moreover, if the '--alocate' flag was used, we must update the
vol->allocation member in storageVolResize API too, not just
vol->capacity.
Reported-by: Wang Sen <wangsen@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This variable shadows the stat(2) function, which only became visible in
this scope as of commit 9cac8639. Rename the variable so it doesn't
conflict.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
When doing 'virsh vol-dumpxml' on a gluster pool's volume, the
resulting URI incorrectly omitted a slash between hostname and
path: gluster://192.168.122.206rhsvol1/fedora-19.img
This is fallout from me rebasing earlier versions of my patch
that ended up as commit efee1af; I had originally played with
always requiring the gluster volume to have a leading slash,
but it was easier to use the gluster API if the gluster volume
name was guaranteed to have no slash. While I got the URI of
the pool correct, I forgot to fix the URI of a libvirt volume.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Use correct starting point
since uri construction requires leading slash.
Signed-off-by: Eric Blake <eblake@redhat.com>
Kill the use of atoi() and introduce syntax check to forbid it and it's
friends (atol, atoll, atof, atoq).
Also fix a typo in variable name holding the cylinders count of a disk
pool (apparently unused).
examples/domsuspend/suspend.c will need a larger scale refactor as the
whole example file is broken thus it will be exempted from the syntax
check for now.
The storageRegister() didn't check the return from the
virRegisterStorageDriver() like other callers did, so Coverity
flagged it. Just check the return and handle.
When attempting to backport gluster pools to an older versoin
where there is no VIR_STRDUP, I got a crash from calling
strdup(,NULL). Rather than relying on the current else branch
safely doing nothing when there is no fd, it is easier to just
skip it. While at it, there's no need to explicitly set
perms.label to NULL after a VIR_FREE().
* src/storage/storage_backend.c
(virStorageBackendUpdateVolTargetInfoFD): Minor optimization.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 348b4e2 introduced a potential problem (thankfully not
in any release): we are attempting to use virFileReadHeaderFD()
on a file that was opened with O_NONBLOCK. While this
shouldn't be a problem in practice (because O_NONBLOCK
typically doesn't affect regular or block files, and fifos and
sockets cannot be storage volumes), it's better to play it safe
to avoid races from opening an unexpected file type while also
avoiding problems with having to handle EAGAIN while read()ing.
Based on a report by Dan Berrange.
* src/storage/storage_backend.c
(virStorageBackendVolOpenCheckMode): Fix up fd after avoiding race.
Signed-off-by: Eric Blake <eblake@redhat.com>
You'd think I'd learn to actually COMMIT my working tree
between testing that a last-minute fix compiles and pushing.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Typo fix.
Signed-off-by: Eric Blake <eblake@redhat.com>
Putting together pieces from previous patches, it is now possible
for 'virsh vol-dumpxml --pool gluster volname' to report metadata
about a qcow2 file stored on gluster. The backing file is still
treated as raw; to fix that, more patches are needed to make the
storage backing chain analysis recursive rather than halting at
a network protocol name, but that work will not need any further
calls into libgfapi so much as just reusing this code, and that
should be the only code outside of the storage driver that needs
any help from libgfapi. Any additional use of libgfapi within
libvirt should only be needed for implementing storage pool APIs
such as volume creation or resizing, where backing chain analysis
should be unaffected.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterReadHeader): New helper function.
(virStorageBackendGlusterRefreshVol): Probe non-raw files.
Signed-off-by: Eric Blake <eblake@redhat.com>
With this patch, dangling and looping symlinks are silently
ignored, while links to files and directories are treated the
same as the underlying file or directory. This is the same
behavior as both 'directory' and 'netfs' pools.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Treat symlinks similar to
directory and netfs pools.
Signed-off-by: Eric Blake <eblake@redhat.com>
We already had code for handling allocation different than
capacity for sparse files; we just had to wire it up to be
used when inspecting gluster images.
* src/storage/storage_backend.c
(virStorageBackendUpdateVolTargetInfoFD): Handle no fd.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Handle sparse files.
Signed-off-by: Eric Blake <eblake@redhat.com>
Take advantage of the previous patch's addition of 'netdir' as
a distinct volume type, to expose rather than silently skip
directories embedded in a gluster pool. Also serves as an XML
validation for the previous patch.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Don't skip directories.
* tests/storagevolxml2xmltest.c (mymain): Add test.
* tests/storagevolxml2xmlin/vol-gluster-dir.xml: New file.
* tests/storagevolxml2xmlout/vol-gluster-dir.xml: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
In the 'directory' and 'netfs' storage pools, a user can see
both 'file' and 'dir' storage volume types, to know when they
can descend into a subdirectory. But in a network-based storage
pool, such as the upcoming 'gluster' pool, we use 'network'
instead of 'file', and did not have any counterpart for a
directory until this patch. Adding a new volume type
'network-dir' is better than reusing 'dir', because it makes
it clear that the only way to access 'network' volumes within
that container is through the network mounting (leaving 'dir'
for something accessible in the local file system).
* include/libvirt/libvirt.h.in (virStorageVolType): Expand enum.
* docs/formatstorage.html.in: Document it.
* docs/schemasa/storagevol.rng (vol): Allow new value.
* src/conf/storage_conf.c (virStorageVol): Use new value.
* src/qemu/qemu_command.c (qemuBuildVolumeString): Fix client.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePool): Likewise.
* tools/virsh-volume.c (vshVolumeTypeToString): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemVolDelete): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Actually put gfapi to use, by allowing the creation of a gluster
pool. Right now, all volumes are treated as raw and directories
are skipped; further patches will allow peering into files to
allow for qcow2 files and backing chains, and reporting proper
volume allocation. This implementation was tested against Fedora
19's glusterfs 3.4.1; it might be made simpler by requiring a
higher minimum, and/or require more hacks to work with a lower
minimum.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshPool): Initial implementation.
(virStorageBackendGlusterOpen, virStorageBackendGlusterClose)
(virStorageBackendGlusterRefreshVol): New helper functions.
Signed-off-by: Eric Blake <eblake@redhat.com>
We support gluster volumes in domain XML, so we also ought to
support them as a storage pool. Besides, a future patch will
want to take advantage of libgfapi to handle the case of a
gluster device holding qcow2 rather than raw storage, and for
that to work, we need a storage backend that can read gluster
storage volume contents. This sets up the framework.
Note that the new pool is named 'gluster' to match a
<disk type='network'><source protocol='gluster'> image source
already supported in a <domain>; it does NOT match the
<pool type='netfs'><source><target type='glusterfs'>,
since that uses a FUSE mount to a local file name rather than
a network name.
This and subsequent patches have been tested against glusterfs
3.4.1 (available on Fedora 19); there are likely bugs in older
versions that may prevent decent use of gfapi, so this patch
enforces the minimum version tested. A future patch may lower
the minimum. On the other hand, I hit at least two bugs in
3.4.1 that will be fixed in 3.5/3.4.2, where it might be worth
raising the minimum: glfs_readdir is nicer to use than
glfs_readdir_r [1], and glfs_fini should only return failure on
an actual failure [2].
[1] http://lists.gnu.org/archive/html/gluster-devel/2013-10/msg00085.html
[2] http://lists.gnu.org/archive/html/gluster-devel/2013-10/msg00086.html
* configure.ac (WITH_STORAGE_GLUSTER): New conditional.
* m4/virt-gluster.m4: new file.
* libvirt.spec.in (BuildRequires): Support gluster in spec file.
* src/conf/storage_conf.h (VIR_STORAGE_POOL_GLUSTER): New pool
type.
* src/conf/storage_conf.c (poolTypeInfo): Treat similar to
sheepdog and rbd.
(virStoragePoolDefFormat): Don't output target for gluster.
* src/storage/storage_backend_gluster.h: New file.
* src/storage/storage_backend_gluster.c: Likewise.
* po/POTFILES.in: Add new file.
* src/storage/storage_backend.c (backends): Register new type.
* src/Makefile.am (STORAGE_DRIVER_GLUSTER_SOURCES): Build new files.
* src/storage/storage_backend.h (_virStorageBackend): Documet
assumption.
Signed-off-by: Eric Blake <eblake@redhat.com>
$ touch /var/lib/libvirt/images/'a<b>c'
$ virsh pool-refresh default
$ virsh vol-dumpxml 'a<b>c' default | head -n2
<volume>
<name>a<b>c</name>
Oops. That's not valid XML. And when we fix the XML
generation, it fails RelaxNG validation.
I'm also tired of seeing <key>(null)</key> in the example
output for volume xml; while we used NULLSTR() to avoid
a NULL deref rather than relying on glibc's printf
extension behavior, it's even better if we avoid the issue
in the first place. But this requires being careful that
we don't invalidate any storage backends that were relying
on key being unassigned during virStoragVolCreateXML[From].
I would have split this into two patches (one for escaping,
one for avoiding <key>(null)</key>), but since they both
end up touching a lot of the same test files, I ended up
merging it into one.
Note that this patch allows pretty much any volume name
that can appear in a directory (excluding . and .. because
those are special), but does nothing to change the current
(unenforced) RelaxNG claim that pool names will consist
only of letters, numbers, _, -, and +. Tightening the C
code to match RelaxNG patterns and/or relaxing the grammar
to match the C code for pool names is a task for another
day (but remember, we DID recently tighten C code for
domain names to exclude a leading '.').
* src/conf/storage_conf.c (virStoragePoolSourceFormat)
(virStoragePoolDefFormat, virStorageVolTargetDefFormat)
(virStorageVolDefFormat): Escape user-controlled strings.
(virStorageVolDefParseXML): Parse key, for use in unit tests.
* src/storage/storage_driver.c (storageVolCreateXML)
(storageVolCreateXMLFrom): Ensure parsed key doesn't confuse
volume creation.
* docs/schemas/basictypes.rng (volName): Relax definition.
* tests/storagepoolxml2xmltest.c (mymain): Test it.
* tests/storagevolxml2xmltest.c (mymain): Likewise.
* tests/storagepoolxml2xmlin/pool-dir-naming.xml: New file.
* tests/storagepoolxml2xmlout/pool-dir-naming.xml: Likewise.
* tests/storagevolxml2xmlin/vol-file-naming.xml: Likewise.
* tests/storagevolxml2xmlout/vol-file-naming.xml: Likewise.
* tests/storagevolxml2xmlout/vol-*.xml: Fix fallout.
Signed-off-by: Eric Blake <eblake@redhat.com>
It makes no sense to go forward to get the parent host number of a
HBA, and treat the HBA as a vHBA with trying to delete it.
Signed-off-by: Osier Yang <jyang@redhat.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/network/bridge_driver.c: Consistently use commas.
* src/node_device/node_device_hal.c: Likewise.
* src/node_device/node_device_udev.c: Likewise.
* src/storage/storage_backend_rbd.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
vol-clone reports out of memory error with disk type on ppc64.
Currently, wbytes is defined as size_t type (8 bytes), but
args's value in ioctl(fd, args..) in kernel is int (4 bytes).
This makes wbytes 2^32 times larger, causing an out of memory error.
This patch changes size_t to int to synchronize with kernel.
[1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/block/ioctl.c?id=5e01dc7b#n363
[2] https://lkml.org/lkml/2013/11/1/620
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This gets rid of another stat() per volume, as well as cutting
bytes read in half, when populating the volumes of a directory
pool during a pool refresh. Not to mention that it provides an
interface that can let gluster pools also probe file types.
* src/util/virstoragefile.h (virStorageFileProbeFormatFromFD):
Delete.
(virStorageFileProbeFormatFromBuf): New prototype.
(VIR_STORAGE_MAX_HEADER): New constant, based on...
* src/util/virstoragefile.c (STORAGE_MAX_HEAD): ...old name.
(vmdk4GetBackingStore, virStorageFileGetMetadataInternal)
(virStorageFileProbeFormat): Adjust clients.
(virStorageFileProbeFormatFromFD): Delete.
(virStorageFileProbeFormatFromBuf): Export.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Adjust client.
* src/libvirt_private.syms (virstoragefile.h): Adjust exports.
Signed-off-by: Eric Blake <eblake@redhat.com>
We are calling fstat() at least twice per storage volume in
a directory storage pool; this is rather wasteful. Refactoring
this is also a step towards making code reusable for gluster,
where gluster can provide struct stat but cannot use fstat().
* src/storage/storage_backend.h
(virStorageBackendVolOpenCheckMode)
(virStorageBackendUpdateVolTargetInfoFD): Update signature.
* src/storage/storage_backend.c
(virStorageBackendVolOpenCheckMode): Pass stat results back.
(virStorageBackendUpdateVolTargetInfoFD): Use existing stats.
(virStorageBackendVolOpen, virStorageBackendUpdateVolTargetInfo):
Update callers.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
* src/storage/storage_backend_scsi.c
(virStorageBackendSCSIUpdateVolTargetInfo): Likewise.
* src/storage/storage_backend_mpath.c
(virStorageBackendMpathUpdateVolTargetInfo): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Using size_t counts will let us use VIR_APPEND_ELEMENT and friends.
* src/conf/storage_conf.h (_virStoragePoolObjList)
(_virStorageVolDefList): Track list sizes with size_t.
* src/storage/storage_backend_rbd.c
(virStorageBackendRBDRefreshPool): Fix type fallout.
Signed-off-by: Eric Blake <eblake@redhat.com>
The rbd code had a confusing typedef ending in Ptr that was not
actually a pointer, which made the rest of the code harder to
read. This fixes things to actually pass by pointer rather than
by copy.
* src/storage/storage_backend_rbd.c (virStorageBackendStatePtr):
Fix typedef.
(virStorageBackendRBDOpenRADOSConn)
(virStorageBackendRBDCloseRADOSConn)
(volStorageBackendRBDRefreshVolInfo)
(virStorageBackendRBDRefreshPool, virStorageBackendRBDDeleteVol)
(virStorageBackendRBDCreateVol, virStorageBackendRBDRefreshVol)
(virStorageBackendRBDResizeVol): Fix fallout.
Signed-off-by: Eric Blake <eblake@redhat.com>
Most of the usage of getuid()/getgid() is in cases where we are
considering what privileges we have. As such the code should be
using the effective IDs, not real IDs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This should resolve:
https://bugzilla.redhat.com/show_bug.cgi?id=924672
For BZ 924672 the problem stems from the fact that thin pool logical
volume devices show up in /sbin/lvs output just like normal logical
volumes do. Libvirt incorrectly assumes they are just normal logical
volumes and that they will have a corresponding /dev/vgname/lvname
device that has been created by udev and tries to use this device.
To illustrate here is an example of the /dev/vgname/ directory and
the lvs output for a normal lv, thin lv, and thin pool:
LV VG Attr LSize Pool Origin Data% Move Log Copy% Convert
lv vgguests -wi-a---- 1.00g
pool vgguests twi-a-tz- 11.00g 0.00
thinlv vgguests Vwi-a-tz- 1.00g pool 0.00
total 0
lrwxrwxrwx. 1 root root 7 Oct 8 19:35 lv -> ../dm-7
lrwxrwxrwx. 1 root root 7 Oct 8 19:37 thinlv -> ../dm-6
This patch modifies virStorageBackendLogicalMakeVol() to ignore thin pool
devices.
Commit id '532fef36' added a call to fallocate() and some error
handling based on whether or not the function existed. This new
call resulted in libvirt-cim/cimtest failures when attempting to
create a volume with "0" (zero) allocation value. The failure is
logged as:
Oct 9 07:51:33 localhost libvirtd[8030]: cannot allocate 0 bytes in
file '/var/lib/libvirt/images/cimtest-vol.img': Invalid argument
This can also be seen with virsh vol-create-as:
error: Failed to create vol test
error: cannot allocate 0 bytes in file '/home/vm-images/test': Invalid
argument
error: Failed to create vol test
error: cannot allocate 0 bytes in file '/home/vm-images/test': Invalid
argument
It turns out fallocate() will return EINVAL when the incoming 'len'
(or allocation) value is 0 (or less).
We currently have other error codes in singular form, e.g.
VIR_ERR_NETWORK_EXIST. Cleanup the previous patch to match the form.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I created a storage volume(eg: test) from a storage pool(eg:vg10) using
the following command:"virsh vol-create-as --pool vg10 --name test --capacity 300M."
When I re-executed the above command, the output was as the following:
"error: Failed to create vol test
error: Storage volume not found: storage vol 'test' already exists"
I think the output "Storage volume not found" is not appropriate. Because in fact storage
vol test has been found at this time. And then I think virErrorNumber should includes
VIR_ERR_STORAGE_EXIST which can also be used elsewhere. So I make this patch. The result
is as following:
"error: Failed to create vol test
error: storage volume 'test' exists already"
On RHEL 5, compilation fails with:
storage/storage_backend.c: In function 'createRawFile':
storage/storage_backend.c:339: warning: implicit declaration of function 'fallocate'
storage/storage_backend.c:339: warning: nested extern declaration of 'fallocate' [-Wnested-externs]
But:
$ grep HAVE_FALLOCATE config.h
/* #undef HAVE_FALLOCATE */
Huh? It turns out that in kernels that old, fallocate() is not
implemented (config.h is correct), but <linux/fs.h> defines
HAVE_FALLOCATE as an empty witness macro for a completely
different purpose. Since storage_backend.c is including
<linux/fs.h> on RHEL 5, we are hosed by the kernel definition.
Newer kernels no longer pollute the namespace, and it's fairly
easy to convert to an expression that works with both the old
kernel witness and the new-style config.h (undefined or 1).
Problem introduced in commit 532fef3.
* src/storage/storage_backend.c (createRawFile): Avoid namespace
pollution from kernel, by checking HAVE_FALLOCATE for a value.
Signed-off-by: Eric Blake <eblake@redhat.com>
Fixed the safezero call for allocating the rest of the file after cloning
an existing volume; it used to always use a zero offset, causing it to
only allocate the beginning of the file.
Also modified file creation to try to use fallocate(2) to pre-allocate
disk space before copying any data to make sure it fails early on if disk
is full and makes sure we can skip zero blocks when copying file contents.
If fallocate isn't available we will zero out the rest of the file after
cloning and only use sparse cloning if client requested a lower allocation
than the input volume's capacity.
Signed-off-by: Oskari Saarenmaa <os@ohmu.fi>
The VIR_FREE() macro will cast away any const-ness. This masked a
number of places where we passed a 'const char *' string to
VIR_FREE. Fortunately in all of these cases, the variable was not
in fact const data, but a heap allocated string. Fix all the
variable declarations to reflect this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
qemu-img is going to switch the default for QCOW2
to QCOW2v3 (compat=1.1)
Extend the probing for qemu-img command line options to check
if -o compat is supported. If the volume definition specifies
the qcow2 format but no compat level and -o compat is supported,
specify -o compat=0.10 to create a QCOW2v2 image.
https://bugzilla.redhat.com/show_bug.cgi?id=997977
Introduced by commit e0139e3044. virStorageVolDefFree free'ed the
pointers that are still used by the added volume object, this changes
it back to VIR_FREE.
Each of the modules handled reporting error messages from the secret fetching
slightly differently with respect to the error. Provide a similar message
for each error case and provide as much data as possible.
One has to refresh the pool to get the correct pool info after
adding/removing/resizing a volume, this updates the pool metadata
(allocation, available) after those operation are done.
Add a privileged field to storageDriverState
Use the privileged value in order to generate a connection which could
be passed to the various storage backend drivers.
In particular, the iSCSI driver will need a connect in order to perform
pool authentication using the 'chap' secrets and the RBD driver utilizes
the connection during pool refresh for pools using 'ceph' secrets.
For now that connection will be to be to qemu driver until a mechanism
is devised to get a connection to just the secret driver without qemu.
Update virStorageBackendRBDOpenRADOSConn() to use the internal API to the
secret driver in order to get the secret value instead of the external
virSecretGetValue() path. Without the flag VIR_SECRET_GET_VALUE_INTERNAL_CALL
there is no way to get the value of private secret.
This also requires ensuring there is a connection which wasn't true for
for the refreshPool() path calls from storageDriverAutostart() prior to
adding support for the connection to a qemu driver. It seems calls to
virSecretLookupByUUIDString() and virSecretLookupByUsage() from the
refreshPool() path would have failed with no way to find the secret - that is
theoretically speaking since the 'conn' was NULL the failure would have been
"failed to find the secret".
Although the XML for CHAP authentication with plain "password"
was introduced long ago, the function was never implemented. This
patch replaces the login/password mechanism by following the
'ceph' (or RBD) model of using a 'username' with a 'secret' which
has the authentication information.
This patch performs the authentication during startPool() processing
of pools with an authType of VIR_STORAGE_POOL_AUTH_CHAP specified
for iSCSI pools.
There are two types of CHAP configurations supported for iSCSI
authentication:
* Initiator Authentication
Forward, one-way; The initiator is authenticated by the target.
* Target Authentication
Reverse, Bi-directional, mutual, two-way; The target is authenticated
by the initiator; This method also requires Initiator Authentication
This only supports the "Initiator Authentication". (I don't have any
enterprise iSCSI env for testing, only have a iSCSI target setup with
tgtd, which doesn't support "Target Authentication").
"Discovery authentication" is not supported by tgt yet too. So this only
setup the session authentication by executing 3 iscsiadm commands, E.g:
% iscsiadm -m node --target "iqn.2013-05.test:iscsi.foo" --name \
"node.session.auth.authmethod" -v "CHAP" --op update
% iscsiadm -m node --target "iqn.2013-05.test:iscsi.foo" --name \
"node.session.auth.username" -v "Jim" --op update
% iscsiadm -m node --target "iqn.2013-05.test:iscsi.foo" --name \
"node.session.auth.password" -v "Jimsecret" --op update
Not all RBD (Ceph) storage pools have cephx authentication turned on,
so "secret" might not be initialized.
It could also be that the secret couldn't be located.
Only call virSecretFree() if "secret" is initialized earlier.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
When using logical pools, we had to trust the target->path provided.
This parameter, however, can be completely ommited and we can use
'/dev/<source.name>' safely and populate it to target.path.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=952973
The switch statement in 'virStorageBackendCreateQemuImgOpts' used the
for loop end condition 'VIR_STORAGE_FILE_FEATURE_LAST' as a possible value,
but since that cannot happen Coverity spits out a DEADCODE message. Adding
the Coverity tag just removes the Coverity message
Don't reuse the return value of virStorageBackendFileSystemIsMounted.
If it's 0, we'd return it even if the mount command failed.
Also, don't report another error if it's -1, since one has already
been reported.
Introduced by 258e06c.
https://bugzilla.redhat.com/show_bug.cgi?id=981251
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit id '53d5967c' introduced the following:
TEST: storagevolxml2argvtest
.............. 14 OK
==25636== 358 (264 direct, 94 indirect) bytes in 1 blocks are definitely lost in loss record 67 of 75
==25636== at 0x4A06B6F: calloc (vg_replace_malloc.c:593)
==25636== by 0x4C95791: virAlloc (viralloc.c:124)
==25636== by 0x4CA0BB4: virCommandNewArgs (vircommand.c:805)
==25636== by 0x4CA0C88: virCommandNew (vircommand.c:789)
==25636== by 0x408602: virStorageBackendCreateQemuImgCmd (storage_backend.c:849)
==25636== by 0x405427: testCompareXMLToArgvHelper (storagevolxml2argvtest.c:61)
==25636== by 0x4064DF: virtTestRun (testutils.c:158)
==25636== by 0x40516F: mymain (storagevolxml2argvtest.c:195)
==25636== by 0x406B1A: virtTestMain (testutils.c:722)
==25636== by 0x37C1021A04: (below main) (libc-start.c:225)
==25636==
PASS: storagevolxml2argvtest
When creating a virtual FC HBA with virsh/libvirt API, an error message
will be returned: "error: Node device not found",
also the 'nodedev-dumpxml' shows wrong information of wwpn & wwnn
for the new created device.
Signed-off-by: xschen@tnsoft.com.cn
This reverts f90af69 which switched wwpn & wwwn in the wrong place.
https://www.kernel.org/doc/Documentation/scsi/scsi_fc_transport.txt
It's not used anywhere except for the switch in
virStorageBackendCreateQemuImgOpts, where leaving it in causes
a dead code coverity warning and omitting it breaks compilation
because of unhandled enum value.
Introduced by 6298f74.
Add <features> and <compat> elements to volume target XML.
<compat> is a string which for qcow2 represents the QEMU version
it should be compatible with. Valid values are 0.10 and 1.1.
1.1 is implicit if the <features> element is present, otherwise
qemu-img default is used. 0.10 can be specified to explicitly
create older images after the qemu-img default changes.
<features> contains optional features, so far
<lazy_refcounts/> is available, which enables caching of reference
counters, improving performance for snapshots.
iscsiadm now supports specifying hostnames in the portal argument [1]
Instead of resolving the hostname to a single IPv4 address, pass the
hostname to isciadm, allowing IPv6 targets to work.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=624437
Setting of local variables in virStorageBackendCreateQemuImgCmd was
unnecessarily cluttered with ternary operators and repeated testing of
of conditions.
This patch refactors the function to use if statements and improves
error reporting in case inputvol is specified but does not contain
target path. Previously we would complain about "unknown storage vol
type 0" instead of the actual problem.
As the document for "virsh-resize" says:
<...>
Attempts to shrink the volume will fail unless I<--shrink> is present;
</...>
This makes sense as it at least prevent the user shrinking the important
data of volume without a notice.
The document for "vol-resize" says the new capacity will be sparse
unless "--allocate" is specified, however, the "--allocate" flag
is never implemented. This implements the "--allocate" flag for
fs backend's raw type volume, based on posix_fallocate and the
syscall SYS_fallocate.
qemu-img resize will fail with "The new size must be a multiple of 512"
if libvirt doesn't round it first.
This fixes rhbz#951495
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
These all existed before virfile.c was created, and for some reason
weren't moved.
This is mostly straightfoward, although the syntax rule prohibiting
write() had to be changed to have an exception for virfile.c instead
of virutil.c.
This movement pointed out that there is a function called
virBuildPath(), and another almost identical function called
virFileBuildPath(). They really should be a single function, which
I'll take care of as soon as I figure out what the arglist should look
like.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=851411https://bugzilla.redhat.com/show_bug.cgi?id=955500
The first problem was that virFileOpenAs was returning fd (-1) in one
of the error cases rather than ret (-errno), so the caller thought
that the error was EPERM rather than ENOENT.
The second problem was that some log messages in the general purpose
qemuOpenFile() function would always say "Failed to create" even if
the caller hadn't included O_CREAT (i.e. they were trying to open an
existing file).
This fixes virFileOpenAs to jump down to the error return (which
returns ret instead of fd) in the previously mentioned incorrect
failure case of virFileOpenAs(), removes all error logging from
virFileOpenAs() (since the callers report it), and modifies
qemuOpenFile to appropriately use "open" or "create" in its log
messages.
NB: I seriously considered removing logging from all callers of
virFileOpenAs(), but there is at least one case where the caller
doesn't want virFileOpenAs() to log any errors, because it's just
going to try again (qemuOpenFile()). We can't simply make a silent
variation of virFileOpenAs() though, because qemuOpenFile() can't make
the decision about whether or not it wants to retry until after
virFileOpenAs() has already returned an error code.
Likewise, I also considered changing virFileOpenAs() to return -1 with
errno set on return, and may still do that, but only as a separate
patch, as it obscures the intent of this patch too much.
If the volume is of a clustered volume group, and not active, the
related pool APIs fails on opening /dev/vg/lv. If the volume is
suspended, it hangs on open(2) the volume.
Though the best solution is to expose the volume status in volume
XML, and even better to provide API to activate/deactivate the volume,
but it's not the work I want to touch currently. Volume status in
other status is just fine to skip.
About the 5th field of lv_attr (from man lvs[8])
<quote>
5 State: (a)ctive, (s)uspended, (I)nvalid snapshot, invalid
(S)uspended snapshot, snapshot (m)erge failed,suspended
snapshot (M)erge failed, mapped (d)evice present without
tables, mapped device present with (i)nactive table
</quote>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
POSIX says that both basename() and dirname() may return static
storage (aka they need not be thread-safe); and that they may but
not must modify their input argument. Furthermore, <libgen.h>
is not available on all platforms. For these reasons, you should
never use these functions in a multi-threaded library.
Gnulib instead recommends a way to avoid the portability nightmare:
gnulib's "dirname.h" provides useful thread-safe counterparts. The
obvious dir_name() and base_name() are GPL (because they malloc(),
but call exit() on failure) so we can't use them; but the LGPL
variants mdir_name() (malloc's or returns NULL) and last_component
(always points into the incoming string without modifying it,
differing from basename semantics only on corner cases like the
empty string that we shouldn't be hitting in the first place) are
already in use in libvirt. This finishes the swap over to the safe
functions.
* cfg.mk (sc_prohibit_libgen): New rule.
* src/util/vircgroup.c: Fix offenders.
* src/parallels/parallels_storage.c (parallelsPoolAddByDomain):
Likewise.
* src/parallels/parallels_network.c (parallelsGetBridgedNetInfo):
Likewise.
* src/node_device/node_device_udev.c (udevProcessSCSIHost)
(udevProcessSCSIDevice): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskDeleteVol): Likewise.
* src/util/virpci.c (virPCIGetDeviceAddressFromSysfsLink):
Likewise.
* src/util/virstoragefile.h (_virStorageFileMetadata): Avoid false
positive.
Signed-off-by: Eric Blake <eblake@redhat.com>
Ensure that all drivers implementing public APIs use a
naming convention for their implementation that matches
the public API name.
eg for the public API virDomainCreate make sure QEMU
uses qemuDomainCreate and not qemuDomainStart
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It will simplify later work if the sub-drivers have dedicated
APIs / field names. ie virNetworkDriver should have
virDrvNetworkOpen and virDrvNetworkClose methods
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
libvirt/HACKING suggests omitting braces with a
single-line body; this patch fixes the coding style
problem for the Sheepdog storage backend driver.
Signed-off-by: Harry Wei <harryxiyou@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This finds the parent for vHBA by iterating over all the HBA
which supports vport_ops capability on the host, and return
the first one which is online, not saturated (vports in use
is less than max_vports).
startPool creates the vHBA if it's not existed yet, stopPool destroys
the vHBA. Also to support autostart, checkPool will creates the vHBA
if it's not existed yet.
The helper iterates over sysfs, to find out the matched scsi host
name by comparing the wwnn,wwpn pair. It will be used by checkPool
and refreshPool of storage scsi backend. New helper getAdapterName
is introduced in storage_backend_scsi.c, which uses the new util
helper virGetFCHostNameByWWN to get the fc_host adapter name.
node device driver names the HBA like "scsi_host5", but storage
driver uses "host5", which could make the user confused. This
changes them to be consistent. However, for back-compat reason,
adapter name like "host5" is still supported.
This introduces 4 new attributes for storage pool source adapter.
E.g.
<adapter type='fc_host' parent='scsi_host5' wwnn='20000000c9831b4b' wwpn='10000000c9831b4b'/>
Attribute 'type' can be either 'scsi_host' or 'fc_host', and defaults
to 'scsi_host' if attribute 'name' is specified. I.e. It's optional
for 'scsi_host' adapter, for back-compat reason. However, mandatory
for 'fc_host' adapter and any new future adapter types. Attribute
'parent' is to specify the parent for the fc_host adapter.
* docs/formatstorage.html.in:
- Add documents for the 4 new attrs
* docs/schemas/storagepool.rng:
- Add RNG schema
* src/conf/storage_conf.c:
- Parse and format the new XMLs
* src/conf/storage_conf.h:
- New struct virStoragePoolSourceAdapter, replace "char *adapter" with it;
- New enum virStoragePoolSourceAdapterType
* src/libvirt_private.syms:
- Export TypeToString and TypeFromString
* src/phyp/phyp_driver.c:
- Replace "adapter" with "adapter.data.name", which is member of the union
of the new struct virStoragePoolSourceAdapter now. Later patch will
add the checking, as "adapter.data.name" is only valid for "scsi_host"
adapter.
* src/storage/storage_backend_scsi.c:
- Like above
* tests/storagepoolxml2xmlin/pool-scsi-type-scsi-host.xml:
* tests/storagepoolxml2xmlin/pool-scsi-type-fc-host.xml:
- New test for 'fc_host' and "scsi_host" adapter
* tests/storagepoolxml2xmlout/pool-scsi.xml:
- Change the expected output, as the 'type' defaults to 'scsi_host' if 'name"
specified now
* tests/storagepoolxml2xmlout/pool-scsi-type-scsi-host.xml:
* tests/storagepoolxml2xmlout/pool-scsi-type-fc-host.xml:
- New test
* tests/storagepoolxml2xmltest.c:
- Include the test
There are a number of places which generate cast alignment
warnings, which are difficult or impossible to address. Use
pragmas to disable the warnings in these few places
conf/nwfilter_conf.c: In function 'virNWFilterRuleDetailsParse':
conf/nwfilter_conf.c:1806:16: warning: cast increases required alignment of target type [-Wcast-align]
item = (nwItemDesc *)((char *)nwf + att[idx].dataIdx);
conf/nwfilter_conf.c: In function 'virNWFilterRuleDefDetailsFormat':
conf/nwfilter_conf.c:3238:16: warning: cast increases required alignment of target type [-Wcast-align]
item = (nwItemDesc *)((char *)def + att[i].dataIdx);
storage/storage_backend_mpath.c: In function 'virStorageBackendCreateVols':
storage/storage_backend_mpath.c:247:17: warning: cast increases required alignment of target type [-Wcast-align]
names = (struct dm_names *)(((char *)names) + next);
nwfilter/nwfilter_dhcpsnoop.c: In function 'virNWFilterSnoopDHCPDecode':
nwfilter/nwfilter_dhcpsnoop.c:994:15: warning: cast increases required alignment of target type [-Wcast-align]
pip = (struct iphdr *) pep->eh_data;
nwfilter/nwfilter_dhcpsnoop.c:1004:11: warning: cast increases required alignment of target type [-Wcast-align]
pup = (struct udphdr *) ((char *) pip + (pip->ihl << 2));
nwfilter/nwfilter_learnipaddr.c: In function 'procDHCPOpts':
nwfilter/nwfilter_learnipaddr.c:327:33: warning: cast increases required alignment of target type [-Wcast-align]
uint32_t *tmp = (uint32_t *)&dhcpopt->value;
nwfilter/nwfilter_learnipaddr.c: In function 'learnIPAddressThread':
nwfilter/nwfilter_learnipaddr.c:501:43: warning: cast increases required alignment of target type [-Wcast-align]
struct iphdr *iphdr = (struct iphdr*)(packet +
nwfilter/nwfilter_learnipaddr.c:538:43: warning: cast increases required alignment of target type [-Wcast-align]
struct iphdr *iphdr = (struct iphdr*)(packet +
nwfilter/nwfilter_learnipaddr.c:544:48: warning: cast increases required alignment of target type [-Wcast-align]
struct udphdr *udphdr= (struct udphdr *)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
