Now that the virNWFilterBinding APIs are using the nwfilter
update lock directly, there is no need for the virt drivers
to do it themselves.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
That is the proper POSIX way.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add support for sending one FD from the client along with a monitor
command so that it's possible to use 'getfd' and 'add-fd' to use FDs
passed from the client with other QMP commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemuDomainPrepareDiskSourceData' propagates 'detect_zeroes' only for
the disk source image, but the mirror destination has the ambition to
replace the disk source when the job is finished, so we need to
propagate the 'detect_zeroes' setting also in that case.
Unfortunately it would become very hairy to either set 'disk->mirror'
sooner or propagate that we want this done into
'qemuDomainPrepareDiskSourceData', so the most straightforward solution
is to do the propagation inside 'qemuDomainBlockCopyCommon'.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/277
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When undefining a VM, we must optionally delete any NVRAM that might
exist. When using firmware auto-select we always check the generated
path, ignoring any user specified path.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Using the following spatch, I've identified two places which
could be switched from explicit virDomainObjIsActive() +
virReportError() to virDomainObjCheckActive():
@@
expression dom;
@@
if (
- !virDomainObjIsActive(dom)
+ virDomainObjCheckActive(dom) < 0
) {
- virReportError(VIR_ERR_OPERATION_INVALID, "%s", _("domain is not running"));
...
}
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add calc_mode for dirtyrate statistics retured by
virsh domstats --dirtyrate api, also add vcpu dirtyrate
if dirty-ring mode was used in last measurement.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extend flags parameter of virDomainStartDirtyRateCalc as a
superset of virDomainDirtyRateCalcFlags, parse the flags and
handle it correspondingly in qemuDomainStartDirtyRateCalc.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add mode parameter to qemuDomainStartDirtyRateCalc API, 'mode'
option of 'calc-dirty-rate' command was introduced since
qemu >= 6.2.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Probing QEMU_CAPS_CALC_DIRTY_RATE capability in advance
in case of failure when calculating dirty page rate.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'virDrvFeature' has a combination of features which are asserted by
the specific driver and features which are actually global.
In many cases the implementation was cargo-culted into newer drivers
without re-assesing whether it makes sense.
This patch introduces a global function which will specifically handle
these global flags and defer the rest to the driver.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We only need to set statsType in almost every case of setting
something from private data, so it seems unnecessary to pull
privateData out of current / completed job for just this one
thing every time. I think this patch keeps the code cleaner
without variables used just once.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This patch includes:
* introducing new files: src/hypervisor/domain_job.c and src/hypervisor/domain_job.h
* new struct virDomainJobData, which is almost the same as
qemuDomainJobInfo - the only differences are moving qemu specific
job stats into the qemuDomainJobDataPrivate and adding jobType
(possibly more attributes in the future if needed).
* moving qemuDomainJobStatus to the domain_job.h and renaming it
as virDomainJobStatus
* moving and renaming qemuDomainJobStatusToType
* adding callback struct virDomainJobDataPrivateDataCallbacks
taking care of allocation, copying and freeing of private data
of virDomainJobData
* adding functions for virDomainJobDataPrivateDataCallbacks for
qemu hypervisor
* adding 'public' (public between the different hypervisors) functions
taking care of init, copy, free of virDomainJobData
* renaming every occurrence of qemuDomainJobInfo *info to
virDomainJobData *data
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Setup the chardev similarly to how we do it on startup so that virtlogd
is properly used with chardevs which are hotplugged to a VM.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can now replace the existing NVRAM file on startup when
the API requests this.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This change was generated using the following spatch:
@ rule1 @
expression a;
identifier f;
@@
<...
- f(*a);
... when != a;
- *a = NULL;
+ g_clear_pointer(a, f);
...>
@ rule2 @
expression a;
identifier f;
@@
<...
- f(a);
... when != a;
- a = NULL;
+ g_clear_pointer(&a, f);
...>
Then, I left some of the changes out, like tools/nss/ (which
doesn't link with glib) and put back a comment in
qemuBlockJobProcessEventCompletedActiveCommit() which coccinelle
decided to remove (I have no idea why).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Any active domain has a copy in the privateData, filled in
qemuProcessInit.
Move the qemu capability check below the activeness check and remove
the extra lookup.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Apparently, some of '&*variable' slipped in. Drop '&*' and access
the variable directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
We require the header and the secret to be present.
Use a different approach to virParams to report an error if they
are not present, instead of trying to pass empty arguments to QEMU
via QMP.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor some cgroup management methods from qemu into hypervisor.
These methods will be shared with ch driver for cgroup management.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This reverts commit 938382b60ae5bd1f83b5cb09e1ce68b9a88f679a.
Turns out, the commit did more harm than good. It changed
semantics on some public APIs. For instance, while
qemuDomainGetInfo() previously did not returned an error it does
now. While the calls to virProcessGetStatInfo() is guarded with
virDomainObjIsActive() it doesn't necessarily mean that QEMU's
PID is still alive. QEMU might be gone but we just haven't
realized it (e.g. because the eof handler thread is waiting for a
job).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2041610
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Its only use was to check conflicts of the sgio attributes between
devices shared with other domains.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Otherwise we'll keep using the new pinning value even if it can't be
applied to the thread.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2040555
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The bitmap recorded in the live/persistent definition was re-parsed two
more times. We can copy it which is cheaper and less verbose.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Rather than callers second-guessing when the snapshot definition is
assigned turn it into a double pointer and clear it on success.
Fix callers to work with the new semantics.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the variable holding the snapshot definition into the loop and use
automatic clearing for it. Adjust the code for parity.
Note that the clearing of 'snapdef' on success of
'virDomainSnapshotAssignDef' will be refactored in upcoming patches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently virProcessGetStatInfo() always returns success and only logs error
when it is unable to parse the data. Make this function actually report the
error and return a negative value in this error scenario.
Fix the callers so that they do not override the error generated.
Also fix non-linux implementation of this function so as to report error.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All the fd-passing setup of chardevs which this hack meant to disable
was moved to the host-preparation phase which is skipped for formatting
of non-real commandlines.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move qemuGetProcessInfo and qemuGetSchedInfo methods to util and share them
with ch driver.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In a few places (e.g. device attach/detach/update) we are given a
device XML, parse it but then need a copy of parsed data so that
the original can be passed to function handling the request over
inactive XML and the copy is then passed to function handling the
operation over live XML. Note, both functions consume passed
device on success, hence the need for copy.
The problem is in combination of how the copy is obtained and
where is passed. The copy is done by calling
virDomainDeviceDefCopy() which does only inactive copy, i.e. no
live information is copied over (e.g. no aliases).
Then, this copy (inactive XML effectively) is passed to function
handling live part of the operation (e.g.
qemuDomainUpdateDeviceLive()) and the definition containing all
the juicy, live bits is passed to function handling inactive part
of the operation (e.g. qemuDomainUpdateDeviceConfig()).
This is rather incorrect, and XML copies should be passed to
their respective functions.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2036895
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Set a launch secret in guest memory using the sev-inject-launch-secret
QMP API. Only supported with qemu >= 6.0.0 and SEV-enabled guests in a
paused state.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The function was formatted weirdly which prompted additions to conform
to the unusual style.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Let's imagine a guest that's configured with strict numatune:
<numatune>
<memory mode='strict' nodeset='0'/>
</numatune>
For guests with NUMA:
Depending on machine type used (see commit v6.4.0-rc1~75) we
generate either:
1) -object '{"qom-type":"memory-backend-ram","id":"ram-node0",\
"size":20971520,"host-nodes":[0],"policy":"preferred"}' \
-numa node,nodeid=0,cpus=0,memdev=ram-node0
or
2) -numa node,nodeid=0,cpus=0,mem=20480
Later, when QEMU boots up and cpuset CGroup controller is
available we further restrict QEMU there too. But there's a
behaviour difference hidden: while in case 1) QEMU is restricted
from beginning, in case 2) it is not and thus it may happen that
it will allocate memory from different NUMA node and even though
CGroup will try to migrate it, it may fail to do so (e.g. because
memory is locked). Therefore, one can argue that case 2) is
broken. NB, case 2) is exactly what mode 'restrictive' is for.
However, in case 1) we are unable to update QEMU with new
host-nodes, simply because it's lacking a command to do so.
For guests without NUMA:
It's very close to case 2) from above. We have commit
v7.10.0-rc1~163 that prevents us from outputting host-nodes when
generating memory-backend-* for system memory, but that simply
allows QEMU to allocate memory anywhere and then relies on
CGroups to move it to desired location.
Due to all of this, there is no reliable way to change nodeset
for mode 'strict'. Let's forbid it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The whole idea of VIR_DOMAIN_NUMATUNE_MEM_RESTRICTIVE is that the
memory location is restricted only via CGroups and thus can be
changed on the fly (which is exactly what
qemuDomainSetNumaParamsLive() does. Allow this mode there then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
And its callers. The parameter is no longer used since virDomainObjSave
was replaced with qemuDomainSaveStatus wrapper.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Different CPU generations have different limits on the number
of SEV/SEV-ES guests that can be run. Since both limits come
from the same overall set, there is typically also BIOS config
to set the tradeoff betweeen SEV and SEV-ES guest limits.
This is important information to expose for a mgmt application
scheduling guests to hosts.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Report extra info about the SEV setup, returning those fields
that are required to calculate the expected launch measurement
HMAC(0x04 || API_MAJOR || API_MINOR || BUILD ||
GCTX.POLICY || GCTX.LD || MNONCE; GCTX.TIK)
specified in section 6.5.1 of AMD Secure Encrypted
Virtualization API.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Querying launch params on a inactive guest currently triggers
a warning about the monitor being NULL.
https://bugzilla.redhat.com/show_bug.cgi?id=2030437
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We have just one case when we wish to wait for incomming connections for
a listening socket and that is for vhost-user network devices.
Passing this via a flag to qemuBuildChrChardevStr is unwieldy. Add a
field to qemuDomainChrSourcePrivate and populate it for our special
case inside of qemuDomainPrepareChardevSourceOne.
Since we wait for incomming connections only on startup of a new VM we
also need to pass in a flag whether qemuDomainPrepareChardevSourceOne
is called on a new start or on hotplug.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the qemuDomainDeviceBackendChardevForeach helper to iterate all
eligible structs and convert the setup of the TLS defaults from the
config.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This reverts commit 69977ff10560a80bcf5bf93f1a3f819a2d1623ca.
After previous commit it's no longer possible that QEMU driver is
not initialized in qemuStateShutdownPrepare() nor
qemuStateShutdownWait().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Wire up the flag to enable the 'write-blocking' 'copy-mode' of
'blockdev-mirror'.
It's not supported by all qemu versions but it is with those which we
use -blockdev with so we can use that instead of adding another custom
capability as we use blockdev for some time now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Forces the data to be written synchronously to both the original and the
mirrored images which ensures that the job will reach synchronized
phase.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In qemuConnectGetAllDomainStats() there a loop that iterates over
all domains that stats are to be fetched for. Within this loop
the qemuDomainGetStats() is called which is responsible for
fetching stats for an individual domain. Now, the code that
handles successful and failure cases is almost the same. Rework
it, so that the code is deduplicated. Note, that the check for
!tmp is dropped because upon successful return from
qemuDomainGetStats() it is always allocated.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since f29d7c3e698 we have an option for checking capabilities
required for given type of statistics upfront, instead of the
callback. Switch qemuDomainGetStatsIOThread() callback to the new
style.
This will now error out properly if user requests IOTHREAD stats
forcibly (via VIR_CONNECT_GET_ALL_DOMAINS_STATS_ENFORCE_STATS
flag) but QEMU doesn't support IOThreads. Previously, this was
silently ignored.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The idea of queryDirtyRateRequired[] is that it lists QEMU
capabilities required for given domstats record
(VIR_DOMAIN_STATS_DIRTYRATE in this particular case) and
QEMU_CAPS_LAST is used as a sentinel. Therefore, there can never
be anything after it. Drop the comma to make it more obvious.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
