Add <controller type='scsi' model handling for virtio transitional
devices. Ex:
<controller type='scsi' model='virtio-transitional'/>
* "virtio-transitional" maps to qemu "virtio-scsi-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-scsi-non-transitional"
The naming here doesn't match the pre-existing model=virtio-scsi.
The prescence of '-scsi' there seems kind of redundant as we have
type='scsi' already, so I decided to follow the pattern of other
patches and use virtio-transitional etc.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<input> devices lack the model= attribute which is used by
most other device types. To eventually support
virtio-input-host-pci-{non-}traditional in qemu, let's add
a standard model= attribute. This just adds the domain_conf
wiring
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<filesystem> devices lack the model= attribute which is used by
most other device types. To eventually support
virtio-9p-pci-{non-}traditional in qemu, let's add a standard
model= attribute. The accepted values are:
- virtio
- virtio-transitional
- virtio-non-transitional
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
qemu vhost-scsi devices map to XML roughly like:
<hostdev mode='subsystem' type='scsi_host'>
<source protocol='vhost' wwpn=X/>
</hostdev>
To support vhost-scsi-pci-{non-}traditional in qemu, we
need to to extend the SCSI Host hostdev XML to handle
model= value. This matches the XML model= format used
for mediated devices. This is just the domain_conf bits
and some XML test cases.
Use of virtio-X naming here does not match the hostdev
protocol=vhost nor does it match the qemu vhost-X device
naming, however it's more consistent with all other
model= names in this area, and also matches the
inconsistency of <vsock> devices which use model=virtio
but map to vhost-vsock on the qemu commandline
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add new <disk> model values for virtio transitional devices. When
combined with bus='virtio':
* "virtio-transitional" maps to qemu "virtio-blk-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-blk-pci-non-transitional"
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
<disk> devices lack the model= attribute which is used by
most other device types. bus= mostly acts as one, but it
serves other purposes too like determing what target=
prefix to use, and for matching against controller type=
values.
Extending bus= to handle additional virtio transitional
devices will complicate apps lives, and it isn't a clean
mapping anyways. So let's bite the bullet and add a new
<disk model=X/> attribute, and wire up common handling
for virtio and virtio-{non-}transitional
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add a single QEMU_CAPS_VIRTIO_PCI_TRANSITIONAL that
will be set if any of the following qemu devices are found:
virtio-blk-pci-transitional
virtio-blk-pci-non-transitional
virtio-net-pci-transitional
virtio-net-pci-non-transitional
vhost-scsi-pci-transitional
vhost-scsi-pci-non-transitional
virtio-rng-pci-transitional
virtio-rng-pci-non-transitional
virtio-9p-pci-transitional
virtio-9p-pci-non-transitional
virtio-balloon-pci-transitional
virtio-balloon-pci-non-transitional
vhost-vsock-pci-transitional
vhost-vsock-pci-non-transitional
virtio-input-host-pci-transitional
virtio-input-host-pci-non-transitional
virtio-scsi-pci-transitional
virtio-scsi-pci-non-transitional
virtio-serial-pci-transitional
virtio-serial-pci-non-transitional
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1658504
This function is called when a domain is starting up (in qemu
driver that is when qemu cmd line is generated). It is used to
translate <disk type='volume'/> to something usable by filling in
virStorageSource (e.g. fetching disk path, or some connection URI
for a network FS). But some of these info are not stored in
status XML and thus the function is called on
qemuProcessReconnect too to reconstruct runtime data. But this
poses a problem because after the first run the mode is set to
'direct', but in the second run this triggers a failure because
mode is valid only for 'iscsi' volumes and not 'iscsi-direct'
ones.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Rewrite the code to make usage of some VIR_AUTOFREE logic.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that we're using VIR_AUTOFREE there's quite a bit of clean up
possible for now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Let's make use of the auto __cleanup capabilities for VIR_FREE consumers.
In some cases adding or removing blank lines for readability.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In preparation for VIR_AUTOFREE usage, let's remove a couple
of unused variables so that clang compilations won't fail.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that we're using VIR_AUTOPTR(virBitmap) there's a couple of methods
that we can clean up some now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Let's make use of the auto __cleanup capabilities for virBitmapPtr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In preparation for using auto free mechanism, change to using the
VIR_STEAL_PTR on @def to @ret and of course be sure to properly clean
up @def in cleanup.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Use the new helper when moving around the current node of the XPath
context.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Quite a few parts modify the XPath context current node to shift the
scope and allow easier queries. This also means that the node needs
to be restored afterwards.
Introduce a macro based on 'VIR_AUTOCLEAN' which adds a local structure
on the stack remembering the original node along with a function which
will make sure that the node is reset when the local structure leaves
scope.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The helper function is used by the VIR_AUTOUNREF macro. Prior art is to
clear the pointer even if the variable goes out of scope.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We'd free only the first element of the vector leaking the rest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We don't need it as there's a separate macro for auto-freeing of string
lists.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Use of VIR_AUTOPTR and virString is confusing as it's a list and not a
single pointer. Replace it by VIR_AUTOSTRINGLIST as string lists are
basically the only sane NULL-terminated list we can have.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Similar to VIR_AUTOPTR, VIR_AUTOSTRINGLIST defines a list of strings
which will be freed if the pointer is leaving scope.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The existing qemu snapshot code has a slight bug: if the domain
is currently pmsuspended, you can't use the _REDEFINE flag even
though the current domain state should have no bearing on being
able to recreate metadata state; and conversely, you can use the
_REDEFINE flag to create snapshot metadata claiming to be
pmsuspended as a bypass to the normal restrictions that you can't
create an original qemu snapshot in that state (the restriction
against pmsuspend is specific to qemu, rather than part of the
driver-agnostic snapshot_conf code).
Fix this by checking the snapshot state (when redefining) instead
of the domain state (which is a subset of snapshot states).
Fixes the second problem mentioned in https://bugzilla.redhat.com/1680304
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Both block_size and nb_block are unit32_t and multiplying them overflows
at 4GiB.
Moreover, the iscsi_*10_* APIs use 32bit number of blocks and thus they
can only address images up to 2TiB with 512B blocks. Let's use 64b
iscsi_*16_* APIs instead.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When fetching LUNs from iscsi server the
virISCSIDirectReportLuns() is called. This function does some
libiscsi calls and then calls virISCSIDirectRefreshVol() over
each LUN found. It's unfortunate that the latter calls
virStoragePoolObjClearVols() as we lose all LUNs processed
in previous iterations.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Jirka reported a bug that with every 'virsh pool-refresh' an
iscsi-direct pool would grow and grow. The problem is that
virISCSIDirectRefreshVol() only adds to def->capacity and
def->allocation but nothing clears it out to begin with.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
For consistency with other error messages, and the fact that
the object is always called a virDomainSnapshot rather than
a mere virSnapshot, include the word "domain" in the error
message.
Suggested-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 28f8dfdc (1.0.0) added a flag to virDomainGetXMLDesc, but
failed to document its effects. And considering that the
MIGRATABLE flag has been the source of past bugs (CVE-2014-7823,
fixed in commit b1674ad5 (1.2.11), or even cf2d4c60 (1.2.13) where
flag mismatch broke virsh edit), make the wording wishy-washy
enough to discourage using the flag casually, by mentioning that
the resulting XML is more for internal use than for validation
against the schema.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Due to historical back-compat, bare 'virsh snapshot-create-as'
favors internal snapshots (but can't be used on domains with raw
storage), while 'virsh snapshot-create-as --disk-only' favors
external snapshots. What's more, snapshots created with
--disk-only while the domain was running are marked as snapshot
state 'disk-snapshot', while snapshots created while the domain
was offline are marked as snapshot state 'shutdown' (a
'disk-snapshot' image might not be quiescent, while a 'shutdown'
snapshot always is).
But this leads to some interesting problems: if we create a
--disk-only snapshot of an offline guest, and then immediately try
to 'virsh snapshot-create --redefine' using the resulting XML to
overwrite the existing snapashot in place, things silently succeed,
but 'virsh snapshot-create --redefine --disk-only' fails with an
error message that the snapshot state is not 'disk-only'. Worse,
if we delete the snapshot metadata first and then try to recreate
things, omitting --disk-only fails because the verification code
wants to force the default of an internal snapshot (which doesn't
work with raw disks), and using --disk-only still fails because the
snapshot XML is not 'disk-only' - making it impossible to recreate
the snapshot metadata (or to transfer it from one libvirtd host to
another). Ideally, the presence or absence of the --disk-only
flag, and the presence or absence of an existing snapshot being
overwritten, shouldn't matter; if the XML is valid for one
situation, it should always be valid to redefine the metadata for
that snapshot.
Fix things by uniformly using virDomainSnapshotDefIsExternal()
(caching the results up front, and eliminating other 'if' clauses
now rendered redundant) when deciding whether the XML being
requested for redefinition should permit external or force internal
state capture (we got it right in only one out of three places in
the function).
See also https://bugzilla.redhat.com/1680304; this fixes the
domain-agnostic problems mentioned there, but another patch is
needed to fix further oddities with the qemu driver. I did not
check for sure when the problems were introduced (git blame puts
some affected hunks as far back as 1.0.0), but it was definitely
been broken even before when commit 670e86bf (1.1.4) factored
redefine prep out of qemu code into the common snapshot_conf code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Upcoming patches plan to introduce virDomainCheckpointPtr as a new
object for use in incremental backups, along with documentation on
how incremental backups differ from snapshots. But first, we need
to rename any existing mention of a 'system checkpoint' to instead
be a 'full system snapshot', so that we aren't overloading
the term checkpoint.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
vcpupin will fail when maxvcpus is larger than current
vcpu:
virsh vcpupin win7 --vcpu 0 --cpulist 5-6
error: Requested operation is not valid: cpu affinity is not supported
win7 xml in the command above is like below:
...
<vcpu current="3" placement="static">8</vcpu>
...
The reason is vcpu[3] and vcpu[4] have zero tids and should not been
compared as valid situation in qemuDomainRefreshVcpuInfo().
This issue is introduced by commit 34f7743, which fix recording of vCPU
pids for MTTCG.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Added GPFS as shared file system recognized during live migration
security checks.
GPFS is 'IBM General Parallel File System' also called
'IBM Spectrum Scale'
BUG: https://bugzilla.redhat.com/show_bug.cgi?id=1679528
Signed-off-by: Diego Michelotto <diego.michelotto@cnaf.infn.it>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The structure used to handle network entries was based on 'if,else'
conditions. This commit converts this ugly structure into a switch to
clearify each option of the handler.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Extract out the network "type" processing into it's own method
rather than inline within lxcNetworkParseDataSuffix.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This commit removes the full network entry setting: "lxc.network.X" to
type only. Like "type", "name", "flags", etc. This will handle entries
regardless of whether they are prefixed by "lxc.network." (today) or
"lxc.net.X." (the future).
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Refactor lxcNetworkWalkCallback to be a simple method to handle
both possible network settings with indexes or the simple one. It is
better the decouple the whole algorithm to parse data to only parse
which entry type libvirt is handling.
The new method is responsible to verify is the settings correspond to
network entry. Right now, it is only verifying "lxc.network.", but in
the future, it can be used to verify "lxc.net.X." too. Any other case
would be rejected.
On the other hand, the idea here is working only with types. If we know
that entry is part of network settings, after we just need to know which
type is. It keeps the handler simple.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The new method called lxcNetworkParseDataIPs() is responsible to handle
IPv{4,6} settings now. The idea is let lxcNetworkWalkCallback() method
handle all entries related to network definition only.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
libvirt_iohelper is used internally by the virFileWrapperFd APIs;
more specifically, in the QEMU driver we have the doCoreDump() and
qemuDomainSaveMemory() helper functions as users, and those in turn
end up being called by the implementation of several driver APIs.
By calling virReportError() if libvirt_iohelper has failed, we
overwrite whatever generic error message QEMU might have raised
with the more useful one generated by the helper program.
After this commit, the user will be able to see the error directly
instead of having to dig in the journal or libvirtd log.
https://bugzilla.redhat.com/show_bug.cgi?id=1578741
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virFileWrapperFdFree(), like all free functions, is supposed
to only release allocated resources, so error reporting is
better suited for virFileWrapperFdClose().
This reverts commit b0c3e93180.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Right now we're reporting errors in virFileWrapperFdFree(),
but that's hardly the appropriate place to do so, as free
functions are supposed to do nothing more than release
allocated resources.
We want to move that code back into virFileWrapperFdClose(),
but before we can do that we need to make sure the function
is actually called every time we're done processing the
wrapped file. The cleanup path is the obvious candidate.
In a couple of cases we can just move the call, but for the
remaining ones we need to duplicate it instead in order not
to alter the existing behavior. We do, however, make sure
that in all cases a failure to properly close the wrapper
results in the overall operation being reported as failed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We'll want to use this function in the cleanup path soon,
and in order to be able to do that we need to make sure we
can call it multiple times on the same virFileWrapperFd
without side effects.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace virDomainChrSourceDefFree with virObjectUnref.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Use refcounting for priv->monConfig instead of asymmetric freeing.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Change fb01e1a44 "virt-aa-helper: generate rules for gl enabled
graphics devices" implemented the detection for gl enabled
devices in virt-aa-helper. But further testing showed
that it will need much more access for the full gl stack
to work.
Upstream apparmor just recently split those things out and now
has two related abstractions at
https://gitlab.com/apparmor/apparmor/blob/master:
- dri-common at /profiles/apparmor.d/abstractions/dri-common
- mesa: at /profiles/apparmor.d/abstractions/mesa
If would be great to just include that for the majority of
rules, but they are not yet in any distribution so we need
to add rules inspired by them based on the testing that we
can do.
Furthermore qemu with opengl will also probe the backing device
of the rendernode for attributes which should be safe as
read-only wildcard rules.
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1815452
Acked-by: Jamie Strandboge <jamie@canonical.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Change fb01e1a44 "virt-aa-helper: generate rules for gl enabled
graphics devices" implemented the detection for gl enabled
devices in virt-aa-helper. But it will in certain cases e.g. if
no rendernode was explicitly specified need to read /dev/dri
which it currently isn't allowed.
Add a rule to the apparmor profile of virt-aa-helper itself to
be able to do that.
Acked-by: Jamie Strandboge <jamie@canonical.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Add a bhyveDomainDefNeedsISAController() helper function
which by domain configuration determines whether LPC controller is
required or not.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Implement the MSRs ignore unknown reads and writes feature
that's specified using:
<features>
...
<msrs unknown='ignore'>
...
</features>
in the domain XML.
In bhyve, it's just passing '-w' command line argument to the bhyve(8)
executable.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Introduce the 'msrs' feature element that controls Model Specific
Registers related behaviour. At this moment it allows only
single tunable attribute "unknown":
<msrs unknown='ignore|fault'/>
Which tells hypervisor to ignore accesses to unimplemented
Model Specific Registers. The only user of that for now is going
to be the bhyve driver.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Replace all uses where virBuffer would need clearing on the cleanup
path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
virBuffer is almost always stack-allocated, but requires freeing of the
internals on error. Introduce a VIR_AUTOCLEAN function to deal with
this.
Along with the addition add a test which would leak the buffer contents
if it weren't autocleaned.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The new utility macros are useful for variables we put on the stack but
require some cleanup. The most prominent of those is virBuffer which is
used almost exclusively in that way.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The conversion to VIR_AUTOFREE of 'escapeList' introduced memory leak of
the copied item to be escaped:
==17517== 2 bytes in 1 blocks are definitely lost in loss record 1 of 32
==17517== at 0x483880B: malloc (vg_replace_malloc.c:309)
==17517== by 0x54D666D: strdup (in /usr/lib64/libc-2.28.so)
==17517== by 0x497663E: virStrdup (virstring.c:956)
==17517== by 0x497663E: virStrdup (virstring.c:945)
==17517== by 0x48F8853: virBufferEscapeN (virbuffer.c:707)
==17517== by 0x403C9D: testBufEscapeN (virbuftest.c:383)
==17517== by 0x405FA8: virTestRun (testutils.c:174)
==17517== by 0x403A70: mymain (virbuftest.c:517)
==17517== by 0x406BC9: virTestMain (testutils.c:1097)
==17517== by 0x5470412: (below main) (in /usr/lib64/libc-2.28.so)
[...] (all other have same backtrace as it happens in a loop)
Fix it by reverting all the VIR_AUTO nonsense in this function as there
is exactly one place where it's handled.
This effectively reverts commits:
d0a92a037196fbf6df90d261ed2fb1
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
'virBufferFreeAndReset' does not free the top level structure itself.
Additionally we almost exclusively use stack'd buffers rather than
pointers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
dnsmasq documentation says that the *IPv4* prefix/network
address/broadcast address sent to dhcp clients will be automatically
determined by dnsmasq by looking at the interface it's listening on,
so the original libvirt code did not add a netmask to the dnsmasq
commandline (or later, the dnsmasq conf file).
For *IPv6* however, dnsmasq apparently cannot automatically determine
the prefix (functionally the same as a netmask), and it must be
explicitly provided in the conf file (as a part of the dhcp-range
option). So many years after IPv4 DHCP support had been added, when
IPv6 dhcp support was added the prefix was included at the end of the
dhcp-range setting, but only for IPv6.
A user had reported a bug on a host where one of the interfaces was a
superset of the libvirt network where dhcp is needed (e.g., the host's
ethernet is 10.0.0.20/8, and the libvirt network is 10.10.0.1/24). For
some reason dnsmasq was supplying the netmask for the /8 network to
clients requesting an address on the /24 interface.
This seems like a bug in dnsmasq, but even if/when it gets fixed
there, it looks like there is no harm in just always adding the
netmask to all IPv4 dhcp-range options similar to how prefix is added
to all IPv6 dhcp-range options.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This fixes a bug that has been present since the original version of
the function was pushed in commit 1ab80f3 on Nov. 26 2010 (by me). The
virSocketAddr::len was not being set.
Apparently until now we were always calling
virSocketAddrPrefixToNetmask with virSocketAddr object that was
already (coincidentally) initialized for the proper address family,
but the bug became apparent when trying to use it to fill in an
otherwise uninitialized object.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Most of the code base is fairly consistent about using the name
'uuidstr' when dealing with a formatted human-readable form, and
'uuid' when dealing with the smaller raw bytes form. Fix
snapshot_conf to comply, as well as reducing the scope of a human
string to only the error message that needs it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signal the udev thread the change of `priv->threadQuit` by using the
thread condition.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
If the udev thread is stopped, it must be ensured that the watch
handle is also removed from the main loop.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The iohelper is an internal program that's only supposed to
be called by libvirt, and whatever output it might produce
will ultimately be passed to virReportError() or similar.
Since we do not want strings passed to those functions to
contain newlines, we can simply not output them in the first
place.
This is what happens in pretty much all cases already, but
in a couple instances newlines have managed to slip in.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Commit f609cb85 (0.9.5) introduced virDomainSnapshotGetXMLDesc()'s use
of @flags as a subset of virDomainXMLFlags, documenting that 2 of the
3 flags defined at the time would never be valid. Later, commit
28f8dfdc (1.0.0) introduced a new flag, VIR_DOMAIN_XML_MIGRATABLE, but
did not adjust the snapshot documentation to declare it as invalid.
However, since the flag is not accepted as valid by any of the
drivers (remote is just passthrough; esx and vbox don't support flags;
qemu, test, and vz only support VIR_DOMAIN_XML_SECURE), and it is
unlikely that the domain state saved off during a snapshot creation
needs to be migration-friendly (as the snapshot is not the source of
a migration), it is easier to just define an explicit set of supported
flags directly related to the snapshot API rather than trying to
borrow from domain API, and risking confusion if even more domain
flags are added later (in fact, I have an upcoming patch that plans to
add a new flag to virDomainGetXMLDesc that makes no sense for
snapshots).
There is no API or ABI impact (since we purposefully used unsigned int
rather than an enum type in public API, and since the new flag name
carries the same value as the reused name).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit d2a929d4 (0.9.4) defined virDomainSaveImageGetXMLDesc()'s use
of @flags as a subset of virDomainXMLFlags, documenting that 2 of the
3 flags defined at the time would never be valid. Later, commit
28f8dfdc (1.0.0) introduced a new flag, VIR_DOMAIN_XML_MIGRATABLE, but
did not adjust the save image documentation to declare it as invalid.
Later, commit a67e3872 (3.7.0) blindly copied and pasted the same text
into virDomainManagedSaveGetXMLDesc.
However, since the flag is not accepted as valid by any of the
drivers (remote is just passthrough; and qemu is the only supporting
driver for either API, with support for just VIR_DOMAIN_XML_SECURE),
it is easier to just define an explicit set of supported flags
directly related to the save image API rather than trying to borrow
from live domain API, and risking confusion if even more domain flags
are added later (in fact, I have an upcoming patch that plans to add
a new flag to virDomainGetXMLDesc that makes no sense for saved
images). We may someday decide that saved images need to support the
_MIGRATABLE flag, as it is possible to load a saved image with a
different version of libvirt than the one that created it, but that
can be a separate patch if it is ever needed. Meanwhile, it DOES make
sense to reuse the same flags for SaveImage and for ManagedSave (since
ManagedSave is really just sugar for creating a normal SaveImage in a
location controlled by libvirt instead of by the user).
There is no API or ABI impact (since we purposefully used unsigned int
rather than an enum type in public API, and since the new flag name
carries the same value as the old reused name).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Although VIR_DOMAIN_DEF_FORMAT_INACTIVE and VIR_DOMAIN_XML_INACTIVE
happen to have the same value (1<<1), they come from different enums;
and it is nicer to reason about a 'flags' variable if all uses of
that variable are compared against the same enum type. Messed up in
commit 06f75ff2 (3.8.0).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Many drivers had a comment that they did not validate the incoming
'flags' to virDomainGetXMLDesc() because they were relying on
virDomainDefFormat() to do it instead. This used to be the case
(at least since 461e0f1a and friends in 0.9.4 added unknown flag
checking in general), but regressed in commit 0ecd6851 (1.2.12),
when all of the drivers were changed to pass 'flags' through the
new helper virDomainDefFormatConvertXMLFlags(). Since this helper
silently ignores unknown flags, we need to implement flag checking
in each driver instead.
Annoyingly, this means that any new flag values added will silently
be ignored when targeting an older libvirt, rather than our usual
practice of loudly diagnosing an unsupported flag. Add comments
in domain_conf.[ch] to remind us to be extra vigilant about the
impact when adding flags (a new flag to add data is safe if the
older server omitting the requested data doesn't break things in
the newer client; a new flag to suppress data rather than enhancing
the existing VIR_DOMAIN_XML_SECURE may form a data leak or even a
security hole).
In the qemu driver, there are multiple callers all funnelling to
qemuDomainDefFormatBufInternal(); many of them already validated
flags (and often only a subset of the full set of possible flags),
but for ease of maintenance, we can also check flags at the common
helper function.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
qemuProcessQMPStart starts a QEMU process and monitor connection that
can be used by multiple functions possibly for multiple QMP commands.
The QMP exchange to exit capabilities negotiation mode and enter command
mode can only be performed once after the monitor connection is
established.
Move responsibility for entering QMP command mode into the
qemuProcessQMP code so multiple functions can issue QMP commands in
arbitrary orders.
This also simplifies the functions using the connection provided by
qemuProcessQMPStart to issue QMP commands.
Test code now needs to call qemuMonitorSetCapabilities to send the
message to switch to command mode because the test code does not use the
qemuProcessQMP command that internally calls qemuMonitorSetCapabilities.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Multiple QEMU processes for QMP commands can operate concurrently.
Use a unique directory under libDir for each QEMU process to avoid
pidfile and unix socket collision between processes.
The pid file name is changed from "capabilities.pidfile" to "qmp.pid"
because we no longer need to avoid a possible clash with a qemu domain
called "capabilities" now that the processes artifacts are stored in
their own unique temporary directories.
"Capabilities" was changed to "qmp" in the pid file name because these
processes are no longer specific to the capabilities usecase and are
more generic in terms of being used for any general purpose QMP message
exchanges with a QEMU process that is not associated with a domain.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Users qemuProcessQMP struct were always forced to call both
qemuProcessQMPStop and qemuProcessQMPFree when they are done with the
process. We can just call qemuProcessQMPStop from qemuProcessQMPFree and
let users call qemuProcessQMPFree only.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuProcessQMPNew is one of the public functions used to create and
manage a QEMU process for QMP command exchanges outside of domain
operations.
Add descriptive comment block, debug statement and make source
consistent with the cleanup / VIR_STEAL_PTR format used elsewhere.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The monitor config data is removed from the qemuProcessQMP struct.
The monitor config data can be initialized immediately before call to
qemuMonitorOpen and does not need to be maintained after the call
because qemuMonitorOpen copies any strings it needs.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move code for setting paths and prepping file system from
qemuProcessQMPNew to qemuProcessQMPInit.
This keeps qemuProcessQMPNew limited to data structures and path
initialization is done in qemuProcessQMPInit.
The patch is a non-functional, cut / paste change, however goto is now
"cleanup" rather than "error".
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Store libDir path in the qemuProcessQMP struct in anticipation of moving
path construction code into qemuProcessQMPInit function.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All code related to QEMU monitor is moved from qemuProcessQMPNew and
qemuProcessQMPInit into qemuProcessQMPConnectMonitor.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is a replacement for qemuProcessQMPRun to make the name consistent
with qemuProcessStart. The original qemuProcessQMPRun function is
renamed as qemuProcessQMPLaunch and becomes one of the simpler functions
called from the main qemuProcessQMPStart entry point. The following
patches will move parts of the code in qemuProcessQMPLaunch to the other
functions (qemuProcessQMPInit and qemuProcessQMPConnectMonitor).
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Keep the pointer to QEMU stderr output in qemuProcessQMP struct instead
of requiring the caller to provide it (and free it).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's push the call to virQEMUCapsLogProbeFailure down the stack to
where the probing failure is detected.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While qemuProcessQMPRun and virQEMUCapsInitQMPMonitor* functions called
from virQEMUCapsInit ignore some errors, the caller of virQEMUCapsInit
would report an error unless usedQMP is true anyway. And since usedQMP
can only be true if the probing code really succeeded (i.e., no errors
were ignored), we can just simplify the logic by not ignoring the errors
in the first place.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function contains two almost identical parts. Let's consolidate them
into a single helper function and call it twice.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In new process code, move from model where qemuProcessQMP struct can be
used to activate a series of Qemu processes to model where one
qemuProcessQMP struct is used for one and only one Qemu process.
By allowing only one process activation per qemuProcessQMP struct, the
struct can safely store process outputs like status and stderr, without
being overwritten, until qemuProcessQMPFree is called.
By doing this, process outputs like status and stderr can remain stored
in the qemuProcessQMP struct without being overwritten by subsequent
process activations.
The forceTCG parameter (use / don't use KVM) will be passed when the
qemuProcessQMP struct is initialized since the qemuProcessQMP struct
won't be reused.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virQEMUCapsInitQMP now stops QEMU process in all execution paths,
before freeing the process structure.
The qemuProcessQMPStop function can be called multiple times without
problems... Won't attempt to stop processes and free resources multiple
times.
Follow the convention established in qemu_process of
1) alloc process structure
2) start process
3) use process
4) stop process
5) free process data structure
The process data structure persists after the process activation fails
or the process dies or is killed so stderr strings can be retrieved
until the process data structure is freed.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
s/qemuProcessQMPAbort/qemuProcessQMPStop/ applied to change function
name used to stop QEMU processes in process code moved from
qemu_capabilities.
No functionality change.
The new name, qemuProcessQMPStop, is consistent with the existing
function qemuProcessStop used to stop Domain processes.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
s/cmd/proc/ in process code imported from qemu_capabilities.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add the const qualifier on non modified strings
(string only copied inside qemuProcessQMPNew)
so that const strings can be used directly in calls to
qemuProcessQMPNew in future patches.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU process code in qemu_capabilities.c is moved to qemu_process.c in
order to make the code usable outside the original capabilities use
cases.
The moved code activates and manages QEMU processes without establishing
a guest domain.
This patch is a straight cut/paste move between files.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Only one of the three callers of virPCIDeviceAddressFormat correctly
handles an error return status. Fortunately it can't fail so can be
made void.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The newline was pretty arbitrary, and we're better off
without it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The memory allocated by VIR_REALLOC_N() is uninitialized,
which means it's not possible to figure out whether any
output was produced at all after the fact.
Since we don't care about the previous contents of buffers,
if any, use VIR_FREE() followed by VIR_ALLOC_N() instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Remove unused variable. Fix for [1]
[1] 821dd6d8: storage: Use VIR_AUTOFREE for storage backends
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
We dropped support in commit 8e91a40 (November 2015), but some
occurrences still remained, even in live code.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that virStorageSource is a subclass of virObject we can use
virObjectUnref and remove virStorageSourceFree which was a thin wrapper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since virStorageSource is now a subclass of virObject, we can use
VIR_AUTOUNREF instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add helper for utilizing __attribute__(cleanup())) for unref-ing
instances of sublasses of virObject.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
To allow tracking a single virStorageSource in multiple structures
without extra hassle allow refcounting by turining it into an object.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add virStorageSourceNew and refactor places allocating that structure to
use the helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Use the proper function to allocate a disk definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that we've moved all the actual code into helper
functions, we can turn it into a switch statement.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Minor tweaks to ensure compliance with our coding style.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Minor tweaks to ensure compliance with our coding style.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Minor tweaks to ensure compliance with our coding style.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The libvirt zonefile for firewalld (added in commit 3b71f2e4) does the
following:
1) lists specific services it wants to allow, then
2) uses a lower priority <reject/> rule to block all other services to
the host, and then finally,
3) relies on the zone's default "accept" policy to, accept all
forwarded traffic (since forwarded traffic is ignored by the
slightly higher priority <reject/> rule in (2)).
I had assumed that icmp traffic was either being allowed at the top of
the rules, or that it would be ignored by the <reject/> rule and
passed by the default accept policy (similar to forwarded traffic),
but this assumption was incorrect; the <reject/> rule does block icmp
traffic. This became apparent when DHCPv6 which requires ICMPv6 in
addition to udp/dhcpv6) failed to work.
This all means that in order to achieve our original goal of "similar
behavior to a default reject policy, but also allowing forwarded
traffic", we need to add rules to allow all icmp and icmpv6 traffic to
the libvirt zone, and that's what this patch does.
This is a further refinement of the resolution to
https://bugzilla.redhat.com/1650320
Signed-off-by: Laine Stump <laine@laine.org>
Acked-by: Eric Garver <eric@garver.life>
My change in 112f3a8d0f was too drastic. The @charAlias
variable is initialized only if @monitor == true. However, it is
used even outside of that condition, at which point it's just
uninitialized pointer.
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Even if an error is reported by `udev_enumerate_scan_devices`,
e.g. because a driver of a device has an bug, we can still enumerate
all other devices. Additionally the documentation of
udev_enumerate_scan_devices says that on success an integer >= 0 is
returned (see man udev_enumerate_scan_devices(3)).
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Another misleadingly named macro.
Deprecate in favor of NULLSTR_STAR.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This macro neither takes nor produces an empty string.
Remove it in favor of NULLSTR_MINUS.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
NULLSTR_EMPTY, the quiet child,
NULLSTR_STAR, the famous one and
NULLSTR_MINUS, the grumpy one.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The @tmpChr is looked up in domain definition based on user
provided chardev XML. Therefore, the alias must have been
allocated already when domain was started up.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This is basically an old artefact from 24b0821926 when the idea
was:
1) Build device string only to see if chardev has any -device
associated with it and thus if device_del is needed
2) Detach chardev using chardev_del
Now, that DEVICE and DEVICE_DELETED capabilities are assumed for
every domain 1) does not make sense anymore.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1624204
The guestfwd channels are -netdevs really. Hotunplug them as
such. Also, DEVICE_DELETED event is not triggered (surprisingly,
since we're not issuing device_del rather than netdev_del) and
associated chardev is removed automagically too. This means that
we need to do qemuDomainRemoveChrDevice() minus monitor call to
remove the chardev.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1624204
The guestfwd channels are -netdevs really. Hotplug them as such.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduced by d86c876a66.
There is no real need to have "user-" prefix for chardev.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
So far we are passing @chr to qemuBuildChrDeviceStr. This is
suboptimal (in fact wrong) because @chr is just parsed XML
definition provided by user which by definition may lack some
information. On the other hand, @tmpChr is the one that was found
using @chr in domain definition so it contains the same amount of
information or more.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The code for creating external snapshots for an offline domain
called out to qemu-img without escaping commas in the manner
that qemu-img expects. This also fixes a typo in the comment.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
commit 3bba4825 added the new function virFirewallDInterfaceSetZone()
which calledsends virDBUSCallMethod a DBusMessage** for the reply
message, but doesn't use the reply, and also doesn't free it. Since
this arg is allowed to be NULL, this patch simply sets it to NULL so
we don't have to deal with it.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If we find multiple "id=" strings during processing, then we need
to force an error since we cannot have multiple <auth>'s defined
for a single source volume.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If virDomainHostdevSubsysSCSIiSCSIDefParseXML processing finds a
duplicated <auth> structure, we should error out rather than continue.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify code to use the VIR_AUTOCLOSE logic cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than overload @ret with trying serve multiple purposes,
let's initialize @ret to -1 and introduce an @rc function return
value that can be used for functions that may return -1 or -2
and only override @ret when rc < 0.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities. This also allows
for the cleanup of some goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than having two exit paths, let's use a @retval value
and VIR_STEAL_PTR in order to unite the exit path through the
error label.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To prepare for subsequent change to use VIR_AUTOPTR logic rename
the @ret to @def.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To prepare for subsequent change to use VIR_AUTOPTR logic rename
the @ret to @def.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To prepare for subsequent change to use VIR_AUTOPTR logic rename
the @ret to @def.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To prepare for subsequent change to use VIR_AUTOPTR logic rename
the @ret to @def.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To prepare for subsequent change to use VIR_AUTOPTR logic rename
the @ret to @def.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 390c06b67 added @xml, but it was never used.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than have a need for old_dom_name, let's just VIR_FREE
the old name first, then use VIR_STEAL_PTR to handle the swap
from the old name to the new name.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than open coding virStorageFileGetRelativeBackingPath
and virStorageFileGetMetadataRecurse, let's make use of the
VIR_STEAL_PTR macro.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the need for the @name variable by directly assigning
into source->hosts[i].name.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On error from virAsprintf we would erroneously return 0 with
the @*type not being set. Change to a return -1 on error like
we should have been doing.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit a523770c3 added @retval return processing for
virStorageBackendUpdateVolInfo in order to allow a -2
to be return; however, upon successful completion
@retval = 0 and if either the virStorageBackendSCSISerial
or the virStoragePoolObjAddVol failed, the method would
return 0, but not add the @vol to the pool. So let's
just reset retval = -1 and continue processing.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than initialize to 0 and change to -1 on error, let's do the
normal operation of initializing to -1 and set to 0 on success.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's initialize @path to NULL, then rather than use two labels
free_path and out labels, let's use the cleanup: label to call
VIR_FREE(path); and VIR_FORCE_CLOSE(fd);
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than have two error paths, let's use a @retval value and
VIR_STEAL_PTR on @vgname and @pvname to unity the exit path through
the error label.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the virAsprintf of the vol->key fails, then we would erroneously
return the '0' from the @ret from virStorageBackendSheepdogParseVdiList.
So in this error path case, let's set ret = -1.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rework the logic to remove the need for the @ok_to_mklabel boolean.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than having an error path, let's rework the code to allocate
and fill into an @def variable and then steal that into @ret when we
are successful leaving just a cleanup: path.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than having an error path, let's rework the code to allocate
and fill into an @def variable and then steal that into @ret when we
are successful leaving just a cleanup: path.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make use of the auto __cleanup capabilities cleaning up any
now unnecessary goto paths.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than having an error path, let's rework the code to allocate
and fill into an @authdef variable and then steal that into @ret when
we are successful leaving just a cleanup: path.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since commit a7424faff QMP is always used.
Also, commit 932534e8 removed the last use of this apart from:
* parsing/formatting this in the caps cache
* using it as a temporary variable to know when to report an error
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
No functional change, but this will allow us to mock out the function
in the test suite
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
If 2 threads call abort for example then one of them
will hang because client will send 2 abort messages and
server will reply only on first of them, the second will be
ignored. And on server reply client changes the state only
one of abort message to complete, the second will hang forever.
There are other similar issues.
We should complete all messages waiting reply if we got
error or expected abort/finish reply from server. Also if one
thread send finish and another abort one of them will win
the race and server will either abort or finish stream. If
stream is aborted then thread requested finishing should report
error. In order to archive this let's keep stream closing reason
in @closed field. If we receive VIR_NET_OK message for stream
then stream is finished if oldest (closest to queue end) message
in stream queue is finish message and stream is aborted if oldest
message is abort message. Otherwise it is protocol error.
By the way we need to fix case of receiving VIR_NET_CONTINUE
message. Now we take oldest message in queue and check if
this is dummy message. If one thread first sends abort and
second thread then receives data then oldest message is abort
message and second thread won't be notified when data arrives.
Let's find oldest dummy message instead.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If we call virStreamFinish and virStreamAbort from 2 distinct
threads for example we can have access to freed memory.
Because when virStreamFinish finishes for example virStreamAbort
yet to be finished and it access virNetClientStreamPtr object
in stream->privateData.
Also it does not make sense to clear @driver field. After
stream is finished/aborted it is better to have appropriate
error message instead of "unsupported error".
This commit reverts [1] or virNetClientStreamPtr and
virStreamPtr will never be unrefed due to cyclic dependency.
Before this patch we don't have leaks because all execution
paths we call virStreamFinish or virStreamAbort.
[1] 8b6ffe40 : virNetClientStreamNew: Track origin stream
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
This mixing errors and EOF condition in one flag is odd.
Instead let's check st->err.code where appropriate.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Checking virNetClientStreamRaiseError without client lock
is racy which is fixed in [1] for example. Thus let's remove such checks
when we are sending message to server. And in other cases
(like virNetClientStreamRecvHole for example) let's move the check
into client stream code.
virNetClientStreamRecvPacket already have stream lock so we could
introduce another error checking function like virNetClientStreamRaiseErrorLocked
but as error is set when both client and stream lock are hold we
can remove locking from virNetClientStreamRaiseError because all
callers hold either client or stream lock.
Also let's split virNetClientStreamRaiseErrorLocked into checking
state function and checking message send status function. They are
same yet.
[1] 1b6a29c21: rpc: fix race on stream abort/finish and server side abort
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Stream server error is not propagated if thread does not have the buck.
In case we have the buck we are ok due to the code added in [1].
Let's check for stream error on all paths. Now we don't need
to raise error in virNetClientCallDispatchStream.
Old code reported error only if the first message in wait
queue awaits reply. It is odd as depends on wait queue
situation. For example if we have only TX
message in queue and in one iteration loop both send the
message and receive error then thread sending TX message did
not receive the error. Next if we have RX message (first)
and TX message (second) in queue and in one iteration
loop both send the TX message and receive error then
thread sending TX message received error. In short
it was inconsistent. Let's report error whenever
we received it and for every type of message as it makes
sense to report errors as early as possible.
[1] 16c6e2b41: Fix propagation of RPC errors from streams
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
In next patches we'll add stream state checks to this
function that applicable to all call paths. This is handy
place because we hold client lock here.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Stream abort/finish can hang because we can receive abort message
from server and yet sent abort/finish message to server. The latter
will not be answered ever because after server sends abort message
it forgets the stream and messages for unknown stream are simply ignored.
We check for stream error at the very beginning of remoteStreamFinish/remoteStreamAbort
but stream error can be set after the check in another thread operating
on stream. Let's check for stream error under client lock similar
to what's done in [1].
[1] 833b901cb: stream: Check for stream EOF
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
These functions do mostly the same things, and it would be
preferrable if they did them in mostly the same ways. This
also fixes a few violations to our code style guidelines.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The function operates on a virDomainDef and is not tied to
device address assignment in any way, so it makes more sense
for it to live along with qemuDomainIs*() and the like.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Ideally we'd make all of them static, but there are a few
cases where we don't have a virDomainDef instance handy and
so they are the only option.
For the few ones we're forced to keep exporting, document
through comments that the alternative is preferred.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Now that we have added architecture checks to all
qemuDomainIs*() functions, we no longer need to perform the
same checks separately.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
There is very little overlap in the machine types available
on different architectures, so broadly speaking checking the
machine type is usually enough; regardless, it's better to
check the architecture as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We want the signatures to be consistent, and also we're
going to start using the additional parameter next.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Make sure related functions, eg. all qemuDomainIs*(), are
close together instead of being sprinkled throughout both
the header and implementation file, and also that all
qemuDomainMachine*() functions are declared first since
we're going to make a bunch of them static later on.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
While the chances of the current checks resulting in false
positives are basically zero, it's still nicer to check for
the full prefix instead of the prefix's prefix.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
For consistency, let's use the semicolon for all definitions.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
QEMU plans to deprecate 'query-events' as it's non-extensible. Events
are also described by 'query-qmp-schema' so we can use that one instead.
This patch adds detection of events to
virQEMUCapsProbeQMPSchemaCapabilities using the same structure declaring
them for the old approach (virQEMUCapsEvents). This is possible as the
name is the same in the QMP schema and our detector supports that
trivially.
For any complex queries virQEMUCapsQMPSchemaQueries can be used in the
future.
For now we still call 'query-events' and discard the result so that it's
obvious that the tests pass. This will be cleaned up later.
https://bugzilla.redhat.com/show_bug.cgi?id=1673320
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
QEMU accidentally exposed the id of -drive (or same value as disk
serial, if provided) in one of the identifiers visible from the guest.
To avoid regression in case when -blockdev will be used we need to
always specify it ourselves.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The property allows to control the guest-visible content of the vendor
specific designator of the 'Device Identification' page of a SCSI
device's VPD (vital product data).
QEMU was leaking the id string of -drive as the value if the 'serial' of
the disk was not specified. Switching to -blockdev would impose an ABI
change.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
For SCSI, IDE, and AHCI cdroms the appropriate device types which select
the correct media are used. In qemu there's one other code path that
looks at -drive media=cdrom in the XEN pv code. Thankfully we don't
support it with qemu (see qemuBuildDiskDeviceStr). All other devices
ignore it as the comment states, thus we can drop that code.
The test fallout is expectedly only in the test added for uncommon cdrom
types.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Attempting to create an empty virtio-blk drive results into:
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0xc,drive=drive-virtio-disk1,id=virtio-disk1: Device needs media, but drive is empty
Attempting to eject media from virtio-blk based drive results into:
error: internal error: unable to execute QEMU command 'eject': Device 'drive-virtio-disk0' is not removable
Forbid configurations where users would attempt to use cdroms in virtio
bus.
Fix few wrong examples which are not really relevant to the tested code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Cast disk->bus to proper type and add missing values to the enum so it's
more obvious what types are supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The split of ide-disk into the two separate devices was introduced by
qemu commit 1f56e32a7f4b3 released in qemu v0.15.
Note that when compared to the previous commit which made sure that no
disk related tests were touched, in this case it's not as careful.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The split of scsi-disk into the two separate devices was introduced by
qemu commit b443ae67 released in qemu v0.15.
All changes to test files are not really related to disk testing thanks
to previous refactors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since commit a4cda054e7 we are using 'ide-hd' and 'ide-cd' instead of
'ide-drive'. We also should probe capabilities for 'ide-hd' instead of
'ide-drive'. It is safe to do as 'ide-drive' is the common denominator
of both 'ide-hd' and 'ide-cd' so all the properties were common.
For now the test data are modified by just changing the appropriate type
when probing for caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since commit 02e8d0cfdf we are using 'scsi-hd' and 'scsi-cd' instead of
'scsi-disk'. We also should probe capabilities for 'scsi-hd' instead of
'scsi-disk'. It is safe to do as 'scsi-disk' is the common denominator
of both 'scsi-hd' and 'scsi-cd' so all the properties were common.
For now the test data are modified by just changing the appropriate type
when probing for caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This flag tells virDomainMigrateSetMaxSpeed and
virDomainMigrateGetMaxSpeed APIs to work on post-copy migration
bandwidth.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This typed parameter for virDomainMigrate3 and virDomainMigrateToURI3
APIs may be used for setting maximum post-copy migration bandwidth.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds a new VIR_MIGRATE_PARAM_BANDWIDTH_POSTCOPY typed
parameter for virDomainMigrate3 and virDomainMigrateToURI3 for setting
maximum post-copy migration bandwidth.
In case the initial VIR_MIGRATE_PARAM_BANDWIDTH_POSTCOPY value turns out
to be suboptimal a new VIR_DOMAIN_MIGRATE_MAX_SPEED_POSTCOPY flag for
virDomainMigrateSetMaxSpeed and virDomainMigrateGetMaxSpeed may be used
to set/get the maximum post-copy migration bandwidth while migration is
already running.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
So far migration parameters were changed only at the beginning of
migration mostly via an automatic translation from flags and typed
parameters. We need to export a few more functions to support APIs which
may set migration parameters while migration is already running.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's make the code flow easier to follow and get rid of the ugly endjob
label inside if branch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some migration parameters supported by libvirt may use units that differ
from the units used by QEMU for the corresponding parameters. For
example, libvirt defines migration bandwidth in MiB/s while QEMU expects
B/s. Let's add a unit field to qemuMigrationParamsTPMapItem for
automatic conversion when translating between libvirt's migration typed
parameters and QEMU's migration paramteres.
This patch is a preparation for future parameters as the existing
VIR_MIGRATE_PARAM_BANDWIDTH parameter is set using "migrate_set_speed"
QMP command rather than "migrate-set-parameters" for backward
compatibility.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuDomainBlockPivot and qemuDomainBlockJobAbort need the job name for
cancelling or pivoting but were generating it locally instead of
accessing the existing copy in the job data structure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The writing to an image actually starts when the copy job is initiated,
so checking this at the time of the pivot operation is too late.
Move the check to qemuDomainBlockCopyCommon. Note that modern qemu would
have prevented two writers with qcow2 so the slim possibility of a job
started with libvirtd without this patch missing the check is not really
worth worrying about.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For copy and active commit jobs we record the state of the mirror so
that we can recover. The status XML was not saved in case of
qemuDomainBlockPivot due to an oversight.
Save the XML always when invoking qemuDomainBlockJobAbort even if
the job is not currently tracking any state. This will change later and
also this is not a particularly hot code path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the container is really a simple one (init is just bash and
the whole root is passed through) then virDomainReboot and
virDomainShutdown will talk to the actual init within the host.
Therefore, 'virsh shutdown $dom' will result in shutting down the
host. True, at that point the container is shut down too but
looks a bit harsh to me.
The solution is to check if the init inside the container is or
is not the same as the init running on the host.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
So far the virInitctlSetRunLevel() is fully automatic. It finds
the correct fifo to use to talk to the init and it will set the
desired runlevel. Well, callers (so far there is just one) will
need to inspect the fifo a bit just before the runlevel is set.
Therefore, expose the internal list of fifos and also allow
caller to explicitly use one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Due to a bug the seclabels are restored before any PID in the
container is killed. This should be done afterwards in
virLXCProcessCleanup.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Prior to rewrite of cgroup code we only had one backend to try.
After the rewrite the virCgroupBackendGetAll() returns both
backends (for v1 and v2). However, not both have to really be
present on the system which results in killRecursive callback
failing which in turn might mean we won't try the other backend.
At the same time, this function reports no error as it should.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Not that it would matter because LXC driver doesn't differentiate
the job types so far, but nevertheless the Destroy() should grab
LXC_JOB_DESTROY.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The number of iothreads is not part of the vm state sent during
migration, nor exposed to the guest ABI, so this restriction is
a mistake in libvirt. Let's remove that bit of code.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jie Wang <wangjie88@huawei.com>
The checks and error messages are mostly the same across
all virtio-input devices, so we can avoid having multiple
copies of the same code.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It will not work. This breaks qemu capabilities probing as a user.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
For normal starts (no incoming migration) the refresh of the QEMU
state must be done before the VCPUs getting started since otherwise
there might be a race condition between a possible shutdown of the
guest OS and the QEMU monitor queries.
This fixes "qemu: migration: Refresh device information after
transferring state" (93db7eea1b).
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
If a domain has a disk that is type='network' we require specific
cache mode to allow migration with it (either 'directsync' or
'none'). This doesn't make much sense since network disks are
supposed to be safe to migrate by default.
At the same time, we should be checking for the actual source
type, not apparent type set in the domain XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Storage pools might want to specify format of the image when translating
the volume thus we can't add any default format when parsing the XML.
Add a explicit format when starting the VM and format is not present
neither by user specifying it nor by the storage pool translation
function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Post parse callback adds the 'raw' type only for local files. Remote
files can also have backing store (even local) so we should do this also
for network backed storage.
Note that virStorageFileGetMetadata always considers files with no type
as raw so we will not accidentally traverse the backing chain and allow
unexpected files being labelled with svirt labels.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit f80eae8c2a I was too agresive in removing properties of
-drive for empty drives. It turns out that qemu actually persists the
state of 'readonly' and the throttling information even for the empty
drive.
Removing 'readonly' thus made qemu open any subsequent images added via
the 'change' command as RW which was forbidden by selinux thanks to the
restrictive sVirt label for readonly media.
Fix this by formating the property again and bump the tests and leave a
note detailing why the rest of the properties needs to be skipped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>). VIR_ONCE_GLOBAL_INIT is almost
exclusively called without an ending semicolon, but let's
standardize on using one like the other macros.
Add a dummy struct definition at the end of the macro, so
the compiler will require callers to add a semicolon.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_LOG_INIT calls.
Drop the semicolon from the final statement of the macro, so
the compiler will require callers to add a semicolon.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_IMPL calls.
Move the verify() statement to the end of the macro and drop
the semicolon, so the compiler will require callers to add a
semicolon.
While we are touching these call sites, standardize on putting
the closing parenth on its own line, as discussed here:
https://www.redhat.com/archives/libvir-list/2019-January/msg00750.html
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_DECL calls.
Drop the semicolon from the final statement of the macro, so
the compiler will require callers to add a semicolon.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Just before pushing the series containing commit 3bba4825 I had added
a "return true" to the top of virFirewallDZoneExists() to measure the
impact of calling that function once per network during startup. I
found that the effect was minimal, but forgot to remove the "return
true" before pushing. This unfortunately causes a failure to start
networks on systems that have a firewalld version that doesn't support
our libvirt zone file (i.e. pretty much everyone).
This patch removes the unintended line.
Signed-off-by: Laine Stump <laine@laine.org>
When using custom command line arguments, warn that
this configuration is not fully supported.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
- Remove ATTRIBUTE_UNUSED for the "buf" argument, it's
not unused
- Indent fix
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since we're setting the zone anyway, it will be useful to allow
setting a different (custom) zone for each network. This will be done
by adding a "zone" attribute to the "bridge" element, e.g.:
...
<bridge name='virbr0' zone='myzone'/>
...
If a zone is specified in the config and it can't be honored, this
will be an error.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This patch restores broken guest network connectivity after a host
firewalld is switched to using an nftables backend. It does this by
adding libvirt networks' bridge interfaces to the new "libvirt" zone
in firewalld.
After this patch, the bridge interface of any network created by
libvirt (when firewalld is active) will be added to the firewalld
zone called "libvirt" if it exists (regardless of the firewalld
backend setting). This behavior does *not* depend on whether or not
libvirt has installed the libvirt zone file (set with
"--with[out]-firewalld-zone" during the configure phase of the package
build).
If the libvirt zone doesn't exist (either because the package was
configured to not install it, or possibly it was installed, but
firewalld doesn't support rule priorities, resulting in a parse
error), the bridge will remain in firewalld's default zone, which
could be innocuous (in the case that the firewalld backend is
iptables, guest networking will still function properly with the
bridge in the default zone), or it could be disastrous (if the
firewalld backend is nftables, we can be assured that guest networking
will fail). In order to be unobtrusive in the former case, and
informative in the latter, when the libvirt zone doesn't exist we
then check the firewalld version to see if it's new enough to support
the nftables backend, and then if the backend is actually set to
nftables, before logging an error (and failing the net-start
operation, since the network couldn't possibly work anyway).
When the libvirt zone is used, network behavior is *slightly*
different from behavior of previous libvirt. In the past, libvirt
network behavior would be affected by the configuration of firewalld's
default zone (usually "public"), but now it is affected only by the
"libvirt" zone), and thus almost surely warrants a release note for
any distro upgrading to libvirt 5.1 or above. Although it's
unfortunate that we have to deal with a mandatory behavior change, the
architecture of multiple hooks makes it impossible to *not* change
behavior in some way, and the new behavior is arguably better (since
it will now be possible to manage access to the host from virtual
machines vs from public interfaces separately).
Creates-and-Resolves: https://bugzilla.redhat.com/1650320
Resolves: https://bugzilla.redhat.com/1638342
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In the past (when both libvirt and firewalld used iptables), if either
libvirt's rules *OR* firewalld's rules accepted a packet, it would
be accepted. This was because libvirt and firewalld rules were
processed during the same kernel hook, and a single ACCEPT result
would terminate the rule traversal and cause the packet to be
accepted.
But now firewalld can use nftables for its backend, while libvirt's
firewall rules are still using iptables; iptables rules are still
processed, but at a different time during packet processing
(i.e. during a different hook) than the firewalld nftables rules. The
result is that a packet must be accepted by *BOTH* the libvirt
iptables rules *AND* the firewalld nftable rules in order to be
accepted.
This causes pain because
1) libvirt always adds rules to permit DNS and DHCP (and sometimes
TFTP) from guests to the host network's bridge interface. But
libvirt's bridges are in firewalld's "default" zone (which is usually
the zone called "public"). The public zone allows ssh, but doesn't
allow DNS, DHCP, or TFTP. So even though libvirt's rules allow the
DHCP and DNS traffic, the firewalld rules (now processed during a
different hook) dont, thus guests connected to libvirt's bridges can't
acquire an IP address from DHCP, nor can they make DNS queries to the
DNS server libvirt has setup on the host. (This could be solved by
modifying the default firewalld zone to allow DNS and DHCP, but that
would open *all* interfaces in the default zone to those services,
which is most likely not what the host's admin wants.)
2) Even though libvirt adds iptables rules to allow forwarded traffic
to pass the iptables hook, firewalld's higher level "rich rules" don't
yet have the ability to configure the acceptance of forwarded traffic
(traffic that is going somewhere beyond the host), so any traffic that
needs to be forwarded from guests to the network beyond the host is
rejected during the nftables hook by the default zone's "default
reject" policy (which rejects all traffic in the zone not specifically
allowed by the rules in the zone, whether that traffic is destined to
be forwarded or locally received by the host).
libvirt can't send "direct" nftables rules (firewalld only supports
direct/passthrough rules for iptables), so we can't solve this problem
by just sending explicit nftables rules instead of explicit iptables
rules (which, if it could be done, would place libvirt's rules in the
same hook as firewalld's native rules, and thus eliminate the need for
packets to be accepted by both libvirt's and firewalld's own rules).
However, we can take advantage of a quirk in firewalld zones that have
a default policy of "accept" (meaning any packet that doesn't match a
specific rule in the zone will be *accepted*) - this default accept will
also accept forwarded traffic (not just traffic destined for the host).
Of course we don't want to modify firewalld's default zone in that
way, because that would affect the filtering of traffic coming into
the host from other interfaces using that zone. Instead, we will
create a new zone called "libvirt". The libvirt zone will have a
default policy of accept so that forwarded traffic can pass and list
specific services that will be allowed into the host from guests (DNS,
DHCP, SSH, and TFTP).
But the same default accept policy that fixes forwarded traffic also
causes *all* traffic from guest to host to be accepted. To close this
new hole, the libvirt zone can take advantage of a new feature in
firewalld (currently slated for firewalld-0.7.0) - priorities for rich
rules - to add a low priority rule that rejects all local traffic (but
leaves alone all forwarded traffic).
So, our new zone will start with a list of services that are allowed
(dhcp, dns, tftp, and ssh to start, but configurable via any firewalld
management application, or direct editing of the zone file in
/etc/firewalld/zones/libvirt.xml), followed by a low priority
<reject/> rule (to reject all other traffic from guest to host), and
finally with a default policy of accept (to allow forwarded traffic).
This patch only creates the zonefile for the new zone, and implements
a configure.ac option to selectively enable/disable installation of
the new zone. A separate patch contains the necessary code to actually
place bridge interfaces in the libvirt zone.
Why do we need a configure option to disable installation of the new
libvirt zone? It uses a new firewalld attribute that sets the priority
of a rich rule; this feature first appears in firewalld-0.7.0 (unless
it has been backported to am earlier firewalld by a downstream
maintainer). If the file were installed on a system with firewalld
that didn't support rule priorities, firewalld would log an error
every time it restarted, causing confusion and lots of extra bug
reports.
So we add two new configure.ac switches to avoid polluting the system
logs with this error on systems that don't support rule priorities -
"--with-firewalld-zone" and "--without-firewalld-zone". A package
builder can use these to include/exclude the libvirt zone file in the
installation. If firewalld is enabled (--with-firewalld), the default
is --with-firewalld-zone, but it can be disabled during configure
(using --without-firewalld-zone). Targets that are using a firewalld
version too old to support the rule priority setting in the libvirt
zone file can simply add --without-firewalld-zone to their configure
commandline.
These switches only affect whether or not the libvirt zone file is
*installed* in /usr/lib/firewalld/zones, but have no effect on whether
or not libvirt looks for a zone called libvirt and tries to use it.
NB: firewalld zones can only be added to the permanent config of
firewalld, and won't be loaded/enabled until firewalld is restarted,
so at package install/upgrade time we have to restart firewalld. For
rpm-based distros, this is done in the libvirt.spec file by calling
the %firewalld_restart rpm macro, which is a part of the
firewalld-filesystem package. (For distros that don't use rpm
packages, the command "firewalld-cmd --reload" will have the same
effect).
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
virFirewallDGetBackend() reports whether firewalld is currently using
an iptables or an nftables backend.
virFirewallDGetVersion() learns the version of the firewalld running
on this system and returns it as 1000000*major + 1000*minor + micro.
virFirewallDGetZones() gets a list of all currently active firewalld
zones.
virFirewallDInterfaceSetZone() sets the firewalld zone of the given
interface.
virFirewallDZoneExists() can be used to learn whether or not a
particular zone is present and active in firewalld.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In preparation for adding several other firewalld-specific functions,
separate the code that's unique to firewalld from the more-generic
"firewall" file.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Support for firewalld is a feature that can be selectively enabled or
disabled (using --with-firewalld/--without-firewalld), not merely
something that must be accounted for in the code if it is present with
no exceptions. It is more consistent with other usage in libvirt to
use WITH_FIREWALLD rather than HAVE_FIREWALLD.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1657468
Commit be1bb6c95 changed the way volumes were stored from a forward
linked list to a hash table. In doing so, it required that each vol
object would have 3 unique values as keys into tables - key, name,
and path. Due to how vHBA/NPIV LUNs are created/used this resulted
in a failure to utilize all the LUN's found during processing.
During virStorageBackendSCSINewLun processing fetch the key (or
serial value) for NPIV LUN's using virStorageFileGetNPIVKey which
will formulate a more unique key based on the serial value and
the port for the LUN.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The vHBA/NPIV LUNs created via the udev processing of the
VPORT_CREATE command end up using the same serial value
as seen/generated by the /lib/udev/scsi_id as returned
during virStorageFileGetSCSIKey. Therefore, in order to
generate a unique enough key to be used when adding the
LUN as a volume during virStoragePoolObjAddVol a more
unique key needs to be generated for an NPIV volume.
The problem is illustrated by the following example, where
scsi_host5 is a vHBA used with the following LUNs:
$ lsscsi -tg
...
[5:0:4:0] disk fc:0x5006016844602198,0x101f00 /dev/sdh /dev/sg23
[5:0:5:0] disk fc:0x5006016044602198,0x102000 /dev/sdi /dev/sg24
...
Calling virStorageFileGetSCSIKey would return:
/lib/udev/scsi_id --device /dev/sdh --whitelisted --replace-whitespace /dev/sdh
350060160c460219850060160c4602198
/lib/udev/scsi_id --device /dev/sdh --whitelisted --replace-whitespace /dev/sdi
350060160c460219850060160c4602198
Note that althrough /dev/sdh and /dev/sdi are separate LUNs, they
end up with the same serial number used for the vol->key value.
When virStoragePoolFCRefreshThread calls virStoragePoolObjAddVol
the second LUN fails to be added with the following message
getting logged:
virHashAddOrUpdateEntry:341 : internal error: Duplicate key
To resolve this, virStorageFileGetNPIVKey will use a similar call
sequence as virStorageFileGetSCSIKey, except that it will add the
"--export" option to the call. This results in more detailed output
which needs to be parsed in order to formulate a unique enough key
to be used. In order to be unique enough, the returned value will
concatenate the target port as returned in the "ID_TARGET_PORT"
field from the command to the "ID_SERIAL" value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Alter the code to use the virStorageFileGetSCSIKey helper
to fetch the unique key for the SCSI disk. Alter the logic
to follow the former code which would return a duplicate
of @dev when either the virCommandRun succeeded, but returned
an empty string or when WITH_UDEV was not true.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Alter the "real" code to return -2 on virCommandRun failure.
Alter the comments and function header to describe the function
and its returns.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1503284
The way we currently start qemu from CPU affinity POV is as
follows:
1) the child process is set affinity to all online CPUs (unless
some vcpu pinning was given in the domain XML)
2) Once qemu is running, cpuset cgroup is configured taking
memory pinning into account
Problem is that we let qemu allocate its memory just anywhere in
1) and then rely in 2) to be able to move the memory to
configured NUMA nodes. This might not be always possible (e.g.
qemu might lock some parts of its memory) and is very suboptimal
(copying large memory between NUMA nodes takes significant amount
of time).
The solution is to set affinity to one of (in priority order):
- The CPUs associated with NUMA memory affinity mask
- The CPUs associated with emulator pinning
- All online host CPUs
Later (once QEMU has allocated its memory) we then change this
again to (again in priority order):
- The CPUs associated with emulator pinning
- The CPUs returned by numad
- The CPUs associated with vCPU pinning
- All online host CPUs
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This is mainly about /dev/sev and its default permissions 0600. Of
course, rule of 'tinfoil' would be that we can't trust anything, but the
probing code in QEMU is considered safe from security's perspective + we
can't create an udev rule for this at the moment, because ioctls and
file system permissions aren't cross-checked in kernel and therefore a
user with read permissions could issue a 'privileged' operation on SEV
which is currently only limited to root.
https://bugzilla.redhat.com/show_bug.cgi?id=1665400
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The default permissions (0600 root:root) are of no use to the qemu
process so we need to change the owner to qemu iff running with
namespaces.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of exposing /dev/sev to every domain, do it selectively.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
SEV has a limit on number of concurrent guests. From security POV we
should only expose resources (any resources for that matter) to domains
that truly need them.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We should not give domains access to something they don't necessarily
need by default. Remove it from the qemu driver docs too.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
virtio-mmio is still used by default, so if PCI is desired
it's necessary to explicitly opt-in by adding an appropriate
<address type='pci' domain='0x0000' ... />
element to the corresponding device.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This adds an additional directive to the dnsmasq configuration file that
notifies clients via dhcp about the link's MTU. Guests can then choose
adjust their link accordingly.
Signed-off-by: Casey Callendrello <cdc@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The 'qemu' binary used to provide the i386 emulator until it was renamed
to qemu-system-i386 in QEMU 1.0. Since we don't support such old
versions we don't need to check for 'qemu' when probing capabilities.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The custom namespaces were originally registered against the storage
pool source struct, but during review this was changed to the top level
storage pool struct. The namespace URIs were not updated to match, so
had a redundant '/source' component.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Some clients poll virDomainGetBlockJobInfo rather than wait for the
VIR_DOMAIN_BLOCK_JOB_READY event. In some cases qemu can get to 100% and
still not reach the synchronised phase. Initiating a pivot in that case
will fail.
Given that computers are interacting here, the error that the job
can't be finalized yet is not handled very well by those specific
implementations.
Our docs now correctly state to use the event. We already do a similar
output adjustment in case when the progress is not available from qemu
as in that case we'd report 0 out of 0, which some apps also incorrectly
considered as 100% complete.
In this case we subtract 1 from the progress if the ready state is not
signalled by qemu if the progress was at 100% otherwise.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
A copy+paste mistaken meant the wrong enum -> string convertor
function was used for the error when an incorrect feature capability was
used.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
PEP 8 says:
"Comparisons to singletons like None should always be done
with 'is' or 'is not', never the equality operators."
There are potentially semantics differences, though in the case of this
libvirt code its merely a style change:
http://jaredgrubb.blogspot.com/2009/04/python-is-none-vs-none.html
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virDomainDeviceInfo parameter is a large struct so it is preferrable
to pass it by reference instead of by value.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The struct _virStorageBackendQemuImgInfo is quite large so it is
preferrable to pass it by reference instead of by value. This requires
us to stop modifying the "compat" field.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'rv' variable is never changed after being declared, so can be
removed.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
'val' is initialized from virDomainCapsFeatureTypeFromString and a
few lines earlier there was already a check for 'val < 0'.
The 'val >= 0' is thus always true. The enum conversion similarly
ensures that the val will be less than VIR_DOMAIN_CAPS_FEATURE_LAST,
so "val < VIR_DOMAIN_CAPS_FEATURE_LAST' is thus always true too.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Be more sensible when setting labels of the target of a
virDomainBlockCopy operation. Previously we'd relabel everything in case
it's a copy job even if there's no unlabelled backing chain. Since we
are also not sure whether the backing chain is shared we don't relabel
the chain on completion of the blockjob. This certainly won't play nice
with the image permission relabelling feature.
While this does not fix the case where the image is reused and has
backing chain it certainly sanitizes all the other cases. Later on it
will also allow to do the correct thing in cases where only one layer
was introduced.
The change is necessary as in case when -blockdev will be used we will
need to hotplug the backing chain and thus labeling needs to be setup in
advance and not only at the time of pivot. To avoid multiple code paths
move the labeling now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Rather than passing in a virStorageSource which would override the
originally passed disk->src we can now drop passing in a disk completely
as all functions called inside here require a virStorageSource.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use the functions designed to deal with single images as the *Disk
functions were just wrappers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Previously there weren't any suitable functions which would allow
setting up host side of a full disk chain so we've opted to replace the
'src' in a virDomainDiskDef by the new image source.
That is now no longer necessary so remove the munging.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Now that we have replacement in the form of the image labeling function
we can drop the unnecessary functions by replacing all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The same can be achieved by using qemuSecurity[Set|Restore]ImageLabel.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The flag will control the VIR_SECURITY_DOMAIN_IMAGE_LABEL_BACKING_CHAIN
flag of the security driver image labeling APIs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Security labeling of disks consists of labeling of the disk image
itself and it's backing chain. Modify
virSecurityManager[Set|Restore]ImageLabel to take a boolean flag that
will label the full chain rather than the top image itself.
This allows to delete/unify some parts of the code and will also
simplify callers in some cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since the disk is necessary only to get the source modify the functions
to take the source directly and rename them to
qemu[Setup|Teardown]ImageChainCgroup.
Additionally drop a pointless comment containing the old function name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When we need to detect a chain for a image which will become the new
source for a disk (e.g. after a disk media change or a blockjob) we'd
need to replace disk->src temporarily to do so.
Move the 'disksrc' temporary variable to an argument and adjust callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The function at first validates the top image of the chain, then
traverses the chain as declared in the XML (if any) and then procedes to
detect the rest of the chain from images. All of the steps have their
own temporary iterator.
Clarify the use scope of the steps by introducing a new temp variable
holding the top level source and adding comments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Allow for adjustment of RBD configuration options via Storage
Pool XML Namespace adjustments. When namespace arguments are
used to start the pool, add a VIR_WARN to indicate that the
startup was tainted by custom config_opts.
Based off original patch/concept:
https://www.redhat.com/archives/libvir-list/2014-May/msg00940.html
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If the Storage Pool Namespace XML data exists, format the mount
options on the MOUNT command line and issue a VIR_WARN to indicate
that the storage pool was tainted by custom mount_opts.
When the pool is started, the options will be generated on the
command line along with the options already defined.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce the virStoragePoolFSMountOptionsDef to be used to
manage the Storage Pool XML Namespace for mount options.
Using a new virStorageBackendNamespaceInit function, set the
virStoragePoolXMLNamespace into the _virStoragePoolOptions when
the storage backend is loaded.
Modify the storagepool.rng to allow for the usage of a different
XML namespace to parse the fs_mount_opts to be included with
the fs and netfs storage pool definitions.
Modify the storagepoolxml2xmltest to utilize a properly modified
XML file to parse and format the namespace for a netfs storage pool.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce the infrastructure necessary to manage a Storage Pool XML
Namespace. The general concept is similar to virDomainXMLNamespace,
except that for Storage Pools the storage backend specific details
can be stored within the _virStoragePoolOptions unlike the domain
processing code which manages its xmlopt's via the virDomainXMLOption
which is allocated/passed around for each domain.
This patch defines the add the parse, format, free, and href methods
required to process the XML and callout from the Storage Pool Def
parse, format, and free API's to perform the action on the XML data
for/from the backend.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If protocolVer present, add the -o nfsvers=# to the command
line for the NFS Storage Pool
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add an optional way to define which NFS Server version will be
used to content the target NFS server.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1584663
Modify the command generation to add some default options to the
fs/netfs storage pools based on the OS type. For Linux, it'll be
the "nodev, nosuid, noexec". For FreeBSD, it'll be "nosuid, noexec".
For others, just leave the options alone.
Modify the storagepoolxml2argvtest to handle the fact that the
same input XML could generate different output XML based on whether
Linux, FreeBSD, or other was being built.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Rather than deref off of "caps->guests", let's pass "caps->guests" and
caps->nguests to have the helper use "guests[i]->" instead.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Let's extract out the <guest> code into it's own method/helper.
NB: One minor change between the two is usage of "buf" instead
of "&buf" in the new code since we pass the address of &buf to
the helper.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Rather than deref off of "caps->host.", let's pass "&caps->host"
and make the helper use "host->" instead.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Let's extract out the <host> code into it's own method/helper.
NB: One minor change between the two is usage of "buf" instead
of "&buf" in the new code since we pass the address of &buf to
the helper.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
This reverts commit 8b035c84d8.
The MTTCG impl in QEMU does allow pinning vCPUs.
When the guest is running we already check if pinning is
possible in the qemuDomainPinVcpuLive method, so this
check was adding no benefit.
When the guest is not running, we cannot know whether the
subsequent launch will use MTTCG or TCG, so we must allow
the pinning request. If the guest does use TCG on the next
launch it will fail, but this is no worse than if the user
had done a virDomainDefineXML with an XML doc specifying
vCPU pinning.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
MTTCG is the new multi-threaded impl of TCG which follows
KVM in having one host OS thread per vCPU. Historically
we have discarded all PIDs reported for TCG guests, but
we must now selectively honour this data.
We don't have anything in the domain XML that indicates
whether a guest is using TCG or MTTCG. While QEMU does
have an option (-accel tcg,thread=single|multi), it is
not desirable to expose this in libvirt. QEMU will
automatically use MTTCG when the host/guest architecture
pairing is known to be safe. Only developers of QEMU TCG
have a strong reason to override this logic.
Thus we use two sanity checks to decide if the vCPU
PID information is usable. First we see if the PID
duplicates the main emulator PID, and second we see
if the PID duplicates any other vCPUs.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The transition to the ready state is best observed by events as it's
ansynchronous and does not hint users to do polling. As currently only
the qemu driver supports block copy and block commit and the ready state
event was introduced by qemu 1.3 we can fully switch to the new
approach.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The documentation was only referring to a copy job, but in fact any
running blockjob will have the same results.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add documentation that the 'VIR_DOMAIN_BLOCK_COPY_TRANSIENT_JOB' flag
is auto-assumed if the block copy job is started while the VM is
transient and remove the restriction to define the domain when copy
is running.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
