This allows:
a) migration without access to network
b) complete control of the migration stream
c) easy migration between containerised libvirt daemons on the same host
Resolves: https://bugzilla.redhat.com/1638889
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
A long time ago we introduced a dummy tap device (e.g. virbr0-nic) that
we attached to the bridge device created for virtual networks:
commit 5754dbd56d
Author: Laine Stump <laine@redhat.com>
Date: Wed Feb 9 03:28:12 2011 -0500
Give each virtual network bridge its own fixed MAC address
This was a hack to workaround a Linux kernel bug where it would not
honour any attempt to set a MAC address on a bridge. Instead the
bridge would adopt the numerically lowest MAC address of all NICs
attached to the bridge. This lead to the MAC addrss of the bridge
changing over time as NICs were attached/detached.
The Linux bug was actually fixed 3 years before the libvirt
workaround was added in:
commit 92c0574f11598c8036f81e27d2e8bdd6eed7d76d
Author: Stephen Hemminger <shemminger@vyatta.com>
Date: Tue Jun 17 16:10:06 2008 -0700
bridge: make bridge address settings sticky
Normally, the bridge just chooses the smallest mac address as the
bridge id and mac address of bridge device. But if the administrator
has explictly set the interface address then don't change it.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
but libvirt needed to support RHEL-5 kernels at that time, so
none the less added the workaround.
We have long since dropped support for RHEL-5 vintage distros,
so there's no reason to keep the dummy tap device for the purpose
of setting the bridge MAC address.
Later the dummy TAP device was used for a second purpose related
to IPv6 DAD (Duplicate Address Detection) in:
commit db488c7917
Author: Benjamin Cama <benoar@dolka.fr>
Date: Wed Sep 26 21:02:20 2012 +0200
network: fix dnsmasq/radvd binding to IPv6 on recent kernels
This was again dealing with a regression in the Linux kernel, where
if there were no devices attached to the bridge in the UP state,
IPv6 DAD would not be performed. The virbr0-nic was attached but
in the DOWN state, so the above libvirt fix tenporarily brought
the NIC online. The Linux commit causing the problem was in v2.6.38
commit 1faa4356a3bd89ea11fb92752d897cff3a20ec0e
Author: stephen hemminger <shemminger@vyatta.com>
Date: Mon Mar 7 08:34:06 2011 +0000
bridge: control carrier based on ports online
A short while later Linux was tweaked so that DAD would still occur
if the bridge had no attached devices at all in 3.1:
commit b64b73d7d0c480f75684519c6134e79d50c1b341
Author: stephen hemminger <shemminger@vyatta.com>
Date: Mon Oct 3 18:14:45 2011 +0000
bridge: leave carrier on for empty bridge
IOW, the only reason we need the DAD hack of bringing virbr0-nic
online is because virbr0-nic exists. Once it doesn't exist, then
we hit the "empty bridge" case which works in Linux.
We can rely on distros having Linux kernel >= 3.1, so both things
that the virbr0-nic are doing are redundant.
Fixes https://gitlab.com/libvirt/libvirt/-/issues/53
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Consider a host with 8 CPUs. There are the following possible scenarios
1. Bare metal; libvirtd has affinity of 8 CPUs; QEMU should get 8 CPUs
2. Bare metal; libvirtd has affinity of 2 CPUs; QEMU should get 8 CPUs
3. Container has affinity of 8 CPUs; libvirtd has affinity of 8 CPus;
QEMU should get 8 CPUs
4. Container has affinity of 8 CPUs; libvirtd has affinity of 2 CPus;
QEMU should get 8 CPUs
5. Container has affinity of 4 CPUs; libvirtd has affinity of 4 CPus;
QEMU should get 4 CPUs
6. Container has affinity of 4 CPUs; libvirtd has affinity of 2 CPus;
QEMU should get 4 CPUs
Scenarios 1 & 2 always work unless systemd restricted libvirtd privs.
Scenario 3 works because libvirt checks current affinity first and
skips the sched_setaffinity call, avoiding the SYS_NICE issue
Scenario 4 works only if CAP_SYS_NICE is availalbe
Scenarios 5 & 6 works only if CAP_SYS_NICE is present *AND* the cgroups
cpuset is not set on the container.
If libvirt blindly ignores the sched_setaffinity failure, then scenarios
4, 5 and 6 should all work, but with caveat in case 4 and 6, that
QEMU will only get 2 CPUs instead of the possible 8 and 4 respectively.
This is still better than failing.
Therefore libvirt can blindly ignore the setaffinity failure, but *ONLY*
ignore it when there was no affinity specified in the XML config.
If user specified affinity explicitly, libvirt must report an error if
it can't be honoured.
Resolves: https://bugzilla.redhat.com/1819801
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The conditional was removed in
commit ebbf8ebe4f
Author: Ján Tomko <jtomko@redhat.com>
Date: Tue Sep 1 22:56:37 2020 +0200
util: virnetdevtap: stats: fix txdrop on FreeBSD
That commit was correct about this no longer being required for FreeBSD,
but missed that the code is also built on macOS.
Rather than testing for this field in meson though, we can simply use
a platform conditional test in the code.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Local socket connections were outright disabled because there was no "server"
part in the URI. However, given how requirements and usage scenarios are
evolving, some management apps might need the source libvirt daemon to connect
to the destination daemon over a UNIX socket for peer2peer migration. Since we
cannot know where the socket leads (whether the same daemon or not) let's decide
that based on whether the socket path is non-standard, or rather explicitly
specified in the URI. Checking non-standard path would require to ask the
daemon for configuration and the only misuse that it would prevent would be a
pretty weird one. And that's not worth it. The assumption is that whenever
someone uses explicit UNIX socket paths in the URI for migration they better
know what they are doing.
Partially resolves: https://bugzilla.redhat.com/1638889
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Adds new typed param for migration and uses this as a UNIX socket path that
should be used for the NBD part of migration. And also adds virsh support.
Partially resolves: https://bugzilla.redhat.com/1638889
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
For this we need to make the function accessible (at least privately). The
behaviour will change in following patches and the test helps explaining the
change.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Clean up the semantics by using one extra self-describing variable.
This also fixes the port allocation when the port is specified.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Instead of saving some data from a union up front and changing an overlayed
struct before using said data, let's just set the new values after they are
decided. This will increase the readability of future commit(s).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In 6.7.0 release I've changed how domain namespace is built and
populated. Previously it used to be done from a pre-exec hook
(ran in the forked off child, just before dropping all privileges
and exec()-ing QEMU), which not only meant we had to have two
different code paths for creating a node in domain's namespace
(one for this pre-exec hook, the other for hotplug ran from the
daemon), it also proved problematic because it was leaking FDs
into QEMU process.
To mitigate this problem, we've not only ditched libdevmapper
from the NS population process, I've also dropped the pre-exec
code and let the NS be populated from the daemon (using the
hotplug code). But, I was not careful when doing so, because the
pre-exec code was tolerant to files that doesn't exist, while
this new code isn't. For instance, the very first thing that is
done when the new NS is created is it's populated with
@defaultDeviceACL which contain files like /dev/null, /dev/zero,
/dev/random and /dev/kvm (and others). While the rest will
probably exist every time, /dev/kvm might not and thus the new
code I wrote has to be tolerant to that.
Of course, users can override the @defaultDeviceACL (by setting
cgroup_device_acl in qemu.conf) and remove /dev/kvm (which is
acceptable workaround), but we definitely want libvirt to work
out of the box even on hosts without KVM.
Fixes: 9048dc4e62
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For older FreeBSD, we needed an ifdef guard to use
if_data.ifi_oqdrops, which was introduced by:
commit 61bbdbb94c
Implement interface stats for BSD
But when we dropped the check because we deprecated
building on FreeBSD-10 in:
commit 83131d9714
configure: drop check for unsupported FreeBSD
We started building the wrong side of the ifdef.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 83131d9714
Reviewed-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
We need to use @default_auth@ in the augeas test case to match
its use in the main libvirtd.conf.in file.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
BSD sed(1) and GNU sed(1) syntax are not compatible, and as
synax-check.mk uses the GNU flavor, set SED variable to
'gsed' by default.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
As it turned out my previous commits which switched from HAVE_ to
WITH_ and dropped stdarg.h detection were a bit too aggressive.
Because of reasons described in 9ea3424a17 we need to define
HAVE_STDARG_H before including readline otherwise macos build
fails. Honestly, I still don't fully understand the problem so I
am not going to bother you with "explanation".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This allows us to drop include of readline header files from
virsh.c and virt-admin.c because they needed it only because of
the add_history() function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If someone runs `meson setup --buildtype plain` meson ignores
warning_level=2 that is in our meson.build file. The implication is
that Meson will not automatically add -Wall which enables -Wformat.
This breaks building libvirt from git with the buildtype set to plain.
There is an issue reported [1] to not ignore warning_level silently
and the change to ignore it was done by upstream commit [2].
This change makes Meson print warnings about using warning_level which
as described above doesn't work for all build types.
[1] <https://github.com/mesonbuild/meson/issues/7399>
[2] <8ee1c9a07a>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The systemd .socket unit files we ship for libvirt daemons use
SocketMode=0666 on the assumption that libvirt is built with
polkit which provides access control.
Some people, however, may have explicitly turned off polkit at
build time and not realize that leaves them insecure unless
they also change the SocketMode. This addresses that problem
by making the SocketMode default to 0600 when polkit is
disabled at compile time.
Note we cannot automatically fix the case where the user
compiles polkit, but then overrides the libvirtd.conf defaults
to disable polkit. This is what lead to CVE-2020-15708 in
Ubuntu 20.10. We can at least improve the inline comments
in the config file to give a clearer warning though, which
may have helped avoid the mistaken config.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Rather than use the names "fial" and "kep", use "fail" and "keep". In
the DO_TEST() macro, to prevent the preprocessor replacing the struct
member names during assignment, use the names "fail_" and "keep_"
instead.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Since QEMU 1.5.3, the ib700 watchdog device has no options for address,
and not address in device tree:
$ /usr/libexec/qemu-kvm -version
QEMU emulator version 1.5.3 (qemu-kvm-1.5.3-175.el7), Copyright (c) 2003-2008 Fabrice Bellard
$ /usr/libexec/qemu-kvm -device ib700,\?
$ virsh qemu-monitor-command seabios --hmp info qtree|grep ib700 -A 2
dev: ib700, id "watchdog0"
dev: isa-serial, id "serial0"
index = 0
So only allow it to use none address.
Fixes: 8a54cc1d08
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1509908
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuAgentFSInfoToPublic() currently only sets the devAlias for PCI devices.
However, the QEMU guest agent could also provide the device name in the
"dev" field of the response for other devices instead (well, at least after
fixing another problem in the current QEMU guest agent...). So if creating
the devAlias from the PCI information failed, let's fall back to the name
provided by the guest agent. This helps to fix the empty "Target" fields
that occur when running "virsh domfsinfo" on s390x where CCW devices are
used for the guest instead of PCI devices.
Also add a proper debug message here in case we completely failed to set the
device alias, since this problem here was very hard to debug: The only two
error messages that I've seen were "Unable to get filesystem information"
and "Unable to encode message payload" - which only indicates that something
went wrong in the RPC call. No debug message indicated the real problem, so
I had to learn the hard way why the RPC call failed (it apparently does not
like devAlias left to be NULL) and where the real problem comes from.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1755075
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
libvirt currently silently allows <timer name="kvmclock"/> and some
other timer tags in the guest XML definition for timers that do not
exist on non-x86 systems. We should not silently ignore these tags
since the users might not get what they expected otherwise.
Note: The error is only generated if the timer is marked with
present="yes" - otherwise we would suddenly refuse XML definitions
that worked without problems before.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1754887
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
vim seems to be able to process the file just fine without a
modeline, so it's probably fair to assume Emacs doesn't need
any extra help either.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we have moved to Meson, we are no longer required to
use a specific name for this file, and since the rest of our
documentation is in reStructuredText format and uses a matching
file extension, we can give the AUTHORS file the same treatment.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently, we are mixing: #if HAVE_BLAH with #if WITH_BLAH.
Things got way better with Pavel's work on meson, but apparently,
mixing these two lead to confusing and easy to miss bugs (see
31fb929eca for instance). While we were forced to use HAVE_
prefix with autotools, we are free to chose our own prefix with
meson and since WITH_ prefix appears to be more popular let's use
it everywhere.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In packet-libvirt.c in wireshark dissector we include rpc/types.h
but guard the include with a condition (that is supposed to be
true if we detected during configure phase that the host system
has the header file). Thing is, it looks like we were never doing
the configure check and thus the file was never included and yet,
the NSS plugin works. Drop the include then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In meson.build, we check for presence of unshare() function
explicitly (even though there is the function usability check a
few hundred lines below), but never have any code depending on
HAVE_UNSHARE. The same applies to stdarg.h and sys/sysctl.h
header files - either we simply include them or guard their
include using different conditionals.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are couple of conditional #includes at the beginning of
virfile.c and they try to be nice and document #endifs. But they
are mostly wrong because either they have the condition in the
comment inverted or the comment refers to a different condition
than they belong to. Just remove the comments as these #includes
are single line mostly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two places where we try to check whether the host
system has net/if.h before including it. But the check is missing
'_H' suffix.
Fixes: 7f3eb533f4
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Setting IFF_VNET_HDR for a tap device passes the whole packet to the
host, reducing emulation overhead and improving performance.
Libvirt bases its decision about applying IFF_VNET_HDR to the tap
interface on whether or not the model of the emulated network device
is virtio. Originally, virtio was the only model to support
IFF_VNET_HDR in QEMU; however, the e1000e & vmxnet3 adapters have also
supported it since their introductions - QEMU commit
786fd2b0f87 for vmxnet3, and QEMU commit 6f3fbe4ed0 for e1000e, so it
should be set for those models too.
Signed-off-by: Patrick Magauran <patmagauran.j@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Laine Stump <laine@redhat.com>
MacOS can not pre-load modules, so mock libraries must be built
as shared libraries (without asneeded striping, and undefined
symbols allowed).
Signed-off-by: Scott Shambarger <scott-libvirt@shambarger.net>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Assume commit 0466ff28f2 used case-insensitive replace s/OUT/EXP/
by mistake and this file is still licensed under GPLv2.0+
Undo the change.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
FIxes: 0466ff28f2
Cc: Cole Robinson <crobinso@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Pino Toscano <ptoscano@redhat.com>
Add support for the writeFiltering attribute in the domXML to native
config converter. Also include a test.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
By default Xen only allows guests to write "known safe" values into PCI
configuration space, yet many devices require writes to other areas of
the configuration space in order to operate properly. To allow writing
any values Xen supports the 'permissive' setting, see xl.cfg(5) man page.
This change models Xen's permissive setting by adding a writeFiltering
attribute on the <source> element of a PCI hostdev. When writeFiltering
is set to 'no', the Xen permissive setting will be enabled and guests
will be able to write any values into the device's configuration space.
The permissive setting remains disabled in the absense of the
writeFiltering attribute, of if it is explicitly set to 'yes'.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a configuration option for specifying location of the qemu modules
directory, defaulting to /usr/lib64/qemu. Then use this location to
check for changes in the directory, indicating that a qemu module has
changed and capabilities need to be reprobed.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Use https: links for websites that support them.
The URIs which are used as namespace identifiers
are left alone.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
The list archives, people.redhat.com and bugzilla all support
https.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Also, remove the url from the translatable string,
reducing it to the generic message already used
by virXMLNamespaceRegister.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
It seems wireshark has migrated to gitlab in the meantime.
Point there instead of to the dead svn repo.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
The docs have moved to gnutls.org.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
The include was introduced by:
commit 3d6fe99c5c
Add vcpu functions to libxl driver
which used ceil() and floor(), but these were later
removed by:
commit 3eb869a04b
libxl: avoid compiler warning
which did not remove the include.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
