Allow the possibility of opening a connection to only the storage
driver, by defining storage:///system and storage:///session URIs
and registering a fake hypervisor driver that supports them.
The hypervisor drivers can now directly open a storage driver
connection at time of need, instead of having to pass around a
virConnectPtr through many functions. This will facilitate the later
change to support separate daemons for each driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
By convention the last thing in the driver.c files should be the driver
callback table and function to register it.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
For a disk backend, the deleteVol code will clear all the
volumes in the pool and perform a pool refresh, thus the
storageVolDeleteInternal should not use access @voldef
after deleteVol succeeds.
Now that we have a private storage pool list, we can take the next
step and convert to using objects. In this case, we're going to use
RWLockable objects (just like every other driver) with two hash
tables for lookup by UUID or Name.
Along the way the ForEach and Search API's will be adjusted to use
the related Hash API's and the various FindBy functions altered and
augmented to allow for HashLookup w/ and w/o the pool lock already
taken.
After virStoragePoolObjRemove we will need to virObjectUnref(obj)
after to indicate the caller is "done" with it's reference. The
Unlock occurs during the Remove.
The NumOf, GetNames, and Export functions all have their own callback
functions to return the required data and the FindDuplicate code
can use the HashSearch function callbacks.
Commit id '5ab746b8' introduced the function as perhaps a copy
of storageVolLookupByPath; however, it did not use the @cleanpath
variable even though it used the virFileSanitizePath. So in essance
the only "check" being done for failure is whether it was possible
to strdup the path.
Looking at the virStoragePoolDefParseXML one will note that the
target.path is stored using the result of virFileSanitizePath.
Therefore, this function should sanitize and use the input @path
for the argument to storagePoolLookupByTargetPathCallback which
is comparing against stored target.path values.
Additionally, if there was an error we should use the proper error
of VIR_ERR_NO_STORAGE_POOL (instead of VIR_ERR_NO_STORAGE_VOL).
Commit id '5d5c732d7' had an incorrect assignment and was found
by travis build:
storage/storage_driver.c:1668:14: error: equality comparison with extraneous
parentheses [-Werror,-Wparentheses-equality]
if ((obj == virStoragePoolObjListSearch(&driver->pools,
~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Create an API to search through the storage pool objects looking for
a specific truism from a callback API in order to return the specific
storage pool object that is desired.
Create an API to walk the pools->objs[] list in order to perform a
callback function for each element of the objs array that doesn't care
about whether the action succeeds or fails as the desire is to run the
code over every element in the array rather than fail as soon as or if
one fails.
For now it'll just call the virStoragePoolObjUnlock, but a future
adjustment will do something different. Since the new API will check
for a NULL object before the Unlock call, callers no longer need to
check for NULL before calling.
The virStoragePoolObjUnlock is now private/static to virstorageobj.c
with a short term forward reference.
Resolve a storage driver crash as a result of a long running
storageVolCreateXML when the virStorageVolPoolRefreshThread is
run as a result of when a storageVolUpload completed and ran the
virStoragePoolObjClearVols without checking if the creation
code was currently processing a buildVol after incrementing
the driver->asyncjob count.
The refreshThread will now check the pool asyncjob count before
attempting to pursue the pool refresh. Adjust the documentation
to describe the condition.
Crash from valgrind is as follows (with a bit of editing):
==21309== Invalid read of size 8
==21309== at 0x153E47AF: storageBackendUpdateVolTargetInfo
==21309== by 0x153E4C30: virStorageBackendUpdateVolInfo
==21309== by 0x153E52DE: virStorageBackendVolRefreshLocal
==21309== by 0x153DE29E: storageVolCreateXML
==21309== by 0x562035B: virStorageVolCreateXML
==21309== by 0x147366: remoteDispatchStorageVolCreateXML
...
==21309== Address 0x2590a720 is 64 bytes inside a block of size 336 free'd
==21309== at 0x4C2F2BB: free
==21309== by 0x54CB9FA: virFree
==21309== by 0x55BC800: virStorageVolDefFree
==21309== by 0x55BF1D8: virStoragePoolObjClearVols
==21309== by 0x153D967E: virStorageVolPoolRefreshThread
...
==21309== Block was alloc'd at
==21309== at 0x4C300A5: calloc
==21309== by 0x54CB483: virAlloc
==21309== by 0x55BDC1F: virStorageVolDefParseXML
==21309== by 0x55BDC1F: virStorageVolDefParseNode
==21309== by 0x55BE5A4: virStorageVolDefParse
==21309== by 0x153DDFF1: storageVolCreateXML
==21309== by 0x562035B: virStorageVolCreateXML
==21309== by 0x147366: remoteDispatchStorageVolCreateXML
...
In preparation for privatizing the object, use the accessor to fetch
the obj->def instead of the direct reference.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This commit adds new events for two methods and operations: *PoolBuild() and
*PoolDelete(). Using the event-test and the commands set below we have the
following outputs:
$ sudo ./event-test
Registering event callbacks
myStoragePoolEventCallback EVENT: Storage pool test Defined 0
myStoragePoolEventCallback EVENT: Storage pool test Created 0
myStoragePoolEventCallback EVENT: Storage pool test Started 0
myStoragePoolEventCallback EVENT: Storage pool test Stopped 0
myStoragePoolEventCallback EVENT: Storage pool test Deleted 0
myStoragePoolEventCallback EVENT: Storage pool test Undefined 0
Another terminal:
$ sudo virsh pool-define test.xml
Pool test defined from test.xml
$ sudo virsh pool-build test
Pool test built
$ sudo virsh pool-start test
Pool test started
$ sudo virsh pool-destroy test
Pool test destroyed
$ sudo virsh pool-delete test
Pool test deleted
$ sudo virsh pool-undefine test
Pool test has been undefined
This commits can be a solution for RHBZ #1475227.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1475227
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Create/use virStoragePoolObjAddVol in order to add volumes onto list.
Create/use virStoragePoolObjRemoveVol in order to remove volumes from list.
Create/use virStoragePoolObjGetVolumesCount to get count of volumes on list.
For the storage driver, the logic alters when the volumes.obj list grows
to after we've fetched the volobj. This is an optimization of sorts, but
also doesn't "needlessly" grow the volumes.objs list and then just decr
the count if the virGetStorageVol fails.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1437797
Rather than using refreshVol which essentially only updates the
allocation, capacity, and permissions for the volume, but not
the format which does get updated in a pool refresh - let's use
the same helper that pool refresh uses in order to update the
volume target.
Currently, @port is type of string. Well, that's overkill and
waste of memory. Port is always an integer. Use it as such.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Alter the virStoragePoolObjNumOfVolumes, virStoragePoolObjVolumeGetNames,
and virStoragePoolObjVolumeListExport APIs to take a virStoragePoolObjPtr
instead of the &obj->volumes and obj->def.
Signed-off-by: John Ferlan <jferlan@redhat.com>
A virStoragePoolObjPtr will be an 'obj'.
A virStoragePoolPtr will be a 'pool'.
A virStorageVolPtr will be a 'vol'.
A virStorageVolDefPtr will be a 'voldef'.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If a remote call fails during event registration (more than likely from
a network failure or remote libvirtd restart timed just right), then when
calling the virObjectEventStateDeregisterID we don't want to call the
registered @freecb function because that breaks our contract that we
would only call it after succesfully returning. If the @freecb routine
were called, it could result in a double free from properly coded
applications that free their opaque data on failure to register, as seen
in the following details:
Program terminated with signal 6, Aborted.
#0 0x00007fc45cba15d7 in raise
#1 0x00007fc45cba2cc8 in abort
#2 0x00007fc45cbe12f7 in __libc_message
#3 0x00007fc45cbe86d3 in _int_free
#4 0x00007fc45d8d292c in PyDict_Fini
#5 0x00007fc45d94f46a in Py_Finalize
#6 0x00007fc45d960735 in Py_Main
#7 0x00007fc45cb8daf5 in __libc_start_main
#8 0x0000000000400721 in _start
The double dereference of 'pyobj_cbData' is triggered in the following way:
(1) libvirt_virConnectDomainEventRegisterAny is invoked.
(2) the event is successfully added to the event callback list
(virDomainEventStateRegisterClient in
remoteConnectDomainEventRegisterAny returns 1 which means ok).
(3) when function remoteConnectDomainEventRegisterAny is hit,
network connection disconnected coincidently (or libvirtd is
restarted) in the context of function 'call' then the connection
is lost and the function 'call' failed, the branch
virObjectEventStateDeregisterID is therefore taken.
(4) 'pyobj_conn' is dereferenced the 1st time in
libvirt_virConnectDomainEventFreeFunc.
(5) 'pyobj_cbData' (refered to pyobj_conn) is dereferenced the
2nd time in libvirt_virConnectDomainEventRegisterAny.
(6) the double free error is triggered.
Resolve this by adding a @doFreeCb boolean in order to avoid calling the
freeCb in virObjectEventStateDeregisterID for any remote call failure in
a remoteConnect*EventRegister* API. For remoteConnect*EventDeregister* calls,
the passed value would be true indicating they should run the freecb if it
exists; whereas, it's false for the remote call failure path.
Patch based on the investigation and initial patch posted by
fangying <fangying1@huawei.com>.
It is necessary for some parts of the code to refresh just data
based on the based on the backing store string. Add a convenience
function that will retrieve this data.
Use ATTRIBUTE_FALLTHROUGH, introduced by commit
5d84f5961b, instead of comments to
indicate that the fall through is an intentional behavior.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
These flags to APIs will tell if caller wants to use sparse
stream for storage transfer. At the same time, it's safe to
enable them in storage driver frontend and rely on our backends
checking the flags. This way we can enable specific flags only on
some specific backends, e.g. enable
VIR_STORAGE_VOL_DOWNLOAD_SPARSE_STREAM for filesystem backend but
not iSCSI backend.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Mostly code motion to move storageConnectList[Defined]StoragePools
and similar test driver code into virstorageobj.c and rename to
virStoragePoolObjGetNames.
Also includes a couple of variable name adjustments to keep code consistent
with other drivers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unify the NumOf[Defined]StoragePools API into virstorageobj.c from
storage_driver and test_driver. The only real difference between the
two is the test driver doesn't call using the aclfilter API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Mostly code motion to move storagePoolListVolumes code into virstorageobj.c
and rename to virStoragePoolObjVolumeGetNames.
Also includes a couple of variable name adjustments to keep code consistent
with other drivers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unify the NumOfVolumes API into virstorageobj.c from storage_driver and
test_driver. The only real difference between the two is the test driver
doesn't call using the aclfilter API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If a transient storage pool is deemed inactive after libvirtd restart it
would not be deleted from the list. Reuse virStoragePoolUpdateInactive
along with a refactor necessary to properly update the state.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1242801
After a pool is made inactive the definition objects need to be updated
(if a new definition is prepared) and transient pools need to be
completely removed. Split out the code doing these steps into a separate
function for later reuse.
There is no reason for it not to be in the utils, all global symbols
under that file already have prefix vir* and there is no reason for it
to be part of DRIVER_SOURCES because that is just a leftover from
older days (pre-driver modules era, I believe).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Use "virStoragePoolObj" as a prefix for any external API in virstorageobj.
Also a couple of functions were local to virstorageobj.c, so remove their
external defs iin virstorageobj.h.
NB: The virStorageVolDef* API's won't change.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add a new storage driver registration function that will force the
backend code to fail if any of the storage backend modules can't be
loaded. This will make sure that they work and are present.
Add APIs that allow to dynamically register driver backends so that the
list of available drivers does not need to be known during compile time.
This will allow us to modularize the storage driver on runtime.
Added general definitions for vstorage pool backend including
the build options to add --with-storage-vstorage checking.
In order to use vstorage as a backend for a storage pool
vstorage tools (vstorage and vstorage-mount) need to be installed.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
