'numad' may return a nodeset which contains NUMA nodes without memory
for certain configurations. Since cgroups code will not be happy using
nodes without memory we need to store only numa nodes with memory in
autoNodeset.
On the other hand autoCpuset should contain cpus also for nodes which
do not have any memory.
A new function virNetDevOpenvswitchUpdateVlan has been created to instruct
OVS of the changes. qemuDomainChangeNet has been modified to handle the
update of the VLAN configuration for a running guest and rely on
virNetDevOpenvswitchUpdateVlan to do the actual update if needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Preparation for switching to virFileCache where there are two callbacks,
one to get a new data and second one to load a cached data.
This also removes virQEMUCapsReset which is no longer required.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
It's not required and following patches will change the code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Cleanups the code a little bit and reduces amount of arguments passed
throughout the functions.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
While searching for an element using a function it may be
desirable to know the element key for future operation.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Actually we use virConnectNodeDeviceEventGenericCallback.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
At present shared disks can be migrated with either readonly or cache=none. But
cache=directsync should be safe for migration, because both cache=directsync and cache=none
don't use the host page cache, and cache=direct write through qemu block layer cache.
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Reviewed-by: Wang Yechao <wang.yechao255@zte.com.cn>
Use virStorageSource accessors to check the file and call
virStorageFileAccess before even attempting to stat the target. This
will be helpful once we try to add network destinations for block copy,
since there will be no need to stat them.
When copying to a block device, the block device will already exist. To
allow users using a block device without any preparation, they need to
use the block copy without VIR_DOMAIN_BLOCK_COPY_REUSE_EXT.
This means that if the target is an existing block device we don't need
to prepare it, but we can't reject it as being existing.
To avoid breaking this feature, explicitly assume that existing block
devices will be reused even without that flag explicitly specified,
while skipping attempts to create it.
qemuMonitorDriveMirror still needs to honor the flag as specified by the
user, since qemu overwrites the metadata otherwise.
The example is rather long and upcomming patch will check whether the
string can be formatted back. As the formatted string lacks spaces and
adding the 'expect' string with spaces would be rather long, just drop
spaces from this test case.
There are other test cases which do contain spaces.
Introduced by commit 0832c58, with the intention to link with
the stack protector library.
Another instance introduced by commit 4cbc15d which separated
commandhelper_LDADD from LDADDS.
Not needed because per commit 71b54636, automake should pass
all the CFLAGS to the linker.
The refactor to split up storage driver into modules broke the apparmor
helper program, since that did not initialize the storage driver
properly and thus detection of the backing chain could not work.
Register the storage driver backends explicitly. Unfortunately it's now
necessary to link with the full storage driver to satisfy dependencies
of the loadable modules.
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
The purpose of this function is to tell if the current position
in given FD is in data section or a hole and how much bytes there
is remaining until the end of the section. This is achieved by
couple of lseeks(). The most important part is that we reposition
the FD back, so that the position is unchanged from the caller
POV. And until now the final lseek() back to the original
position was done with no check for errors. And I was convinced
that that's okay since nothing can go wrong. However, review
feedback from a related series persuaded me, that it's better to
be safe than sorry. Therefore, lets check if the final lseek()
succeeded and if it doesn't report an error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
/domain/devices/disk/driver/@name is not a required or mandatory
attribute according to formatdomain, and indeed it was agreed on
IRC that the attribute is "optional for input, recommended (but
not required) for output". Currently the schema requires the
attribute, causing virt-xml-validate to fail on disk config where
the driver name is not explicitly specified. E.g.
# cat test.xml | grep -A 5 cdrom
<disk type='file' device='cdrom'>
<driver type='raw'/>
<target dev='hdb' bus='ide'/>
<readonly/>
<address type='drive' controller='0' bus='0' target='0' unit='1'/>
</disk>
# virt-xml-validate test.xml
Relax-NG validity error : Extra element devices in interleave
test.xml:21: element devices: Relax-NG validity error : Element domain failed to validate content
test.xml fails to validate
Relaxing the name attribute to be optional fixes the validation
# virt-xml-validate test.xml
test.xml validates
In Wireshark commit of 7cd6906056922e4b8 (contained in v2.4.0)
the tvb_new_subset() function was renamed to
tvb_new_subset_length_caplen(). However, we can take the extra
step and rename to tvb_new_subset_remaining() directly (see
Wireshark commit 0ecfc7280cf3d7). The reasoning is that there is
no other protocol in the packet than libvirt. Therefore, from the
point that libvirt dissector takes over till the end of the
packet it's all libvirt packet.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
All the pieces are now in place, so we can finally start
using isolation groups to achieve our initial goal, which is
separating hostdevs from emulated PCI devices while keeping
hostdevs that belong to the same host IOMMU group together.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1280542
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
These rules will make it possible for libvirt to
automatically assign PCI addresses in a way that
respects any isolation constraints devices might
have.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Isolation groups will eventually allow us to make sure certain
devices, eg. PCI hostdevs, are assigned to guest PCI buses in
a way that guarantees improved isolation, error detection and
recovery for machine types and hypervisors that support it,
eg. pSeries guest on QEMU.
This patch merely defines storage for the new information
we're going to need later on and makes sure it is passed from
the hypervisor driver (QEMU / bhyve) down to the generic PCI
address allocation code.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Now that we have a bit more control, let's convert our object into
a lockable object and let that magic handle the create and lock/unlock.
This also involves creating a virNodeDeviceEndAPI in order to handle
the object cleanup for API's that use the Add or Find API's in order
to get a locked/reffed object. The EndAPI will unlock and unref the
object returning NULL to indicate to the caller to not use the obj.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the structures to withing virnodedeviceobj.c
Move the typedefs from node_device_conf to virnodedeviceobj.h
Signed-off-by: John Ferlan <jferlan@redhat.com>
In an overall effort to privatize access to virNodeDeviceObj and
virNodeDeviceObjList into the virnodedeviceobj module, move the
object list parsing from node_device_driver and replace with a
call to a virnodedeviceobj helper. This follows other similar
APIs/helpers which peruse the object list looking for some specific
data in order to get/return an @device (virNodeDevice) object to
the caller.
Signed-off-by: John Ferlan <jferlan@redhat.com>
We're about to move the call to nodeDeviceSysfsGetSCSIHostCaps from
node_device_driver into virnodedeviceobj, so move the guts of the code
from the driver specific node_device_linux_sysfs into its own API
since virnodedeviceobj cannot callback into the driver.
Nothing in the code deals with sysfs anyway, as that's hidden by the
various virSCSIHost* and virVHBA* utility function calls.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Create local @obj and @def for the API's rather than referencing the
devs->objs[i][->def->]. It'll make future patches easier to read.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Ensure that any function that walks the node device object list is prefixed
by virNodeDeviceObjList.
Also, modify the @filter param name for virNodeDeviceObjListExport to
be @aclfilter.
Signed-off-by: John Ferlan <jferlan@redhat.com>
