In the case that virtlogd is used as stdio handler we pass to QEMU
only FD to a PIPE connected to virtlogd instead of the file itself.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1430988
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Improve the code to decide whether to use virtlogd or not by checking
the same variable that is updated in qemuProcessPrepareDomain().
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
In QEMU driver we can use virtlogd as stdio handler for source backend
of char devices if current QEMU is new enough and it's enabled in
qemu.conf. We should store this information while starting a guest
because the config option may change while the guest is running.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1431112
Imagine a FS mounted on /dev/blah/blah2. Our process of creating
suffix for temporary location where all the mounted filesystems
are moved is very simplistic. We want:
/var/run/libvirt/qemu/$domName.$suffix\
were $suffix is just the mount point path stripped of the "/dev/"
prefix. For instance:
/var/run/libvirt/qemu/fedora.mqueue for /dev/mqueue
/var/run/libvirt/qemu/fedora.pts for /dev/pts
and so on. Now if we plug /dev/blah/blah2 into the example we see
some misbehaviour:
/var/run/libvirt/qemu/fedora.blah/blah2
Well, misbehaviour if /dev/blah/blah2 is a file, because in that
case we call virFileTouch() instead of virFileMakePath().
The solution is to replace all the slashes in the suffix with say
dots. That way we don't have to care about nested directories.
IOW, the result we want for given example is:
/var/run/libvirt/qemu/fedora.blah.blah2
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1431112
There can be nested mount points. For instance /dev/shm/blah can
be a mount point and /dev/shm too. It doesn't make much sense to
return the former path because callers preserve the latter (and
with that the former too). Therefore prune nested mount points.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1431112
After 290a00e41d we know how to deal with file mount points.
However, when cleaning up the temporary location for preserved
mount points we are still calling rmdir(). This won't fly for
files. We need to call unlink(). Now, since we don't really care
if the cleanup succeeded or not (it's the best effort anyway), we
can call both rmdir() and unlink() without need for
differentiation between files and directories.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
On some platforms the number of bits in the cbm_mask might not be
divisible by 4 (and not even by 2), so we need to properly count the
bits. Similar file, min_cbm_bits, is properly parsed and used, but if
the number is greater than one, we lose the information about
granularity when reporting the data in capabilities. For that matter
always report granularity, but if it is not the same as the minimum,
add that information in there as well.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When setting up VncTLS according to the official Libvirt documentation,
only one certificate for libvirt/libvirt-vnc is used. The document
indicates to use the following directories :
/etc/pki/CA
/etc/pki/libvirt
/etc/pki/libvirt/private
in order to manage the certificates used by libvirt-vnc.
Bug-Ubuntu: https://bugs.launchpad.net/bugs/901272
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
On Debian/Ubuntu the libxl-save-helper (used when saving/restoring
a domain through libxl) is located under /usr/lib/xen-<version>/bin.
Bug-Ubuntu: https://bugs.launchpad.net/bugs/1334195
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Updates profile to allow running on ppc64el.
Bug-Ubuntu: https://bugs.launchpad.net/bugs/1374554
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
This replaces individual tests for firmware locations by
a generic function which will simplify having additional
locations in the future.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The split firmware and variables files introduced by
https://bugs.debian.org/764918 are in a different directory for
some reason. Let the virtual machine read both.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Change the settings from qemuDomainUpdateDeviceLive() as otherwise the
call would succeed even though nothing has changed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1414627
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
GCC 7.1 introduces a new -Wformat-truncation warning
flag that reports if it thinks the maximum possible
size of the formatted output will exceed the provided
fixed buffer. This is enabled automatically by the
-Wformat warning flag. There are quite a few places
hit by this in libvirt which need rewriting. This is
non-trivial work in some places, so temporarily
disable the new warning until those fixes can be
implemented.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Depending on the platform/architecture, a number of conditionals
in libvirt code expand the same on both branches. This is expected
behaviour and harmless, so disable the warning to avoid creating
unexpected build failures
Two examples, mingw32:
../../src/util/vircommand.c: In function 'virCommandWait':
../../src/util/vircommand.c:2562:51: error: this condition has identical branches [-Werror=duplicated-branches]
*exitstatus = cmd->rawStatus ? status : WEXITSTATUS(status);
^
and gcc7.1
In file included from util/virobject.c:28:0:
util/virobject.c: In function 'virClassNew':
util/viratomic.h:176:46: error: this condition has identical branches [-Werror=duplicated-branches]
(void)(0 ? *(atomic) ^ *(atomic) : 0); \
^
util/virobject.c:144:20: note: in expansion of macro 'virAtomicIntInc'
klass->magic = virAtomicIntInc(&magicCounter);
^~~~~~~~~~~~~~~
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Most places which want to check ABI stability for an active domain need
to call this API rather than the original
qemuDomainDefCheckABIStability. The only exception is in snapshots where
we need to decide what to do depending on the saved image data.
https://bugzilla.redhat.com/show_bug.cgi?id=1460952
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When making ABI stability checks for an active domain, we need to make
sure we use the same migratable definition which virDomainGetXMLDesc
with the MIGRATABLE flag provides, otherwise the ABI check will fail.
This is implemented in the new qemuDomainCheckABIStability which takes a
domain object and generates the right migratable definition from it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This patch separates the actual ABI checks from getting migratable defs
in qemuDomainDefCheckABIStability so that we can create another wrapper
which will use different methods to get the migratable defs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The main goal of this function is to enable reusing the parsing code
from qemuDomainDefCopy.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1214369
My fix 671d18594f was incomplete. If domain doesn't have
hugepages enabled, because of missing condition we would still be
putting hugepages path onto qemu cmd line. Clean up the
conditions so that it's more visible next time.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
With glibc >= 2.25.90 writev() is only available if you explicitly
include sys/uio.h. This matches the documented requirements, but
older glibc and other *NIX pulled in writev indirectly so the bug
wasn't noticed previously.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
With the current logic, we only free @tlsalias as part of the error
label and would have to free it explicitly earlier in the code. Convert
the error label to cleanup, so that we have only one sink, where we
handle all frees. Since JSON object append operation consumes pointers,
make sure @backend is cleared before we hit the cleanup label.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1214369
Consider the following XML:
<memoryBacking>
<hugepages>
<page size='2048' unit='KiB' nodeset='1'/>
</hugepages>
<source type='file'/>
<access mode='shared'/>
</memoryBacking>
<numa>
<cell id='0' cpus='0-3' memory='512000' unit='KiB'/>
<cell id='1' cpus='4-7' memory='512000' unit='KiB'/>
</numa>
The following cmd line is generated:
-object
memory-backend-file,id=ram-node0,mem-path=/var/lib/libvirt/qemu/ram,
share=yes,size=524288000 -numa node,nodeid=0,cpus=0-3,memdev=ram-node0
-object
memory-backend-file,id=ram-node1,mem-path=/var/lib/libvirt/qemu/ram,
share=yes,size=524288000 -numa node,nodeid=1,cpus=4-7,memdev=ram-node1
This is obviously wrong as for node 1 hugepages should have been
used. The hugepages configuration is more specific than <source
type='file'/>.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have couple of hugepage enabled domains for qemuxml2argvtest.
Unfortunately, often when adding a test case there I forget to
add it to xml2xml test too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1455819
It may happen that a domain is started without any huge pages.
However, user might try to attach a DIMM module later. DIMM
backed by huge pages (why would somebody want to mix regular and
huge pages is beyond me). Therefore we have to create the dir if
we haven't done so far.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1455819
Currently, the per-domain path for huge pages mmap() for qemu is
created iff domain has memoryBacking and hugepages in it
configured. However, this alone is not enough because there can
be a DIMM module with hugepages configured too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Right now, there is a lot of exit points from the function.
Depending on their position they need to copy the same free
calls. This goes against our style where we usually have just one
exit point from the function which also does the necessary free.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit v3.4.0-44-gac793bd71 fixed a memory leak, but failed to return
the special -3 value. Thus an attempt to start a domain with corrupted
managed save file would removed the corrupted file and report
"An error occurred, but the cause is unknown" instead of starting the
domain from scratch.
https://bugzilla.redhat.com/show_bug.cgi?id=1460962
@rundir, allocated by virGetUserRuntimeDirectory, is leaked in case
virFileMakePath fails.
Signed-off-by: Xi Xu <xu.xi8@zte.com.cn>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Use ATTRIBUTE_FALLTHROUGH, introduced by commit
5d84f5961b, instead of comments to
indicate that the fall through is an intentional behavior.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Add a comment for mon->watch to make clear what's the purpose of this
value.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
The virDomainUSBAddressEnsure returns 0 or -1, so commit id 'de325472'
checking for 1 like qemuDomainAttachChrDeviceAssignAddr was wrong.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Commit 824272cb28 attempted to fix escaping of characters in unix
socket path but it was wrong. We need to escape only ',', there is
no escape character for '='.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
When building with clang 4.0.0, virsh build fails like this:
gmake[3]: Entering directory '/usr/home/novel/code/libvirt/tools'
CC virsh-virsh.o
In file included from virsh.c:45:
In file included from /usr/local/include/readline/readline.h:31:
/usr/local/include/readline/rltypedefs.h:35:22: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
typedef int Function () __attribute__ ((deprecated));
^
void
/usr/local/include/readline/rltypedefs.h:36:24: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
typedef void VFunction () __attribute__ ((deprecated));
^
void
/usr/local/include/readline/rltypedefs.h:37:26: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
typedef char *CPFunction () __attribute__ ((deprecated));
^
void
/usr/local/include/readline/rltypedefs.h:38:28: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
typedef char **CPPFunction () __attribute__ ((deprecated));
^
void
In file included from virsh.c:45:
/usr/local/include/readline/readline.h:385:23: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
extern int rl_message ();
^
void
5 errors generated.
gmake[3]: *** [Makefile:2823: virsh-virsh.o] Error 1
Fix that by adding -D_FUNCTION_DEF to READLINE_CFLAGS to fix *Function
related warnings and add a check for stdarg.h so we have HAVE_STDARG_H
defined that's needed by the readline headers to use proper rl_message
declaration.
Bug report on the readline mailing list:
http://lists.gnu.org/archive/html/bug-readline/2017-05/msg00004.html
https://bugzilla.redhat.com/show_bug.cgi?id=1447618
Currently, any attempt to change MTU on an interface that is
plugged to a running domain is silently ignored. We should either
do what's asked or error out. Well, we can update the host side
of the interface, but we cannot change 'host_mtu' attribute for
the virtio-net device. Therefore we have to error out.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
https://bugzilla.redhat.com/show_bug.cgi?id=1408701
While implementing MTU (572eda12ad and friends), I've forgotten
to actually set MTU on the host NIC in case of hotplug. We
correctly tell qemu on the monitor what the MTU should be, but we
are not actually setting it on the host NIC.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
