sdk domain handle is unique per connection so there is
no sense to query it again if we have it in vzDomObjPtr.
Side effect of prlsdkSdkDomainLookupByUUID is refreshing
domain config is of no use too as PrlVm_BeginEdit do it too.
vz supports only a subset of tcp and udp parameters.
1. tcp type supports only 'raw' protocol.
2. udp type supports only same parameters of 'host' and 'service'
for 'bind' and 'connect'.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
After domain is in the domains list let's keep it there. This
is approach taken by qemu driver and vz vzDomainMigrateFinish3Params too.
It quite reasonable, driver domain object is fully constructed and
can be discovered by client later.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
9c14a9ab introduced vzNewDomain function to enlist libvirt domain
object before actually creating vz sdk domain. Fix should fix
race on same vz sdk domain added event where libvirt domain object is
enlisted too. But later eb5e9c1e added locked checks for
adding livirtd domain object to list on vz sdk domain added event.
Thus now approach of 9c14a9ab is unnecessary complicated.
See we have otherwise unuseful prlsdkGetDomainIds function only
to create minimal domain definition to create libvirt domain object.
Also vzNewDomain is difficult to use as it creates partially
constructed domain object.
Let's move back to original approach where prlsdkLoadDomain do
all the necessary job. Another benefit is that we can now
take driver lock for bare minimum and in single place. Reducing
locking time have small disadvatage of double parsing on race
conditions which is typical if domain is added thru vz driver.
Well we have this double parse inevitably with current vz sdk api
on any domain updates so i would not take it here seriously.
Performance events subscribtion is done before locked check and
therefore could be done twice on races but this is not the problem.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Vz containers are able to use ploop volumes from storage pools
to work upon.
To use filesystem type volume, pool name and volume name should be
specifaed in <source> :
<filesystem type='volume' accessmode='passthrough'>
<driver type='ploop' format='ploop'/>
<source pool='guest_images' volume='TEST_POOL_CT'/>
<target dir='/'/>
</filesystem>
The information about pool and volume is stored in ct dom configuration:
<StorageURL>libvirt://localhost/pool_name/vol_name</StorageURL>
and can be easily obtained via PrlVmDevHd_GetStorageURL sdk call.
The only shorcoming: if storage pool is moved somewhere the ct
should be redefined in order to refresh the information aboot path
to root.hdd
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
We do not need to check domainf fs type there,
because it is done in prlsdkCheckUnsupportedParams.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Adding domain to domain list on preparation step is not correct.
First domain is not fully constructed - domain definition is
missing. Second we can't use VIR_MIGRATE_PARAM_DEST_XML parameter
to parse definition as vz sdk can patch it by itself. Let's add/remove
domain on finish step. This is for synchronization purpose only so domain
is present/absent on destination after migration completion. Actually
domain object will probably be created right after actual vz sdk
migration start by vz sdk domain defined event.
We can not and should not sync domain cache on error path in finish step
of migration. We can not as we really don't know what is the reason of
cancelling and we should not as user should not make assumptions on
state on error path. What we should do is cleaning up temporary migration
state that is induced on prepare step but we don't have one. Thus
cancellation should be noop.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
libvirt domain defined event is issued only on correspondent vz sdk
event. But in case event delivered before domain is added to
domain list we can mistakenly skip this event if prlsdkNewDomainByHandle
return NULL in case of domain is discovered in the list under
the driver lock. Let's return domain object in this case.
Now prlsdkNewDomainByHandle returns NULL only in case of
error which is more convinient.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The first version of migration cookie was rather dumb resulting
in passing empty or unused fields here and there. Add flags to
specify what to bake to and eat from cookie so we deal only
with meaningful data. However for backwards compatibility
we still need to pass at least some faked fields sometimes.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Allow to store driver specific data on a per-vcpu basis.
Move of the virDomainDef*Vcpus* functions was necessary as
virDomainXMLOptionPtr was declared below this block and I didn't want to
split the function headers.
We need this because apply graphics functions is used on
update too. Also in case of NULL address resolve it to default
instead of error.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Move graphic device config to post parse. This way we
detect error on early stage and leverage checking on detach too.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
First we need to always set value to vz sdk parameter so
we can leverage setting code for device updates. This patch
resolves tristate default to off implicitly. This is easier
then extract default value from vz sdk itself. First current
default is off too, second this approach is already taken
for 'net->linkstate'.
Second dump this option in domain xml.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Current code that pass gateways to vz sdk is not suitable for
updates. If update has no gateways while we had them before
we need to pass "" for vz sdk gateways to reset old value.
The code definitely deserves its own function.
Drop checks that skip setting gateways if network address
is not set. Such a configuration is possible in vz sdk.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
This is as easy as moving disks checks from domain post
parse callback to device post parse callback.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Attach/detach functions for disk/net are quite trivial and
typically call a few functions in begin/end edit frame. Having
in mind update function too adding configuring for another
device (like graphics) will introduce 3 trivial functions more.
Let's replace current approach by attach/detach functions for
device.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Current implementation works with hard disks only. This patch
adds support for any disk device (cdroms and hdds right now).
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
This code was added as a part of huge patch that moves driver
from working with prlctl to vz sdk so there is no good explanation
why this is done this way. The problem that it is not correct.
vz sdk cache mode parameter affects all domain disks while this hunk
resets its on every disk to a new value.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
As it turned out PrlVmDev_GetStackIndex can return negative values
without reporting an error, which is incorrect but nevertheless.
After that we feed this negative index to virIndexToDiskName,
which in turn returns NULL and we set it to virDomainDiskDef.dst.
Using virDiskNameToBusDeviceIndex with a virDomainDiskDef structure
which has NULL dst field crashes.
Fix this by returning an error in prlsdkGetDiskId in such cases.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
The approach of subscribing on first stat API call and then waiting
for receiving of performance event from sdk to process the call originates
in times when every vz libvirt connections spawns its own sdk connection.
Thus without this waiting virsh stat call would return empty stats. Now
with single sdk connection this scheme is unnecessary complicated.
This patch subscribes to performance events on first domain appearence
and unsubscribe on its removing.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
In preparation for moving all the CPU related APIs out of
the nodeinfo file, give them a virHostCPU name prefix.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In preparation for moving all the memory related APIs out of
the nodeinfo file, give them a virHostMem name prefix.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Nearly all the methods in the nodeinfo file are given a
'const char *sysfs_prefix' parameter to override the
default sysfs path (/sys/devices/system). Every single
caller passes in NULL for this, except one use in the
unit tests. Furthermore this parameter is totally
Linux-specific, when the APIs are intended to be cross
platform portable.
This removes the sysfs_prefix parameter and instead gives
a new method linuxNodeInfoSetSysFSSystemPath for use by
the test suite.
For two of the methods this hardcodes use of the constant
SYSFS_SYSTEM_PATH, since the test suite does not need to
override the path for thos methods.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
VNC graphics already supports sockets but only via 'socket' attribute.
This patch coverts that attribute into listen type 'socket'.
For backward compatibility we need to handle listen type 'socket' and 'socket'
attribute properly to support old XMLs and new XMLs. If both are provided they
have to match, if only one of them is provided we need to be able to parse that
configuration too.
To not break migration back to old libvirt if the socket is provided by user we
need to generate migratable XML without the listen element and use only 'socket'
attribute.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The virConnectOpenInternal method opens the libvirt client
config file and uses it to resolve things like URI aliases.
There may be driver specific things that are useful to
store in the config file too, so rather than have them
re-parse the same file, pass the virConfPtr down to the
drivers.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Similarly to the domain definition validator add a device validator. The
change to the prototype of the domain validator is necessary as
virDomainDeviceInfoIterateInternal requires a non-const pointer.
If try to stop VM or container which is already stopped than
Virtuozzo 7 returns code PRL_ERR_INVALID_ACTION_REQUESTED.
Error code PRL_ERR_DISP_VM_IS_NOT_STARTED is used in Virtuozzo 6
vz puts uuids into curly braces. Simply introduce new contstant to reflect this
and get rid of magic +2 in code.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Peer to peer migration is implemented just as in managed case. Basically
it is copy paste from managed case but with all the branches that are not
applied to vz removed.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The newest version of migration protocol - version 3 with parameters is implemented.
Supported flags is VIR_MIGRATE_PAUSED only. Supported parameters are
VIR_MIGRATE_PARAM_URI and VIR_MIGRATE_PARAM_DEST_NAME. VIR_MIGRATE_PARAM_DEST_XML
is in VZ_MIGRATION_PARAMETERS for technical onyl reasons.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
This session uuid acts as authN token for different multihost vz operations one
of which is migration. Unfortunately we can't get it from server at any time
thus we need to save it at login.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
This solution does not keep snapshots cache because vz sdk lacks good support
for snapshot related events.
Libvirt and vz sdk has different approach to snapshot ids. vz sdk always
auto generate them while libvirt has ability to specify id by user.
Thus I have no other choice rather than simply ignore ids set by user
or generated by libvirt.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
SDK handles empty cdroms all right. We just need to
pass "" instead of NULL (not setting is good too).
However we can get problems here. Disk detaching treats source
as ids. Fortunately disk detaching is not supported for cdroms
yet and for hard disks we can not get empty source - this is prohibitited
by xml parsing code.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Current version of the function does not check format of cdroms at all.
At the same time prlsdkGetDiskInfo give hints that cdroms always
have format VIR_STORAGE_FILE_RAW. So fix vzCheckUnsupportedDisks.
About structure of checks. As we don't have means to store format
in SDK we always have only one format in every situation. So instead
of setting boolean let's get allowed format instead and finally compare
it to the requested. This structure of checks seems stable to me
because we have only one format in every situation.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
VIR_STORAGE_FILE_AUTO can not be set from xml description.
At the same time we don't set disks format to this value
as for example qemu does. Thus this we can never get this
value in format.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
If we want to delete all disks for container or vm
we should make a loop from 0 to NumberOfDisks and always
use zero index in PrlVmCfg_GetHardDisk to get disk handle.
When we delete first disk after that numbers of other disks
will be changed, start from 0 to NumberOfDisks-1.
That's why we should always use zero index.
We don't have input devices in SDK thus for define/dumpxml
operations to be consistent we need to:
1. on dumpxml: infer input devices from other parts of config.
It is already done in prlsdkLoadDomain.
2. on define: check that input devices are the same that
will be infer back on dumpxml operation.
The second part should be fixed.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
libvirt handles empty source as NULL, while vz sdk as
"" thus we need a bit of conversion.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Current implementation does not detect all incompatible configurations.
For example if we have in vzsdk bootorder "cdrom1, cdrom0" (that is
"hdb, hda" in case of ide cdroms) and cdroms do not have disk
images inserted. In this case boot order check code fails to
distiguish them at all as for both PrlVmDev_GetFriendlyName gives "".
Well the consequences are only missing warnings but as
we just have introduced all the necessary tools to face the problem -
let's fix it.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Actually using disk PrlVmDev_GetFriendlyName as id on
detaching volumes is not a problem. We can only detach
hard disks and these can not have empty friendly names.
But upcoming update device functionality for cdroms
can not use disk source as id at all as update operation
typically change this same source value. Thus we will need
to use cdrom bus and cdrom target name as cdrom id. So in attempt
to use same id scheme for all purpuses lets fix hard disk
detach function to use new id.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Our intention is to use disk bus and disk target name pair
as disk id instead of name returned by PrlVmDev_GetFriendlyName.
We already have the code that extracts this pair from vzsdk
data. Let's factor it out into a function.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Since vz driver is now lives as a part of daemon we can benefit from
this fact and allow vz clients to use shared drivers API like storage,
network, nwfilter etc.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
SDK does not allocate memory when getting strings thus we
need to call every function that returns string twice.
First to obtain string length, second to obtain string
itself. It is tedious so let's create helper functions
for cases when we know length of the result beforehand
and we are not.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
remove unnecessary vzConnectClose prototype and make
local structure vzDomainDefParserConfig be static
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
We don't need them anymore as all pointers within vzDriver structure
are not changed during the time it exists.
Where we still need to synchronize we use virObjectLock/Unlock as far
as vzDriver is lockable object.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Lock driver when a new domain is created in prlsdkNewDomainByHandle
and try to find it in the list under lock again because it can race
with vzDomainDefineXMLFlags when a domain with the same uuid is added
via vz dispatcher directly and libvirt define.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
This patch introduces a new 'vzDriver' lockable object and provides
helper functions to allocate/destroy it and we pass it to prlsdkXxx
functions instead of virConnectPtr.
Now we store domain related objects such as domain list, capabitilies
etc. within a single vz_driver vzDriver structure, which is shared by
all driver connections. It is allocated during daemon initialization or
in a lazy manner when a new connection to 'vz' driver is established.
When a connection to vz daemon drops, vzDestroyConnection is called,
which in turn relays disconnect event to all connection to 'vz' driver.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
GCC in RHEL-6 complains about listen:
../../src/conf/domain_conf.c:23718: error: declaration of 'listen' shadows a global declaration [-Wshadow]
/usr/include/sys/socket.h:204: error: shadowed declaration is here [-Wshadow]
This renames all the listen to gListen.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
No need to remember connection name and have corresponding
domain type to keep backward compatibility with former
'parallels' driver. It is enough to be able to accept 'parallels'
uri and domain types.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
