Use virXMLFormatElement to format the internals along with simplifying
cleanup code paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLFormatElement to format the internals along with simplifying
cleanup code paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLFormatElement to format the internals along with simplifying
cleanup code paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLFormatElement to format the internals along with simplifying
cleanup code paths.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refactor the function to use the XML formatting aid and use automatic
cleaning to simplify the control flow.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function does not transfer errors from 'attrBuf' and 'childBuf'
arguments into 'buf', but rather reports them right away, thus we need
to make sure that it's always checked.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuMigrationParamsApply internal API was designed to apply all
migration parameters and capabilities before we start to migrate a
domain. While migration parameters are only passed to QEMU when we
explicitly want to set a specific value, capabilities are always either
enabled or disabled.
Thus when this API is called outside migration job, e.g., via a call to
qemuDomainMigrateSetMaxSpeed with VIR_DOMAIN_MIGRATE_MAX_SPEED_POSTCOPY
flag, we would call migrate-set-capabilities and disable all
capabilities. However, changing capabilities while migration is already
running does not make sense and our code should never be trying to do
so. In fact QEMU even reports an error if migrate-set-capabilities is
called during migration and qemuDomainMigrateSetMaxSpeed would fail
with:
internal error: unable to execute QEMU command
migrate-set-capabilities: There's a migration process in progress
With this patch qemuMigrationParamsApply never tries to call
migrate-set-capabilities outside of migration job. When the capabilities
bitmap is all zeros (which is its initial value after
qemuMigrationParamsNew), we just skip the command. But when any
capability bit is set to 1 by a non-migration job, we report an error to
highlight a bug in our code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Further testing with more devices showed that we sometimes have a
different depth of pci device paths when accessing sysfs for device
attributes.
But since the access is limited to a set of filenames and read only it
is safe to use a wildcard for that.
Related apparmor denies - while we formerly had only considered:
apparmor="DENIED" operation="open"
name="/sys/devices/pci0000:00/0000:00:02.1/uevent"
requested_mask="r"
We now also know of cases like:
apparmor="DENIED" operation="open"
name="/sys/devices/pci0000:00/0000:00:03.1/0000:1c:00.0/uevent"
requested_mask="r"
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1817943
Acked-by: Jamie Strandboge <jamie@canonical.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Further testing with different devices showed that we need more rules
to drive gl backends with nvidia cards. Related denies look like:
apparmor="DENIED" operation="open"
name="/usr/share/egl/egl_external_platform.d/"
requested_mask="r"
apparmor="DENIED" operation="open"
name="/proc/modules"
requested_mask="r"
apparmor="DENIED" operation="open"
name="/proc/driver/nvidia/params"
requested_mask="r"
apparmor="DENIED" operation="mknod"
name="/dev/nvidiactl"
requested_mask="c"
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1817943
Acked-by: Jamie Strandboge <jamie@canonical.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1685151
This reverts commit e4a969092b.
Now that drivers may call virConnectOpen() on secondary drivers, it
doesn't make much sense to have autostart separated from driver
initialization callback. In fact, it creates a problem because one
driver during its initialization might try to fetch an object from
another driver but since the object is yet to be autostarted the fetch
fails. This has been observed in reality: qemu driver performs
qemuProcessReconnect() during qemu's stateInitialize phase which may
call virDomainDiskTranslateSourcePool() which connects to the storage
driver to look up the volume. But the storage driver did not autostart
its pools yet therefore volume lookup fails and the domain is killed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1685151
This reverts commit cefb97fb81.
The stateAutoStart callback will be removed in the next commit.
Therefore move autostarting of domains, networks and storage
pools back into stateInitialize callbacks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The stateAutoStart callback will go away shortly. Therefore, move
the autostart call into state initialize callback.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The order in which drivers are registered is important because
their stateInitialize and stateAutoStart callback are called in
that order. Well, stateAutoStart is going away and therefore if
there is some dependency between two drivers (e.g. when
initializing storage driver expects secret driver to be available
already), the registration of such drivers must happen in correct
order.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This fixes several CPUs which were incorrectly detected as
Skylake-Client.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This fixes several CPUs which were incorrectly detected as a different
CPU model.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The signature computation code is not too complicated and it will likely
never change so testing it is not very important. We do it mostly for a
nice side effect of easily accessible signature numbers for all CPU
data files.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The family/model numbers are nice for humans or for comparing with
/proc/cpuinfo, but sometimes there's a need to see the CPUID
representation of the signature. Let's add it into a comment for each
signature in out cpu_map XMLs as the conversion is not exactly
straightforward.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function exports the functionality of x86DataToSignatureFull and
x86MakeSignature to the test suite.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Most places in qemu_capabilities.c which call virQEMUCapsGetHostCPUData
actually need qemuMonitorCPUModelInfoPtr from QEMU caps. Let's use the
wrapper introduced in the previous commit instead.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is a simple wrapper around virQEMUCapsGetHostCPUData usable in
tests for getting qemuMonitorCPUModelInfoPtr from QEMU caps.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code for transforming qemuMonitorCPUModelInfo data from QEMU into
virCPUDefPtr consumable by virCPU* APIs was hidden inside
virQEMUCapsInitCPUModelX86. This patch moves it into a new function to
make it usable in tests.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The log message may be useful when debugging why a specific CPU model
was selected for a given set of CPUID data.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
CPU signatures in the cpu_map serve as a hint for CPUID to CPU model
matching algorithm. If the CPU signatures matches any CPU model in the
cpu_map, this model will be the preferred one.
This works out well and solved several mismatches, but in real world
CPUs which should match a single CPU model may be produced with several
different signatures. For example, low voltage Broadwell CPUs for
laptops and Broadwell CPUs for servers differ in CPU model numbers while
we should detect them all as Broadwell CPU model.
This patch adds support for storing several signatures for a single CPU
model to make this hint useful for more CPUs. Later commits will provide
additional signatures for existing CPU models, which will correct some
results in our CPU test suite.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In preparation for storing several CPU signatures in a single CPU model,
we need to turn virCPUx86Model's signature into an array of signatures.
The parser still hardcodes the number of signatures to 1, but the
following patch will drop this limit.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a helper for copying CPU signature between two CPU models.
It's not very useful until the way we store signatures is changed in the
next patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Having multiple CPU model definitions with the same name could result in
unexpected behavior.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code is separated into a new x86ModelParseFeatures function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code is separated into a new x86ModelParseVendor function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code is separated into a new x86ModelParseSignature function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code is separated into a new x86ModelParseAncestor function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The tests/cputestdata/cpu-parse.sh would produce JSON files with QEMU
replies which wouldn't pass syntax-check. Let's fix this by not emitting
an extra new line after reformatting the JSON file.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some test cases are only executed using WHEN_INACTIVE, and the
output file name should reflect this for clarity.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are a few cases where we are using either WHEN_ACTIVE
or WHEN_INACTIVE even though WHEN_BOTH would work perfectly
fine: for those, start using the simpler DO_TEST() macro.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
disk-mirror-old has different output file for the active and
inactive parts, which should be named accordingly; on the other
hand, both output files for disk-backing-chains-noindex are
identical, so it makes sense to only keep around one and remove
the (in-)active suffix.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After commits e2087c2 and ec0793de older GCC started act very smart and
complain about potentially uninitialized variable, which existed prior
to these patches + even if the affected vars were left uninitialized the
function responsible for filling them in would have failed with NULL
being returned which the caller has always handled carefully.
Although GCC complained only about a single variable, let's initialize
all of them so as to prevent any further potential breakages.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
