Save & Restore are supported without any network and hostdev config
defined. So, add a validation for it before performing save.
Signed-off-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are chances that libvirt process is killed and it resulting in
stale managed save dirs. So check for it, and cleanup it there's any.
Signed-off-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Following callbacks have been implemented
* domainRestore
* domainRestoreFlags
The path parameter to these callbacks has to be of the directory where
libvirt has performed save. Additionally, call restore in `domainCreate`
if the domain has managedsave.
Signed-off-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Create libvirt managed saveDir and pass it to CH to save the VM
Signed-off-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Implemented save callbacks. CH's vmm.snapshot API is called to save the
domain state. The path passed to these callbacks has to be of directory
as CH takes dir as input to snapshot and saves multiple files under it.
Signed-off-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Pass virCHDriverConfig to VirCHMonitorNew instead of just stateDir so
that the cfg can be used for any additional purposes.
Signed-off-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Implement folowing API calls from CH monitor
* vmm.snapshot -> to save a domain
* vmm.restore -> to restore saved domain
Signed-off-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virProcessSetScheduler() uses not just sched_setscheduler() but
also sched_get_priority_{min,max}(). Currently we assume that
the former being available implies that the latter are as well,
but that's not the case for at least GNU/Hurd.
Make sure all functions are actually available before
attempting to use them.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit c07cf0a686 replaced this check with one for the
presence of cpu_set_t.
The idea at the time was that only sched_{get,set}affinity()
were visible by default, while making cpu_set_t visible required
defining _WITH_CPU_SET_T. So libvirt would detect the function
and attempt to use it, but the code would not compile because
the necessary data type had not been made accessible.
The commit in question brought three FreeBSD commits as evidence
of this. While [1] and [2] do indeed seem to support this
explanation, [3] from just a few days later made it so that not
just cpu_set_t, but also the functions, required user action to
be visible. This arguably would have made the change unnecessary.
However, [4] from roughly a month later changed things once
again: it completely removed _WITH_CPU_SET_T, making both the
functions and the data type visible by default.
This is the status quo that seems to have persisted until
today. If one were to check any recent FreeBSD build job
performed as part of our CI pipeline, for example [5] and [6]
for FreeBSD 13 and 14 respectively, they would be able to
confirm that in both cases cpu_set_t is detected as available.
Since there is no longer a difference between the availability
of the functions and that of the data type, go back to what we
had before.
This has the interesting side-effect of fixing a bug
introduced by the commit in question.
When detection was changed from the function to the data type,
most uses of WITH_SCHED_GETAFFINITY were replaced with uses of
WITH_DECL_CPU_SET_T, but not all of them: specifically, those
that decided whether qemuProcessInitCpuAffinity() would be
actually implemented or replaced with a no-op stub were not
updated, which means that we've been running the stub version
everywhere except on FreeBSD ever since.
The code has been copied to the Cloud Hypervisor driver in
the meantime, which is similarly affected. Now that we're
building the actual implementation, we need to add virnuma.h
to the includes.
As a nice bonus this also makes things work correctly on
GNU/Hurd, where cpu_set_t is available but
sched_{get,set}affinity() are non-working stubs.
[1] https://cgit.freebsd.org/src/commit/?id=160b4b922b6021848b6b48afc894d16b879b7af2
[2] https://cgit.freebsd.org/src/commit/?id=43736b71dd051212d5c55be9fa21c45993017fbb
[3] https://cgit.freebsd.org/src/commit/?id=90fa9705d5cd29cf11c5dc7319299788dec2546a
[4] https://cgit.freebsd.org/src/commit/?id=5e04571cf3cf4024be926976a6abf19626df30be
[5] https://gitlab.com/libvirt/libvirt/-/jobs/6266401204
[6] https://gitlab.com/libvirt/libvirt/-/jobs/6266401205
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
FreeBSD 14 implements sched_{get,set}affinity() for
compatibility with Linux, but we should still use the native
syscalls instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Depending on the situation, the IDs that we pass to these
functions can be either referring to processes or threads.
Linux doesn't have separate interfaces for one or the other,
but FreeBSD does and we're explicitly telling it that the ID
refers to a process. When it refers to a thread instead, the
call will fail, and the VM will not be able to start.
Luckily, another possible choice is CPU_WHICH_TIDPID, which
makes things behave the same as Linux.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The source tag sets the rootdir property of the device, which is
the directory exposed to the guest via the MTP device. The target
tag sets the desc property. This device supports read-only mode
as well. Like virtiofs, it does not support additional access
modes.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Expose usb-mtp device as another type of <filesystem/>.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This capability reflects presence of -device usb-mtp.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
vshAdmCatchDisconnect requires non-NULL structure vshControl for
getting connection name (stored at opaque), but
virAdmConnectRegisterCloseCallback at vshAdmConnect called it
with NULL.
Signed-off-by: Adam Julis <ajulis@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Karim Taha <kariem.taha2.7@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use svirt_t instead of virtd_t, since virtd_t is not available in the
session mode and qemu with svirt_t won't be able to talk to unconfined_t
socket.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
On domain startup, qemuSetupCgroupForExtDevices checks
if a cgroup controller is present and skips the setup if not.
Add a similar check to qemuVirtioFSSetupCgroup to prevent
crashing when hotplugging a virtiofs filesystem.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
when the thread pool is dynamically expanded, threads should
not be created from the existing workers; they should be created
from the newly expanded workers
Signed-off-by: Wei Gong <gongwei833x@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Features marked with added='yes' in CPU model definitions have to be
removed before migration, otherwise older libvirt would complain about
unknown CPU features. We only do this for features that were enabled for
a given CPU model even with older libvirt, which just ignored the
features. And only for features we added ourselves when updating CPU
definition during domain startup, that is we do not remove features
which were explicitly mentioned by a user.
That said, this is not the safest thing we could do, but it's
effectively the same thing we did before the affected features were
added: we ignored them completely on both sides of migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The function returns a list of explicitly mentioned features in the CPU
definition.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The content is arch specific and checking for Icelake-Server CPU model
on non-x86 architectures does not make sense.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This is not a good idea in general, but we can (and have to) do it in
specific cases when a feature has always been part of a CPU model in
hypervisor's definition, but we ignored it and did not include the
feature in our definition.
Blindly adding the features to the CPU map and not adding them to
existing CPU models breaks migration between old and new libvirt in both
directions. New libvirt would complain the features got unexpectedly
enabled (as they were not mentioned in the incoming domain XML) even
though they were also enabled on the source and the old libvirt just
didn't know about them. On the other hand, old libvirt would refuse to
accept incoming migration of a domain started by new libvirt because the
domain XML would contain CPU features unknown to the old libvirt.
This is exactly what happened when several vmx-* features were added a
few releases back. Migration between libvirt releases before and after
the addition is now broken.
This patch adds support for added these features to existing CPU models
by marking them with added='yes'. The features will not be considered
part of the CPU model and will be described explicitly via additional
<feature/> elements, but the compatibility check will not complain if
they are enabled by the hypervisor even though they were not explicitly
mentioned in the CPU definition and incoming migration from old libvirt
will succeed.
To fix outgoing migration to old libvirt, we also need to drop all those
features from domain XML unless they were explicitly requested by the
user. This will be handled by a later patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
As of commit [1] glibc may overwrite a call to open() with call
to __open_2() (if only two arguments are provided and the code is
compiled with clang). But since we are not mocking the latter our
test suite is broken as tests try to access paths outside of our
repo.
1: https://sourceware.org/git/?p=glibc.git;a=commit;h=86889e22db329abac618c6a41f86c84657a15324
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Since virusbmock was written 10 years ago, back when we didn't
have virmock.h and its helpers, it open codes symbol resolution
(VIR_MOCK_REAL_INIT). With a bit of cleanup (e.g. renaming
realopen to real_open and so on) it can use virmock.h provided
macros.
And while at it, drop include of virusb.h - there is no
compelling reason for it include the file. The mock just
redirects paths passed to open()/opendir().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
