Memory slots are required only for DIMM-like devices, but the maximum
memory address space is relevant also for other non-DIMM memory devices
such as virtio-mem. Allow configurations where no slots are added.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Memory slots are required only for DIMM-like devices, while other
devices defined via <memory> such as virtio-mem may use the PCI bus and
thus do not require/consume a memory slot.
Fix the validation code to calculate the required count of memory
devices only for DIMMs and NVDIMMs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Specify the memory size by using '-m size=2048k' instead of just '-m 2'.
The new syntax is used when memory hotplug is enabled. To preserve
memory sizing, if memory hotplug is disabled the size is rounded down to
the nearest mebibyte.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This should not be needed, but here's what's happening:
virStrToLong_*() family of functions was switched from strtol*()
to g_ascii_strtol*() in order to handle corner cases on Windows
(most notably parsing hex numbers with base=0) - see
v9.4.0-61-g2ed41d7cd9. But what we did not realize back then, is
the fact that g_ascii_strtol*() family has their own global lock
rendering virStrToLong_*() function unsafe between fork() +
exec(). Worse, if one of the threads has to wait for the lock (or
on its corresponding condition), then errno is mangled and
g_ascii_strtol*() signals an error, even though there's no error.
Read more here:
https://gitlab.gnome.org/GNOME/glib/-/issues/3034
Nevertheless, if we make glib init the g_ascii_strtol*() global
state (by calling one function from g_ascii_strtol*() family),
then there shouldn't be any congestion on the lock and thus no
errno mangling.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The current implementation of virConnectBaselineHypervisorCPU in QEMU
driver can provide a CPU definition that will not work on all hosts in
case they have different maximum physical address size. So when we get
the info from domain capabilities, we need to choose the smallest
physical address size for the computed baseline CPU definition.
https://bugzilla.redhat.com/show_bug.cgi?id=2171860
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already report the hosts physical address size in host capabilities,
but computing a baseline CPU definition is done from domain
capabilities.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Newer GCC (13.1.1 in my case) wrongly reports "maybe uninitialized"
warning for this variable inside the next condition. Even though this
accusation is wrong (the condition is guarded by the same condition as
the for cycle initializing it), initialize it during the declaration so
compilation errors don't stop others and maybe also future proof the
code for changes.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This has two main advantages:
- it parses the number with C locale explicitly
- it behaves the same on Windows as on Linux and BSD
both of which are wanted behaviours.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
With the last user gone this function can be abolished. It is
preferable to use _ll instead since that is not a subject to 32/64 bit
scaling.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It is used to fill an unsigned long long anyway and if it is negative
than there is really an issue somewhere.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The @unionMems argument of qemuProcessSetupPid() function is not
necessary really as all callers pass 'true'. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The unit that cpuset CGroups controller works with is a
thread/process, not individual memory allocations. Therefore,
after we've set cpuset.mems for emulator (after previous commit
it's set to union of all host NUMA nodes allowed for given
domain), and as we try to set up cpuset.mems for vCPUs/IOThreads,
memory is migrated to selected NUMA node(s). We are effectively
saying: "this thread (vCPU thread) can have memory only from
these NUMA node(s)".
That's not really what we want though. The cpuset controller
doesn't differentiate memory "belonging" to the emulator thread
and vCPU thread or IOThread even.
Therefore, set union of all allowed host NUMA nodes, just like
we're doing for the emulator thread.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2138150
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In ideal world, my plan was perfect. We allow union of all host
nodes in cpuset.mems and once QEMU has allocated its memory, we
'fix up' restriction of its emulator thread by writing the
original value we wanted to set all along. But in fact, we can't
do it because that triggers memory movement. For instance,
consider the following <numatune/>:
<numatune>
<memory mode="strict" nodeset="0"/>
<memnode cellid="1" mode="strict" nodeset="1"/>
</numatune>
<numa>
<cell id="0" cpus="0-1" memory="1024000" unit="KiB" />
<cell id="1" cpus="2-3" memory="1048576" unit="KiB"/>
</numa>
This is meant to create 1:1 mapping between guest and host NUMA
nodes. So we start QEMU with cpuset.mems set to "0-1" (so that it
can allocate memory even for guest node #1 and have the memory
come fro host node #1) and then, set cpuset.mems to "0" (because
that's where we wanted emulator thread to live).
But this in turn triggers movement of all memory (even the
allocated one) to host NUMA node #0. Therefore, we have to just
keep cpuset.mems untouched and rely on .host-nodes passed on the
QEMU cmd line.
The placement still suffers because of cpuset.mems set for vcpus
or iothreads, but that's fixed in next commit.
Fixes: 3ec6d586bc
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Apparmor profiles in /etc/apparmor.d/ are config files that can and should
be replaced on package upgrade, which introduces the potential to overwrite
any local changes. Apparmor supports local profile customizations via
/etc/apparmor.d/local/<service> [1].
This change makes the support explicit by adding libvirtd, virtqemud, and
virtxend profile customization stubs to /etc/apparmor.d/local/. The stubs
are conditionally included by the corresponding main profiles.
[1] https://ubuntu.com/server/docs/security-apparmor
See "Profile customization" section
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In one of its commits [1] libssh2 changed the 'text' member of
LIBSSH2_USERAUTH_KBDINT_PROMPT struct from 'char' to 'unsigned
char'. But we g_strdup() the member in order to fill 'prompt'
member of virConnectCredential struct. Typecast the value to
avoid warnings. Also, drop @prompt variable, as it's needless.
1: 83853f8aea
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Use automatic memory freeing and modern XML parsers to simplify the
function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Format the rule attributes in two passes, first for positive 'match' and
second pass for negative. This removes the crazy logic for switching
between match modes inside the formatter.
The refactor makes it also more clear in which cases we actually do
format something.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLNodeGetSubelementList to get the elements to process.
The new approach documents the complexity of the parser, which is
designed to ignore unknown attributes and parse only a single kind of
them after finding the first valid one.
Note that the XML schema doesn't actually allow having multiple
sub-elements, but I'm not sure how that translates to actual configs
present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use modern parsing. Invalid numbers are now rejected. Semantis for
numbers out of range is preserved.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the fields to the proper types and use virXMLPropEnum for
parsing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLFormatElement to simplify the formatter. Drop return value of
virNWFilterRuleDefFormat as there are no errors to report.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLNodeGetSubelement(List) instead of the looped parser and
simplify the code.
Note that handling of the 'bootp' element now conforms to the schema
where we allow just one and the 'file' attribute is mandatory.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The new helper is similar to virXPathNodeSet list but for cases where we
want to get subelements directly rather than using XPath.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's nothing to clean up in the 'host' local variable on error as
the function which fills it makes sure to fill it only on success. In
such case it's also directly assigned to the array thus the 'host'
variable is cleared.
Remove the 'cleanup' label and 'ret' variable as we can now directly
return -1 on error.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract the 'inbound'/'outbound' subelements using
virXMLNodeGetSubelement to simplify the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the unnecessary check for valid arguments and use
virXMLPropULongLong instead of hand-written property parsers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Every caller will pass 'qdevid' as it's populated in the data
mandatorily with qemu-4.2 and onwards due to mandatory -blockdev use.
Thus we can drop compatibility with the old way of matching the disk via
alias.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Every caller will pass 'qdevid' as it's populated in the data
mandatorily with qemu-4.2 and onwards due to mandatory -blockdev use.
Thus we can drop compatibility with the old way of matching the disk via
alias.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically this didn't work with any supported qemu version as we
don't set the alias of the device, and thus qemu uses a different alias
resulting in a failure to startup the VM:
internal error: unable to execute QEMU command 'block_set_io_throttle': Device 'drive-sd-disk0' not found
Refuse setting throttling as this is unlikely to be needed and proper
fix requires using -device instead of -drive if=sd.
Note that this was broken when I moved the setup of throttling as a
command at startup for blockdev integration quite a while ago. Until
then throttling was passed as arguments for -drive.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function doesn't modify it. Fix the argument declaration so that the
function can be used in a context where we have a 'const' disk
definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When a user requests debug logging by setting the environment variable:
LIBVIRT_DEBUG=1
we should log any errors regardless of the setting of e.g.
'LIBVIRT_LOG_OUTPUTS' as the code will log every 'debug' and 'info'
level message to stderr but will skip 'error' level messages.
This obviously makes debugging things very complicated as you can get to
a situation when the error itself is missing.
This can happen e.g. in tests.
Fix the issue by probing the default log level and calling the logger if
it's set for VIR_LOG_DEBUG.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When starting a domain, it's done so in two steps (actually more,
but lets focus on just the following two):
1) qemuProcessPrepareDomain(), followed by
2) qemuProcessPrepareHost().
Now, in the first step (PrepareDomain()), PCI backends for all
hostdevs is set (qemuProcessPrepareDomain() ->
qemuProcessPrepareDomainHostdevs() -> qemuDomainPrepareHostdev()
-> qemuDomainPrepareHostdevPCI()). Perfect.
But then, additional hostdevs may appear, because in the host
prepare phase we may insert some hostdevs into domain definition
(qemuProcessPrepareHost() -> qemuProcessNetworkPrepareDevices()).
Now, these additional hostdevs don't undergo the same prepare as
hostdevs that were already present in the domain definition (i.e.
in qemuProcessPrepareDomain() phase). Therefore, we have to call
corresponding prepare function explicitly.
NB, the interface hotplug code (qemuDomainAttachNetDevice()) does
not suffer from this problem, because it calls top level
qemuDomainAttachHostDevice() which is used to hotplug regular
hostdevs too and as such calls qemuDomainPrepareHostdev().
Fixes: 3b87709c76
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2209853
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It's almost like we've anticipated this. Our XML parser and
formatter handles @address and @dev attributes of <portForward/>
element completely independent of each other. And as of commit
2023_03_29.b10b983~3 passt allows handling these two separately
too. All that's left is generate the cmd line according to this
new fact.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2210287
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We allow (some) domain devices to have a different <seclabel/>
than the top level domain one (this is mostly to allow access to
a resource for multiple domains). Now, we do couple of sanity
checks for such <seclabel/>, e.g. when the <label/> is specified,
but '@relabel' is set to no. But what we are missing is the
opposite: when '@relabel' is set, but no <label/> was provided.
Our schema already denies such combination. Make our parser
behave the same.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2160356
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In virNodeDeviceGetSCSIHostCaps, there is a pattern of reusing
a tmp value and stealing the pointer.
But in two case it is not stolen. Use separate variables for them
to avoid mixing autofree with manual free() calls.
Fixes: 8a0cb5f73a
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is fairly trivial. Just set .memaddr attribute if a value
was set in the XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2180679
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
After a QEMU domain is started, among other thing we query memory
device information. And while memory address is returned by QEMU
for all models, we store it only for DIMMs and NVDIMMs. Do store
it for VIRTIO_MEM and VIRTIO_PMEM too.
This effectively reports the address the virtio-mem/virtio-pmem
is mapped to in live XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Both virtio-mem and virtio-pmem devices have '.memaddr' attribute
which controls the address where they are mapped in the guest
memory. Ideally, users do not need to specify this as QEMU does
the right thing and computes addresses automatically on startup.
But soon, we will need to record this address as it is part of
guest ABI. And also, there might be some users that want to
control this value. Now, we are in a bit of a pickle, because
both these device types already have a PCI address, therefore we
can't just use <address/> blindly. But what we can do, is
introduce <address/> under the <target/> element. This is also
more conceptual, as knobs under <target/> control guest visible
config of memory device (and .memaddr surely falls into that
category).
NB, SgxEPCDeviceInfo struct in QMP definition also has .memaddr
attribute, but because of the way we build cmd line there's no
(easy) way to set the attribute. So ignore that for now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Due to missed break; statement the virDomainInputDefPostParse()
is called not only for VIR_DOMAIN_DEVICE_INPUT but also
VIR_DOMAIN_DEVICE_LEASE and VIR_DOMAIN_DEVICE_NET, which can lead
to all sort of unpredictable results.
Fixes: c4bc4d3b82
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This brings the tool's list of features in sync with qemu
commit 886c0453cbf10eebd42a9ccf89c3e46eb389c357.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
