Now that a version of GLib that contains the fix has been
released, it's more useful to record that information. Adding
a TODO annotation makes the whole thing easily greppable.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The spelling is slightly different from another otherwise
identical error message in the same file.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
At this moment it is not possible to launch a 'riscv64' domain if a CPU
definition is presented in the domain. For example, adding this CPU
definition:
<cpu mode='custom' match='exact' check='none'>
<model fallback='forbid'>rv64</model>
</cpu>
Will trigger the following error:
$ sudo ./run tools/virsh start riscv-virt1
error: Failed to start domain 'riscv-virt1'
error: this function is not supported by the connection driver:
cannot update guest CPU for riscv64 architecture
The error comes from virCPUUpdate(), via qemuProcessUpdateGuestCPU(),
and it's caused by the absence of the 'update' API in the existing
RISC-V driver.
Add an 'update' API impl to the RISC-V driver to allow for CPU
definitions to be declared in RISC-V domains. This API was copied from
the ARM driver (virCPUarmUpdate()) since it's a good enough
implementation to get us going.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Implement the support for the persisted poll parameters and remove
restrictions on saving config when modifying them during runtime.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently we allow configuring the 'poll-max-ns', 'poll-grow', and
'poll-shrink' parameters of qemu iothreads only during runtime and they
are not persisted. Add XML machinery to persist them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the internal types to unsigned long long. Luckily we can also
covert the external types too:
- 'qemuDomainSetIOThreadParams' can accept both _UINT and _ULLONG by
converting to 'virTypedParamsGetUnsigned'
- querying is handled via the bulk stats API which is flexible:
- we use virTypedParamListAddUnsigned to use the bigger type only if
necessary
- most users don't even notice because the bindings abstract the
data types
Apart from the code modifications we also improve the documentation
which was missing for the setters.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU accepts even values bigger than INT_MAX. The reasoning for these
checks was that the QAPI definition declares them as 'int', but in QAPI
terms that's any number as it's JSON.
Remove the validation as well as the comment misinterpreting the QAPI
definiton.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For certain typed parameters we want to extend the supproted range by
switching to VIR_TYPED_PARAM_ULLONG. To preserve compatibility we've
added APIs such as 'virTypedParamsGetUnsigned' and
'virTypedParamListAddUnsigned' which automatically select the bigger
type if necessary.
This patch adds a new internal macro VIR_TYPED_PARAM_UNSIGNED which
is used with virTypedParamsValidate to allow both types and adjusts the
code to handle it properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic memory cleanup for the 'keys' and 'sorted' helpers and
remove the 'cleanup' label. Since this patch is modifying variable
declarations ensure that all declarations conform with our coding style.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add an internal helper for fetching a typed parameter which can be
either of the '_UINT' or '_ULONG' type and store it in a unsigned long
long variable.
Since this is an internal helper it offers less protections against
invalid use compared to those we expose as public API.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The new helper adds a unsigned value, stored as _UINT if it fits into
the type and stored as _ULLONG otherwise.
This is useful for the statistics code which is quite tolerant to
changes in type in cases when we'll need more range for the value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function now return always 0. Refactor the code and remove return
values.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only non-abort()-ing error which can happen is if the field name is
too long. Store the overly long name in the virTypedParamList container
so that in upcoming patches the helpers adding to the list can be
refactored to not have a return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Return the number of parameters via pointer passed as argument to free
up possibility to report errors. Strangely all callers actually use
'int' as type for storing the count of elements, thus this function will
use the same.
The function is also renamed to virTypedParamListSteal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a helper that fetches the typed parameters from the list while
still preserving ownership of the pointer by the list.
In the future this will be also able to report errors stored in the
list.
Signed-off-by: Peter Krempa <pkrempa@redhat.com
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The struct will be made private in upcoming patches. Construct the list
of block entries into a separate list and append them rather than
remember the index of the count element.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Introduce a helper function to concatenate two virTypedParamLists. This
will allow us to refactor qemuDomainGetStatsBlock to not access the list
directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Add an allocator function and refactor all allocations to use it. In
upcoming patches 'struct _virTypedParamList' will be made private.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The header uses both styles randomly, switch it to the contemporary
style.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Don't check the return value of 'virTypedParamListExtend' which will
always be a valid pointer and 'virTypedParameterAssignValue' always
returns 0.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There are two callers of virTypedParameterAssignValueVArgs.
- 'virTypedParameterAssignValue' always uses the correct type, thus
doesn't need to be modified. Just use the proper type in the function
declaration
- 'virTypedParameterAssign' can get improper type, but we can move the
validation into it decreasing the scope in which failures need to be
propagated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
All changed lines even fit into 80 columns.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Ensure that all switch statements in this module use the proper type in
switch() statements to ensure complier protections.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
All callers pass 'true'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Repeatedly querying an SR-IOV PCI device's capabilities exposes a
memory leak caused by a failure to free the virPCIVirtualFunction
array within the parent struct's g_autoptr cleanup.
Valgrind output after getting a single interface's XML description
1000 times:
==325982== 256,000 bytes in 1,000 blocks are definitely lost in loss record 2,634 of 2,635
==325982== at 0x4C3C096: realloc (vg_replace_malloc.c:1437)
==325982== by 0x59D952D: g_realloc (in /usr/lib64/libglib-2.0.so.0.5600.4)
==325982== by 0x4EE1F52: virReallocN (viralloc.c:52)
==325982== by 0x4EE1FB7: virExpandN (viralloc.c:78)
==325982== by 0x4EE219A: virInsertElementInternal (viralloc.c:183)
==325982== by 0x4EE23B2: virAppendElement (viralloc.c:288)
==325982== by 0x4F65D85: virPCIGetVirtualFunctionsFull (virpci.c:2389)
==325982== by 0x4F65753: virPCIGetVirtualFunctions (virpci.c:2256)
==325982== by 0x505CB75: virNodeDeviceGetPCISRIOVCaps (node_device_conf.c:2969)
==325982== by 0x505D181: virNodeDeviceGetPCIDynamicCaps (node_device_conf.c:3099)
==325982== by 0x505BC4E: virNodeDeviceUpdateCaps (node_device_conf.c:2677)
==325982== by 0x260FCBB2: nodeDeviceGetXMLDesc (node_device_driver.c:355)
Signed-off-by: Tim Shearer <tshearer@adva.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanups, qemuHostdevPreparePCIDevices() no longer
needs virQEMUCaps. Drop its passing from callers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
After previous cleanup, there are some functions that do nothing:
qemuConnectDomainXMLToNativePrepareHostHostdev()
qemuConnectDomainXMLToNativePrepareHost()
qemuProcessPrepareHostHostdev()
qemuProcessPrepareHostHostdevs()
Remove them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When preparing a SCSI <hostdev/> with passthrough of a host SCSI
adapter (i.e. no protocol), a virStorageSource structure is
initialized and stored inside virDomainHostdevDef. But the source
structure is filled in many places, with almost the same code.
Firstly, qemuProcessPrepareHostHostdev() and
qemuConnectDomainXMLToNativePrepareHostHostdev() are the same.
Secondly, qemuDomainPrepareHostdev() allocates the src structure,
only to let qemuProcessPrepareHostHostdev() fill src->path later.
Well, src->path can be filled at the same place where the src
structure is allocated (qemuDomainPrepareHostdev()) which renders
the other two functions needless.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There is no way the qemuDomainAttachHostPCIDevice() function can
be called over a hostdev with PCI backend other than VFIO. And
even if it were, then the check is written so poorly that it lets
some types through (e.g. KVM) only to let
qemuBuildPCIHostdevDevProps() called afterwards fail properly.
Drop this check and rely on qemuDomainPrepareHostdevPCI() (and
worst case scenario even qemuBuildPCIHostdevDevProps()) to report
the proper error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We used to support KVM and VFIO style of PCI assignment. The
former was dropped in v5.7.0-rc1~103 and thus we only support
VFIO. All other backends lead to an error (see
qemuBuildPCIHostdevDevProps(), or qemuBuildPCIHostdevDevStr() as
it used to be called in the era of aforementioned commit).
Might as well report the error in prepare phase and save hassle
of proceeding with device preparation (e.g. in case of hotplug
overriding the device's driver, setting seclabels, etc.).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
virsh command domxml-to-native failed with below error but start
command succeed for same domain xml.
"internal error: invalid PCI passthrough type 'default'"
If a <hostdev> PCI backend is not set in the XML, the supported
one is then chosen in qemuHostdevPreparePCIDevicesCheckSupport().
But this function is not called anywhere from
qemuConnectDomainXMLToNative(). But qemuDomainPrepareHostdev()
is. And it is also called from domain startup/hotplug code.
Therefore, move the backend setting to the common path and drop
qemuHostdevPreparePCIDevicesCheckSupport().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
So far, qemuDomainPrepareHostdev() is a NOP for anything but a
SCSI hostdev. This will change soon. Therefore, move the SCSI
hostdev preparation into a separate function
(qemuDomainPrepareHostdevSCSI()) and make
qemuDomainPrepareHostdev() call function corresponding to the
hostdev type (or nothing if the type doesn't need any
preparation).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When attaching a hostdev of a SCSI subsys,
qemuDomainPrepareHostdev() is called. This makes sense because
the function prepares just SCSI hostdevs ignoring others. But
this will soon change. Thefore, move the function call out of
qemuDomainAttachHostSCSIDevice() and into
qemuDomainAttachHostDevice().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Treat:
<maxphysaddr mode="emulate"/>
as a request not to take the maximum address size from the host.
This is useful if QEMU changes the default.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In a few places, where a capabilities <hostdev/> is processed, a
wrong union member is access: def->source.subsys.type instead of
def->source.caps.type. Fortunately, both union members have .type
as the very first member so no real harm is done. Nevertheless,
we should access the correct union member.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Usually, we want a function to be as reusable as possible. But in
this specific case, when it's used just once we don't need that.
The lxcCreateHostdevDef() function is meant to create a hostdev.
The first argument selects the hostdev mode (caps/subsys) and the
second argument selects the type of hostdev (NET/STORAGE/MISC).
But because of how the function is written, it's impossible to
create a subsys hostdev as the function sets
hostdev->source.caps.type, regardless of mode. So the @mode
argument can be dropped.
Then, the function is called from one place and one place only.
And in there, VIR_DOMAIN_HOSTDEV_CAPS_TYPE_NET is passed for
@type so we can drop that argument too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous cleanups a lot of functions from qemu_hotplug.c
are called only within the file. Make them static and drop their
declarations from the header file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There is no good reason for qemuDomainUpdateDeviceLive() to live
in (ever growing) qemu_driver.c while we have qemu_hotplug.c
which already contains the rest of hotplug code. Move the
function to its new home.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
There is no good reason for qemuDomainAttachDeviceLive() to live
in (ever growing) qemu_driver.c while we have qemu_hotplug.c
which already contains the rest of hotplug code. Move the
function to its new home.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
The qemuDomainUpdateDeviceLive() accepts virDomainPtr as one of
its arguments, but use it only to get QEMU driver out of it.
Well, the only caller already does that and thus can pass it
instead of virDomainPtr.
This also makes it look like the rest of device hot(un-)plug
functions: qemuDomainAttachDeviceLive() and
qemuDomainUpdateDeviceLive().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
A new enum type "Default" has been added for Input bus.
The logic that handled default input bus types in
virDomainInputParseXML() has been moved to a new function
virDomainInputDefPostParse() in domain_postparse.c
Link to Issue: https://gitlab.com/libvirt/libvirt/-/issues/8
Signed-off-by: K Shiva <shiva_kr@riseup.net>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The disk private data contain information about the tray and
removability of the disk. Until recently we didn't support hotplug of
removable disks thus it wasn't a problem but now when you can hotplug a
CDROM you would not be able to open its tray.
Fix it by updating the hotplugged disk the same way we do at startup.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2160435
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Extract the logic to update one single disk (without emitting any
events) so that it can be reused when updating the state after a disk
hotplug.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code compares the 'tray_open' boolean from 'struct
qemuDomainDiskInfo' directly against 'disk->tray_status' which is
declared as virDomainDiskTray (enum). Now the logic works correctly
because the _OPEN enum has value '1'.
Separate the event emission code from the update code and remember the
old tray state in a separate variable rather than having the sneaky
logic we have today.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We exit early if poolOptions->formatToString is false.
Fixes: 9dadc73029
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In our meson scripts, we use configure_file(copy:true) to copy
files from srcdir into builddir. However, as of meson-0.64.0,
this is deprecated [1] in favor of using:
fs = import('fs')
fs.copyfile(in, out)
Except, the submodule's new method wasn't introduced until
0.64.0. And since we can't bump the minimal meson version we
require, we have to work with both: new and old versions.
Now, the fun part: fs.copyfile() is not a drop in replacement as
it returns different type (a custom_target object). This is
incompatible with places where we store the configure_file()
retval in a variable to process it further.
While we could just replace 'copy:true' with a dummy
'configuration:...' (say 'configuration: configmake_conf') we
can't do that for binary files (like src/fonts/ or src/images/).
Therefore, places where we are not interested in the retval can
be switched to fs.copyfile() and places where we are interested
in the retval will just use a dummy 'configuration:'.
Except, src/network/meson.build. In here we not just copy the
file but also specify alternative install dir and that's not
something that fs.copyfile() can handle. Yet, using 'copy: true'
is viewed wrong [2].
1: https://mesonbuild.com/Release-notes-for-0-64-0.html#fscopyfile-to-replace-configure_filecopy-true
2: https://github.com/mesonbuild/meson/pull/10042
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
With cgroupv2 this has better effect on the resource allocation. An
excerpt from Documentation/admin-guide/cgroup-v2.rst explains is this
way:
Migrating a process across cgroups is a relatively expensive operation
and stateful resources such as memory are not moved together with the
process. This is an explicit design decision as there often exist
inherent trade-offs between migration and various hot paths in terms
of synchronization cost.
[...]
Setting a non-empty value to "cpuset.mems" causes memory of
tasks within the cgroup to be migrated to the designated nodes if
they are currently using memory outside of the designated nodes.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most of them are platform devices and only i6300esb can be plugged
multiple times into different PCI slots.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This makes it also work during attach. Also add a test for attaching a
watchdog with incompatible action.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2187278
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The loop initially skipped the first one because it was mainly checking
the incompatible actions, but was then modified to also check the
duplicity of iTCO watchdogs.
While at it change the type of the iteration variable to the usual size_t.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2187133
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can launch qemu with it, but it will not work since it's not even
probed by the kernel at the mapped address with different machine types
since they are expected to be connected to ISA and not even its newer
LPC counterpart found on q35. And it does not exist on non-x86
architectures.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When starting QEMU, or when hotplugging a PCI device QEMU might
lock some memory. How much? Well, that's an undecidable problem.
But despite that, we try to guess. And it more or less works,
until there's a counter example. This time, it's a guest with
both <hostdev/> and an NVMe <disk/>. I've started a simple guest
with 4GiB of memory:
# virsh dominfo fedora
Max memory: 4194304 KiB
Used memory: 4194304 KiB
And here are the amounts of memory that QEMU tried to lock,
obtained via:
grep VmLck /proc/$(pgrep qemu-kvm)/status
1) with just one <hostdev/>
VmLck: 4194308 kB
2) with just one NVMe <disk/>
VmLck: 4328544 kB
3) with one <hostdev/> and one NVMe <disk/>
VmLck: 8522852 kB
Now, what's surprising is case 2) where the locked memory exceeds
the VM memory. It almost resembles VDPA. Therefore, treat is as
such.
Unfortunately, I don't have a box with two or more spare NVMe-s
so I can't tell for sure. But setting limit too tight means QEMU
refuses to start.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2014030
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This is a relic of commit v3.7.0-rc1~132 when getter/setter APIs
for dnsmasq's PID were introduced. Previously, obj->dnsmasqPid
was accessed directly. But the aforementioned commit introduced
two calls to virNetworkObjGetDnsmasqPid() even though the result
of the first call is stored in a variable.
Remove the second call as it's unnecessary.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Throughout all of our network driver code we assume that
dnsmasqPid of value -1 means the network has no dnsmasq process
running. There are plenty of calls to:
virNetworkObjSetDnsmasqPid(obj, -1);
or:
pid_t dnsmasqPid = virNetworkObjGetDnsmasqPid(obj);
if (dnsmasqPid > 0) ...;
Now, a virNetworkObj is created via virNetworkObjNew() which
might as well set this de-facto default value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assume there's a dnsmasq running (because there's an active
virtual network that spawned it). Now, shut down the daemon,
remove the dnsmasq binary and start the daemon again. At this
point, networkUpdateState() is called, but dnsmasq_caps is NULL
(because networkStateInitialize() called earlier failed to set
them, rightfully though).
Now, the networkUpdateState() tries to read the dnsmasq's PID
file using virPidFileReadIfAlive() which takes a path to the
corresponding binary as one of its arguments. To provide that
path, dnsmasqCapsGetBinaryPath() is called, but since
dnsmasq_caps is NULL, it dereferences it and thus causes a crash.
It's true that virPidFileReadIfAlive() can deal with a removed
binary (well virPidFileReadPathIfAlive() which it calls can), but
iff the binary path is provided in its absolute form. Otherwise,
virFileResolveAllLinks() fails to canonicalize the path
(expected, the path doesn't exist anyway).
Therefore, reading dnsmasq's PID file didn't work before
v8.1.0-rc1~401 which introduced this crash. It was always set to
-1. But passing NULL as binary path instead, makes
virPidFileReadIfAlive() return early, right after the PID file is
read and it's confirmed the PID exists.
Yes, this may yield wrong results, as the PID might be of a
completely different binary. But this problem is preexistent and
until we start locking PID files, there's nothing we can do about
it. IOW, it would require rework of dnsmasq PID file handling.
Fixes: 4b68c982e2
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/456
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's quite difficult, if not impossible, to create a working RISC-V VMs
using the current default machine type of 'spike_v1.10'. Change the
default to the more appropriate and virtualization friendly 'virt'
machine type.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
It's quite difficult, if not impossible, to create a usable ARM VMs
using the current default machine type of 'integratorcp'. Change the
default to the more appropriate and virtualization friendly 'virt'
machine type.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
I've tried, then I've tried even harder, but still wasn't able to
make sense of our console backcompat code in all its fine
details. Since I value my sanity, let's just forbid hotunplug of
<console/>, especially since detaching of corresponding <serial/>
works.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When cleaning up after removed device, qemuDomainChrRemove() is
called. But this may fail, in which case we successfully ignore
the failure and virDomainChrDefFree() the device anyway. While it
decreases our memory consumption, it's a bit too far, especially
if the next step is 'virsh dumpxml'. Then our memory consumption
decreases all the way down to zero as we crash.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For a running guest, a <serial/> device can be hotunplugged. This
will then remove also aliased <console/>. Trying to hotplug a
<console/> device then, libvirtd crashed because it dereferences
def->consoles while there's none.
Fixes: 42d53ac799
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When removing the compat console from domain defintion, removing
it from the vmdef->consoles array is good, but not sufficient.
The console definition might have been fully allocated (after
daemon restarted and reloaded the status XML). Use
virDomainChrDefFree() to free also the definition.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When hotpluging a <serial/> device, we might need to add a
<console/> device with it (because of some crazy backcompat).
Now, hotplugging is done in several phases. In one of them,
qemuDomainChrPreInsert() allocates space for both devices, and
then qemuDomainChrInsertPreAlloced() actually inserts the device
into domain definition and sets up the <console/> device with it.
Except, the condition that checks whether to create the aliased
<console/> is wrong as it compares nconsoles against 0.
Surprisingly, qemuDomainChrInsertPreAllocCleanup() doesn't suffer
from the same error.
Fixes: daf51be5f1
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
That's already the case in practice, but it's a better
experience for the user if we reject this configuration
outright instead of silently ignoring part of it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Follow better meson build system conventions. This allows to find
keymap-gen or CSV without explicitly setting the paths.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function does not exist on win32.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
meson wraps python scripts already on win32, so we end up with these
failing commands:
[1/359] "C:/msys64/ucrt64/bin/meson" "--internal" "exe" "--capture" "src/util/virkeycodetable_atset1.h" "--" "sh" "C:/msys64/home/marca/src/libvirt/scripts/meson-python.sh" "C:/msys64/ucrt64/bin/python3.EXE" "python" "C:/msys64/home/marca/src/libvirt/src/keycodemapdb/tools/keymap-gen" "code-table" "--lang" "stdc" "--varname" "virKeyCodeTable_atset1" "C:/msys64/home/marca/src/libvirt/src/keycodemapdb/data/keymaps.csv" "atset1"
FAILED: src/util/virkeycodetable_atset1.h
"C:/msys64/ucrt64/bin/meson" "--internal" "exe" "--capture" "src/util/virkeycodetable_atset1.h" "--" "sh" "C:/msys64/home/marca/src/libvirt/scripts/meson-python.sh" "C:/msys64/ucrt64/bin/python3.EXE" "python" "C:/msys64/home/marca/src/libvirt/src/keycodemapdb/tools/keymap-gen" "code-table" "--lang" "stdc" "--varname" "virKeyCodeTable_atset1" "C:/msys64/home/marca/src/libvirt/src/keycodemapdb/data/keymaps.csv" "atset1"
If LC_ALL, LANG and LC_CTYPE need to be set, it would probably be better
to use a meson environment() instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use 'dirs' argument to locate the program.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A number of changes, but notably python script shebang fixing build
issues in CI:
Daniel P. Berrangé (1):
Revert "Add local argparse for compat with python 2.6"
Dawid Dziurla (1):
Don't hardcode python3 path in shebang
Eli Schwartz (1):
make the meson.build stub a bit more well-rounded by exporting files
Pierre Ossman (1):
Fix macOS "ISO" key
Ross Lagerwall (2):
Use python3 binary rather than unversioned python
Fix Hangeul/Hanja scancodes
William (1):
Add Qemu qcode support for F13 to F24
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Rewrite the code to improve maintainability and also re-do construction
of error messages which are assembled from non-translatable parts.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/455
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit dbf1f68410 ("security: do not remember/recall labels for VFIO")
rightly changed the DAC and SELinux labeling parameters to fix a problem
with "VFIO hostdevs" but really only addressed the PCI codepaths.
As a result, we can still encounter this with VFIO MDEVs such as
vfio-ccw and vfio-ap, which can fail on a hotplug:
[test@host ~]# mdevctl stop -u 11f2d2bc-4083-431d-a023-eff72715c4f0
[test@host ~]# mdevctl start -u 11f2d2bc-4083-431d-a023-eff72715c4f0
[test@host ~]# cat disk.xml
<hostdev mode='subsystem' type='mdev' model='vfio-ccw'>
<source>
<address uuid='11f2d2bc-4083-431d-a023-eff72715c4f0'/>
</source>
<address type='ccw' cssid='0xfe' ssid='0x0' devno='0x3c51'/>
</hostdev>
[test@host ~]# virsh attach-device guest ~/disk.xml
error: Failed to attach device from /home/test/disk.xml
error: Requested operation is not valid: Setting different SELinux label on /dev/vfio/3 which is already in use
Make the same changes as reported in commit dbf1f68410, for the mdev paths.
Reported-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
igb is a new network device which will be introduced with QEMU 8.0.0.
It is a successor of e1000e so it has PCIe interface and is understands
virtio-net headers as e1000e does.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
During qemu driver shutdown, objects are freed in qemuStateCleanup that
could still be used by active worker threads, resulting in crashes. E.g.
a worker thread could be processing a monitor EOF event after the
security manager is already disposed
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x00007fd9a9a1e1fe in virSecurityManagerMoveImageMetadata (mgr=0x7fd948012160, pid=-1, src=src@entry=0x7fd98c072c90, dst=dst@entry=0x0)
at ../../src/security/security_manager.c:468
#1 0x00007fd9646ff0f0 in qemuSecurityMoveImageMetadata (driver=driver@entry=0x7fd948043830, vm=vm@entry=0x7fd98c066db0, src=src@entry=0x7fd98c072c90,
dst=dst@entry=0x0) at ../../src/qemu/qemu_security.c:182
#2 0x00007fd96462c7b0 in qemuBlockRemoveImageMetadata (driver=driver@entry=0x7fd948043830, vm=vm@entry=0x7fd98c066db0, diskTarget=0x7fd98c072530 "vda",
src=<optimized out>) at ../../src/qemu/qemu_block.c:2628
#3 0x00007fd9646929d6 in qemuProcessStop (driver=driver@entry=0x7fd948043830, vm=vm@entry=0x7fd98c066db0, reason=reason@entry=VIR_DOMAIN_SHUTOFF_SHUTDOWN,
asyncJob=asyncJob@entry=QEMU_ASYNC_JOB_NONE, flags=<optimized out>) at ../../src/qemu/qemu_process.c:7585
#4 0x00007fd9646fc842 in processMonitorEOFEvent (vm=0x7fd98c066db0, driver=0x7fd948043830) at ../../src/qemu/qemu_driver.c:4794
#5 qemuProcessEventHandler (data=0x561a93febb60, opaque=0x7fd948043830) at ../../src/qemu/qemu_driver.c:4900
#6 0x00007fd9a9971a31 in virThreadPoolWorker (opaque=opaque@entry=0x561a93fb58e0) at ../../src/util/virthreadpool.c:163
(gdb) p mgr->drv
$2 = (virSecurityDriverPtr) 0x0
Prior to commit 7cf76d4e3a, the worker thread pool was freed before
disposing any driver objects. Let's return to that pattern, but leave
the other changes made by 7cf76d4e3a.
Signed-off-by: Tamara Schmitz <tamara.schmitz@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Introduce a small kludge in the parser to avoid unnecessarily
blocking incoming migration from a range of recent libvirt
releases.
https://bugzilla.redhat.com/show_bug.cgi?id=2184966
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In an effort to separate the validation steps from the Parse stage,
a few validation checks of virDomainGraphicsListenDef have been moved from
virDomainGraphicsListenDefParseXML() in domain_conf.c to
virDomainGraphicsDefListensValidate() in domain_validate.c
Signed-off-by: K Shiva <shiva_kr@riseup.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically the snapshot code attempted to forbid internal snapshots
with UEFI both in active and inactive case. Unfortunately due to the
intricacies of UEFI probing this didn't really work for inactive VMs
which made users rely on the feature.
Now with the changes to store detected UEFI environment also in the
inactive definition this broke the feature for those users.
Since the varstore doesn't really change that much in the lifecycle of a
VM it usually is okay to simply leave it as is.
Restore the functionality for inactive snapshots by disabling the check.
In the future when uefi snapshotting will be added the rest of the
condition will also be removed.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/460
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function always returns 0. Remove the return value and refactor
caller.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Inside of virAcpiParseIORTNodeHeader() there's an
virReportError() which reports size of a structure using sizeof()
operator. Well, it's not well documented but the returned type of
sizeof() is apparently size_t but the format string uses %lu.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The aim of this new module is to contain code that's parsing ACPI
tables. For now, only parsing of IORT table is implemented (it's
ARM specific table). And since we only need to check whether the
table contains SMMU record, the code is very simplified.
I've followed the specification published here:
https://developer.arm.com/documentation/den0049/latest/
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Attaching disk into running VM the offline definition may not be
updated and we will end up with that disk existing only in live
definition. Creating snapshot with this state saves both live and
offline definition into snapshot metadata.
When we are deleting an external snapshot we are updating these
definitions in the snapshot metadata so we should just skip over
non-existing disks instead of reporting error.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2174700
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unify validation of VIR_DOMAIN_FEATURE_HTM, VIR_DOMAIN_FEATURE_NESTED_HV,
VIR_DOMAIN_FEATURE_CCF_ASSIST and remove temporary string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The features:
QEMU_CAPS_MACHINE_PSERIES_CAP_HPT_MAX_PAGE_SIZE
QEMU_CAPS_MACHINE_PSERIES_CAP_HTM
QEMU_CAPS_MACHINE_PSERIES_CAP_NESTED_HV
QEMU_CAPS_MACHINE_PSERIES_CAP_CCF_ASSIST
QEMU_CAPS_MACHINE_PSERIES_CAP_CFPC
QEMU_CAPS_MACHINE_PSERIES_CAP_SBBC
QEMU_CAPS_MACHINE_PSERIES_CAP_IBS
are supported by all qemu versions that libvirt supports. Drop the
obsolete checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use automatic pointer freeing, remove 'ret' variable and also remove
return value completely.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove useless call to virCapabilitiesFreeMachines as the pointers were
cleared and the unneeded 'ret' variable. Since we don't need to clear
the 'machines' pointer now, remove that as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Simplify use of the function by determining the number of elements
inside the function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Get rid of nested ternaries by adding a few helper variables and more
explicit if conditions to fill them appropriately.
Note that 'virCapabilitiesAllocMachines' doesn't require return value
check any more as it can't fail.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's never set to any real value. Remove it along with the caching code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's more stuff than device info to clear nowadays. Drop the
misleading comment. Shorten the comment saying that device info is freed
elsewhere when 'parentnet' is present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate the architecture specific code to probe the support for HVF
from the actual setting of the capability.
In upcoming patches 'virQEMUCapsProbeHVF' will be mocked in the
testsuite to provide testing for the HVF hypervisor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The logic in 'virQEMUCapsInitQMP' invokes a second probe of qemu in case
when acceleration is used and TCG is supported to specifically probe the
CPU and features of non-accelerated guests.
The same logic must then be used in 'qemucapabilitiestest' when
replaying the data for testing otherwise the test would fail.
Export 'virQEMUCapsHaveAccel' for test usage and use the same logic
in 'testQemuCaps'.
Fix the comment in 'virQEMUCapsInitQMP' to outline what's happening.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capabilities generated on OSX hosts with 'hvf' accelerator will not
pass schema testing as the 'hvf' type was not allowed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When opening a connection, it may be necessary to provide user
credentials, or some additional info (e.g. whether to trust an
ssh key). We have a special API for that: virConnectOpenAuth()
where and additional callback can be passed. This callback is
then called with _virConnectCredential struct filled partially
and it's callback's responsibility to get desired data (e.g. by
prompting user) and store it into .result member of the struct.
But we document the callback behaviour as:
When authentication requires one or more interactions, this callback
is invoked. For each interaction supplied, data must be gathered
from the user and filled in to the 'result' and 'resultlen' fields.
If an interaction cannot be filled, fill in NULL and 0.
Returns 0 if all interactions were filled, or -1 upon error
But there are some buggy callbacks out there, which set:
.result = NULL;
.resultlen = 0;
and return 0. Report an error when such buggy callback is met.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2181235
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
