Return whether a relevant cachemode was presented rather than returning
an error, so that callers can be simplified. Use the proper enum type as
argument rather than typecasting in the switch statement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The aforementioned fields in virStorageSource struct are copies of the
disk properties, but were not converted to the proper type yet.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Certain disk config fields are mirrored between the disk and storage
source definitions, but the proper types are not available for use in
the virStorageSource definition. Move them so they can be used properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Formatting of the 'nbdkit' driven backend breaks out of the switch
statement so we don't need to have an unnecessary block and indentation
level for the case when nbdkit is not in use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemuBuildDriveSourceStr' used to build the legacy -drive commandline
for SD cards is the only user of qemuDiskSourceGetProps. Move the helper
directly inline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'auto-read-only' blockdev option is available in all supported qemu
versions so we can remove the migration hack which disabled it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a few examples of SD cards backed with network storage to capture
the current state as the formatter code is about to be refactored.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The situation is the same as Linux: since glibc no
longer includes the RPC functionality, libtirpc must
be used to complement it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We want at least one file to always be present, so that it can
serve as a pointer for users. Ensure that this is the case by
unconditionally using the value of the respective keys.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's somewhat confusing that some of the services have a
corresponding foo.service.extra.in and foo.socket.extra.in, some
have just one of the two, and some have neither.
In order to make things more approachable, make sure that both
files exists for each service.
In most cases the extra units are currently unused, so they will
just contain a comment briefly explaining their purpose and
pointing users to meson.build, where they can find more
information. The same comment is also added to the top of
extra units that already have some contents in them for
consistency.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently the script will reject any type of contents outside
of a section, but we want to be able to have some useful
comments at the top of each file to help users understand how
they are processed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that the underlying script is able to merge an arbitrary
number of units into the base template, expose this possibility
in the build system.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In order to further deduplicate the contents of the various unit
files, we need to be able to merge multiple additional units
into the initial one.
Luckily the merge logic is in no way constrained to working with
just two units, so achieving this is pretty much just a matter
of lifting the existing limitation on the number of arguments
that the script accepts.
As a special case, it's now also possible to call the script
with just the base unit as argument. No merging will be performed
in that case, obviously, but we'll still go through the basic
validation and cleanup steps.
This also fixes a bug in the check for the number of arguments:
sys.argv also contains the name of the script, so we should have
checked that its size was at least 3. The check is now written in
a way that's less prone to misunderstandings.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It uses custom templates which already hardcode the correct
value.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When starting a guest via libvirt (`virsh create --console`), early
console output was missed because the guest was started first and then
the console was attached. This patch changes this to the following
sequence:
1. create a paused transient guest
2. attach the console
3. resume the guest
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When starting a guest via libvirt (`virsh start --console`), early
console output was missed because the guest was started first and then
the console was attached. This patch changes this to the following
sequence:
1. create a paused guest
2. attach the console
3. resume the guest
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the command line flag `--resume` to the `virsh console`
command. This resumes a paused guest after connecting to the console.
This might be handy since it's a "common" pattern to start a guest
paused, connect to the console, and then resume it so as not to miss any
console messages.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
commit v9.8.0-40-g7cbd8c4230 changed the name of the option that
enables/disables nbdkit support in the build from "libnbd" to
"nbdkit", but one use of "libnbd=disabled" was missed in
libvirt.specfile.in - the meson commandline for mingw.
This patch changes that line to "-Dnbdkit=disabled", thus unbreaking
the rpm build.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/550
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Starting v18, cloud-hypervisor supports serial and console devices in
parallel. Drop related check based on ch version.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Starting with v28.0 cloud-hypervisor requires the use of "payload" api to pass
kernel, initramfs and cmdline options. Extend ch driver to use the new
api based on ch version.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function virHostCPUGetPhysAddrSize was introduced with commit be1b7d5b18
fails on architectures other than x86 and SuperH. The commit 8417c1394c
fixed the issue only for s390 but the problem is still seen on other
architectures like ppc which does not report Physical address size in their
cpuinfo output.
command:
systemctl restart libvirtd.service
Output :
<snip>
dnsmasq[2377]: read /var/lib/libvirt/dnsmasq/default.addnhosts - 0
addresses
dnsmasq-dhcp[2377]: read /var/lib/libvirt/dnsmasq/default.hostsfile
libvirtd[3163]: libvirt version: 9.8.0
libvirtd[3163]: hostname: xxxxxxxxxx
libvirtd[3163]: internal error: Missing or invalid CPU address size in
/proc/cpuinfo
libvirtd.service: Deactivated successfully.
</snip>
This patch fixes this issue by returning the size=0 for architectures
other than x86 and SuperH.
Signed-off-by: Narayana Murty N <nnmlinux@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
vmDef->fss[i]->src->path may be NULL,
so check is needed before passing it to VIR_DEBUG.
Also removed checking vmDef->fss[i]->src for NULL, since it may not be NULL.
Fixes: 57487085dc ("lxc: don't try to reference NULL when mounting filesystems")
Signed-off-by: Dmitry Frolov <frolov@swemel.ru>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, libvirt doesn't send events when devices are attached,
detached or updated. Thus, any services that listen to events are
unaware of the change to persistent config.
Signed-off-by: Fima Shevrin <efim.shevrin@virtuozzo.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Considering that at the virSecuritySELinuxSetFilecon() function can only
return 0 or -1 and so does the virSecuritySELinuxFSetFilecon(), the check
for '1' at the end of virSecuritySELinuxSetImageLabelInternal() is
effectively a dead code. Drop it.
Co-developed-by: sdl.qemu <sdl.qemu@linuxtesting.org>
Signed-off-by: Sergey Mironov <mironov@fintech.ru>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Inside of myDomainEventMemoryFailureCallback() arguments are
printed via printf but '%d' is used to print @flags (of type
uint). Use '0x%x' instead, just like we do everywhere else.
Signed-off-by: zhujun2 <zhujun2@cmss.chinamobile.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While the name itself doesn't matter, this rename is done to prove that
all places using 'nodeformat' were converted to the appropriate
accessors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The persistent bitmaps are stored in the format layer, using 'effective'
bitmap name is the most reasonable approach in this case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The blockjob, NBD export and setup of the cookie data all care about the
effective nodename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The frontend device needs to access the blocks directly so it cares
about the effective nodename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In most cases the bitmap operations are relevant only on qcow2 images
thus the 'format' layer will be present. Although in certain specific
cases temporary bitmaps can be created on top of other images as well,
thus we use the 'effective' bitmap name in all cases for bitmap
operations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
I case of statistics we're interested in the statistics of the effective
bitmap whatever it happens to be.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The disk backend setup code is concerned only about the effective
nodename. Doing this conversion will also simplify further changes
needed to drop the 'raw' layer in cases when it's not really needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test code cares mostly about the actual layer nodenames thus,
appropriate accessors are used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code setting the nodenames needs to use the 'true' nodename of the
format layer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the main -blockdev JSON object setup code to use the new
accessors. In these we use mainly the real 'format' layer node name.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the effective nodename for naming the job as we use that one now.
It doesn't matter too much which one we pick, because it's used just for
the name of the job, which we preserve in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both modified cases in this patch require the effective nodename as they
deal with the data being backed up.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a set of accessors, which return node names based on
semantics. This will allow to us to modify how we setup the backing
chain in cases when e.g. the format driver can be omitted, without
breaking all the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While the name itself doesn't matter, this rename is done to prove that
all places using 'nodestorage' were converted to the appropriate
accessors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to keep setting the block threshold on the real storage layer
per semantics of the API. Use the appropriate accessor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
