Commit Graph

12679 Commits

Author SHA1 Message Date
Peter Krempa
e84b19316a maint: Rename xmlconf to xmlopt and virDomainXMLConfig to virDomainXMLOption
This patch is the result of running:

for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
  sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done

and a few manual tweaks.
2013-04-04 22:18:56 +02:00
Daniel P. Berrange
8d3d05d3c1 Create fake NUMA info if libnuma isn't available
If libnuma is not compiled in, or numa_available() returns an
error, stub out fake NUMA info consisting of one NUMA cell
containing all CPUs and memory.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-04 11:07:32 +01:00
Daniel P. Berrange
4a2891510b Cope with missing /sys/devices/system/cpu/cpu0/topology files
Not all kernel builds have any entries under the location
/sys/devices/system/cpu/cpu0/topology. We already cope with
that being missing in some cases, but not all. Update the
code which looks for thread_siblings to cope with the missing
file

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-04 11:07:32 +01:00
Daniel P. Berrange
9c29c52c5a Add armv6l architecture to list of valid arches
The Raspberry Pi runs the armv6l architecture and apparently
people are trying to run libvirt LXC on it. So we should allow
that as a valid arch

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-04 11:07:32 +01:00
Daniel P. Berrange
347081effa Implement minimal sysinfo for ARM platforms
Implement the bare minimal sysinfo for ARM platforms by
reading the CPU models from /proc/cpuinfo

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-04 11:07:31 +01:00
Daniel P. Berrange
0464ab183d Disable of unused sysinfotest functions
Certain functions in the sysinfotest.c are not used unless
a whitelisted architecture is being built. Disable those
functions unless required to avoid warnings about unused
functions.

sysinfotest.c:93:1: warning: 'sysinfotest_run' defined but not used [-Wunused-function]
 sysinfotest_run(const char *test,

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-04 11:07:00 +01:00
Daniel P. Berrange
6263fc5a5b Wire up sysinfo for LXC driver
The sysinfo code used by QEMU is trivially portable to the
LXC driver
2013-04-04 11:07:00 +01:00
Daniel P. Berrange
e2b373e6d6 Add support for SD cards in nodedev driver
The nodedev driver currently only detects harddisk, cdrom
and floppy devices. This adds support for SD cards, which
are common storage for ARM devices, eg the Google ChromeBook

<device>
  <name>block_mmcblk0_0xb1c7c08b</name>
  <parent>computer</parent>
  <capability type='storage'>
    <block>/dev/mmcblk0</block>
    <drive_type>sd</drive_type>
    <serial>0xb1c7c08b</serial>
    <size>15758000128</size>
    <logical_block_size>512</logical_block_size>
    <num_blocks>30777344</num_blocks>
  </capability>
</device>

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-04 11:07:00 +01:00
Daniel P. Berrange
edd87fa2ea Revert "lxc: Prevent shutting down the host"
This reverts commit c9c87376f2.

Now that we force all containers to have a root filesystem,
there is no way the host's /dev is ever exposed

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-04 10:51:59 +01:00
Daniel P. Berrange
c131525bec Auto-add a root <filesystem> element to LXC containers on startup
Currently the LXC container code has two codepaths, depending on
whether there is a <filesystem> element with a target path of '/'.
If we automatically add a <filesystem> device with src=/ and dst=/,
for any container which has not specified a root filesystem, then
we only need one codepath for setting up the filesystem.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-04 10:51:59 +01:00
Daniel P. Berrange
f7e8653f7e Remove support for old kernels lacking private devpts
Early on kernel support for private devpts was not widespread,
so we had compatibiltiy codepaths. Such old kernels are not
seriously used for LXC these days, so the compat code can go
away

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-04 10:51:59 +01:00
Atsushi Kumagai
d369e50825 storage: Fix volume cloning for logical volume.
When creating a logical volume with virStorageVolCreateXMLFrom,
"qemu-img convert" is called internally if clonevol is a file volume.
Then, vol->target.format is used as output_fmt parameter but the
target.format of logical volumes is always 0 because logical volumes
haven't the volume format type element.

Fortunately, 0 was treated as RAW file format before commit f772b3d9,
so there was no problem. But now, 0 is treated as the type of none,
qemu-img fails with "Unknown file format 'none'".

This patch fixes this issue by treating output block devices as RAW
file format like for input block devices.

Signed-off-by: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
2013-04-04 10:52:07 +02:00
Guido Günther
ea151935bb security_manager: fix comparison
otherwise we crash later on if we don't find a match like:

 #0  0xb72c2b4f in virSecurityManagerGenLabel (mgr=0xb8e42d20, vm=0xb8ef40c0) at security/security_manager.c:424
 #1  0xb18811f3 in qemuProcessStart (conn=conn@entry=0xb8eed880, driver=driver@entry=0xb8e3b1e0, vm=vm@entry=0xb8ef58f0,
     migrateFrom=migrateFrom@entry=0xb18f6088 "stdio", stdin_fd=18,
     stdin_path=stdin_path@entry=0xb8ea7798 "/var/lib/jenkins/jobs/libvirt-tck-build/workspace/tck.img", snapshot=snapshot@entry=0x0,
     vmop=vmop@entry=VIR_NETDEV_VPORT_PROFILE_OP_RESTORE, flags=flags@entry=2) at qemu/qemu_process.c:3364
 #2  0xb18d6cb2 in qemuDomainSaveImageStartVM (conn=conn@entry=0xb8eed880, driver=driver@entry=0xb8e3b1e0, vm=0xb8ef58f0, fd=fd@entry=0xb6bf3f98,
     header=header@entry=0xb6bf3fa0, path=path@entry=0xb8ea7798 "/var/lib/jenkins/jobs/libvirt-tck-build/workspace/tck.img",
     start_paused=start_paused@entry=false) at qemu/qemu_driver.c:4843
 #3  0xb18d7eeb in qemuDomainRestoreFlags (conn=conn@entry=0xb8eed880,
     path=path@entry=0xb8ea7798 "/var/lib/jenkins/jobs/libvirt-tck-build/workspace/tck.img", dxml=dxml@entry=0x0, flags=flags@entry=0)
     at qemu/qemu_driver.c:4962
 #4  0xb18d8123 in qemuDomainRestore (conn=0xb8eed880, path=0xb8ea7798 "/var/lib/jenkins/jobs/libvirt-tck-build/workspace/tck.img")
     at qemu/qemu_driver.c:4987
 #5  0xb718d186 in virDomainRestore (conn=0xb8eed880, from=0xb8ea87d8 "/var/lib/jenkins/jobs/libvirt-tck-build/workspace/tck.img") at libvirt.c:2768
 #6  0xb7736363 in remoteDispatchDomainRestore (args=<optimized out>, rerr=0xb6bf41f0, client=0xb8eedaf0, server=<optimized out>, msg=<optimized out>)
     at remote_dispatch.h:4679
 #7  remoteDispatchDomainRestoreHelper (server=0xb8e1a3e0, client=0xb8eedaf0, msg=0xb8ee72c8, rerr=0xb6bf41f0, args=0xb8ea8968, ret=0xb8ef5330)
     at remote_dispatch.h:4661
 #8  0xb720db01 in virNetServerProgramDispatchCall (msg=0xb8ee72c8, client=0xb8eedaf0, server=0xb8e1a3e0, prog=0xb8e216b0)
     at rpc/virnetserverprogram.c:439
 #9  virNetServerProgramDispatch (prog=0xb8e216b0, server=server@entry=0xb8e1a3e0, client=0xb8eedaf0, msg=0xb8ee72c8) at rpc/virnetserverprogram.c:305
 #10 0xb7206e97 in virNetServerProcessMsg (msg=<optimized out>, prog=<optimized out>, client=<optimized out>, srv=0xb8e1a3e0) at rpc/virnetserver.c:162
 #11 virNetServerHandleJob (jobOpaque=0xb8ea7720, opaque=0xb8e1a3e0) at rpc/virnetserver.c:183
 #12 0xb70f9f78 in virThreadPoolWorker (opaque=opaque@entry=0xb8e1a540) at util/virthreadpool.c:144
 #13 0xb70f94a5 in virThreadHelper (data=0xb8e0e558) at util/virthreadpthread.c:161
 #14 0xb705d954 in start_thread (arg=0xb6bf4b70) at pthread_create.c:304
 #15 0xb6fd595e in clone () at ../sysdeps/unix/sysv/linux/i386/clone.S:130

This unbreaks libvirt-tck's domain/100-transient-save-restore.t with
qemu:///session and selinux compiled in but disabled.

Introduced by 8d68cbeaa8
2013-04-03 22:57:31 +02:00
Eric Blake
e52a31d166 qemu: fix memory leak on -machine usage error
Commit f84b92ea introduced a memory leak on error; John Ferlan reported
that valgrind caught it during 'make check'.

* src/qemu/qemu_command.c (qemuBuildMachineArgStr): Plug leak.
2013-04-03 11:55:18 -06:00
Daniel P. Berrange
fc8c1787d8 Enable full RELRO mode
By passing the flags -z relro -z now to the linker, we can force
it to resolve all library symbols at startup, instead of on-demand.
This allows it to then make the global offset table (GOT) read-only,
which makes some security attacks harder.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-03 16:19:35 +01:00
Daniel P. Berrange
1150999ca4 Build all binaries with PIE
PIE (position independent executable) adds security to executables
by composing them entirely of position-independent code (PIC. The
.so libraries already build with -fPIC. This adds -fPIE which is
the equivalent to -fPIC, but for executables. This for allows Exec
Shield to use address space layout randomization to prevent attackers
from knowing where existing executable code is during a security
attack using exploits that rely on knowing the offset of the
executable code in the binary, such as return-to-libc attacks.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-03 16:19:35 +01:00
Peter Krempa
24ca8fae64 qemu-blockjob: Fix limit of bandwidth for block jobs to supported value
The JSON generator is able to represent only values less than LLONG_MAX, fix the
bandwidth limit checks when converting to value to catch overflows before they
reach the generator.
2013-04-03 16:38:51 +02:00
Osier Yang
ad5298e177 rng: Add definition for network disk source
It's long enough to have a independant definition.
2013-04-03 20:14:05 +08:00
Daniel P. Berrange
ad42b34b1b Disable static libraries by default
Every source file is currently built twice by libtool, once for
the shared library and once for the static library. Static libs
are not commonly packaged by distros and slow down compilation
time by more than 50% compared to a shared-only build time.

Time for 'make -j 4':

      shared only: 2 mins  9 secs
  shared + static: 3 mins 26 secs

Time for non-parallel make

      shared only: 3 mins 32 secs
  shared + static: 5 mins 41 secs

Those few people who really want them, can pass --enable-static
to configure

Disabling them by default requires use of LT_INIT, but for
compat with RHEL5 we can't rely on that. So we conditionally
use LT_INIT, but fallback to AM_PROG_LIBTOOL if not present.
2013-04-03 11:02:27 +01:00
Peter Krempa
f006f19561 virsh: Fix typo in docs
s/persitent/persistent/
2013-04-03 11:38:57 +02:00
Michal Privoznik
8d68cbeaa8 sec_manager: Refuse to start domain with unsupported seclabel
https://bugzilla.redhat.com/show_bug.cgi?id=947387

If a user configures a domain to use a seclabel of a specific type,
but the appropriate driver is not accessible, we should refuse to
start the domain. For instance, if user requires selinux, but it is
either non present in the system, or is just disabled, we should not
start the domain. Moreover, since we are touching only those labels we
have a security driver for, the other labels may confuse libvirt when
reconnecting to a domain on libvirtd restart. In our selinux example,
when starting up a domain, missing security label is okay, as we
auto-generate one. But later, when libvirt is re-connecting to a live
qemu instance, we parse a state XML, where security label is required
and it is an error if missing:

  error : virSecurityLabelDefParseXML:3228 : XML error: security label
  is missing

This results in a qemu process left behind without any libvirt control.
2013-04-03 10:19:46 +02:00
Martin Kletzander
e7cd2844ca Allow multiple parameters for schedinfo
virsh schedinfo was able to set only one parameter at a time (not
counting the deprecated options), but it is useful to set more at
once, so this patch adds the possibility to do stuff like this:

virsh schedinfo <domain> cpu_shares=0 vcpu_period=0 vcpu_quota=0 \
emulator_period=0 emulator_quota=0

Invalid scheduler options are reported as well.  These were previously
reported only if the command hadn't updated any values (when
cmdSchedInfoUpdate returned 0).

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=810078
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=919372
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=919375
2013-04-03 08:49:30 +02:00
Peter Krempa
43b6f304bc qemu: Fix crash when updating media with shared device
Mimic the fix done in 02b9097274 to fix crash by
accessing an already freed structure. Also copy the explaining comment why the
pointer can't be accessed any more.
2013-04-02 23:15:00 +02:00
Michal Privoznik
deb86ee912 virsh: Call virDomainFree in cmdDomFSTrim
https://bugzilla.redhat.com/show_bug.cgi?id=928197

The virsh domfstrim command was not freeing allocated domain,
leaving leaked references behind.
2013-04-02 17:36:06 +02:00
Martin Kletzander
11e295705a manual: Fix copy-paste errors
Descriptions for vol-download and vol-upload didn't make much sense.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=923613
2013-04-02 17:06:40 +02:00
Martin Kletzander
d1d2acd7f2 manual: Add info about migrateuri in virsh manual
The virsh(1) man page wasn't saying anything about the 'migrateuri'
parameter other than it can be usually omitted.  A patched version of
docs/migrate.html.in is taken in this patch to fix that up in the man
page.
2013-04-02 17:06:40 +02:00
Peter Krempa
b685a73ed9 virsh-domain: Add --live, --config, --current logic to cmdDetachDisk
Use the established approach to improve this function too.
2013-04-02 16:18:38 +02:00
Peter Krempa
d87f721073 virsh-domain: Add --live, --config, --current logic to cmdDetachDevice
Use the established approach to improve this function too.
2013-04-02 16:18:32 +02:00
Peter Krempa
c3d9f399b5 virsh-domain: Add --live, --config, --current logic to cmdDetachInterface
Use the established approach to improve this function too.
2013-04-02 16:18:05 +02:00
Peter Krempa
69ce3ffa8d virsh: Fix semantics of --config for "update-device" command
The man page states that with --config the next boot is affected. This
can be understood as if _only_ the next boot was affected. This isn't
true if the machine is running.

This patch adds the full --live, --config, --current infrastructure and
tweaks stuff to correctly support the obsolete --persistent flag.

Note that this patch changes the the behavior of the --config flag to match the
use of this flag in rest of libvirt. This flag was mistakenly renamed from
--persistent that originaly had different semantics.
2013-04-02 16:14:14 +02:00
Peter Krempa
cc0cc6b714 virsh-domain: Fix declarations of flag variables in cmdChangeMedia
The parameter options can be declared directly.

Also use macros for mutual exclusion on some of the incompatible
parameter variables.
2013-04-02 16:02:43 +02:00
Peter Krempa
803e467080 virsh-domain: Simplify usage of --current, --live and --config flags
This patch uses the new helper to avoid the more complex check for
domain state modification flags.
2013-04-02 16:02:43 +02:00
Peter Krempa
1f0cac3543 virsh-domain-monitor: Refactor cmdDomIfGetLink
The domif-getlink command did not terminate successfully when the
interface state was found. As the code used old and too complex approach
to do the job, this patch refactors it and fixes the bug.
2013-04-02 15:53:43 +02:00
Peter Krempa
6bd94a1b59 Use virMacAddrFormat instead of manual mac address formatting
Format the address using the helper instead of having similar code in
multiple places.

This patch also fixes leak of the MAC address string in
ebtablesRemoveForwardAllowIn() and ebtablesAddForwardAllowIn() in
src/util/virebtables.c
2013-04-02 15:53:43 +02:00
Peter Krempa
ab4bf20ead util: Change virMacAddrFormat to lowercase hex characters
The domain XML generator creates the mac addres strings with lowercase
strings with a separate piece of code. This patch changes the formating
helper to do the same stuff to allow using it to normalize a string
provided by the user. After this change some of the tests that are
outputing the mac address will need to be changed.
2013-04-02 15:53:43 +02:00
Li Zhang
f84b92ea19 Optimize machine option to set more options with it
Currently, -machine option is used only when dump-guest-core is set.

To use options defined in machine option for newer version of QEMU,
it needs to use -machine xxx, and to be compatible with older version
-M, this patch adds QEMU_CAPS_MACHINE_OPT capability for newer
version which supports -machine option.

Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-04-02 07:02:34 -06:00
Peter Krempa
f8e3221f99 conf: Enforce ranges on cputune variables
The limits are documented at
http://libvirt.org/formatdomain.html#elementsCPUTuning . Enforce them
when going through XML parsing in addition to being enforced by the API.
2013-04-02 14:50:25 +02:00
Michal Privoznik
5e5ca84e31 test: Return Libvirt logo as domain screenshot
This is just a bare Easter Egg. Whenever a user runs virDomainScreenshot
over a domain in test driver, he'll get the Libvirt PNG logo in return.
2013-04-02 14:38:56 +02:00
Eric Blake
6f7e4ea359 smartcard: spell ccid-card-emulated qemu property correctly
Reported by Anthony Messina in
https://bugzilla.redhat.com/show_bug.cgi?id=904692
Present since introduction of smartcard support in commit f5fd9baa

* src/qemu/qemu_command.c (qemuBuildCommandLine): Match qemu spelling.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-host-certificates.args:
Fix broken test.
2013-04-02 06:23:33 -06:00
Ján Tomko
f03dcc5df1 qemu: Allow migration over IPv6
Allow migration over IPv6 by listening on [::] instead of 0.0.0.0
when QEMU supports it (QEMU_CAPS_IPV6_MIGRATION) and there is
at least one v6 address configured on the system.

Use virURIParse in qemuMigrationPrepareDirect to allow parsing
IPv6 addresses, which would cause an 'incorrect :port' error
message before.

Move setting of migrateFrom from qemuMigrationPrepare{Direct,Tunnel}
after domain XML parsing, since we need the QEMU binary path from it
to get its capabilities.

Bug: https://bugzilla.redhat.com/show_bug.cgi?id=846013
2013-04-02 11:23:47 +02:00
Osier Yang
8893df388e virsh: Add a helper to parse cpulist
The 'virsh vcpupin' and 'virsh emulatorpin' commands use the same
code to parse the cpulist. This patch abstracts the same code as
a helper. Along with various code style fixes, and error improvement
(only error "Physical CPU %d doesn't exist" if the specified CPU
exceed the range, no "cpulist: Invalid format", see the following
for an example of the error prior to this patch).

% virsh vcpupin 4 0 0-8
error: Physical CPU 4 doesn't exist.
error: cpulist: Invalid format.
2013-04-02 12:37:24 +08:00
John Ferlan
9a80050e52 Resolve valgrind failure
Code added by commit id '523207fe8'

TEST: qemuxml2argvtest
      ........................................ 40
      ........................................ 80
      ........................................ 120
      ........................................ 160
      ........................................ 200
      ........................................ 240
      .................................        273 OK
==30993== 39 bytes in 1 blocks are definitely lost in loss record 33 of 87
==30993==    at 0x4A0887C: malloc (vg_replace_malloc.c:270)
==30993==    by 0x41E501: fakeSecretGetValue (qemuxml2argvtest.c:33)
==30993==    by 0x427591: qemuBuildDriveURIString (qemu_command.c:2571)
==30993==    by 0x42C502: qemuBuildDriveStr (qemu_command.c:2627)
==30993==    by 0x4335FC: qemuBuildCommandLine (qemu_command.c:6443)
==30993==    by 0x41E8A0: testCompareXMLToArgvHelper (qemuxml2argvtest.c:154
==30993==    by 0x41FE8F: virtTestRun (testutils.c:157)
==30993==    by 0x418BE3: mymain (qemuxml2argvtest.c:506)
==30993==    by 0x4204CA: virtTestMain (testutils.c:719)
==30993==    by 0x38D6821A04: (below main) (in /usr/lib64/libc-2.16.so)
==30993==
==30993== 46 bytes in 1 blocks are definitely lost in loss record 64 of 87
==30993==    at 0x4A0887C: malloc (vg_replace_malloc.c:270)
==30993==    by 0x38D690A167: __vasprintf_chk (in /usr/lib64/libc-2.16.so)
==30993==    by 0x4CB28E7: virVasprintf (stdio2.h:210)
==30993==    by 0x4CB29A3: virAsprintf (virutil.c:2017)
==30993==    by 0x4275B4: qemuBuildDriveURIString (qemu_command.c:2580)
==30993==    by 0x42C502: qemuBuildDriveStr (qemu_command.c:2627)
==30993==    by 0x4335FC: qemuBuildCommandLine (qemu_command.c:6443)
==30993==    by 0x41E8A0: testCompareXMLToArgvHelper (qemuxml2argvtest.c:154
==30993==    by 0x41FE8F: virtTestRun (testutils.c:157)
==30993==    by 0x418BE3: mymain (qemuxml2argvtest.c:506)
==30993==    by 0x4204CA: virtTestMain (testutils.c:719)
==30993==    by 0x38D6821A04: (below main) (in /usr/lib64/libc-2.16.so)
==30993==
==30993== 385 (56 direct, 329 indirect) bytes in 1 blocks are definitely los
==30993==    at 0x4A06B6F: calloc (vg_replace_malloc.c:593)
==30993==    by 0x4C6B2CF: virAllocN (viralloc.c:152)
==30993==    by 0x4C9C7EB: virObjectNew (virobject.c:191)
==30993==    by 0x4D21810: virGetSecret (datatypes.c:642)
==30993==    by 0x41E5D5: fakeSecretLookupByUsage (qemuxml2argvtest.c:51)
==30993==    by 0x4D4BEC5: virSecretLookupByUsage (libvirt.c:15295)
==30993==    by 0x4276A9: qemuBuildDriveURIString (qemu_command.c:2565)
==30993==    by 0x42C502: qemuBuildDriveStr (qemu_command.c:2627)
==30993==    by 0x4335FC: qemuBuildCommandLine (qemu_command.c:6443)
==30993==    by 0x41E8A0: testCompareXMLToArgvHelper (qemuxml2argvtest.c:154
==30993==    by 0x41FE8F: virtTestRun (testutils.c:157)
==30993==    by 0x418BE3: mymain (qemuxml2argvtest.c:506)
==30993==
PASS: qemuxml2argvtest

Interesting side note is that running the test singularly via 'make -C tests
check TESTS=qemuxml2argvtest' didn't trip the valgrind error; however,
running during 'make -C tests valgrind' did cause the error to be seen.
2013-04-01 13:13:31 -04:00
Daniel Veillard
89d730201f Release of libvirt-1.0.4
- configure.ac docs/news.html.in libvirt.spec.in: updates for the release
- po/*.po*: fetch translation updates from Transifex and regenerate
2013-04-01 10:57:04 +08:00
Christophe Fergeau
f81b850911 docs: Fix truncated sentence in RDP 'multiUser' attribute 2013-03-29 13:54:22 +01:00
Ján Tomko
bfb4b82257 virsh: don't call virSecretFree on NULL
Since the refactoring in fbe2d49 we call virSecretFree even if
virSecretDefineXML fails, which leads to overwriting the error
message with:
error: Invalid secret: virSecretFree

Bug: https://bugzilla.redhat.com/show_bug.cgi?id=929045
2013-03-29 13:00:49 +01:00
Martin Kletzander
2d73f2120f storage: Avoid double virCommandFree in virStorageBackendLogicalDeletePool
When logical pool has no PVs associated with itself (user-created),
virCommandFree(cmd) is called twice with the same pointer and that
causes a segfault in daemon.
2013-03-29 11:09:32 +01:00
Ján Tomko
248371417b nodedev: invert virIsCapableFCHost return value
Both virIsCapableFCHost and virIsCapableVport return 0 when the
respective sysfs path is accessible.
2013-03-29 11:32:04 +08:00
Michal Privoznik
a1c68a1fcb security_manager.c: Append seclabel iff generated
With my previous patches, we unconditionally appended a seclabel,
even if it wasn't generated but found in array of defined seclabels.
This resulted in double free later when doing virDomainDefFree
and iterating over the array of defined seclabels.

Moreover, there was another possibility of double free, if the
seclabel was generated in the last iteration of the process of
walking trough security managers array.
2013-03-28 16:13:01 +01:00
Michal Privoznik
0e9df6bd10 virutil: Fix compilation on non-linux platforms
There has been a typo in virIsCapbleVport function name.
2013-03-28 13:23:04 +01:00
Osier Yang
5eeb56fb2a util: Fix the conflict type for virIsCapableFCHost
---
Pushed under build-breaker rule.
2013-03-28 20:17:05 +08:00