Requiring pre-allocation was an unusual idiom. It allowed iteration
over the backing chain to use fewer mallocs, but made one-shot
clients harder to read. Also, this makes it easier for a future
patch to move away from opening fds on every iteration over the chain.
* src/util/storage_file.h (virStorageFileGetMetadataFromFD): Alter
signature.
* src/util/storage_file.c (virStorageFileGetMetadataFromFD): Allocate
return value.
(virStorageFileGetMetadata): Update clients.
* src/conf/domain_conf.c (virDomainDiskDefForeachPath): Likewise.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Likewise.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
Previously, no one was using virStorageFileGetMetadata, and for good
reason - it couldn't support root-squash NFS. Change the signature
and make it useful to future patches, including enhancing the metadata
to recursively track the entire chain.
* src/util/storage_file.h (_virStorageFileMetadata): Add field.
(virStorageFileGetMetadata): Alter signature.
* src/util/storage_file.c (virStorageFileGetMetadata): Rewrite.
(virStorageFileGetMetadataRecurse): New function.
(virStorageFileFreeMetadata): Handle recursion.
Backing chains can end on a network protocol, such as nbd:xxx; we
should not attempt to probe the file system in this case.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Only probe files.
This is the last use of raw strings for disk formats throughout
the src/conf directory.
* src/conf/snapshot_conf.h (_virDomainSnapshotDiskDef): Store enum
rather than string for disk type.
* src/conf/snapshot_conf.c (virDomainSnapshotDiskDefClear)
(virDomainSnapshotDiskDefParseXML, virDomainSnapshotDefFormat):
Adjust users.
* src/qemu/qemu_driver.c (qemuDomainSnapshotDiskPrepare)
(qemuDomainSnapshotCreateSingleDiskActive): Likewise.
Express the default disk type as an enum, for easier handling.
* src/conf/capabilities.h (_virCaps): Store enum rather than
string for disk type.
* src/conf/domain_conf.c (virDomainDiskDefParseXML): Adjust
clients.
* src/qemu/qemu_driver.c (qemuCreateCapabilities): Likewise.
We have historically allowed 'aio' as a synonym for 'raw' for
back-compat to xen, but since a future patch will move to using
an enum value, we have to pick one to be our preferred output
name. This is a slight change in the output XML, but the sexpr
and xm outputs should still be identical, and the input XML can
still use either form.
* src/conf/domain_conf.c (virDomainDiskDefForeachPath): Move aio
back-compat...
(virDomainDiskDefParseXML): ...to parse time.
* src/xenxs/xen_sxpr.c (xenParseSxprDisks, xenFormatSxprDisk): ...and
to output time.
* src/xenxs/xen_xm.c (xenParseXM, xenFormatXMDisk): Likewise.
* tests/sexpr2xmldata/sexpr2xml-*.xml: Update tests.
When an image has no backing file, using VIR_STORAGE_FILE_AUTO
for its type is a bit confusing. Additionally, a future patch
would like to reserve a default value for the case of no file
type specified in the XML, but different from the current use
of -1 to imply probing, since probing is not always safe.
Also, a couple of file types were missing compared to supported
code: libxl supports 'vhd', and qemu supports 'fat' for directories
passed through as a file system.
* src/util/storage_file.h (virStorageFileFormat): Add
VIR_STORAGE_FILE_NONE, VIR_STORAGE_FILE_FAT, VIR_STORAGE_FILE_VHD.
* src/util/storage_file.c (virStorageFileMatchesVersion): Match
documentation when version probing not supported.
(cowGetBackingStore, qcowXGetBackingStore, qcow1GetBackingStore)
(qcow2GetBackingStoreFormat, qedGetBackingStore)
(virStorageFileGetMetadataFromBuf)
(virStorageFileGetMetadataFromFD): Take NONE into account.
* src/conf/domain_conf.c (virDomainDiskDefForeachPath): Likewise.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo): Likewise.
* src/conf/storage_conf.c (virStorageVolumeFormatFromString): New
function.
(poolTypeInfo): Use it.
Relabeling tapfd right after the tap device is created.
qemuPhysIfaceConnect is common function called both for static
netdevs and for hotplug netdevs.
Having hostuuid in migration cookie is a nice bonus since it provides an
easy way of detecting migration to the same host. However, requiring it
breaks backward compatibility with older libvirt releases.
Recently, patches were added support for (managed)saving, restoring, and
migrating domains with host USB devices. However, qemu driver would
still forbid migration of such domains because qemuMigrationIsAllowed
was not updated.
If we can't probe the architecture from QMP we parse the architecture
from the qemu binaries name. This results in the architecture being i386
instead of i686 which then results in QEMU_CAPS_PCI_MULTIBUS being unset
which gives a broken qemu command line.
This probably didn't show up earlier since most of the time there's also
a /usr/bin/qemu around which results in i686 capabilities.
which frees all allocated memory but doesn't set the passed pointer to
NULL. Therefore, we must do it ourselves. This is causing actual
libvirtd crash: Basically, when doing 'virsh net-edit' the newDef should
be dropped. And the memory is freed, indeed. However, the pointer is
not set to NULL but kept instead. And the next duo of calls 'virsh
net-start' and 'virsh net-destroy' starts the disaster. The latter one
does the same as 'virsh destroy'; it sees that newDef is nonNULL so it
replaces def with newDef (which has been freed already as said a few
lines above). Therefore any subsequent call accessing def will hit the ground.
When libvirt cannot find a suitable CPU model for host CPU (easily
reproducible by running libvirt in a guest), it would not provide CPU
topology in capabilities XML either. Even though CPU topology is known
and can be queried by virNodeGetInfo. With this patch, CPU topology will
always be provided in capabilities XML regardless on the presence of CPU
model.
Hypervisors are starting to support HyperV Enlightenment features that
improve behavior of guests running Microsoft Windows operating systems.
This patch adds support for the "relaxed" feature that improves timer
behavior and also establishes a framework to add these features in
future.
Currently we query-spice after the main migration has completed
before moving to next state. Qemu reports this as boolean (not
enclosed within quotes). Therefore it is not correct to use
virJSONValueObjectGetString but virJSONValueObjectGetBoolean instead.
The machine in the last output line of <qemu-binary> -M ?
was always reported as default machine even if this wasn't the
actual default. Trivial fix.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
According to our recent changes (clarifications), we should be pinning
qemu's emulator processes using the <vcpu> 'cpuset' attribute in case
there is no <emulatorpin> specified. This however doesn't work
entirely as expected and this patch should resolve all the remaining
issues.
When p2p migration fails early because qemuMigrationIsAllowed or
qemuMigrationIsSafe say migration should be cancelled, we fail to clear
the migration-out async job. As a result of that, further APIs called
for the same domain may fail with Timed out during operation: cannot
acquire state change lock.
Reported by Guido Winkelmann.
Added support for retrieving the XML defining a specific interface via
the udev based backend to virInterface. Implement the following APIs
for the udev based backend:
* virInterfaceGetXMLDesc()
Note: Does not support bond devices.
There are some descriptions not right in PowerPC CPU model driver.
This patch is to fix them.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Currently, the CPU model driver is not implemented for PowerPC.
Host's CPU information is needed to exposed to guests' XML file some
time.
This patch is to implement the callback functions of CPU model driver.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
CPU version can be got by PVR on PowerPC. So this PVR is defined in
the CPU data in cpuData structure.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
It should relabel tapfd of virtual network of type VIR_DOMAIN_NET_TYPE_DIRECT
rather than VIR_DOMAIN_NET_TYPE_NETWORK and VIR_DOMAIN_NET_TYPE_BRIDGE
(commit ae368ebfcc introduced this bug)
Caution: The context of the two hunks is identical other than indentation.
Please be extremely cautious of where the patch gets applied.
On F17 at least, this command fails:
$ sudo /usr/sbin/lvcreate --name sparsetest -L 0K --virtualsize 16384K vgvirt
Unable to create new logical volume with no extents
Which is unfortunate since allocation=0 is what virt-manager tries to use
by default.
Rather than telling the user 'don't do that', let's just give them the
smallest allocation possible if alloc=0 is requested.
https://bugzilla.redhat.com/show_bug.cgi?id=866481
libvirt started using sanlock_killpath to implement on_lockfailure
action. Since sanlock_killpath was introduced in sanlock 2.4, libvirt
fails to build with older sanlock.
Currently there is a restriction that multi-threaded applications
must manually call virInitialize, before threads start using
libvirt, because it is not thread-safe. By switching it to use
a virOnceControl initializer we gain thread safety, and thus
applications no longer need to manually call it. They can rely
on virConnectOpen invoking it for them.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Win32 platforms don't have SIGKILL defined, but they do have
SIGABRT. Since our virProcess wrapper treats anything which
isn't SIGTERM/SIGINT as equivalent to SIGKILL, just use
SIGABRT on Win32.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add two new APIs virNetServerNewPostExecRestart and
virNetServerPreExecRestart which allow a virNetServerPtr
object to be created from a JSON object and saved to a
JSON object, for the purpose of re-exec'ing a process.
This includes serialization of all registered services
and clients
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add two new APIs virNetServerClientNewPostExecRestart and
virNetServerClientPreExecRestart which allow a virNetServerClientPtr
object to be created from a JSON object and saved to a
JSON object, for the purpose of re-exec'ing a process.
This includes serialization of the connected socket associated
with the client
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add two new APIs virNetServerServiceNewPostExecRestart and
virNetServerServicePreExecRestart which allow a virNetServerServicePtr
object to be created from a JSON object and saved to a
JSON object, for the purpose of re-exec'ing a process.
This includes serialization of the listening sockets associated
with the service
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add two new APIs virNetSocketNewPostExecRestart and
virNetSocketPreExecRestart which allow a virNetSocketPtr
object to be created from a JSON object and saved to a
JSON object, for the purpose of re-exec'ing a process.
As well as saving the state in JSON format, the second
method will disable the O_CLOEXEC flag so that the open
file descriptors are preserved across the process re-exec()
Since it is not possible to serialize SASL or TLS encryption
state, an error will be raised if attempting to perform
serialization on non-raw sockets
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add two new APIs virLockSpaceNewPostExecRestart and
virLockSpacePreExecRestart which allow a virLockSpacePtr
object to be created from a JSON object and saved to a
JSON object, for the purposes of re-exec'ing a process.
As well as saving the state in JSON format, the second
method will disable the O_CLOEXEC flag so that the open
file descriptors are preserved across the process re-exec()
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The previously introduced virFile{Lock,Unlock} APIs provide a
way to acquire/release fcntl() locks on individual files. For
unknown reason though, the POSIX spec says that fcntl() locks
are released when *any* file handle referring to the same path
is closed. In the following sequence
threadA: fd1 = open("foo")
threadB: fd2 = open("foo")
threadA: virFileLock(fd1)
threadB: virFileLock(fd2)
threadB: close(fd2)
you'd expect threadA to come out holding a lock on 'foo', and
indeed it does hold a lock for a very short time. Unfortunately
when threadB does close(fd2) this releases the lock associated
with fd1. For the current libvirt use case for virFileLock -
pidfiles - this doesn't matter since the lock is acquired
at startup while single threaded an never released until
exit.
To provide a more generally useful API though, it is necessary
to introduce a slightly higher level abstraction, which is to
be referred to as a "lockspace". This is to be provided by
a virLockSpacePtr object in src/util/virlockspace.{c,h}. The
core idea is that the lockspace keeps track of what files are
already open+locked. This means that when a 2nd thread comes
along and tries to acquire a lock, it doesn't end up opening
and closing a new FD. The lockspace just checks the current
list of held locks and immediately returns VIR_ERR_RESOURCE_BUSY.
NB, the API as it stands is designed on the basis that the
files being locked are not being otherwise opened and used
by the application code. One approach to using this API is to
acquire locks based on a hash of the filepath.
eg to lock /var/lib/libvirt/images/foo.img the application
might do
virLockSpacePtr lockspace = virLockSpaceNew("/var/lib/libvirt/imagelocks");
lockname = md5sum("/var/lib/libvirt/images/foo.img");
virLockSpaceAcquireLock(lockspace, lockname);
NB, in this example, the caller should ensure that the path
is canonicalized before calculating the checksum.
It is also possible to do locks directly on resources by
using a NULL lockspace directory and then using the file
path as the lock name eg
virLockSpacePtr lockspace = virLockSpaceNew(NULL);
virLockSpaceAcquireLock(lockspace, "/var/lib/libvirt/images/foo.img");
This is only safe to do though if no other part of the process
will be opening the files. This will be the case when this
code is used inside the soon-to-be-reposted virlockd daemon
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Given Daniel's announcement[1], code targetting the next release will
be in 1.0.0, not 0.10.3. Changed mechanically with:
for f in $(git grep -l '0\(.\)10\13\b') ; do
sed -i -e 's/0\(.\)10\13/1\10\10/g' $f
done
[1]https://www.redhat.com/archives/libvir-list/2012-October/msg00403.html
* docs/formatdomain.html.in: Use 1.0.0 for next release.
* src/interface/interface_backend_udev.c: Likewise.
There was a crash possible when both <boot dev... and <boot
order... were specified due to virDomainDefParseBootXML() erroring out
before setting *tmp (which was free'd in cleanup). As a fix, I
created this cleanup that uses one pointer for all the temporary
stored XPath strings and values, plus this pointer is correctly
initialized to NULL.
BZ:https://bugzilla.redhat.com/show_bug.cgi?id=851981
When using macvtap, a character device gets first created by
kernel with name /dev/tapN, its selinux context is:
system_u:object_r:device_t:s0
Shortly, when udev gets notification when new file is created
in /dev, it will then jump in and relabel this file back to the
expected default context:
system_u:object_r:tun_tap_device_t:s0
There is a time gap happened.
Sometimes, it will have migration failed, AVC error message:
type=AVC msg=audit(1349858424.233:42507): avc: denied { read write } for
pid=19926 comm="qemu-kvm" path="/dev/tap33" dev=devtmpfs ino=131524
scontext=unconfined_u:system_r:svirt_t:s0:c598,c908
tcontext=system_u:object_r:device_t:s0 tclass=chr_file
This patch will label the tapfd device before qemu process starts:
system_u:object_r:tun_tap_device_t:MCS(MCS from seclabel->label)
This patch adds support for SUSPEND_DISK event; both lifecycle and
separated. The support is added for QEMU, machines are changed to
PMSUSPENDED, but as QEMU sends SHUTDOWN afterwards, the state changes
to shut-off. This and much more needs to be done in order for libvirt
to work with transient devices, wake-ups etc. This patch is not
aiming for that functionality.
Commit e8fd8757c8 changed 'const char *'
category to virLogSource enum. This changes it in virLogEatParams as
well, thus fixing the build with --disable-debug.
--
Hopefully moving the enum declarations is less ugly than using int.
Upstream kernel introduced new sysfs knob "merge_across_nodes" to
specify if pages from different numa nodes can be merged. When set
to 0, only pages which physically reside in the memory area of
same NUMA node can be merged. When set to 1, pages from all nodes
can be merged.
This patch supports the tuning by adding new param field
"shm_merge_across_nodes".
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=805071
to the extent that it can be resolved with current qemu functionality.
It attempts to detect as many situations as possible when the simple
operation of disconnecting an existing tap device from one bridge and
attaching it to another will satisfy the change requested in
virDomainUpdateDeviceFlags() for a network device. Before this patch,
that situation could only be detected if the pre-change interface
*and* the post-change interface definition were both "type='bridge'".
After this patch, it can also be detected if the before or after
interfaces are any combination of type='bridge' and type='network'
(the networks can be <forward mode='nat|route|bridge'>, as long as
they use a Linux host bridge and not macvtap connections).
This extra effort is especially useful since the recent discovery that
a netdev_del+netdev_add combo (to reconnect the network device with
completely different hostside configuration) doesn't work properly
with current qemu (1.2) unless it is accompanied by the matching
device_del+device_add - see this mailing list message for details:
http://lists.nongnu.org/archive/html/qemu-devel/2012-10/msg02355.html
(A slight modification of the patch referenced there has been prepared
to apply on top of this patch, but won't be pushed until qemu can be
made to work with it.)
* qemuDomainChangeNet needs access to the virDomainDeviceDef that
holds the new netdef (so that it can clear out the virDomainDeviceDef
if it ends up using the NetDef to replace the original), so the
virDomainNetDefPtr arg is replaced with a virDomainDeviceDefPtr.
* qemuDomainChangeNet previously checked for *some* changes to the
interface config, but this check was by no means complete. It was also
a bit disorganized.
This refactoring of the code is (I believe) complete in its check of
all NetDef attributes that might be changed, and either returns a
failure (for changes that are simply impossible), or sets one of three
flags:
needLinkStateChange - if the device link state needs to go up/down
needBridgeChange - if everything else is the same, but it needs
to be connected to a difference linux host
bridge
needReconnect - if the entire host side of the device needs
to be torn down and reconstructed (currently
non-working, as mentioned above)
Note that this function will refuse to make any change that requires
the *guest* side of the device to be detached (e.g. changing the PCI
address or mac address). Those would be disruptive enough to the guest
that it's reasonable to require an explicit detach/attach sequence
from the management application.
* As mentioned above, qemuDomainChangeNet also does its best to
understand when a simple change in attached bridge for the existing
tap device will work vs. the need to completely tear down/reconstruct
the host side of the device (including tap device).
This patch *does not* implement the "reconnect" code anyway - there is
a placeholder that turns that into an error. Rather, the purpose of
this patch is to replicate existing behavior with code that is ready
to have that functionality plugged in in a later patch.
* The expanded uses for qemuDomainChangeNetBridge meant that it needed
to be enhanced as well - it no longer replaces the original brname
string in olddev with the new brname; instead, it relies on the
caller to replace the *entire* olddev with newdev (since we've gone
to great lengths to assure they are functionally identical other
than the name of the bridge, this is now not only safe, but more
correct). Additionally, qemuDomainNetChangeBridge can now set the
bridge for type='network' interfaces as well as plain type='bridge'
interfaces. (Note that I had to make this change simultaneous to the
reorganization of qemuDomainChangeNet because the two are too
closely intertwined to separate).
This function really should have been taking virDevicePCIAddress*
instead of the inefficient virDevicePCIAddress (results in copying two
entire structs onto the stack rather than just two pointers), and
returning a bool true/false (not matching is not necessarily a
"failure", as a -1 return would imply, and also using "if
(!virDevicePCIAddressEqual(x, y))" to mean "if x == y" is just a bit
counterintuitive).
When vcpu placement is "auto", the domain process will be pinned
to advisory nodeset from querying numad, While emulatorpin will
override the pinning. That means both of them are to set the
pinning policy for domain process, but conflicts with each other.
This patch ingore emulatorpin if vcpu placement is "auto", because
<vcpu> placement can't be simply ignored for <numatune> placement
could default to it.
The onlined vcpu pinning policy should inherit def->cpuset if
it's not specified explicitly, and the affinity should be set
in this case. Oppositely, the offlined vcpu pinning policy should
be free()'ed.
Various APIs use cgroup to either set or get the statistics of
host or guest. Hotplug or hot unplug new vcpus without creating
or removing the cgroup for the vcpus could cause problems for
those APIs. E.g.
% virsh vcpucount dom
maximum config 10
maximum live 10
current config 1
current live 1
% virsh setvcpu dom 2
% virsh schedinfo dom --set vcpu_quota=1000
Scheduler : posix
error: Unable to find vcpu cgroup for rhel6.2(vcpu: 1): No such file or
directory
This patch fixes the problem by creating cgroups for each of the
onlined vcpus, and destroying cgroups for each of the offlined
vcpus.
Document for <vcpu>'s "cpuset" says:
Since 0.4.4, this element can contain an optional cpuset attribute,
which is a comma-separated list of physical CPU numbers that virtual
CPUs can be pinned to.
However, it's not the truth, libvirt actually pins the domain
process to the specified pCPUs by "cpuset" of <vcpu>. And the
vcpu thread are pinned to all available pCPUs if no <vcpupin>
is specified for it.
This patch is to implement the codes to inherit <vcpu>'s "cpuset" for
vcpu that doesn't have <vcpupin> specified, and <vcpupin>
for these vcpu will be ignored when formating. Underlying
driver implementation will make sure the vcpu thread pinned
to correct pCPUs.
Setting pinning policy for vcpu which exceeds current vcpus number
just makes no sense, however, it could cause various problems, E.g.
<vcpu current='1'>4</vcpu>
<cputune>
<vcpupin vcpuid='3' cpuset='4'/>
</cputune>
% virsh start linux
error: Failed to start domain linux
error: cannot set CPU affinity on process 32534: No such process
We must have some odd codes underlying which produces the
"on process 32534", but the point is why we not to prevent
earlier when parsing? Note that this is only one of the
problem it could cause.
This patch is to ignore the <vcpupin> for not onlined vcpus.
We are currently able to work only with non-translated SELinux
contexts, but we are using functions that work with translated
contexts throughout the code. This patch swaps all SELinux context
translation relative calls with their raw sisters to avoid parsing
problems.
The problems can be experienced with mcstrans for example. The
difference is that if you have translations enabled (yum install
mcstrans; service mcstrans start), fgetfilecon_raw() will get you
something like 'system_u:object_r:virt_image_t:s0', whereas
fgetfilecon() will return 'system_u:object_r:virt_image_t:SystemLow'
that we cannot parse.
I was trying to confirm that the _raw variants were here since the dawn of
time, but the only thing I see now is that it was imported together in
the upstream repo [1] from svn, so before 2008.
Thanks Laurent Bigonville for finding this out.
[1] http://oss.tresys.com/git/selinux.git
When startupPolicy set for a USB devices allows such device to be
missing, there was no way this could be detected from domain XML. With
this patch, libvirt emits a new missing='yes' attribute for such devices
when active domain XML is generated.
The comment stated that you may call qemuDomainObjBeginJobWithDriver
without passing qemud_driver to signal it's not locked.
qemuDomainObjBeginJobWithDriver still accesses the qemud_driver
structure and the lock singaling is done through a separate parameter.
Save/restore with passed through USB devices currently only works if the
USB device can be found at the same USB address where it used to be
before saving a domain. This makes sense in case a user explicitly
configure the USB address in domain XML. However, if the device was
found automatically by vendor/product identification, we should try to
search for that device when restoring the domain and use any device we
find as long as there is only one available. In other words, the USB
device can now be removed and plugged again or the host can be rebooted
between saving and restoring the domain.
Using VIR_DOMAIN_XML_MIGRATABLE flag, one can request domain's XML
configuration that is suitable for migration or save/restore. Such XML
may contain extra run-time stuff internal to libvirt and some default
configuration may be removed for better compatibility of the XML with
older libvirt releases.
This flag may serve as an easy way to get the XML that can be passed
(after desired modifications) to APIs that accept custom XMLs, such as
virDomainMigrate{,ToURI}2 or virDomainSaveFlags.
All USB device lookup functions emit an error when they cannot find the
requested device. With this patch, their caller can choose if a missing
device is an error or normal condition.
The code which looks up a USB device specified by hostdev is duplicated
in two places. This patch creates a dedicated function that can be
called in both places.
USB devices can disappear without OS being mad about it, which makes
them ideal for startupPolicy. With this attribute, USB devices can be
configured to be mandatory (the default), requisite (will disappear
during migration if they cannot be found), or completely optional.
While the changes to sanlock driver should be stable, the actual
implementation of sanlock_helper is supposed to be replaced in the
future. However, before we can implement a better sanlock_helper, we
need an administrative interface to libvirtd so that the helper can just
pass a "leases lost" event to the particular libvirt driver and
everything else will be taken care of internally. This approach will
also allow libvirt to pass such event to applications and use
appropriate reasons when changing domain states.
The temporary implementation handles all actions directly by calling
appropriate libvirt APIs (which among other things means that it needs
to know the credentials required to connect to libvirtd).
While current on_{poweroff,reboot,crash} action configuration is about
configuring life cycle actions, they can all be considered events and
actions that need to be done on a particular event. Let's generalize the
code by renaming life cycle actions to event actions so that it can be
reused later for non-lifecycle events.
Done with:
sed -i -e "s/no pool with matching uuid/no storage pool with matching uuid/g" src/storage/storage_driver.c
sed -i -e 's/"%s", _("no storage pool with matching uuid")/_("no storage pool with matching uuid %s"), obj->uuid/g' src/storage/storage_driver.c
sed -i -e 's/"%s", _("storage pool is not active")/_("storage pool '%s' is not active"), pool->def->name/g' src/storage/storage_driver.c
And a couple fixups before, during, and after, and a manual inspection
pass to make sure nothing was wonky.
When adding variants of parameter setting APIs which accepted
flags, the existing APIs were all adapted internally to pass
VIR_DOMAIN_AFFECT_CURRENT to the new API. The QEMU impl
qemuSetSchedularParameters was an exception, which instead
used VIR_DOMAIN_AFFECT_LIVE. Change this to match other
compatibility scenarios, so that calling
virDomainSetSchedularParameters(dom, params, nparams);
Has the same semantics as
virDomainSetSchedularParametersFlags(dom, params, nparams, 0);
And
virDomainSetSchedularParametersFlags(dom, params, nparams, VIR_DOMAIN_AFFECT_CURRENT);
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently virNetSocketNew fails because virSetCloseExec fails as there
is no proper implementation for it on Windows at the moment. Workaround
this by pretending that setting close-on-exec on the fd works. This can
be done because libvirt currently lacks the ability to create child
processes on Windows anyway. So there is no point in failing to set a
flag that isn't useful at the moment anyway.
Traverse the whole inheritance hierarchy for dynamic dispatch as it is
already done for the dynamic cast.
Also make AnyType cast errors more verbose.
Reported by Ata Bohra.
Add support to check if a specific interface is active by supporting the
following API function in the udev based virInterface backend:
* virConnectInterfaceIsActive()
All other backends for virInterface or other HVs implementations of
virInterface list their own names for the name instead of the generic
'Interface' value. This does the same for the netcf based backend.
Also, report any errors during registration.
Add a read-only udev based backend for virInterface. Useful for distros
that do not have netcf support yet. Multiple libvirt based utilities use
a HAL based fallback when virInterface is not available which is less
than ideal. This implements:
* virConnectNumOfInterfaces()
* virConnectListInterfaces()
* virConnectNumOfDefinedInterfaces()
* virConnectListDefinedInterfaces()
* virConnectListAllInterfaces()
* virConnectInterfaceLookupByName()
* virConnectInterfaceLookupByMACString()
The code was reporting raw exit status without decoding it into
normal vs. signal exit. virCommandRun already does this, but
with a different error type, so all we have to do is recast
the error to the correct type.
Reported by li guang.
* src/util/hooks.c (virHookCall): Simplify.
As a side effect of changes in the functions virGetUserID and
virGetGroupID, the user and group configurations for DAC in qemu.conf
are now able to accept both names and IDs, supporting a leading plus
sign to ensure that a numeric value will not be interpreted as a name.
This patch updates the comments in qemu.conf, including a description of
this new behavior.
With the recent introduction of QMP capabilities probing, libvirt failed
to detect support for QXL graphics in QEMU 1.2 and newer. In addition to
fixing that, this patch also causes libvirt to detect QXL support for
qemu-kvm-0.13.0, which doesn't advertise it in -help output but mentions
it in device list. Since qemu-kvm-0.13.0 supported -spice, it looks like
not having qxl in -help was a bug.
The functions virGetUserID and virGetGroupID are now able to parse
user/group names and IDs in a similar way to coreutils' chown. So, user
and group parsing in security_dac can be simplified.
This patch updates virGetUserID and virGetGroupID to be able to parse a
user or group name in a similar way to coreutils' chown. This means that
a numeric value with a leading plus sign is always parsed as an ID,
otherwise the functions try to parse the input first as a user or group
name and if this fails they try to parse it as an ID.
This patch includes Peter Krempa's changes to correctly handle errors
returned by getpwnam_r and getgrnam_r.
curl_global_init is not thread-safe. curl_easy_init might call
curl_global_init when it was no called before. But curl_easy_init
can be called from different threads by the ESX driver. Therefore,
call curl_global_init from virInitialize to stop curl_easy_init from
calling it.
Reported by Benjamin Wang.
When both kvmclock and kvm_pv_eoi are configured (either disabled or
enabled) libvirt will generate invalid CPU specification due to the
fact that even though kvmclock causes the CPU to be specified, it
doesn't set have_cpu flag to true (and the new kvm_pv_eoi as well).
This patch fixes the issue and adds a test exactly for that to show
that it is fixed correctly (and also to keep it that way in the future
of course).
libcurl uses a SIGALRM in combination with sigsetjmp/siglongjmp to be
able to abort a DNS lookup when it takes too long. The problem with this
in a multi-threaded application is that the signal handler for SIGALRM
and the call to siglongjmp can be executed on a thread that is different
from the one that initially did the SIGALRM setup and the call to
sigsetjmp. In the reported case this triggered a segfault.
Disable libcurl's use of signals to avoid this situation. This has the
disadvantage of losing the ability to abort synchronous DNS lookups which
might result in libcurl getting stuck in a DNS lookup in the worst case.
When libcurl was build with an asynchronous DNS backend such as c-ares
then there is no problem because the timeout mechanism works without
signals here anyway.
Reported by Benjamin Wang.
The output buffer for virFileReadAll was too small for systems with
more than 30 CPUs which leads to a log entry and incorrect behavior.
The new size will be sufficient for the current
architectural limits.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This reverts part of commit 5468594f465; the perl changes in that
patch were sufficient. Since libvirt.syms is already a generated
file created in part from libvirt_private.syms, we don't need a
second pass over libvirt_private.syms in isolation.
* src/Makefile.am: Undo addition of check-private-symfile.
Currently, we are checking if libvirt.so contains public symbols.
However, sometimes we rename an internal symbol and forget to
change libvirt_private.syms accordingly. Hence, it's safer to check
for internal symbols as well.
Correct the check for the return value of virStrcpyStatic()
when copying port-profile names. Fixes Open vSwitch ports
which utilize port-profiles from network definitions.
Signed-off-by: Kyle Mestery <kmestery@cisco.com>
The DAC driver is missing parsing of group and user names for DAC labels
and currently just parses uid and gid. This patch extends it to support
names, so the following security label definition is now valid:
<seclabel type='static' model='dac' relabel='yes'>
<label>qemu:qemu</label>
<imagelabel>qemu:qemu</imagelabel>
</seclabel>
When it tries to parse an owner or a group, it first tries to resolve it as
a name, if it fails or it's an invalid user/group name then it tries to
parse it as an UID or GID. A leading '+' can also be used for both owner and
group to force it to be parsed as IDs, so the following example is also
valid:
<seclabel type='static' model='dac' relabel='yes'>
<label>+101:+101</label>
<imagelabel>+101:+101</imagelabel>
</seclabel>
This ensures that UID 101 and GUI 101 will be used instead of an user or
group named "101".
Introduced in commit 0caccb58.
CC libvirt_driver_qemu_impl_la-qemu_capabilities.lo
../../src/qemu/qemu_capabilities.c: In function 'qemuCapsInitQMP':
../../src/qemu/qemu_capabilities.c:2327:13: error: format '%d' expects argument of type 'int', but argument 8 has type 'const char *' [-Werror=format]
* src/qemu/qemu_capabilities.c (qemuCapsInitQMP): Use correct format.
Since libvirt switched to QMP capabilities probing recently, it starts
QEMU process used for this probing with -daemonize, which means
virCommandAbort can no longer reach these processes. As a result of
that, restarting libvirtd will leave several new QEMU processes behind.
Let's use QEMU's -pidfile and use it to kill the process when QMP caps
probing is done.
When doing snapshots, the filesystem freeze function used the agent
entering function that expects the qemud_driver unlocked. This might
cause a deadlock of the qemu driver if the agent does not respond.
The only call path of this function has the qemud_driver locked, so this
patch changes the entering functions to those expecting the driver
locked.
There was an inverted return value in lxcCgroupControllerActive().
The function assumes cgroups are active and do couple of checks
to prove that. If any of them fails, false is returned. Therefore,
at the end, after all checks are done we must return true, not false.
Commit f6430390 broke builds on RHEL 5, where glibc (2.5) is too
old to support mkostemp (2.7) or htole64 (2.9). While gnulib
has mkostemp, it still lacks htole64; and it's not worth dragging
in replacements on systems where journald is unlikely to exist
in the first place, so we just use an extra configure-time check
as our witness of whether to attempt compiling the code.
* src/util/logging.c (virLogParseOutputs): Don't attempt to
compile journald on older glibc.
* configure.ac (AC_CHECK_DECLS): Check for htole64.
Use MATCH for all flags checks.
hypervMsvmComputerSystemToDomain expects the domain pointer to the
initialized to NULL.
All items in doms up to the count-th one are valid, no need to double
check before freeing them.
Avoid requesting information such as identity or power state when it
is not necessary.
Lookup virtual machine list with the required fields (configStatus,
name, and config.uuid) to make esxVI_GetVirtualMachineIdentity work.
No need to call esxVI_GetNumberOfSnapshotTrees. rootSnapshotTreeList
can be tested for emptiness by checking it for NULL.
esxVI_LookupRootSnapshotTreeList already does the error reporting,
don't overwrite it.
Check if autostart is enabled at all before looking up the individual
autostart setting of a virtual machine.
Reorder VIR_EXPAND_N(doms, ndoms, 1) to avoid leaking the result of
the call to virGetDomain if VIR_EXPAND_N fails.
Replace VIR_EXPAND_N by VIR_RESIZE_N to avoid quadratic scaling, as in
the Hyper-V version of the function.
If virGetDomain fails it already reports an error, don't overwrite it
with an OOM error.
All items in doms up to the count-th one are valid, no need to double
check before freeing them.
Finally, don't leak autoStartDefaults and powerInfoList.
Start a QEMU process using
$QEMU -S -no-user-config -nodefaults \
-nographic -M none -qmp unix:/some/path,server,nowait
and talk QMP over stdio to discover what capabilities the
binary supports. This works for QEMU 1.2.0 or later and
for older QEMU automatically fallback to the old approach
of parsing -help and related command line args.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some architectures provide the query-cpu-definitions command,
but are set to always return a "GenericError" from it :-(
Catch this & treat it as if there was an empty list of CPUs
returned
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
After calling qemuMonitorClose(), it is still possible for
the QEMU monitor I/O event callback to get invoked. This
will trigger an error message because mon->fd has been set
to -1 at this point. Silently ignore the case where mon->fd
is -1, likewise for mon->watch being zero.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qemuMonitorOpen method only needs a virDomainObjPtr in order
to access the QEMU pid. This is not critical when detecting the
QEMU capabilties, so can easily be skipped
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The help output for QEMU 1.2.0 changed 'pci-assign' to 'kvm-pci-assign'.
Since the new capabilities code does exact device name matching
instead of substring matching, this caused the capabilities to go
missing.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add support for logging to the systemd journal, using its
simple client library. The benefit over syslog is that it
accepts structured log data, so the journald can store
individual items like code file/line/func separately from
the string message. Tools which require structured log
data can then query the journal to extract exactly what
they desire without resorting to string parsing
While systemd provides a simple client library for logging,
it is more convenient for libvirt to directly write its
own client code. This lets us build up the iovec's on
the stack, avoiding the need to alloc memory when writing
log messages.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the qemuCapsParseDeviceStr method has a bunch of open
coded string searches/comparisons to detect devices and their
properties. Soon this data will be obtained from QMP queries
instead of -device help output. Maintaining the list of device
and properties in two places is undesirable. Thus the existing
qemuCapsParseDeviceStr() method needs to be refactored to
separate the device types and properties from the actual
search code.
Thus the -device help output is now parsed to construct a
list of device names, and device properties. These are then
checked against a set of datatables to set the capability
flags
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'const char *category' parameter only has a few possible
values now that the filename has been separated. Turn this
parameter into an enum instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the logging APIs have a 'const char *category' parameter
which indicates where the log message comes from. This is typically
a combination of the __FILE__ string and other prefix. Split the
__FILE__ off into a dedicated parameter so it can passed to the
log outputs
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
General whitespace cleanup in the logging files
- Move '{' to a new line after funtion declaration
- Put each parameter on a new line to avoid long lines
- Put return type on new line
- Leave 2 blank lines between functions
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The log destinations are an enum, but most of the code was
just using a plain 'int' for function params / variables.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The __LINE__ macro value is specified to fit in the size_t
type, so use that instead of 'long long' in the logging code
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The log priority levels are an enum, but most of the code was
just using a plain 'int' for function params / variables.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
I hit this problem recently when trying to create a bridge with an IPv6
address on a 3.2 kernel: dnsmasq (and, further, radvd) would not bind to
the given address, waiting 20s and then giving up with -EADDRNOTAVAIL
(resp. exiting immediately with "error parsing or activating the config
file", without libvirt noticing it, BTW). This can be reproduced with (I
think) any kernel >= 2.6.39 and the following XML (to be used with
"virsh net-create"):
<network>
<name>test-bridge</name>
<bridge name='testbr0' />
<ip family='ipv6' address='fd00::1' prefix='64'>
</ip>
</network>
(it happens even when you have an IPv4, too)
The problem is that since commit [1] (which, ironically, was made to
“help IPv6 autoconfiguration”) the linux bridge code makes bridges
behave like “real” devices regarding carrier detection. This makes the
bridges created by libvirt, which are started without any up devices,
stay with the NO-CARRIER flag set, and thus prevents DAD (Duplicate
address detection) from happening, thus letting the IPv6 address flagged
as “tentative”. Such addresses cannot be bound to (see RFC 2462), so
dnsmasq fails binding to it (for radvd, it detects that "interface XXX
is not RUNNING", thus that "interface XXX does not exist, ignoring the
interface" (sic)). It seems that this behavior was enhanced somehow with
commit [2] by avoiding setting NO-CARRIER on empty bridges, but I
couldn't reproduce this behavior on my kernel. Anyway, with the “dummy
tap to set MAC address” trick, this wouldn't work.
To fix this, the idea is to get the bridge's attached device to be up so
that DAD can happen (deactivating DAD altogether is not a good idea, I
think). Currently, libvirt creates a dummy TAP device to set the MAC
address of the bridge, keeping it down. But even if we set this device
up, it is not RUNNING as soon as the tap file descriptor attached to it
is closed, thus still preventing DAD. So, we must modify the API a bit,
so that we can get the fd, keep the tap device persistent, run the
daemons, and close it after DAD has taken place. After that, the bridge
will be flagged NO-CARRIER again, but the daemons will be running, even
if not happy about the device's state (but we don't really care about
the bridge's daemons doing anything when no up interface is connected to
it).
Other solutions that I envisioned were:
* Keeping the *-nic interface up: this would waste an fd for each
bridge during all its life. May be acceptable, I don't really
know.
* Stop using the dummy tap trick, and set the MAC address directly
on the bridge: it is possible since quite some time it seems,
even if then there is the problem of the bridge not being
RUNNING when empty, contrary to what [2] says, so this will need
fixing (and this fix only happened in 3.1, so it wouldn't work
for 2.6.39)
* Using the --interface option of dnsmasq, but I saw somewhere
that it's not used by libvirt for backward compatibility. I am
not sure this would solve this problem, though, as I don't know
how dnsmasq binds itself to it with this option.
This is why this patch does what's described earlier.
This patch also makes radvd start even if the interface is
“missing” (i.e. it is not RUNNING), as it daemonizes before binding to
it, and thus sometimes does it after the interface has been brought down
by us (by closing the tap fd), and then originally stops. This also
makes it stop yelling about it in the logs when the interface is down at
a later time.
[1]
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=1faa4356a3bd89ea11fb92752d897cff3a20ec0e
[2]
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=b64b73d7d0c480f75684519c6134e79d50c1b341
If QEMU reports CommandNotFound for the 'query-events' command,
we must treat that as success, returning a zero-length array
of events
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In Xen 4.2, xs.h is deprecated in favor of xenstore.h. xs.h now
contains
#warning xs.h is deprecated use xenstore.h instead
#include <xenstore.h>
which fails compilation when warnings are treated as errors.
Introduce a configure-time check for xenstore.h and if found,
use it instead of xs.h.
In addition to the preformatted text line, pass the raw message as well,
to allow the output functions to use a different output format.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Allow for the code converting from libvirt log levels to syslog
log levels to be reused.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qemuMonitorSetCapabilities() API is used to initialize the QMP
protocol capabilities. It has since been abused to initialize some
libvirt internal capabilities based on command/event existance too.
Move the latter code out into qemuCapsProbeQMP() in the QEMU
capabilities source file instead
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qemu monitor does not require qemu_conf.h, and the
qemu capabilities code actually wants bitmap.h
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new qemuMonitorGetTargetArch() method to support invocation
of the 'query-target' JSON monitor command. No HMP equivalent
is required, since this will only be present for QEMU >= 1.2
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new qemuMonitorGetObjectProps() method to support invocation
of the 'device-list-properties' JSON monitor command. No HMP equivalent
is required, since this will only be present for QEMU >= 1.2
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new qemuMonitorGetObjectTypes() method to support invocation
of the 'qom-list-types' JSON monitor command. No HMP equivalent
is required, since this will only be present for QEMU >= 1.2
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new qemuMonitorGetEvents() method to support invocation
of the 'query-events' JSON monitor command. No HMP equivalent
is required, since this will only be used when JSON is available
The existing qemuMonitorJSONCheckEvents() method is refactored
to use this new method
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new qemuMonitorGetCPUCommands() method to support invocation
of the 'query-commands' JSON monitor command. No HMP equivalent
is required, since this will only be used when JSON is available
The existing qemuMonitorJSONCheckCommands() method is refactored
to use this new method
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new qemuMonitorGetCPUDefinitions() method to support invocation
of the 'query-cpu-definitions' JSON monitor command. No HMP equivalent
is required, since this will only be present for QEMU >= 1.2
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new qemuMonitorGetMachines() method to support invocation
of the 'query-machines' JSON monitor command. No HMP equivalent
is required, since this will only be present for QEMU >= 1.2
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a new qemuMonitorGetVersion() method to support invocation
of the 'query-version' JSON monitor command. No HMP equivalent
is provided, since this will only be used for QEMU >= 1.2
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qemuCapsProbeMachineTypes & qemuCapsProbeCPUModels methods
do not need to be invoked directly anymore. Make them static
and refactor them to directly populate the qemuCapsPtr object
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When launching a QEMU guest the binary is probed to discover
the list of supported CPU names. Remove this probing with a
simple lookup of CPU models in the qemuCapsPtr object. This
avoids another invocation of the QEMU binary during the
startup path.
As a nice benefit we can now remove all the nasty hacks from
the test suite which were done to avoid having to exec QEMU
on the test system. The building of the -cpu command line
can just rely on data we pre-populate in qemuCapsPtr.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When XML for a new guest is received, the machine type is
immediately canonicalized into the version specific name.
This involves probing QEMU for supported machine types.
Replace this probing with a lookup of the machine types
in the (hopefully cached) qemuCapsPtr object
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove all use of the existing APIs for querying QEMU
capability flags. Instead obtain a qemuCapsPtr object
from the global cache. This avoids the execution of
'qemu -help' (and related commands) when launching new
guests.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When building up a virCapsPtr instance, the QEMU driver
was copying the list of machine types across from the
previous virCapsPtr instance, if the QEMU binary had not
changed. Replace this ad-hoc caching of data with use
of the new qemuCapsCache global cache.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce a qemuCapsCachePtr object to provide a global cache
of capabilities for QEMU binaries. The cache auto-populates
on first request for capabilities about a binary, and will
auto-refresh if the binary has changed since a previous cache
was populated
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
For historical compat we use 'itanium' as the arch name, so
if the QEMU binary suffix is 'ia64' we need to translate it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the qemuAgentClose method is called from a place which holds
the domain lock, it is theoretically possible to get a deadlock
in the agent destroy callback. This has not been observed, but
the equivalent code in the QEMU monitor destroy callback has seen
a deadlock.
Remove the redundant locking while unrefing the object and the
bogus assignment
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Many parts of virDomainDefPtr were using 'int' variables as
array length counts. Replace all these with size_t and update
various format strings & API signatures to adapt
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some users report (very rarely) seeing a deadlock in the QEMU
monitor callbacks
Thread 10 (Thread 0x7fcd11e20700 (LWP 26753)):
#0 0x00000030d0e0de4d in __lll_lock_wait () from /lib64/libpthread.so.0
#1 0x00000030d0e09ca6 in _L_lock_840 () from /lib64/libpthread.so.0
#2 0x00000030d0e09ba8 in pthread_mutex_lock () from /lib64/libpthread.so.0
#3 0x00007fcd162f416d in virMutexLock (m=<optimized out>)
at util/threads-pthread.c:85
#4 0x00007fcd1632c651 in virDomainObjLock (obj=<optimized out>)
at conf/domain_conf.c:14256
#5 0x00007fcd0daf05cc in qemuProcessHandleMonitorDestroy (mon=0x7fcccc0029e0,
vm=0x7fcccc00a850) at qemu/qemu_process.c:1026
#6 0x00007fcd0db01710 in qemuMonitorDispose (obj=0x7fcccc0029e0)
at qemu/qemu_monitor.c:249
#7 0x00007fcd162fd4e3 in virObjectUnref (anyobj=<optimized out>)
at util/virobject.c:139
#8 0x00007fcd0db027a9 in qemuMonitorClose (mon=<optimized out>)
at qemu/qemu_monitor.c:860
#9 0x00007fcd0daf61ad in qemuProcessStop (driver=driver@entry=0x7fcd04079d50,
vm=vm@entry=0x7fcccc00a850,
reason=reason@entry=VIR_DOMAIN_SHUTOFF_DESTROYED, flags=flags@entry=0)
at qemu/qemu_process.c:4057
#10 0x00007fcd0db323cf in qemuDomainDestroyFlags (dom=<optimized out>,
flags=<optimized out>) at qemu/qemu_driver.c:1977
#11 0x00007fcd1637ff51 in virDomainDestroyFlags (
domain=domain@entry=0x7fccf00c1830, flags=1) at libvirt.c:2256
At frame #10 we are holding the domain lock, we call into
qemuProcessStop() to cleanup QEMU, which triggers the monitor
to close, which invokes qemuProcessHandleMonitorDestroy() which
tries to obtain the domain lock again. This is a non-recursive
lock, hence hang.
Since qemuMonitorPtr is a virObject, the unref call in
qemuProcessHandleMonitorDestroy no longer needs mutex
protection. The assignment of priv->mon = NULL, can be
instead done by the caller of qemuMonitorClose(), thus
removing all need for locking.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If QEMU quits immediately after we opened the monitor it was
possible we would skip the clearing of the SELinux process
socket context
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In the cgroups APIs we have a virCgroupKillPainfully function
which does the loop sending SIGTERM, then SIGKILL and waiting
for the process to exit. There is similar functionality for
simple processes in qemuProcessKill, but it is tangled with
the QEMU code. Untangle it to provide a virProcessKillPainfuly
function
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
