This patch removes and replaces virCHDomainObjInitJob() with
general virDomainObjInitJob().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The virDomainObj struct has @pid member where the domain's
hypervisor PID is stored (e.g. QEMU/bhyve/libvirt_lxc/... PID).
However, we are not consistent when it comes to shutoff state.
Initially, because virDomainObjNew() uses g_new0() the @pid is
initialized to 0. But when domain is shut off, some functions set
it to -1 (virBhyveProcessStop, virCHProcessStop, qemuProcessStop,
..).
In other places, the @pid is tested to be 0, on some other places
it's tested for being negative and in the rest for being
positive.
To solve this inconsistency we can stick with either value, -1 or
0. I've chosen the latter as it's safer IMO. For instance if by
mistake we'd kill(vm->pid, SIGTERM) we would kill ourselves
instead of init's process group.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
All these features are supposed to be handled by the call to
virDriverFeatureIsGlobal() placed right above the switch
statement, so if any of them is actually encountered inside
the switch statement it means there's a bug in the driver and
we should report an error.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The aim of 'restrictive' numatune mode is to rely solely on
CGroups to have QEMU running on configured NUMA nodes. However,
we were never setting the cpuset controller when a domain was
starting up. We are doing so only when
virDomainSetNumaParameters() is called (aka live pinning).
This is obviously wrong. Fortunately, fix is simple as
'restrictive' is similar to 'strict' - every location where
VIR_DOMAIN_NUMATUNE_MEM_STRICT occurs can be audited and
VIR_DOMAIN_NUMATUNE_MEM_RESTRICTIVE case can be added.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2070380
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is similar to v7.10.0-354-g06f405c627 except this time it
fixes CH driver.
With strict numatune we can't guarantee that all memory is moved
to new location. Therefore, let's forbid moving memory in that
case. However, allow it for restrictive mode, which is documented
to be best effort.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since its introduction in v1.3.2-43-gef1fa55e46 there is a dead
code in virDomainCgroupSetupGlobalCpuCgroup() (well,
qemuSetupGlobalCpuCgroup() back then). The code formats NUMA
nodeset but never sets it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use 'virStorageType' as type for the 'type' member and convert the code
to work properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'virDrvFeature' has a combination of features which are asserted by
the specific driver and features which are actually global.
In many cases the implementation was cargo-culted into newer drivers
without re-assesing whether it makes sense.
This patch introduces a global function which will specifically handle
these global flags and defer the rest to the driver.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Even though the CH driver doesn't implement virNetworkUpdate()
API, when it does it will see the arguments in correct order.
This is similar to other drivers that don't implement the API,
like ESX, libxl, LXC, etc. Enabling this driver feature stops
clients from swapping the arguments (see comment in the API for
more info).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
No functional change intended. This change makes the refactoring to
automatic mutex management easier to follow.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are two places where a domain can be started in CH driver:
chDomainCreateXML() and chDomainCreateWithFlags(). Both acquire a
job (good), but neither of them checks whether the domain isn't
already running. This is wrong. Fortunately, both function call
the very same virCHProcessStart() rendering it the best place for
such check.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
There are few places where a call to virDomainObjListRemove() is
guarded with !vm->persistent check. And there are some places
which are missing this check completely (leading us to losing a
domain). To prevent such mistakes introduce
virCHDomainRemoveInactive() which does the check for us. Also
replace all occurrences of virDomainObjListRemove() with the call
to the new function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
When creating a domain failed, then the virCHDomainObjEndJob()
would be jumped over. Fix this by creating enjob label and fixing
one goto.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Inside chDomainCreateXML(), towards the end, the driver is
unlocked even though there is no corresponding driver lock call
before that. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
There is no need to lock whole driver when accessing
virDomainObjList. Those APIs were specifically tailored to be
thread safe (when we were dropping QEMU driver lock). Don't
resurrect old history.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
In chConnectGetVersion() the CH driver is locked in order to read
driver->version. This is needless, because not only is the
version set with driver unlocked (chStateInitialize() calls
chExtractVersion() which sets the version), but the version is
practically immutable. Once driver initialized itself it's never
changed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
This change was generated using the following spatch:
@ rule1 @
expression a;
identifier f;
@@
<...
- f(*a);
... when != a;
- *a = NULL;
+ g_clear_pointer(a, f);
...>
@ rule2 @
expression a;
identifier f;
@@
<...
- f(a);
... when != a;
- a = NULL;
+ g_clear_pointer(&a, f);
...>
Then, I left some of the changes out, like tools/nss/ (which
doesn't link with glib) and put back a comment in
qemuBlockJobProcessEventCompletedActiveCommit() which coccinelle
decided to remove (I have no idea why).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virCHMonitorGetIOThreads returns an int, not size_t.
Also return early if it's negative, because promoting it to
an unsigned type in the for loop condition could lead to
an infinte loop.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We recently started listing these in the spec file and, since we
were not creating them during the installation phase, that broke
RPM builds.
Fixes: 4b43da0bff
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The service files were copied out of the service file for libvirtd and
the name of the corresponding manpage was not fixed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2045959
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
using virCHProcessSetupPid
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Enable support of VIR_DRV_FEATURE_TYPED_PARAM_STRING to enable numatune
Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The chDomObjFromDomain() function which currently lives as a
static one in ch_driver.c is going to be needed in other parts
of the driver. Move it into ch_domain.c, rename to
virCHDomainObjFromDomain() and expose in corresponding header
file for the rest of the driver to use.
Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This reverts commit 938382b60a.
Turns out, the commit did more harm than good. It changed
semantics on some public APIs. For instance, while
qemuDomainGetInfo() previously did not returned an error it does
now. While the calls to virProcessGetStatInfo() is guarded with
virDomainObjIsActive() it doesn't necessarily mean that QEMU's
PID is still alive. QEMU might be gone but we just haven't
realized it (e.g. because the eof handler thread is waiting for a
job).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2041610
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
sysconfig files are owned by the admin of the host. They have the
liberty to put anything they want into these files. This makes it
difficult to provide different built-in defaults.
Remove the sysconfig file and place the current desired default into
the service file.
Local customizations can now go either into /etc/sysconfig/name
or /etc/systemd/system/name.service.d/my-knobs.conf
Attempt to handle upgrades in libvirt.spec.
Dirty files which are marked as %config will be renamed to file.rpmsave.
To restore them automatically, move stale .rpmsave files away, and
catch any new rpmsave files in %posttrans.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Currently virProcessGetStatInfo() always returns success and only logs error
when it is unable to parse the data. Make this function actually report the
error and return a negative value in this error scenario.
Fix the callers so that they do not override the error generated.
Also fix non-linux implementation of this function so as to report error.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add domainGetVcpuPinInfo and nodeGetCPUMap callbacks to ch driver
Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After recent cleanups, there are some pointless cleanup sections.
Clean them up.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Convert all the functions that generate virCaps to use g_auto
and g_steal_pointer.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Convert all the users who unref their virCaps object unconditionally.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Instead of calling virDomainDefFree() explicitly, we can annotate
variables with g_autoptr().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upon successful return from virDomainObjListAdd() the
virDomainObj is the owner of secret definition. To make this
ownership transfer even more visible, lets pass the definition as
a double pointer and use g_steal_pointer().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There is a leftover 'ptys' variable, which we only assign
to and one assignment to 'content', where we add an empty
'pty' object.
Remove 'ptys'.
Fixes: 93accefd9e
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Kristína Hanicová <khanicov@redhat.com>
