Availability of the vmpvscsi controller model is gated by the pvscsi
capability.
Signed-off-by: Chris Jester-Young <cky@cky.nz>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This capability flags support for `-device pvscsi`, which provides the
VMware paravirtual SCSI controller.
Signed-off-by: Chris Jester-Young <cky@cky.nz>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
'blockdev-mirror' requires the write permission internally to do the
copy. This means that we have to force the image to be read-write for
the duration of the copy and can fix it after the copy is done.
https://bugzilla.redhat.com/show_bug.cgi?id=1832204
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With -blockdev or when reusing externally created images and thus
without the need for formatting the image we actually can support
snapshots of read-only disks. Arguably it's not very useful so they are
not done by default but users of libvirt such as oVirt are actually
using this.
https://bugzilla.redhat.com/show_bug.cgi?id=1832204
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need qemu to be able to write the newly created images so that it can
format them to the specified storage format.
Force write access by relabelling the images when formatting.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'Create' API of the two storage file backends is used only on
code-paths where we need to format the image after creating an empty
file. Since the DAC security driver only modifies the owner of the file
and not the mode we need to create all files which are going to be
formatted with the write bit set for the user.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remember the preferred placement of <auth> and <encryption> for a disk
source across libvirtd restarts.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Modern way to store <auth> and <encryption> of a <disk> is under
<source>. This was added to mirror how <backingStore> handles these and
in fact they are relevant to the source rather than to any other part of
the disk. Historically we allowed them to be directly under <disk> and
we need to keep compatibility.
This wasn't a problem until introduction of -blockdev in qemu using of
<auth> or <encryption> plainly wouldn't work with backing chains.
Now that it works in backing chains and can be moved back and forth
using snapshots/block-commit we need to ensure that the original
placement is properly kept even if the source changes.
To achieve the above semantics we need to store the preferred placement
with the disk definition rather than the storage source definitions and
also ensure that the modern way is chosen when the VM started with
<source/encryption> only in the backing store.
https://bugzilla.redhat.com/show_bug.cgi?id=1822878
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Any non-raw block layer feature will not work with raw SCSI command
passthrough via 'scsi-block'. Explicitly refuse use of luks encryption,
storage slices and copy on read.
https://bugzilla.redhat.com/show_bug.cgi?id=1820040
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically the virtio-blk frontend by default enabled SCSI emulation
and tried to do SCSI command passthrough. As this was enabled by default
there's a fallback mechanism in place in cases when the backend doesn't
support SCSI for any reason.
This is not the case when disk type=lun is used with 'scsi-block' via
'virtio-scsi'.
We did not restrict configurations when the user picks 'qcow2' or any
other format as format of the disk, in which case the emulation is
disabled as such configuration doesn't make sense.
This patch unifies the approach so that 'raw' is required both when used
via 'virtio-blk' and 'virtio-scsi' so that the user is presented with
the expected configuration. Note that use of <disk type='lun'> is
already very restrictive as it requires a block device or iSCSI storage.
Additionally the scsi emulation is now deprecated by qemu with
virtio-blk as it conflicts with virtio-1 and the alternative is to use
'virtio-scsi' which performs better and is along for a very long time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The property was deprecated. Don't format it based on the new capability
if the user didn't explicitly request it.
https://bugzilla.redhat.com/show_bug.cgi?id=1829550
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically the 'scsi' passthrough feature of virtio-blk-pci
was enabled by default. Libvirt was disabling it due to security
implications outlined in libvirt commit v0.9.9-4-g177db08775 if it was
not explicitly requested. In qemu commit v2.4.0-1566-ged65fd1a27 the
default value was changed to disabled in preparation for virtio-1.
Starting from QEMU-5.0 the 'scsi' property was also deprecated. There
replacement for the functionality is to use 'virtio-scsi' for the
purpose. This isn't a direct replacement though.
Add capability named QEMU_CAPS_VIRTIO_BLK_SCSI_DEFAULT_DISABLED which
allows us to stop formatting the 'scsi=' property if it's disabled by
default and not requested so that we don't use deprecated features.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU-5.0 added 'default-value' field for any applicable property
returned by 'device-list-properties'. Add an optional callback for any
device property definition which will allow detection of features and
default values based on this new data.
This unfortunately means that the description of properties had to move
from the slightly-too-generic 'struct virQEMUCapsStringFlags' to a new
type (virQEMUCapsDevicePropsFlags) which also has the callback property
and the corresponding change in the initializers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Create a hash table of device property names which also stores the
corresponding JSON object so that the detection code can look at the
recently added 'default-value' field and possibly others.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic cleanup of variables and current style of header.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virQEMUCapsProbeQMPGenericProps is used only in one place now. Move the
code directly to virQEMUCapsProbeQMPObjectTypes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reimplement device property detection directly rather than using
virQEMUCapsProbeQMPGenericProps in preparation for changes to the
detection code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function was parsing 'qom-list-types' and then also calling function
which parses 'device-list-properties' and also 'qom-list-properties'.
Split it up into individual functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Help QEMU in deprecation of -drive if=none without the need to refactor
all old boards. Stop masking out -blockdev support when -drive if=sd
needs to be used. We achieve this by forbidding blockjobs and
special-casing all other code paths. Blockjobs are sacrificed in this
case as SD cards are a corner case for some ARM boards and are thus not
used commonly.
https://bugzilla.redhat.com/show_bug.cgi?id=1821692
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
SD cards need to be instantiated via -drive if=sd. This means that all
cases where we use the blockdev path need to be special-cased for SD
cards.
Note that at this point QEMU_CAPS_BLOCKDEV is still cleared if the VM
config has a SD card.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the drive alias for all cases when we can't generate qomName. This
is meant to handle disks on 'sd' bus which are instantiated via -drive
if=sd as there isn't any specific QOM name for them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We still have to use -drive to instantiate sd disks. Combining that with
the new logic for blockjobs would be very complicated and not worth it
given that 'sd' cards work only on few rarely used machine types of
non-common architectures and libvirt didn't implement support for 'sd'
bus controllers. This will allow us to use -blockdev for other kinds on
such machines while sacrificing block jobs.
Note: this is currently no-op as we mask-out the QEMU_CAPS_BLOCKDEV
capability if any of the disks has bus='sd'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can't set the type of the device on the 'sd' bus and realistically a
cdrom doesn't even make sense there. Forbid it.
Note that the output of in disk-cdrom-bus-other.x86_64-latest.args
switched to blockdev as it's no longer locked out due to use of a disk
on 'sd' bus.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'vexpress-a9' ARM board supports the native 'sd' bus as well as
virtio. Add a test case for proving that upcoming changes to handling of
'sd' work. This config was also tested with real qemu and the qemu
process starts correctly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In case of 'sd' cards we'll use pre-blockdev code also if qemu supports
blockdev. In that specific case we'll need to mask out blockdev support
for 'sd' disks. Plumb in a boolean to allow it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Make sure that we don't try to reload node names with -blockdev. If
something doesn't have a node name the update will not make the
situation better.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are no users for the qemu-specific enum values. Remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There's no point using the qemu-specific disk bus names in the error
message.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove all the universal code since the 'else' part formats commandline
only for the SD card based disk. Note that we can use virDiskNameToIndex
without the check as we already validate that 'disk->dst' contains a
properly formatted string in the validation code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
For 'SD' disks and floppies in the pre-blockdev era we don't format
-device. Extract the logic so that it's more clear and add comments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The function effectively boils down to whether the disk is 'SD'. Since
we'll need to make more decisions based on the fact whether the disk is
on the SD bus, rename the function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove the function and passing of 'def' through the callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Previously we've validated it in qemuCheckDiskConfig which was directly
called from the command line generator. Move the checks to the validator
where they belong.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the code from qemuCheckDiskConfigBlkdeviotune in
src/qemu/qemu_commandline.c to
qemuValidateDomainDeviceDefDiskBlkdeviotune.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Agregate validation of frontend properties in a new function called
qemuValidateDomainDeviceDefDiskFrontend.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Switch to DO_TEST_CAPS_LATEST for all of them and also add pre-blockdev
case for 'disk-discard' as we had it before.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the tests to DO_TEST_CAPS_LATEST. Since switch to blockdev stopped
us formatting the tunning parameters on the command line let's also add
version cases for qemu-4.1 data which doesn't enable blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When firewalld is stopped, it removes *all* iptables rules and chains,
including those added by libvirt. Since restarting firewalld means
stopping and then starting it, any time it is restarted, libvirt needs
to recreate all the private iptables chains it uses, along with all
the rules it adds.
We already have code in place to call networkReloadFirewallRules() any
time we're notified of a firewalld start, and
networkReloadFirewallRules() will call
networkPreReloadFirewallRules(), which calls
networkSetupPrivateChains(); unfortunately that last call is called
using virOnce(), meaning that it will only be called the first time
through networkPreReloadFirewallRules() after libvirtd starts - so of
course when firewalld is later restarted, the call to
networkSetupPrivateChains() is skipped.
The neat and tidy way to fix this would be if there was a standard way
to reset a pthread_once_t object so that the next time virOnce was
called, it would think the function hadn't been called, and call it
again. Unfortunately, there isn't any official way of doing that (we
*could* just fill it with 0 and hope for the best, but that doesn't
seem very safe.
So instead, this patch just adds a static variable called
chainInitDone, which is set to true after networkSetupPrivateChains()
is called for the first time, and then during calls to
networkPreReloadFirewallRules(), if chainInitDone is set, we call
networkSetupPrivateChains() directly instead of via virOnce().
It may seem unsafe to directly call a function that is meant to be
called only once, but I think in this case we're safe - there's
nothing in the function that is inherently "once only" - it doesn't
initialize anything that can't safely be re-initialized (as long as
two threads don't try to do it at the same time), and it only happens
when responding to a dbus message that firewalld has been started (and
I don't think it's possible for us to be processing two of those at
once), and even then only if the initial call to the function has
already been completed (so we're safe if we receive a firewalld
restart call at a time when we haven't yet called it, or even if
another thread is already in the process of executing it. The only
problematic bit I can think of is if another thread is in the process
of adding an iptable rule at the time we're executing this function,
but 1) none of those threads will be trying to add chains, and 2) if
there was a concurrency problem with other threads adding iptables
rules while firewalld was being restarted, it would still be a problem
even without this change.
This is yet another patch that fixes an occurrence of this error:
COMMAND_FAILED: '/usr/sbin/iptables -w10 -w --table filter --insert LIBVIRT_INP --in-interface virbr0 --protocol tcp --destination-port 67 --jump ACCEPT' failed: iptables: No chain/target/match by that name.
In particular, this resolves: https://bugzilla.redhat.com/1813830
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
networkSetupPrivateChains() is currently called only once per run of
libvirtd, so it can assume that errInitV4 and errInitV6 are empty/null
when it is called. In preparation for potentially calling this
function multiple times during one run, this patch moves the reset of
errInitV[46] to the top of the function, to assure no memory is
leaked.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
As suggested in the linked bug, libvirt should firstly check
whether the major number of the device is device mapper major.
Because if it isn't subsequent DM_DEVICE_DEPS task may not only
fail, but also yield different results. In the bugzilla this is
demonstrated by creating a devmapper target named 'loop0' and
then creating loop target /dev/loop0. When the latter is then
passed to a domain, our virDevMapperGetTargetsImpl() function
blindly asks devmapper to provide target dependencies for
/dev/loop0 and because of the way devmapper APIs work, it will
'sanitize' the input by using the last component only which is
'loop0' and thus return different results than expected.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1823976
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This format is much easier to tweak and update.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It's been more than six months since we adopted GLib and we've
been pretty aggressive at replacing our homegrown APIs with more
standard ones, so by now most of the symbols mentioned in this
document haven't been around for quite a long time already.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
With the move to GitLab CI one of the things we miss from Jenkins is a
single page dashboard showing CI status across all projects. This is a
very simple replacement that uses badges for CI pipeline status.
A CSS tweak is needed because RST->HTML adds redundant <p> tags inside
table cells which causes excessive vertical whitespace to appear.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We have a framework to register cleanup callbacks that are run
when a domain is shut down. The idea is to run callbacks in
reverse order than they were registered. However, looking at the
code this is not the case. Fortunately, this framework is used to
register a single callback and a single callback only -
qemuMigrationDstPrepareCleanup() - therefore there was no problem
just yet.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit a13b2905f7 missed an adjustment to a test that is only run when
building against xen <= 4.9, where LIBXL_HAVE_BUILDINFO_NESTED_HVM is
not defined. Adjust fullvirt-cpuid-legacy-nest test similar to the others.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
When no video device is specified in config we should set both
hvm.nographic to 1 and hvm.vga.kind to NONE.
Without hvm.vga.kind=LIBXL_VGA_INTERFACE_TYPE_NONE both -nographic and
-device 'cirrus-vga' are on qemu cmdline.
Signed-off-by: Artur Puzio <contact@puzio.waw.pl>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Turns out that it's not enough to pass the qemu:///embed root to
virQEMUDriverConfigNew(), you also have to make sure the same
string is copied into the virQEMUDriver structure yourself, and
not doing so in our case resulted in the cleanup never happening
and in distcheck failing because of that.
On the other hand, actually setting config->embeddedRoot would
result in different paths being generated for each test run, which
would obviously break qemuxml2argvtest, so that's not an option
either.
This reverts commit d98cc1968e.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
