Two reasons:
1.in none hotplug, we will pass it. We can see from libvirt function
qemuBuildVhostuserCommandLine
2.qemu will use this vetcor num to init msix table. If we don't pass, qemu
will use default value, this will cause VM can only use default value
interrupts at most.
Signed-off-by: gaohaifeng <gaohaifeng.gao@huawei.com>
Consider the following XML snippets:
$ cat scsicontroller.xml
<controller type='scsi' model='virtio-scsi' index='0'/>
$ cat scsihostdev.xml
<hostdev mode='subsystem' type='scsi'>
<source>
<adapter name='scsi_host0'/>
<address bus='0' target='8' unit='1074151456'/>
</source>
</hostdev>
If we create a guest that includes the contents of scsihostdev.xml,
but forget the virtio-scsi controller described in scsicontroller.xml,
one is silently created for us. The same holds true when attaching
a hostdev before the matching virtio-scsi controller.
(See qemuDomainFindOrCreateSCSIDiskController for context.)
Detaching the hostdev, followed by the controller, works well and the
guest behaves appropriately.
If we detach the virtio-scsi controller device first, any associated
hostdevs are detached for us by the underlying virtio-scsi code (this
is fine, since the connection is broken). But all is not well, as the
guest is unable to receive new virtio-scsi devices (the attach commands
succeed, but devices never appear within the guest), nor even be
shutdown, after this point.
While this is not libvirt's problem, we can prevent falling into this
scenario by checking if a controller is being used by any hostdev
devices. The same is already done for disk elements today.
Applying this patch and then using the XML snippets from earlier:
$ virsh detach-device guest_01 scsicontroller.xml
error: Failed to detach device from scsicontroller.xml
error: operation failed: device cannot be detached: device is busy
$ virsh detach-device guest_01 scsihostdev.xml
Device detached successfully
$ virsh detach-device guest_01 scsicontroller.xml
Device detached successfully
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
If libvirtd is running unprivileged, it can open a device's PCI config
data in sysfs, but can only read the first 64 bytes. But as part of
determining whether a device is Express or legacy PCI,
qemuDomainDeviceCalculatePCIConnectFlags() will be updated in a future
patch to call virPCIDeviceIsPCIExpress(), which tries to read beyond
the first 64 bytes of the PCI config data and fails with an error log
if the read is unsuccessful.
In order to avoid creating a parallel "quiet" version of
virPCIDeviceIsPCIExpress(), this patch passes a virQEMUDriverPtr down
through all the call chains that initialize the
qemuDomainFillDevicePCIConnectFlagsIterData, and saves the driver
pointer with the rest of the iterdata so that it can be used by
qemuDomainDeviceCalculatePCIConnectFlags(). This pointer isn't used
yet, but will be used in an upcoming patch (that detects Express vs
legacy PCI for VFIO assigned devices) to examine driver->privileged.
Adjust the device string that is built for vhost-scsi devices so that it
can be invoked from hotplug.
From the QEMU command line, the file descriptors are expect to be numeric only.
However, for hotplug, the file descriptors are expected to begin with at least
one alphabetic character else this error occurs:
# virsh attach-device guest_0001 ~/vhost.xml
error: Failed to attach device from /root/vhost.xml
error: internal error: unable to execute QEMU command 'getfd':
Parameter 'fdname' expects a name not starting with a digit
We also close the file descriptor in this case, so that shutting down the
guest cleans up the host cgroup entries and allows future guests to use
vhost-scsi devices. (Otherwise the guest will silently end.)
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
We already have a "scsi" hostdev subsys type, which refers to a single
LUN that is passed through to a guest. But what of things where
multiple LUNs are passed through via a single SCSI HBA, such as with
the vhost-scsi target? Create a new hostdev subsys type that will
carry this.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Just like in the previous commit, we are not updating CGroups on
chardev hot(un-)plug and thus leaving qemu unable to access any
non-default device users are trying to hotplug.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If users try to hotplug RNG device with a backend different to
/dev/random or /dev/urandom the whole operation fails as qemu is
unable to access the device. The problem is we don't update
device CGroups during the operation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Before now, all the qemu hotplug functions assumed that all devices to
be hotplugged were legacy PCI endpoint devices
(VIR_PCI_CONNECT_TYPE_PCI_DEVICE). This worked out "okay", because all
devices *are* legacy PCI endpoint devices on x86/440fx machinetypes,
and hotplug didn't work properly on machinetypes using PCIe anyway
(hotplugging onto a legacy PCI slot doesn't work, and until commit
b87703cf any attempt to manually specify a PCIe address for a
hotplugged device would be erroneously rejected).
This patch makes all qemu hotplug operations honor the pciConnectFlags
set by the single all-knowing function
qemuDomainDeviceCalculatePCIConnectFlags(). This is done in 3 steps,
but in a single commit since we would have to touch the other points
at each step anyway:
1) add a flags argument to the hypervisor-agnostic
virDomainPCIAddressEnsureAddr() (previously it hardcoded
..._PCI_DEVICE)
2) add a new qemu-specific function qemuDomainEnsurePCIAddress() which
gets the correct pciConnectFlags for the device from
qemuDomainDeviceConnectFlags(), then calls
virDomainPCIAddressEnsureAddr().
3) in qemu_hotplug.c replace all calls to
virDomainPCIAddressEnsureAddr() with calls to
qemuDomainEnsurePCIAddress()
So in effect, we're putting a "shim" on top of all calls to
virDomainPCIAddressEnsureAddr() that sets the right pciConnectFlags.
Coverity identified that this variable might be leaked. And it's
right. If an error occurred and we have to roll back the control
jumps to try_remove label where we save the current error (see
0e82fa4c34 for more info). However, inside the code a jump onto
other label is possible thus leaking the error object.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The memory device alias needs to be treated as machine ABI as qemu is
using it in the migration stream for section labels. To simplify this
generate the alias from the slot number unless an existing broken
configuration is detected.
With this patch the aliases are predictable and even certain
configurations which would not be migratable previously are fixed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1359135
As with other devices assign the slot number right away when adding the
device. This will make the slot numbers static as we do with other
addressing elements and it will ultimately simplify allocation of the
alias in a static way which does not break with qemu.
https://bugzilla.redhat.com/show_bug.cgi?id=1386976
We have everything ready. Actually the only limitation was our
check that denied hotplug of vhost-user.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
If there is an error hotpluging a net device (for whatever
reason) a rollback operation is performed. However, whilst doing
so various helper functions that are called report errors on
their own. This results in the original error to be overwritten
and thus misleading the user.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Propagate the selected or default level to qemu if it's supported.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1376009
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This is needed in order to migrate a domain with shmem devices as that
is not allowed to migrate.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Return 0 instead of 1, so that qemuDomainAttachChrDevice does not
assume the address neeeds to be released on error.
No functional change, since qemuDomainReleaseDeviceAddress has been a noop
for virtio serial addresses since the address cache was removed
in commit 19a148b.
This time do not require an address cache as a parameter.
Simplify qemuDomainAttachChrDeviceAssignAddr to not generate
the virtio serial address cache for devices of other types.
Partially reverts commit 925fa4b.
Commit 19a148b dropped the cache from QEMU's private domain object.
Assume the callers do not have the cache by default and use
a longer name for the internal ones that do.
This makes the shorter 'virDomainVirtioSerialAddrAutoAssign'
name availabe for a function that will not require the cache.
Support for virtio disks was added in commit id 'fceeeda', but not for
SCSI drives. Add the secret for the server when hotplugging a SCSI drive.
No need to make any adjustments for unplug since that's handled during
the qemuDomainDetachDiskDevice call to qemuDomainRemoveDiskDevice in
the qemuDomainDetachDeviceDiskLive switch.
Added a test to/for the command line processing to show the command line
options when adding a SCSI drive for the guest.
https://bugzilla.redhat.com/show_bug.cgi?id=1300776
Complete the implementation of support for TLS encryption on
chardev TCP transports by adding the hotplug ability of a secret
to generate the passwordid for the TLS object for chrdev, RNG,
and redirdev.
Fix up the order of object removal on failure to be the inverse
of the attempted attach (for redirdev, chr, rng) - for each the
tls object was being removed before the chardev backend.
Likewise, add the ability to hot unplug that secret object as well
and be sure the order of unplug matches that inverse order of plug.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add the secret object so the 'passwordid=' can be added if the command line
if there's a secret defined in/on the host for TCP chardev TLS objects.
Preparation for the secret involves adding the secinfo to the char source
device prior to command line processing. There are multiple possibilities
for TCP chardev source backend usage.
Add test for at least a serial chardev as an example.
Need to remove the drive first, then the secobj and/or encobj if they exist.
This is because the drive has a dependency on secobj (or the secret for
the networked storage server) and/or the encobj (or the secret for the
LUKS encrypted volume). Deleting either object first leaves an drive
without it's respective objects.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit id '2c32237' added the TLS object removal to the DetachChrDevice
all when it should have been added to the RemoveChrDevice since that's
the norm for similar processing (e.g. disk)
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add an optional "tls='yes|no'" attribute for a TCP chardev.
For QEMU, this will allow for disabling the host config setting of the
'chardev_tls' for a domain chardev channel by setting the value to "no" or
to attempt to use a host TLS environment when setting the value to "yes"
when the host config 'chardev_tls' setting is disabled, but a TLS environment
is configured via either the host config 'chardev_tls_x509_cert_dir' or
'default_tls_x509_cert_dir'
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Currently the union has only one member so remove that union. If there
is a need to add a new type of source for new bus in the future this
will force the author to add a union and properly check bus type before
any access to union member.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit id '2c322378' missed the nuance that the rng backend could be
using a TCP chardev and if TLS is enabled on the host, thus will need
to have the TLS object added.
Commit id '2c322378' missed the nuance that the redirdev backend could
be using a TCP chardev and if TLS is enabled on the host, thus will need
to have the TLS object added.
Use a pointer and the virDomainChrSourceDefNew() function in order to
allocate the structure for _virDomainRedirdevDef.
Signed-off-by: John Ferlan <jferlan@redhat.com>
from virDomainDefPtr to virDomainObjPtr so that the function has
access to the other parts of the virDomainObjPtr. Take advantage of
this by removing the "priv" arg and retrieving it from the
virDomainObjPtr instead.
No functional change.
Change the virDomainChrDef to use a pointer to 'source' and allocate
that pointer during virDomainChrDefNew.
This has tremendous "fallout" in the rest of the code which mainly
has to change source.$field to source->$field.
Signed-off-by: John Ferlan <jferlan@redhat.com>
There was inconsistency between alias used to create tls-creds-x509
object and alias used to link that object to chardev while hotpluging.
Hotplug ends with this error:
error: Failed to detach device from channel-tcp.xml
error: internal error: unable to execute QEMU command 'chardev-add':
No TLS credentials with id 'objcharchannel3_tls0'
In XML we have for example alias "serial0", but on qemu command line we
generate "charserial0".
The issue was that code, that creates QMP command to hotplug chardev
devices uses only the second alias "charserial0" and that alias is also
used to link the tls-creds-x509 object.
This patch unifies the aliases for tls-creds-x509 to be always generated
from "charserial0".
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We need to make sure that the chardev is TCP. Without this check we
may access different part of union and corrupt pointers.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1366108
There are couple of things that needs to be done in order to
allow vhost-user hotplug. Firstly, vhost-user requires a chardev
which is connected to vhost-user bridge and through which qemu
communicates with the bridge (no acutal guest traffic is sent
through there, just some metadata). In order to generate proper
chardev alias, we must assign device alias way sooner.
Then, because we are plugging the chardev first, we need to do
the proper undo if something fails - that is remove netdev too.
We don't want anything to be left over in case attach fails at
some point.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of blindly claim support for hot-plugging of every
interface type out there we should copy approach we have for
device types: white listing supported types and explicitly error
out on unsupported ones.
For instance, trying to hotplug vhostuser interface results in
nothing usable from guest currently. vhostuser typed interfaces
require additional work on our side.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The idea is to have function that does some checking at its
beginning and then have one big switch for all the interface
types it supports.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function for some weird reason returns integer instead of
virDomainNetType type. It is important to return the correct type
so that we know what values we can expect.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Qemu always opens the tray if forced to. Skip the waiting step in such
case.
This also helps if qemu does not report the tray change event when
opening the cdrom forcibly (the documentation says that the event will
not be sent although qemu in fact does trigger it even if @force is
selceted).
This is a workaround for a qemu issue where qemu does not send the tray
change event in some cases (after migration with empty closed locked
drive) and thus renders the cdrom useless from libvirt's point of view.
Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1368368
If the incoming XML defined a path to a TLS X.509 certificate environment,
add the necessary 'tls-creds-x509' object to the VIR_DOMAIN_CHR_TYPE_TCP
character device.
Likewise, if the environment exists the hot unplug needs adjustment as
well. Note that all the return ret were changed to goto cleanup since
the cfg needs to be unref'd
Signed-off-by: John Ferlan <jferlan@redhat.com>
The linkstate setting of an <interface> is only meant to change the
online status reported to the guest system by the emulated network
device driver in qemu, but when support for auto-creating tap devices
for <interface type='ethernet'> was added in commit 9717d6, a chunk of
code was also added to qemuDomainChangeNetLinkState() that sets the
online status of the tap device (i.e. the *host* side of the
interface) for type='ethernet'. This was never done for tap devices
used in type='bridge' or type='network' interfaces, nor was it done in
the past for tap devices created by external scripts for
type='ethernet', so we shouldn't be doing it now.
This patch removes the bit of code in qemuDomainChangeNetLinkState()
that modifies online status of the tap device.
This patch removes the old vcpu unplug code completely and replaces it
with the new code using device_del. The old hotplug code basically never
worked with any recent qemu and thus is useless.
As the new code is using device_del all the implications of using it
are present. Contrary to the device deletion code, the vcpu deletion
code fails if the unplug request is not executed in time.
https://bugzilla.redhat.com/show_bug.cgi?id=1289391
Rather than pass the whole drive string (which contained the alias),
pass only the alias for the qemuMonitorDriveDel call in the error
path when adding a host device in the monitor fails.
