Update the KVM feature tests for QEMU's kvm-poll-control performance
hint.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU version 4.2 introduced a performance feature under commit
d645e13287 ("kvm: i386: halt poll control MSR support").
This patch adds a new KVM feature 'poll-control' to set this performance
hint for KVM guests. The feature is off by default.
To enable this hint and have libvirt add "-cpu host,kvm-poll-control=on"
to the QEMU command line, the following XML code needs to be added to the
guest's domain description:
<features>
<kvm>
<poll-control state='on'/>
</kvm>
</features>
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In v6.3.0-rc1~67 I've made a switch: instead of listening on udev
events the nodedev driver started listening for kernel events.
This was because when a device changes its name (e.g. NICs) we
will get "move" event with DEVPATH_OLD property set, which we can
then use to remove the old device and thus keep our internal list
up to date. The switch to "kernel" source was made because if the
old NICs naming (eth0, eth1, ...) is enabled (e.g. via
net.ifnames=0 on the kernel cmd line) then udev overwrites the
property with the new name making our internal list go out of
sync. Interestingly, when the od NICs naming is not enabled then
the DEVPATH_OLD contains the correct value.
But as it turns out, "kernel" source might be missing some other
important properties, e.g. USB vendor/product IDs. Therefore,
switch back to "udev" source and wish the best of luck to users
using the old NICs naming.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1897625
Fixes: 9a13704818
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
wireshark plugin was disabled in RHEL because RHEL-7 was too old, but we
forgot to enable it in RHEL-8 where it builds fine.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We only turn on with_wireshark if we already know the distro is
guaranteed to have new enough packages. The versioned dep is thus not
required.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If using the declared min version of wireshark, 2.4.0, libvirt plugin
fails to build. This min version isn't present in any supported distros
and thus not tested by CI.
We don't support wireshark on RHEL-7 since it has 1.x.x series. The next
oldest version present in supported distros is 2.6.2 on RHEL-8.
Thus we should bump the min version to 2.6.0. This also lets us assume
that the "plugindir" variable exists in pkg-config.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Per the platform support rules, we no longer need to consider SLES 12 as
a target, and so can now assume pkg-config support in yajl.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Now that the domCaps cache is history, this code is no longer
used and thus can be removed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Currently, whenever a domain capabilities is needed (fortunately,
after cleanup done by previous commits it is now only in
virConnectGetDomainCapabilities()), the object is stored in a
cache. But there is no invalidation mechanism for the cache
(except the implicit one - the cache is part of qemuCaps and thus
share its lifetime, but that is not enough). Therefore, if
something changes - for instance new firmware files are
installed, or old are removed these changes are not reflected in
the virConnectGetDomainCapabilities() output.
Originally, the caching was there because domCaps were used
during device XML validation and they were used a lot from our
test suite. But this is no longer the case. And therefore, we
don't need the cache and can construct fresh domCaps on each
virConnectGetDomainCapabilities() call.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1807198
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that nothing uses virDomainCapsDeviceDefValidate() it can be
removed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The aim is to eliminate virDomainCapsDeviceDefValidate(). And in
order to do so, the domain video model has to be validated in
qemuValidateDomainDeviceDefVideo().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The aim is to eliminate virDomainCapsDeviceDefValidate(). And in
order to do so, the domain RNG model has to be validated in
qemuValidateDomainRNGDef().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This is a Coverity fix pointed out by John in IRC. This code
was introduced in 19d74fdf0e, when the TPM Proxy device for
for ppc64 was introduced.
This will leak in case we have 2 TPMs in the same domain, a
possible scenario with the protected Ultravisor execution in
PowerPC guests.
Fixes: 19d74fdf0e
Reported-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Introduced by commit <22494556542c676d1b9e7f1c1f2ea13ac17e1e3e> which
fixed a CVE.
If the @path passed to virDMSanitizepath() is not a DM name or not a
path to DM name this function could return incorrect sanitized path as
it would always be the first device under /dev/mapper/.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Commit <2f3b7a5555c4cf4127ff3f8e00746eafcc91432c> replaced VIR_STRDUP
by g_strdup which made the error: path mostly useless.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The issue was introduced together with the function itself by commit
<da1eba6bc8f58bfce34136710d1979a3a44adb17>. Calling
`virDomainObjGetPersistentDef` may return NULL which is later passed
to `virDomainDefFormat` where the `def` attribute is marked as NONNULL
and later in `virDomainDefFormatInternalSetRootName` it is actually
defererenced without any other check.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Leftover after commit <479a8c1fa1e0f58d3165c0446cd1abd72160256e>.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Libvirt's backup code has two modes:
1) push - where qemu actively writes the difference since the checkpoint
into the output file
2) pull - where we instruct qemu to expose a frozen disk state along
with a bitmap of blocks which changed since the checkpoint
For push mode qemu needs the temporary bitmap we use where we calculate
the actual changes to be present on the block node backing the disk.
For pull mode where we expose the bitmap via NBD qemu actually wants the
bitmap to be present for the exported block node which is the scratch
file.
Until now we've calculated the bitmap twice and installed it both to the
scratch file and to the disk node, but we don't need to since we know
when it's needed.
Pass in the 'pull' flag and decide where to install the bitmap according
to it and also when to register the bitmap name with the blockjob.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The NBD server used to export pull-mode backups doesn't have any other
form of client authentication on top of the TLS transport, so the only
way to authenticate clients is to verify their certificate.
Enable this option by defauilt when both 'backup_tls_x509_verify' and
'default_tls_x509_verify' were not configured.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1879477
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The migration stream connection and also the NBD server for non-shared
storage migration don't have any other form of client authentication on
top of the TLS transport, so the only way to authenticate clients is to
verify their certificate.
Enable this option by defauilt when both 'migrate_tls_x509_verify' and
'default_tls_x509_verify' were not configured.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1879477
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Chardevs don't have any other form of client authentication on top of
the TLS transport, so the only way to authenticate clients is to verify
their certificate.
Enable this option by defauilt when both 'chardev_tls_x509_verify' and
'default_tls_x509_verify' were not configured.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1879477
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If both "vnc_tls_x509_verify" and "default_tls_x509_verify" are missing
from the config file the client certificate validation is disabled. VNC
provides a layer of authentication so client certificate validation is
not strictly required.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Store whether "default_tls_x509_verify" was provided and enhance the
SET_TLS_VERIFY_DEFAULT macro so that indiviual users can provide their
own default if "default_tls_x509_verify" config option was not provided.
For now we keep setting it to 'false'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Typecast the controller type variable to the appropriate type and add
the missing controller types for future extension.
Note that we currently allow only unplug of
VIR_DOMAIN_CONTROLLER_TYPE_SCSI thus the other controller types which
are not implemented return false now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Iterate through hostdevs only when the controller type is
VIR_DOMAIN_CONTROLLER_TYPE_SCSI.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The tests which match the disk bus to the controller type were backwards
in this function. This meant that any disk bus type (such as
VIR_DOMAIN_DISK_BUS_SATA) would not skip the controller index comparison
even if the removed controller was of a different type.
Switch the internals to a switch statement with selects the controller
type in the first place and a proper type so that new controller types
are added in the future.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1870072
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically we've added them in chronological order, but certain
articles are more likely to be needed and thus are easier to find when
placed earlier.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Re-style the knowledge base to look like the 'docs.html' page.
We still have room to add one more column.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
page.xsl was adding '<div id="content">' wrapper for the content picked
up from the <body> element from the original input file. Optionally
class="$DOCNAME" was added for some documents taken from <body>.
Since docs generated from RST by docutils have a '<div class='document'
id='$DOCNAME>' we actually don't need an extra wrapper for them.
Additionally if we standardize on one of them we can use the same styles
for both. I've picked the latter because it makes more sense to use the
document name as 'id'.
This patch:
1) Modifies the XSL trasformation to add the wrapper only if it's not
present.
2) Modifies the XSL transformation to use 'id' for document name and
class='document' for the wrapper element.
3) Changes docs.html/index.html/hvsupport.html to use 'id' instead of
'class' for document name.
4) Modifies the main stylesheet to keep styling the elements properly
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Split the existing list of kbase articles into a 'Usage' category and
into 'Internals/Debugging'. This will later represent the two columns on
the web page.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The container was used to apply CSS classes to the content, so the looks
are degraded. The idea is to have a similar layout to the 'docs.html'
page with multiple columns, which will be added later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move docs/kbase.rst to docs/kbase/index.rst so that the directory itself
shows our index page rather than the autogenerated list of files by the
webserver.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The anchors are based on the article or chapter headers, thus they are
not 100% permanent. Especially with pages generated from RST.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
XSLT transformation generates the page title from the topmost <h1>
element which is not present in 'docs.html.in'. Add it and hide it in
the CSS.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While it's certainly good to log events like "failed to close fd"
and "tried to close invalid fd", which are likely to be the
consequence of some bug in libvirt, logging a message every single
time a file descriptor is closed successfully is perhaps excessive
and can lead to useful information being missed among the noise.
Log filters don't help in this situation, because filtering out all
of util.file is too big a hammer and would cause important messages
to be left out as well.
To give an idea of just how much noise this single debug statement
can cause, here's a real life example from a quite large libvirtd
log I had to look at recently:
$ grep virFile libvirt.log | wc -l
1307
$ grep virFile libvirt.log | grep -v 'Closed fd' | wc -l
343
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Before commit 24d8968c, virDirClose took a DIR**, and that was never
NULL, so its declaration included ATTRIBUTE_NONNULL(1). Since that
commit, virDirClose takes a DIR*, and it may be NULL (e.g. if the DIR*
is initialized to NULL and was never closed).
Even though virDirClose() is currently only called implicitly (as the
cleanup for a g_autoptr(DIR)), and (as I've just newly learned) the
autocleanup function g_autoptr will only be called if the pointer in
question is non-null (see the definition of
_GLIB_AUTOPTR_CLEAR_FUNC_NAME in
/usr/include/glib-2.0/glib/gmacros.h), it does still cause Coverity to
complain that it *could* be called with a NULL, and it's also possible
that in the future someone might add code that explicitly calls
virDirClose.
To eliminate the Coverity complaints, and protect against the
hypothetical future where someone both explicitly calls virDirClose()
with a potentially NULL value, *and* re-enables the nonnull directive
when not building with Coverity (disabled by commit eefb881) this
patch removes the ATTRIBUTE_NONNULL(1) from the declaration of
virDirClose().
Fixes: 24d8968cd0
Reported-by: John Ferlan <jferlan@redhat.com>
Details-Research-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Laine Stump <laine@redhat.com>
A bad merge while rebasing 74b2834333 caused the @event variable
to be defined twice, inside the 'cleanup' label, causing coverity
errors.
This code was originally moved outside of the label by commit
773c7c4361. Delete the unintended code in the 'cleanup'
label.
Fixes: 74b2834333
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Rationale for the changes:
* access can be filtered out entirely, as nothing very
interesting is produced by the only other component in the
same package (access.accessdriverpolkit);
* util.udev doesn't exist.
Related filters are also more consistently grouped together.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
After e4c29e2904 the function has one argument more and the
argument that can't be NULL moved from second to third position.
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>